Why is my bill so much?

I recently called costumer service about how much my data usage went up and made some changes to my account. From what I understand the agent told me I would be saving at the end and the total was going to be a little over 420. How did I get charged over 800?

Only you can look at your bill on the online account and see where the increases are. Compare your current bill to your previous bill and see where the difference lies.

Similar Messages

Why is my bill so confusing!? Can't it be simpler?

On October 23rd I purchased an iPhone 5S from Verizon Wireless, and started a Unlimited Talk & Text (2GB) plan with Wireless Phone Protection from Asurion. The monthly charges are $88.73. The total amount paid to activated the account, pay the first monthly charge, and purchase the iPhone 5S was $136.55 which was paid in full. After my phone arrived I changed my phone number from a temporary number that a Verizon customer service agent had set me up with, and then ported in my regular number - closing the other line. At this point the Oct-Nov bill was paid in full at $136.55.
After a week or two of enjoying my new Verizon Wireless service I decided to check my next bill in advance. Due in Nov-Dec was $119.44. This is a lot different than the monthly charge of $88.73 I was expecting to pay. I began scanning through my statement trying to figure out what the $30 difference was for. I discovered that I had a 1GB overage on my data plan, and the fee was $15. Okay, that explains half of it. What about the other $15? I called Verizon Wireless support, and spoke to someone who explained to me that because I had changed plans in the middle of the month that overage was charged on both plans. Baffled, and confused I tried to explain that I had made no changes to my account other than changing from a temp number back in October. Apparently not listening to what I had just said, she then stated that she was sorry I wasn't aware that changing plans in the middle of the month can cause fees to carry over onto a new plan. She added a credit of $30 to my account that would show up on the Dec-Jan bill. Well that doesn't help me much, or explain anything! She still didn't understand that I had not changed plans!
Knowing my balance of $119.44 is still due in just a few days I decided to be very conservative getting a few groceries for the week this morning. Upon checking out at the register my debit card was declined. I paid with credit instead, and decided to check on my Wells Fargo account using the iPhone app. There was a $89 charge from Verizon Wireless that had nearly emptied my checking account. Confused yet again I go home to see if there was a change in my $119.44 balance, and there was not. Lo-and-behold the $119.44 is still due by this weekend.
So as you might imagine I'm extremely confused at this point. I have paid plenty of bills online with many different services. I don't understand why my Verizon bill is so confusing.

eschmidt, we always want you to understand where each charge is coming from. I understand being a consumer myself how concerning it is when an unexpected charge shows up. Here is a link that will help better understand your paper bill http://www.verizonwireless.com/support/understanding-paper-bill-video/ .
JorgeO_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Why am I charged so much for Broadband???

I've just looked at my bill and I'm being charged £28.35 a month for my broadband, but the most expensive package I can find on BT.com is £26 and that includes Infinity - I only have an old 2.0 homehub...
The billing info pages aren't very helpful so I can't find out why I'm paying so much. Any ideas?

It's not the model of homehub that determines your bill, it's which package you are on. You may also have your line rental included in that figure. Line rental is about £15. If you contact Live chat should be able to explain your bill to you.
See this link for broadband packages to establish which you are on or its equivalent
http://www.productsandservices.bt.com/products/broadband/packages
Link to live chat
https://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums

Phone bill to much money

My phone bill is 600 dollars for just my little pink iPhone. I have rent to pay also, and can't afford my bill. Is there a way to set up a payment plan since 600 is an extremely large bill just for one phone??

Why is your bill so high? Are you using way too much data over your data plan?

Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

Hi there ethangabe,
You may find the information in the article below helpful.
Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
http://support.apple.com/kb/ht2589
-Griff W.

Why is Firefox writing so much data all the time?

I am running Windows 7 x64 and Firefox 8. In my Task Manager I display the I/O Write Bytes of all processes. I have found that Firefox is ALWAYS the Process with the largest amount of write bytes after it has been running an hour or so even though there are dozens of other processes there. The only Web page is Google and all of my plugins are disabled.
Why is Firefox writing so much data all the time?

Firefox may be updating the phishing protection database or do maintenance with other files like places.sqlite. It should stop at some point if that has been done.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem.
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why did apple mail get much worse with lion osx? I can't add recipients without copy and paste?

why did apple mail get much worse with lion osx? I can't add recipients without copy and paste?

I went through updates on my three newest Macs this week. As I stated I'm talking about iTunes 10.5.1 (42). I am checking for updates now and I see 10.5.2 is now available. I'll know in about 15 minutes if this issue is fixed or not.
15 minutes later:
I must have updated this PPC G5 a day or two before iTunes 10.5.2 came out. I was able to update to 10.5.2 (11) and this copy/paste bug is fixed. I'm happy again.
Tracy

Why is apple Australia so much MORE expensive than America!?

so tell me, Why is apple Australia so much MORE expensive than America!? i have been meaning to pick up a new imac.....and i saw that the exact same type of imac that i want i could pick up in America for a good $600 LESS.... you know, even though our dollar is HIGHER THAN AMERICA'S! *** APPLE!

Reasons:
Australian import duties
Australian taxes on foreign imports
Australian VAT
Got complaints? Talk to your politicians. Apple has nothing to do with it.

Why this Query is taking much longer time than expected?

Hi,
I need experts support on the below mentioned issue:
Why this Query is taking much longer time than expected? Sometimes I am getting connection timeout error. Is there any better way to achieve result in shortest time. Below, please find the DDL & DML:
DDL
BHDCollections
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BHDCollections](
[BHDCollectionid] [bigint] IDENTITY(1,1) NOT NULL,
[GroupMemberid] [int] NOT NULL,
[BHDDate] [datetime] NOT NULL,
[BHDShift] [varchar](10) NULL,
[SlipValue] [decimal](18, 3) NOT NULL,
[ProcessedValue] [decimal](18, 3) NOT NULL,
[BHDRemarks] [varchar](500) NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_BHDCollections] PRIMARY KEY CLUSTERED
[BHDCollectionid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
BHDCollectionsDet
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[BHDCollectionsDet](
[CollectionDetailid] [bigint] IDENTITY(1,1) NOT NULL,
[BHDCollectionid] [bigint] NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](18, 3) NOT NULL,
[Quantity] [int] NOT NULL,
CONSTRAINT [PK_BHDCollectionsDet] PRIMARY KEY CLUSTERED
[CollectionDetailid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Banks
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Banks](
[Bankid] [int] IDENTITY(1,1) NOT NULL,
[Bankname] [varchar](50) NOT NULL,
[Bankabbr] [varchar](50) NULL,
[BankContact] [varchar](50) NULL,
[BankTel] [varchar](25) NULL,
[BankFax] [varchar](25) NULL,
[BankEmail] [varchar](50) NULL,
[BankActive] [bit] NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_Banks] PRIMARY KEY CLUSTERED
[Bankid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
Groupmembers
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[GroupMembers](
[GroupMemberid] [int] IDENTITY(1,1) NOT NULL,
[Groupid] [int] NOT NULL,
[BAID] [int] NOT NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_GroupMembers] PRIMARY KEY CLUSTERED
[GroupMemberid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_BankAccounts] FOREIGN KEY([BAID])
REFERENCES [dbo].[BankAccounts] ([BAID])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_BankAccounts]
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_Groups] FOREIGN KEY([Groupid])
REFERENCES [dbo].[Groups] ([Groupid])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_Groups]
BankAccounts
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BankAccounts](
[BAID] [int] IDENTITY(1,1) NOT NULL,
[CustomerID] [int] NOT NULL,
[Locationid] [varchar](25) NOT NULL,
[Bankid] [int] NOT NULL,
[BankAccountNo] [varchar](50) NOT NULL,
CONSTRAINT [PK_BankAccounts] PRIMARY KEY CLUSTERED
[BAID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Banks] FOREIGN KEY([Bankid])
REFERENCES [dbo].[Banks] ([Bankid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Banks]
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Locations1] FOREIGN KEY([Locationid])
REFERENCES [dbo].[Locations] ([Locationid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Locations1]
Currency
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Currency](
[Currencyid] [int] IDENTITY(1,1) NOT NULL,
[CurrencyISOCode] [varchar](20) NOT NULL,
[CurrencyCountry] [varchar](50) NULL,
[Currency] [varchar](50) NULL,
CONSTRAINT [PK_Currency] PRIMARY KEY CLUSTERED
[Currencyid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
CurrencyDetails
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[CurrencyDetails](
[CurDenid] [int] IDENTITY(1,1) NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](15, 3) NOT NULL,
[DenominationType] [varchar](25) NOT NULL,
CONSTRAINT [PK_CurrencyDetails] PRIMARY KEY CLUSTERED
[CurDenid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
QUERY
WITH TEMP_TABLE AS
SELECT     0 AS COINS, BHDCollectionsDet.Quantity AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'Currency') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)
UNION ALL
SELECT     BHDCollectionsDet.Quantity AS COINS, 0 AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'COIN') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)),
TEMP_TABLE2 AS
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM TEMP_TABLE Group By CollectionDate,DSLIPS,Bankname
SELECT CollectionDate,Bankname,count(DSLIPS) AS DSLIPS,sum(BN) AS BN,sum(COINS) AS coins FROM TEMP_TABLE2 Group By CollectionDate,Bankname
HAVING COUNT(DSLIPS)<>0;

Without seeing an execution plan of the query it is hard to suggest something useful. Try insert the result of UNION ALL to the temporary table and then perform an aggregation on that table, not a CTE.
Just
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM
#tmp Group By CollectionDate,DSLIPS,Bankname
HAVING COUNT(DSLIPS)<>0;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints?

Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints? Even if I enter the same finger 5 times, it only works once or twice.

Try this -> http://m.facebook.com
which is the mobile optimized page of FaceBook.

Why am i using so much data since downloading IOS8

why am i using so much data since downloading IOS8

Don't know -- but you can do a little detective work by going to Settings > Cellular and look at the apps in the section titled "Use Cellular Data For." Each app that has used data will show the amount used since the statistics were last reset. If you tap on "System Services" at the bottom of that list it will show the details of system usage. You can reset the statistics at the bottom of the screen. Checking those numbers for a while should help identify what is going on.

Why do I get so much noise when creating a real instrument track?

Why do I get so much noise when creating a real instrument track?

Creating a real instrument track is a very silent matter normally. Once you start recording, you can indeed pick up noise - but that depends on what you're recording, how you're recording etc. - you didn't tell us anything about it.

Why do I have so much storage 'other' on my iPhone 5, ios7?

why do I have so much storage 'other' on my iPhone 5, ios7?

Hi: I had the same issue. I believe mine was due to the fact that I always installed software updates over wifi. I believe doing so did not remove the old software from my phone, which then took up space in Other. Here's why I think this.
Yesterday, I had 6.2 GB of Other (on my 16GB iPhone). Got the alert that a software update was available, but didn't have enough free space on my phone to update it over wifi. I plugged my phone into my Mac today and ran the update on iTunes and the Other went down to 2.1 GB. Note, when I previously updated software over wifi, it took about 3 minutes, today when I updated it by actually plugging into iTunes on my Mac, it took about 15 minutes. It cleared everything off my phone and reinstalled it.
I'm not sure if this is the only reason for the Other storage to be high, but if you update over wifi, it could be. Note: if you're not due for an update, you may want to try resetting your phone and doing a restore from iTunes. Be sure to back up your phone before doing this!
Hope this helps.

Why do i have so much other on my phone and how do i get rid of it

why do i have so much other on my phone and how do i get rid of it

Other is usually around 1 GB...
A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414
More Info Here...
maclife.com/how_remove_other_data_your_iphone

Why do i have so much spam

Why do I have so much spam in my in box

Hi,
Probably because you have visited many places and entered your email address to one place somehow. Normally you have to use filter(s) in your email agent/client to filter spams. I have to use filters for my gmail, yahoo and hotmail (Windows live) ... and they are very good. You may want to do the same.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why is my bill so much?

Similar Messages

Maybe you are looking for