Why can I load only 8 models into a program

Hi, i have a java progrem , and i work with NCSA portfolio , or Starfire 3DSLoader (i tried them both)
and the loader , lets me load every time only 8 models simultanitly, when i load more than 8 , it just doesn't show them , until i remove other loaded models (from the 8 loaded)
what can i do to fix it?
plz help

It's like this - I wanted to let the user choose a model , from a variety of 20 models ,
so i craeted a jframe , and within i added 20 jpanels , and each jpanel , had a model loaded into him (with Canvas3D...)... Now , when i run the program , only 8 models are shown in their jpanels , and all the other jpanels are blacked out (the model is there , but just doesn't show)...
Now when I remove a working jpanel in runtime (that has a model in it ) , then one blacked jpanel, is now working, and the model inside is shown...
that's how i figured out, he let me load only 8 models each time....
How can i solve tshi problem????????
(I tried to work both with Starfire 3DS loader , and with NCSA porfolio , and in each of the the problem occured)

Similar Messages

  • Can't load Raw files into Lightroom 3 form my Nikon D7100

    Can't load Raw files into Lightroom 3 form my Nikon D7100... Why?

    TGTruman wrote:
    How do I convert the Nef to DNG files...
    Download the Adobe DNG Converter (and install it, and run it...).
    Note: an internet search will reveal a link in short order.
    TGTruman wrote:
    I don't mind going to LR5, just don't want to spend the money and then not have it work...
    So use the trial first. No?
    R

  • Why can i see only one picture in the illustration windows with iTunes 10.5.1?

    why can i see only one picture in the illustration windows since iTunes 10.5.1?

    Assuming Apple doesn't eviscerate the files of the secondary graphics with another upgrade, there could be a plug in that reads the graphic and runs along side iTunes..we should get someone or Apple to program an alternative If we have to accept this downgrade in iTunes proper.
    I've developed a quick workaround, and am still hoping Apple will fix this!
    Go To Get Info on the tune you want to see secondary artwork for.
    Go To the Artwork tab
    Drag the back cover to the desktop, and it will create a new jpg you can open with quick viw or prieview where you can see it large!
    you end up with a lot of jpgs on the desktop to discard!

  • Why can I not convert pdf into word file?

    why can I not convert pdf into word file?

    This is not a feature of Adobe Reader. You'll need either Acrobat or a subscription to one of the web-based services that Adobe offers (like PDF Pack) to do it.

  • Why can't i attach documents into my email? I am currently using OS X 10.5.8

    Why can't I attach documents into my email? I am currently using OS X 10.5.8

    You can call Apple with the Serial# handy, & possibly get the original Install Discs cheap, or...
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least, more if you can afford it)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    It's been reported that if you have a MobileMe account, it may be free from Apple.

  • Can I load a vi into memory programmatically

    Here's the situation (I'm programming in LV7.1)...
    I've got a program that runs, which uses the DSC.  I'm wanting to programmatically shut down and quit the Tag Engine when the program ends.  My problem is that when I use "Engine Shutdown.vi", all vi's that use the tag engine have to shutdown before the Tag Engine will completely shut down.  If I call this an wait (monitoring engine status for shutdown), then I get a deadlock error.  If I call this and end the program, then I get a pop up asking if I want to "Stop and close Tag Engine" (and for some reason an error afterwards as well, doesn't describe error, just that a log is being created.)  My goal is to have to pop up or dialog boxes appear that the user has to interact with when shutting down.
    So the solution that I believe would be appropriate for this would be to close the main program and have a separate vi (that is independant of the main program structure) call the "Engine Shutdown.vi", then quit itself, closing LV.  So I've been messing around with this...
    "Open VI Reference" with the vi path connected as an input (just a simple vi I made to kill the Tag Engine, wait until it falls, then kills Labview).  This is connected to an "Invoke Node" with the 'Run VI' method selected, property 'Wait until done' set to False, and 'Auto Dispose Ref' set to True.
    This works all fine on my developement machine, but I imagine I'm going to have issues when compiling this and installing it onto it's target machine.  How would I compile this?  If I add this vi to the build as a Dynamic VI will it automatically be loaded into memory when the program runs (on the target computer)?  If not, is there any way I can programmatically load this vi into memory in such a way where it is not a subvi to my program (else it will have same issues shutting down Tag Engine)?
    As always I appreciate everybody's help,
    Sean

    Mike, thx for your response.  Let me run this by you...
    So if I put Main.vi and Kill Engine.vi in the same folder on my developement machine, have the attached snippet of code execute when Main.vi is ready to shut down (very last thing to run, after all loops conclude) build the app (with Kill Engine.vi as a Dynamic VI), and install the app on the target machine, does it sound by you that this will work?  (Kill Engine.vi is the simple vi I made to shutdown and quit the Tag Engine, wait for this to conclude, then exit Labview).
    Thanks,
    Sean
    Attachments:
    snippet.JPG ‏8 KB

  • Why can one spot colour convert into two different sets of CMYK values?

    Working within Illustrator CC, I have an EPS file of a logo which has a colour fill value of:
    Pantone 152 U
    CMYK: 0C 51M 100Y 1K
    When I copy and paste this into a new document I get a much duller colour (orange) with colour values of:
    Pantone 152 U
    CMYK: 2C 57M 83Y 2K
    I have enabled 'ask when opening' & 'ask when pasting' for Profile Mismatches in Edit->Color Settings->'Color Management Policies' - no warning shows up.
    I have also tried turning off, changing color management policies.
    I've opened the original eps file and assigned my working space profile (Coated FOGRA39) and then try copy and pasting without success.
    Help!

    In addition to John's useful comments:
    Using Pantone 512U (uncoated) isn't correct for Coated Fogra.
    Why can one spot color convert into two different CMYK sets if converted by the user?
    Assumed, the one spot color is uniquely defined by one Lab set:
    – the CMYK spaces are different
    – the CMYK spaces are the same but the Rendering Intents are different
    – the CMYK spaces are the same but the Black Point Compensations are different
       (on or off for Relative Colorimetric).
    Assumed, the spot colors are equal by name, but valid for different versions, both in Lab:
    – this obviousl at present the most common source of deviations.
    Assumed, the spot colors are defined by CMYK:
    – a chaotic situation which I wouldn't even like to dicuss.
    – CMYK to CMYK conversions should be avoided under all circumstances.
    The solutions:
    If the spot color will be printed always and everywhere by Pantone spot ink:
    – purchase an actual Pantone color fan und discuss with the printer the mixture for the selected ink.
    If the Pantone color is merely a design feature, but the doc will be printed by CMYK:
    – choose such a color and verify by soft proofing that the color is in-gamut for common CMYK spaces. 
    – read the Lab values and proceed as far as possible using Lab.
    – don't use ink names, don't use any reference to Pantone.
    – convert into to a specificic CMYK space in advance to the generation of the specific PDF.
    Best regards --Gernot Hoffmann

  • Why can I text only 1 person on my iPad and no one else?

    Why can I text only 1 person on my iPad? If I try 2 text someone else it automatically says the message wasn't delivered

    iPad can only use iMessage which is limited to only Apple devices and registered iMessage addresses.It does not do SMS (standard cell phone text ) messaging.
    http://help.apple.com/ipad/7/#/iPad70482978

  • Why can I not update my CS 6 programs to Mac OS X

    I am having problems with updating the latest Updates for my CS 6 programs *here PS and Ill. fx. And the notice says to contact costumer support, but only get a few Q's and A's.
    HOW do I get in direct contact (or chat/mail) with costumer service of ADOBE_

    Hej again Steve
    Ok sorry again
    But you seem to be quite into this field. (and I've unfortunately been
    'out' for a while). I used to be up to date, but now, it's all moving so
    fast, and if you're away for a few years then you're (screwed)
    I've been trying to get in touch with Adobe mostly for 1. update of my
    programs because I seem to have a lot of 'faults' in each (crashing, screen
    moving and such)
    BUT 2. also because I want to join CC and with the 40% off (as I have an
    original CS) but when I enter info, it will not accept my serial nr. NOW
    after your guidance I came across this site which shows that I am granted a
    ''free'' CC. Am I reading this right. _ ? I am no idiot, but yes, in the
    computer field _ I am a designer and a damn good one, but all the techichal
    (that is another language _ and heck, we all have our fields_ I go to a
    mechanic to get my car fixed, you?
    Just smiling
    Look forward to hear from you
    Athena
    2014-05-25 22:33 GMT+02:00 Athena Windelev <[email protected]>:
    Thank you Steve / at least it seems that I can get a ''chat'' going.
    A few years ago I could mail them but now not that and no phone (or rather
    when I call long distance I never get thru) what I most want is personal
    contact. Because even if they list 20 or something common Q and A's mine do
    not follow in on any of the categories. BUT thanks again for the link.
    Maybe you can help me with others ... Just a thought
    I\m trying to upgrade my PS, ID and Illustrator CS6 / and I know from
    previous Adobe guidance, one should not just take the latest. I seem to be
    successful with my ID (but yet to prove when I test it, which I haven't had
    time to yet) BUT my PS and Ill come up with this (see attached file).
    Hope you can help. Anyway, you have so far.
    Because you see - I have an original CS6 and want to upgrade to CC soon.
    AND they offer a 40% discount if you already have the original. BUT when I
    type in my serial nr. it won't register this. I've been trying (no kidding)
    for a year now, if not longer. AND this is not in one of their Q and A's
    Best
    Athena
    >
    >
    2014-05-25 18:50 GMT+02:00 Steve Werner <[email protected]>:
        Why can I not update my CS 6 programs to Mac OS X  created by Steve
    >> Werner <https://forums.adobe.com/people/Steve+Werner> in *Creative
    >> Suites* - View the full discussion<https://forums.adobe.com/message/6407979#6407979>
    >>

  • Why can't i download full versions of programs after i purchased them?

    why can't i download full versions of programs after i purchased them?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Why can't I activate my Dreamweaver CS3 program on my new computer?

    Why can't I activate my Dreamweaver CS3 program on my new computer?

    After 4 hours of searching on internet and trying to be in contact with Adobe support, I found this forum with people with the same problem i have.
    I need to deactivate Acrobat Web Premium CS3 on an older XP machine and activate it on a new Win7 Enterprise.
    The application is on both machines successfully installed/registered and I can continue to click on Help | activate/deactivate (On both machines activate and deactivate is not greyed out),
    but I’m receiving the message Activation - No Connection
    I’ve checked the internet connection, proxy server  and host file, all are correct.

  • Can't import CAD model into Robotics Simulation Model Builder (LV2012)

    Ok, this is starting to get rather aggravating. I can't successfully import even the most basic CAD model I create (from Solidworks) into the Robotics Simulation Model Builder. I've tried several, ranging from a complex assembly to the most basic cylinder. I've tried .stl and .wrl files, and I always get the same result. It's an error saying that 'the converter cannot load the input file properly'.
    Anyone have any ideas? I've reviewed quite a bit on the simulator and there's nothing specific (at least not that I've found) in regards to errors when loading CAD models. I know the acceptable file types (.ive? Really NI? I'd never even heard of OpenSceneGraph!), and I can load some parts from a shipping example, but nothing custom.
    My goal here is to create a Stewart platform simulator, and the shipping example for same is where I got some of the original models I imported. Since I can't programmatically parse the XML file that is used in the shipping example (yeah, thanks for the bizarre schema, guys) in order to accurately determine joint end locations, I tried building my own model. No luck yet.
    Help!

    Ryan,
    I understand that the direct import of .stl files isn't supported, I just tried it out of frustration, and only then because some of the shipping examples (OmniRobot, for example) make use of them. Attached are a screenshot of the cylinder model, the .wrl file (renamed to .txt in order to attach, just change the extension back) created from the cylinder model, and a screenshot of the error dialog.
    You'll see that I have a material property applied to the cylinder, it's stainless steel. I've tried an even simpler cylinder with no material specified, same result.
    Thanks for trying to help.
    Attachments:
    Cylinder.jpg ‏46 KB
    Converter Error Dialog.jpg ‏12 KB
    test.txt ‏34 KB

  • Aperture 3 why can't i drag projects into folder

    Hi. Im using aperture 3.4.3 and I  can't i drag projects into folder. Why is this? Help!

    Projects can only go into folders that are not under other projects. So for example
    Library
         folder
              project
    is OK
    but
    Library
         project
              folder
                   project
    Is not OK (the last project won;t go)
    So if you create a folder at the top level can you drag a project into it?

  • Why can I sometimes paste text into a revision history dialog box and other times cannot?

    Why can I sometimes paste copied text (from another VI's revision history, for instance or from anywhere else) into a revision history dialog box and other times cannot? All versions of LabVIEW! It's something like the control key becomes diabled. I've noticed the same thing when saving many VI's at once, some will let you paste into revision history and others will not. Aren't all VI's created equally when it comes to revision history? All versions of LabVIEW since 3 have plagued me with this problem.

    Hello,
    If you'd like to add text to the revision history of a VI, you can
    paste into the Comment box and add all of your text at once.  The
    history itself can be read from this window, but cannot be directly
    edited.  The History field is read-only in the dialog box. 
    If you feel this should not be the case, your best course of action is
    to express your desire for added functionality to our developers on the Product Feedback page of our website.
    Message Edited by MattP on 12-19-2006 12:04 PM
    Cheers,
    Matt Pollock
    National Instruments

  • Can I load a swf into my Flex app that loads other swf's?

    The code below loads an AS2 swf into my Flex mobile for IOS app and it works.  If that AS2 swf has like a circle in it that runs across the stage, it loads and displays properly when run in FlashBuilder.
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                                     xmlns:s="library://ns.adobe.com/flex/spark"
                                     xmlns:mx="library://ns.adobe.com/flex/mx"
                                     initialize="init()">
              <fx:Script>
                        <![CDATA[
                                  import mx.core.UIComponent;
                                  private var request:URLRequest = new URLRequest("http://PATH_TO_AS2_SWF");
                                  private var loader:Loader = new Loader();
                                  private var myComponent:UIComponent = new UIComponent; 
                                  private function init():void{
                                            myComponent.percentHeight = 100;
                                            myComponent.percentWidth = 100;
                                            loader.load(request);
                                            myComponent.addChild(loader);
                                            player.addElement(myComponent);
                        ]]>
              </fx:Script>
              <s:Group id="player"
                                   height="100%" width="100%"/>
    </s:Application>
    But if that AS2 swf loads other swf's, they don't load or display.  My FlashBuilder debugger reports no errors or security sand box violations.   I'm using the most elemental code in my AS2 swf so as to not cause problems.  This is it in its entirety:
    this.onLoad = function(){
              _root.loadMovie("http://[PATH_TO_REMOTE_SWF]");
    The paths to the remote content are fine because swf's load and display fine from AS2 swf when run on it's own - not embedded in Flex app.  They also load and run fine if I cut out the AS2 swf and access directly from my Flex code.  So I know there isn't a path issue.  More likely not accessing the right layer in the AS2 swf from Flex or something.  Or maybe security sandbox violation but I don't see anything reported in the FlashBuilder debug console.  When run console just reports:
    [SWF] SwfMobile.swf - 2,639,761 bytes after decompression
    [SWF] assets/swf/AS2.swf - 1,470 bytes after decompression
    Is there something inherently wrong with loading swf's that load other things?  Even if I have the AS2 swf load jpgs they don't load so the format of the target content at the end of the chain doesn't seem to be the issue.  Just the act of embedding a swf that loads other things seems to be the problem.

    Ah, yes. Using an AVM1 SWF could prove difficult...
    I'm going on about 3 hours of sleep at the moment, but let me toss out a few thoughts I have and hopefully something will stick...
    Ok, so my first thought what to try and cast the loaded content as a MovieClip and call methods on that, but the fact they are AVM1 throws that out the window.
    That leaves LocalConnection, as you mentioned. But this would require you to have code on the receiving end to handle the connection... no good either.
    But what if you created a "bridge" in AS2 that holds all the code for the receiving end of LocalConnection (or has the control logic itself, perhaps even eliminating the need for LocalConnection all together!). I think maybe this is what you were trying to do already by loading a SWF into a SWF? Well instead of loading your bridge at runtime, what if you statically linked it into your project as a class?
    *a few moments later*
    Well it looks like you can in fact link in a a symbol created for AVM1, but it will only come in as a SpriteAsset, and will not include any custom code (which makes sense, since they use entirely different class constructs).
    To do the test, I created a symbol exported for actionscript (AS2/Flash8), then linked it in with a CSS style embed. I then instantiated the class and called describeType on it.
    So in summery, it looks like calling custom code on the bridge is out (I did not test this extensively, that was just my first impression with this simple test). However, if you may be able to perform the actions you need by attempting to cast the loaded content into something AVM2 can recognize. Apparently it does this automatically when linked in statically, so maybe there is something there worth looking into... mainly, can you do what you need using only the base class and no custom code?
    Keep me posted!

Maybe you are looking for