Wierd issue with new E3000 switch port

Hello all. I installed a new E3000 about a week ago. I flashed the firmware to the newest version and it installed fine. I have 6 devices total on the router, 3 wireless and 3 wired. Everything has worked more or less fine except for my one desktop computer. It is plugged into port 1 on the router and is gigabit.
I use Soulseek alot. While using Soulseek yesterday, I decided to log into Warcraft. I was logged in for about 3 mins and then was disconnected and at the same time most of the SS upload/downloads timed out. I look at the router and the #1 port seemed to blinking normally, but then it turned from green to blue really fast, then went out, then came back on. I rebooted the router and then limited my upload in Soulseek. After about 10 mins it did it again.
Windows still said i had an internet connection and i could get some traffic but it kept dropping the connection in warcraft while doing these things at the same time: and i have Warcraft as my only QoS.
So I rebooted the router, opened SS and went to work. When I got home at lunch the router was doing the same thing. No one was here so the only application running was Soul Seek. It was again doing the weird blinking thing on the gigabit port and timing out on uploads to Soulseek (only uploads were active at the time).
Any ideas on what this is? Upnp? What can I do to fix this? thanks.
Also: my N laptop is only showing the wireless link at 65 mb/sec.

You might need to open the ports for your game. To know the ports you need, try checking their website. To open the ports, click here.

Similar Messages

Wierd issues with creative champion pcie

hi,
i just spent a few bucks on this awesome new soundcard and i've had nothing but problems after i bought it, it worked the first day after 3 driver reinstalls and by using windows update i finaly got it working! but the problems are not finished, i have cracking sounds and noises all the time when i play games and hear music, sometimes the music levels drop so it sound like music phases out, i dont have these problems with my stock motherboard sound, i also turned off the feedback thing for mic so it wont interfer with my speakers, so i have no idea what im doing wrong, i've tried disabling the stock soundcard (supremexfi) in bios and removed it completely and it didnt fix it the issues at all, i also pushed the cables from card to the I/O as hard as possible without breaking anything and i have the same issues without any changes, so im completely lost now on what to do
if anyone got some suggestion it would be great, or else i have to return this card and get my money back, because this isent what i paid for..
system:
Windows 7 home premium 64bit
4gb ram, 066mhz corsair dominator
asus rampage formula
intel QX6700
ATI sapphire vapor x 5870
X-Fi Titanium Fatalty Champion PCIe(with 2.7.7 driver)

,Re: wierd issues with creative champion pcieRsometimes it can be a bit bugged(in rare occasions noises) and i have to change from gaming mode to entertainment to fix that, and if i play any old title games it seems that sounds crackle all the time and i gotta do a full reboot to fix it.
so i really rounded up what to do and what to prevent(this happens with all drivers and its even worse with the newer ones so im using the very WHQL drivers from windows update)
looks like a RMA soon!
i appreciate the help! but not sure if i wanna make so many adjustments just to get some soundcard working.. just seem too much work for something i bought just to enjoy, sadly enough
creative: useless drivers, either fire the whole department or merge with asus is the only solution i can really predict would be a good change

Issues with a SGE2000 switch

It seems that the SGE2000 switch will lose the connections of systems after some period of time. I will ping a system and it will be slow or will not reply at all. See example below: C:\>ping 10.1.16.16 Pinging 10.1.16.16 with 32 bytes of data: Reply from 10.1.16.16: bytes=32 time=102ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Ping statistics for 10.1.16.16: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 102ms, Average = 25ms C:\>ping 10.1.16.16 Pinging 10.1.16.16 with 32 bytes of data: Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Reply from 10.1.16.16: bytes=32 time1ms TTL=63 Ping statistics for 10.1.16.16: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms I have made two changes; 1)The Aging Interval 630 the max. 2)Static MAC address entry. But nether of these changes have helped. Has anyone see issue with the SGE2000 switch? Thanks

Thanks for the info. I have the latest firmware on the switch and resetting it doesn't help. I am route 7 IP networks via this switch with 24 systems on each network. I have statically added some of the systems MAC addresses to see if that would help, but same issue.

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

It's hopelessly outdated. It's simply not compatible.
Mylenium

Logitech Keyboard Issues with Fast User Switching

I'm running OSX 10.4 on an 800 MHz iMac, and using a Logitech Cordless Navigator keyboard. The keyboard's main feature (for me) is the ability to have the function keys (F1-F12) automatically open applications and folders and such. When I have multiple accounts running though, this feature seems to be tied to whichever one I first logged into. If I switch accounts and try to use one of the keyboard shortcuts nothing happens where I am, but when I switch back to the original account I find that the keyboard has opened the program there. The keyboard types fine in the new account, and I can even change the preferences so the function keys do different things in the different accounts, but the extra functionality seems to be only available for whichever account logs in first.
I realize this may just be a Logitech bug, but any ideas how to fix this? (Also even though I'm the only one using my computer this seems like a mild security issue, if theoretically another user could activate programs on my account without the password.)
800 MHz iMac G4 Mac OS X (10.4.3) 768 MB RAM

Logitech support is frustrating:
Dear tajmahall14,
Thank you for your recent inquiry about your Keyboards.
I understand you are having issues with the settings for the function keys becoming non-functional when fast switching from one user account to another.
Depending on the system configuration, the Fast User Switching may or may not work. Unfortunately this is not an issue I can address. You may need to contact Apple to see if they have a possible solution to your problem.

Graphics/artifacting issues with new mid-2014 15" MacBookPro Retina

I'm having graphics issues with my new 15" mid-2014 2.8 MacBookPro Retina. It came with Yosemite. I keep get glitchy
artifacting when using Premiere Pro and After Effects (CC 2014), obviously, but then even just while using Finder when AE and PP are closed.
I've read about it with earlier models, but nothing about the new ones.
I turned off the Automatic Graphics Switching in Energy Saver and just updated my CUDA NVIDIA driver. It's still a problem. Any ideas on what to do next?
Thanks in advance.

Remove CUDA and see whether there's an improvement.
To remove CUDA, triple-click anywhere in the first line below on this page to select it:
/Library/Frameworks/CUDA.framework
/Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist
/Library/PreferencePanes/CUDA Preferences.prefPane
/System/Library/Extensions/CUDA.kext
/System/Library/StartupItems/CUDA
/usr/local/cuda
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Continue with the remaining lines. Some of the items may be absent, in which case you'll get a message that the file couldn't be found. After moving all the above items to the Trash, restart the computer and empty the Trash. Don't try to empty the Trash until you have restarted.
If you haven't already done so, back up all data before making any changes.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Server wont communicate with new network switch.

Hi, I hope someone can help.
I have a small office network running Macs with OS 10.6.4, HPs with Windows XP, and a mac mini server running 10.6.4 server, file sharing only.
DHCP and internet access etc is controlled by a Netgear ADSL router. All machines are connected by a 16 port 10/100 Netgear switch.
The problem is I replaced the switch with a 10/100/1000 switch and all machines connect fine except the server. This will not connect at all with the new switch, not even do any lights come on. However if I connect the server to the old 10/100 switch then to the new gigabit switch it connects fine but this defeats the purpose of the gigabit access to the server and the high speed macs on the network. The reason I upgraded in the first place! The standard Macs are Imac G5 Intel based late Snow leopard models and they have no trouble with the new switch.
Does Snow Leopard server somehow remember specific hardware on the network when setup? And needs to be changed to recognize the new?? I tried switching everything off and restarting the whole network.
I don't have a heap of knowledge but thought this should have been simple.
Any help would be greatly appreciated.
Cheers, paul

Thanks for the reply.
No it is not managed, No uplink port, uplink is auto controlled on any port.
I have swapped and swapped and swapped this is what led me to using the old switch on the server.
This is what happens.
Putting the server cable from the server into the new gigabit switch Tried with 300m cable directly next to it. No connection on any of the 16 ports. tried several cables including longer ones etc.
Now if I use the same cable from the gigabit switch to any port on the old switch then connect a cable from any other port of the old switch to the server. Connection, no problems at all. I.E the Old switch is uplinking to the new.
It is as if the server says "hey where is the old switch I can't work without it" Thats why I thought maybe OS X server kept some sort of register of the devices when it is initially setup and this may need to be changed.
Also any other computer works fine when placed at the same access point as the server including the Standard Snow leopard Macs.
I am thinking maybe to reinstall the server OS to see what happens?
Was supposed to be a simple job. Both switches are physically exactly the same. Pull a cable out of port 1 and stick it in port 1 of the new switch etc plug it in and turn it on????

Password issue with ESW 520 switches

I was wondering if anyone else has run into or noticed an issue with passwords using these switches. I've set up 5 or 6 in the past couple of months and have confirmed it is an issue with both the 2.0.3 firmware and the latest 2.1.16 firmware.
The issue is that you cannot use an & in a password. That is to say, you can use it when setting your new credentials for the switch but once set, you cannot login using this password any longer. I've tested these passwords over and over, making sure I didn't slip off the shift key by removing caps or substituting a 7 instead of the & symbol. I have NOT tried any other special characters but I can confirm that numbers work just fine.

Sounds like a bug Chris.
On Jul 9, 2010, at 10:29 AM, "c.holloway"

Issues with Small Business Switch config

Hi, I know that if I read the documentation I will come to the answers but I would really like some input from someone with more knowledge than me. I have an issue with Cisco SF300 , one of the Small Business Switches. I have a single interface on my router and I need to separate my internal networks , I thought that one way would be to use VLANs. On my two internal networks one network only has unmanaged D-Link switches, the other has the Cisco SF300 so I did as follows.
On the Cisco Switch, all ports default to Trunk ports. I have changed FE1-FE24 and GE1-2 to access ports.
Created two VLANS and placed FE1-FE24 in VLAN10 (also my management VLAN) , GE3 is a trunk Port for VLAN20 untagged, VLAN 20 uplinks to my DiLink Switches. This way traffic from my unmanaged switches comes in on a trunk port untagged on VLAN20.
GE4 is a trunk port and I have assigned VLAN1 untagged, VLAN10 tagged and VLAN20 tagged. VLAN 10 and VLAN 20 then forward to my Router.
The plan was to connect GE4 to my router however I had two things happen I can not explain.
Firstly as soon as I connected my D-Link to GE3 the LAN on VLAN20 went down, I could not ping Servers from PCs etc, all devices are connected to the unmanaged D-Links. Secondly the VLAN Assigment changed on GE3 and GE4 , VLANs 10 and 20 disappeared and only the default VLAN was assigned, also under VLAN Settings my VLAN interface state for VLAN20 shows Disabled. Also one of my access ports FE12 keeps changing VLAN.
Can anyone offer any suggestions as to what might have crashed the LAN and why my VLANs change. I did write my running config to the start up config by the way.
I added two screen shots.
I would seriously appreciate some help.
Thanks
Bob

Hi Garrett, thanks for your reply to my post, I hope you are well. I called Cisco support, they told me that they could not understand why this was happening and suggested a firmware upgrade, usually something I should have considered right from the beginning. This solved the issue for me.
Thanks
Bob

Issues with iMessage when switching data carrier (wifi - cellular)

So I have had this issue with my 5S and now my 6+ in iMessage. Not *always* but often enough I've run into issues sending messages via iMessage when I associate with wifi in that they don't send. I'll get an error message saying "not delivered" and it will stack as many outgoing messages I try to send. However, if I force the first message to send as text, subsequent messages will go through afterwards without issue. If I go from wifi to cellular I have no issues whatsoever and when I have these issues on wifi, my data works fine (incoming emails, Facebook notifications, etc.). I used to run cellular data only because I had unlimited but now I have a cap so I intend on using wifi when possible...but to have to send my first message as a text just so I can use iMessage is annoying...

Hi there BigDogg795,
I would recommend taking a look at the troubleshooting steps for iMessage found in the article below.
iOS: Troubleshooting Messages - Apple Support
To resolve issues with sending and receiving iMessages, follow these steps
Check iMessage system status for current service issues.
Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
Restart your device.
Tap Settings > General > Reset > Reset Network Settings on your iPhone.
If you still can't send or receive an iMessage, follow these steps
Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
Make sure that the contact you're trying to send a message to is registered with iMessage.
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
-Griff W.

Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

Hi,
I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
"Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
Blog: http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
Thank you,
Sri

Hi Sri,
To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
E2EDK01005                    0000047110815000000000001.........
E2EDKA1003                    0000047110815000000000002.........
E2EDKA1003                    0000047110815000000000003..........
E2EDKA1003                    0000047110815000000000004........
The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
Thanks
Harish

Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

I have them go to the correct site:
plugin download page on Interoperability Bridges.
My only options are:
1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
This only pertains to any student who has never had Firefox on their computer prior to 11.
Thanks in advance.

I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

Quality issues with new Mac Mini 09?

I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
Is there anyone who's not experiencing any problems?
Sounds like it may be a hardware issue with connections... the last thing I want.
My other choice is the 2008 Mac Pro which seems trouble free.
What do you think?
Thanks.

There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

Issue with new abap webdynpro INBOX EHP5

Hello Experts,
I'm currently working on the configuration of ESS/MSS services in EHP5. We are using different services like Appraisal OSA, Learning solution,etc. I already configured the Launchpad ESS, it's working fine but now I have an issue with the new Abap webdynpro INBOX. The employee and manager see their workitem notifications correctly in their respective inbox.(I'm calling application: IBO_WDA_INBOX that I integrated in my launchpad).
My problem is that when clicking on a workitem in order that it opens me the appraisal document (in edit or display mode), I got an error saying: "There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator."
I did some search on SAP help without any results. I'm wondering how should I register workflow tasks? I saw there is a table called IBO_C_WF_TAS (I added entries e.g:
IBO_WDA_INBOX TS99700031   EXECUTEAPPRAISALDOCUMENT).
I tried also to register all my custom tasks in transaction SWFVISU.
example:
TASK: TS99700013
Visualization Type: ABAP Webdynpro
APPLICATION:    HAP_MAIN_DOCUMENT
DYNPARAM   :    sap-wd-configId=HAP_AC_MAIN_DOC
NAMESPACE :    sap
SYSTEM_ALIAS: SAP_Webdynpro_XSS (I did create a system in sap portal under System Administration with as AS property /webdynpro/dispatcher )
Could you let me know what could be wrong, what I missed? Shall I create an iView, if yes which one? which properties?
I would really appreciate any help.
Thanks!

Hello Siddharth,
Thanks for you reply. Still the same issue. Following are the config I did till now:
In the PCD I created a new business object (SWF_WIOBN), an operation linked to the object (NAVIGATE).
I did create an iView (powl) in the custom folder, I integrated the operation within iView. I created a page that contains the iView.
In the properties of the iView I gave:
Application Name: HAP_MAIN_DOCUMENT.
Launch in New Window: "Display in separate Headerless Portal Window".
System: SAP_ECC_HumanResources
I added the required entries in tables:
IBO_C_WF_TTAS
IBO_C_WF_ACS
IBO_V_WF_TAC
IBO_V_WF_TTAC
etc...
I saw in the code of linked feeder class: CL_IBO_INBOX_FEEDER_WI that it's checking something called "Launch_Editor".. Is it a property that we can set somewhere?
Following are the parameters retrieved by system:
BO_NAME       = SWF_WIOBN
BO_OP_NAME = NAVIGATE
LAUNCHER_PARAMETERS -> empty.??
BO_RESOLVE_MODE = USER_SET_OF_ROLES
LAUNCH_EDITOR empty where must be set?
At the end I still get the error:
There is no iView available for system "": object "SWF_WIOBN". For more information, contact your administrator.
Any advice,
Thanks in advance

Wierd issue with new E3000 switch port

Similar Messages

Maybe you are looking for