Win7, BC 3.0.1 problems

When I try to install after partitioning I get a black screen that has a 1. and a 2. below it and below that a line that says, "Select CD-ROM Boot Type:_
The cursor is flashing but the keyboard is non-functional as is the wireless mouse. BC partitions correctly with a 32 GB partition.
I am trying to install Win7 Ultimate, 64 bit from a DVD

Your EFI firmware is 32-bit and you need to modify the DVD.
http://jowie.com/blog/post/2008/02/24/Select-CD-ROM-Boot-Type-prompt-while-tryin g-to-boot-from-Vista-x64-DVD-burnt-from-iso-file.aspx
http://forums.macrumors.com/archive/index.php/t-467704.html
There are other methods, but imgburn is one that requires Windows (VM like VirtualBox can get you by).

Similar Messages

Win7 black-screen-hanging-cursor problem on brand new rMBP

I am sorry but a face a problem similar to (surprisingly) many in this thread.
I have a brand new rMBP 15'' with bootcamp Win7 installed (90GB partition). Installation went painless ONLY with a fresh Yosemite 10.10.3 installation, otherwise I fell into said black screen-hanging cursor trap already during installation. After installation I could enter Windows and install some software there. Upon re-boot, black-screen-hanging cursor in top left problem.
Here is what sudo gpt -vv -r show /dev/disk0 says:
gpt show: /dev/disk0: mediasize=1000555581440; sectorsize=512; blocks=1954210120
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1954210119
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1772843400      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1773253040     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1774522576        1840
1774524416   179685376      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1954209792         295
1954210087          32         Sec GPT table
1954210119           1         Sec GPT header
And here for sudo fdisk /dev/disk0:
Disk: /dev/disk0    geometry: 121643/255/63 [1954210120 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 1772843400] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1773253040 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1774524416 - 179685376] HPFS/QNX/AUX
Any help greatly appreciated

If you built a USB using BCA and Windows ISO/DVD, it will show Windows and EFI boot both as options, when Alt Key is held.
W7 USB has the following structure .
W8+ USB has the following structure.
Does the behavior change if you
a. Resetting the System Management Controller (SMC) on your Mac - Apple Support
b. How to Reset NVRAM on your Mac - Apple Support

Audition 3.0 installer under Win7 64-bit fails with "problem while extracting files"

I'm having trouble installing Audition 3.0 on Windows 7 64-bit.
I downloaded an installer for Audition 3.0 (called ADBEAudition_WWEFGJIS.exe, 352 MB).
This installer runs but when the progress bar is at the far end, it raises a dialog saying "A problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
At this time, the main installer dialog shows 100% completed and displays the filename "...\Audition 3.0\Adobe Bridge CS3\redist\WindowsXP-KB898715-x64-enu.exe". I don't know whether this filename is related to the problem, it might just be the last file extracted.
I'm running Windows 7 64-bit on an Asus laptop with 4GB of RAM and an AMD Turion II P520 processor. I don't know whether this CPU is "SSE2-enabled" or not, as specified in the minimum system requirements.
I've rebooted the machine and the problem occurs consistently.
Thanks in advance for any suggestions.
KrisBlueNZ

Hey, I used to have a Diamond PCI card somewhere.
I would say that all bets are off with the drivers, but there is a strong possibility that you could be hearing the problems with the sample rate converter in Windows 7 (and I think in Vista). This affects recording and playback, and the first line of defence is to make sure that the source audio's sample rate is the same as the "default sample rate" that is set in every area in the Windows Control panel audio area.
The sample rate converter built into XP has a range of settings that are usually set to "high quality", and sample rate conversion is rare anyway with that OS. With Windows 7, the concept of the newer Windows mixer irequires that the sample rate converter changes all the audio on the fly to the default ample rate, but the converter is not very good. This doesn't always affect the audio - anything using DirectX seems OK, but anything using "WaveOut" audio (eg YouTube playback) is affected.
Microsoft acknowledges the problem and have issued a patch at http://support.microsoft.com/kb/2653312

Win7 and Reader X printing problem

Tried printing a PDF file from a browser window (via Reader X) and it would not print to my primary printer (HP Deskjet 5550 connected to a NAS USB port so it has a network address). Saving the file and printing from Reader X as a standalone app didn't help.
Other applications printed fine, and I could print from Reader X (standalone or in a browser) to a wireless Epson Workforce 610, except it was out of black ink so that wasn't a viable option.
It took forever to bring up the dialog box, and after selecting print nothing happened. The print queue never showed anything and no error message was presented.

Hi
We have the same problem with Read X !
We have 2no network HP designjet 1055cm A0 large format inkjet printers with driver v4.67 on XP windows software pc's
and when we do a print preview, the settings are fixed on A4 and you cannot change them at all. We are always printing with A1 and A0 PDF's .
We also have a canon irc2880i A4/A3 network laser printer, but that works with no problem.
I have now unstalled reader X and reinstalled back again 9.4 reader and it is all working again with the designjets !
Wake up Adobe on this problem, you have badly let us down on this !

W520+Win7-64, Standby Mode: MessageBox Problems ejecting...

Hello world,
I'm using a SSD in the internal harddisk slot and the original harddisk running in an ultrabay adapter. Windows is installed on the SSD. Each time I go into standby-mode and return, I see the message box "Problems eject XXXX, the device is currently in use...."
In the eventlog there are multiple messages saying
"The application \Device\HarddiskVolume2\Prog\xxxl.exe with process id 4796 stopped the removal or ejection for the device IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0."
followed by a
"Device action request for device 'IDE\DiskST9500420AS_____________________________0003LVM1\4&8a9acb7&0&0.1.0' was vetoed by 'STORAGE\Volume\{2483acec-a2e3-11e0-9cfe-fe3c617a851b}#0000000000100000' with veto type 6."
Has anybode an idea how to get rid of this messages?
TIA,
Bernd

I think I have a related issue. I have a SSD with my old drive in the ultrabay also
On wake up, the kb lights flash, the mechanical hd starts to spin, and then nothing. After a couple of seconds
the process repeats. It seems like something is timing out or there is some kind of power problem because the
NVIDIA GPU is being used. I don't see a message because I have to reset by pulling power and battery.
Wakeup is fine when in the Optimus mode.
W520 4270-CTO | 2720QM | 16 GB RAM | Quadro 1000M | BIOS 1.34 | PwrMgr 3.66 | 256 SSD

Win7 certification for 11i EBS - *Problems with JInitiator*

Gurus,
I've been trying to certify our 11i EBS on Win7. Web-based Jdeveloper pages load just fine. When trying to open OA Oracle Forms, the browser attempts to download JInitiator and then hangs. I have not successfully been able to install Jinitiator on Win7.
I opend up an Oracle TAR (SR) with the following response provided below. Has anyone had any success with JInitiator on Win7. If our users have to manually download JRE, this could become a huge headache.
Any help would be greatly appreciated.
Thanks,
Scott
=== ODM Action Plan ===
Window 7 is cerified with following pre-req
# Oracle Applications patch 10 (11.5.10) plus Maintenance Pack 11.5.10 CU2 or later
# Oracle Applications Technology 11i.ATG_PF.H Rollup 6 (RUP 6) (patch 5903765) or later.
# Oracle Developer 6i patchset 19 (6.0.8.28.x) (Note 125767.1).
# MLR Patch 8888184
# Java client plug-in JRE 1.6.0_03 or later
Windows 7 desktop clients are certified only with the native Sun Java Runtime Engine (JRE) with Windows 7. Oracle JInitiator was built on top of Java 1.3. Java 1.3 is desupported by Sun Microsystems and and not compatible with either Windows Vista or Windows 7. We have no plans to certify Oracle JInitiator with Windows
Internet Explorer 8
Oracle E-Business Suite 11i Prerequisites
Oracle Applications patch 10 (11.5.10) plus Maintenance Pack 11.5.10 CU2 or later
Oracle Applications Technology 11i.ATG_PF.H Rollup 6 (RUP 6) (patch 5903765) or later.
Oracle Developer 6i patchset 19 (6.0.8.28.x) (Note 125767.1).
MLR Patch 8888184
Java client plug-in JRE 1.6.0_03 or later

Hi Scott,
If you dont want to install jinitiator or JRE manually and they are not getting downloaded on cleint machine ,what you can dop is If your clients are on domain network then you can deploy JRE in domain group policy and JRE will get installed automatically(through group policy) when the Client machines reboots.
Regards

Error 306 on win7 wired network, but no problem on laptop on same network, wirelessly

iTunes on a wired network is not working correctly. Internet connection in all other areas is working. When running iTunes, update notification works, downloads updated version, but I keep getting the error 306 message when trying to update apps.
The icons are all blank or have blue question marks.
On the same network, just wirelessly, my laptops iTunes works perfectly.
TCP/IP settings are identical on both.

Windows is absolutely passing the buck, and what is more, they are doing it in hopes that we will pass them more bucks- Windows 7 offered a program (for free) that was called windows media center. Windows 8 does not have this however, they will suggest
that it you pay an additional $99.99 to upgrade to windows pro and THEN another $9.99 for windows media center, all will be fine in the media sharing department....
UNTRUE-
I have Windows 8 and fresh out of the box, I got an app called XBox Smartglass with my new (and supposedly improved) OS, Windows 8. Therefore, it is an OS issue, not a manufacturing issue or an Xbox issue or where ever else you may want to stream your
media to.
However, for whatever reason, I have been able to share media without upgrading or paying anything with not one, but two Xbox's...It has something to do with permissions, sharing, devices, networks...but don't ask me what, I truly, truly wish I could help
everyone...however, I just do not want windows weaseling more money out of already high paying customers.
Sometimes I right click on a pie of media and I receive a 'Play To' option. Sometimes that options offers me to 'Play To' 'The Dark Box' or 'Xbox 360' or one but not the other or; my personal favorite- the 'Play To' option is gone and the only option
is to 'Open With' the various media outlets on my PC but not stream it anywhere...and there is no rhyme or reason or setting that makes this consistent.
I wish I could help more, but I leave you with this- It is possible, It does have to do with Windows OS, and you do not have to pass anymore bucks their way to make it happen...

64 bit Win7 - T410 - USB hard disk problem

I have a T410. i5, 4gb, intel chipset.
Windows 7, 64 bit, english, with localization.
If I attach an external usb hard drive, it gets a drive letter, but I cant browse it.
4 usb hdd-s. there is sata, and pata, and there is 2,5, and 3,5 with own power.
I tried bios set to default, after that 2 of 4 disks worked for about 5 minutes.
The usb drives works perfectly in all other computers.
What shall I do???

Hi and welcome to the forum!
Are other computers also using Windows 7 64 bit version? Do you know the partition file system these drives are using? Same thing happens on my Win based PCs when I attach Mac partitioned Journaled drive to them.
Check these two thread:-
http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/005fc2fd-8f55-4a8a-946d-20a349b...
http://social.technet.microsoft.com/Forums/en/w7itprohardware/thread/c74b7b51-697f-4a73-a9f8-acc2a5d...
Further, make sure all drivers from lenovo and updates from Microsoft are installed.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

My Adobe XI only shows gray pages when I try to scan to my drive from an Epson WF-3540. The file shows it is a multiple kb pdf file. To read it I have to e-mail it to myself and let online mail reader open it. Can scan jpg and tiff with no problem.

Is there a compatibility issue with Adobe Reader XI 11.0.10 and the pdf scan program fro an Epson WF-3540 All In One? Is it an Epson Problem? Is it because the "source" shown in Properties from an Epson is a PDF 5.xx file? I can't understand why I can e-mail the item and get it to appear in the online Adobe reader, but if I try to save it to my computer drives it comes out with blank (gray) pages again. Is it a Win7 problem? Help I have a lot of scanning to do and only know everything was fine until about ten days to two weeks ago. Don't know if an update for Epson, Win7, or Adobe might be problem.

Thank you very much.! Two weeks of very frustrating uninstalls, reinstalls, cursing, moaning and thinking about buying a new scanner all solved with the check in the box. I have no idea how it got unchecked, as I never mess around with things that work. Incidentally, I got a "Fraud Detection Alert" on ~grafitti's message. When I went to the Adobe page and read the answer, I could not find the "Correct" button anywhere. Please see that ~grafitti gets some more points.
Again, Thank You!
Don B
A truly happy person is one who can enjoy the scenery on a detour.

Iphone 3g problems with itunes

I have finally installed the latest itunes version on my notebook (WIN7) - had a lot of problems with the avfoundationcf.dll - error.
But after many times deleting und installing itunes again and again, I finally made.
ITunes works - BUT
now it says: iphone cannot be used as the needed software is not installed - system is asking to delete ITunes again and install the needed 64bit ITunes.
But that ´s the one I have installed.
Any suggestions?

I also odid the upgrade I lost everything app my itunes what kind of mess is this aplle has to do something about this I still have my pic and contacts but everything else is gone. What do we do now?

Brand-new iPod Touch 5th gen often freezes win7 while charging

Hi,
I've had a new iPod touch 5th gen for about two weeks now.
I also have a laptop that runs Win7, that has had no problems whatsoever until now, and that has no problems when the iPod isn't plugged in.
Here's what happens:
I plug in the iPod Touch to update files and recharge the battery
All goes well, iTunes sees iPod, battery's charging
Lalala
Bam! Some 15-30min later:
Laptop freezes over.
I have had to manually shut down the laptop more than a dozen times in a couple weeks now.
The iPod is killing the laptop dead. Slowly, but surely, it's happening.
I love my laptop. I NEED my laptop. I otherwise love the iPod too
This happens whether the iPod is ejected, but still charging, or not; whether iTunes is on or not
I unplug the iPod: nothing; laptop still dead.
Sometimes, it happens when I change songs, as I simultaneously listen to the iPod while it charges.
Other times, it happens while fiddling with playlists and tag infos in iTunes. (<-- I am particularly weary of this one, since, it seems to me, the iPod takes a few good seconds to access tag infos/change songs, much longer than, for instance, did my iPod Nano 5th gen, though, understandably, that one did not have an OS)
Other times, it just happens suddenly, with no apparent cause other than that the iPod is plugged in.
Could it be the cable? (any way to find that out without investing in a new cable? )
The iPod runs iOS 6.1.3; the laptop runs iTunes 11.0.5.5.
The laptop is equipped with a fairly new SSD, no HDD [does that matter?!]
Any help/ideas to get these two to get along would be greatly appreciated !! Thanks.

If yo mean the iPod freeze and does some things when charging. other users have experienced that problem. However. I have not seen a reply concerning the resolution.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Installing and then uninstalling iTunes has slowed Win7 PC

I installed iTunes on my newish Win7 PC but had a problem with the PC being 'not authorized'. Despite many many hours of reading Apple help and Googling I could not resolve the issue. Decided to give up on iTunes and stay with Windows Media Player. Uninstalled iTunes and now my PC is running slower than before the iTunes install/uninstall.
Apple, I am not happy that your software has messed up my PC.

Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

X200 hotkey driver on Win7

Hello, i upgrade system to Win7 and i have a problem with hotkey driver. It can't install driver and write - "cann't copy file to destination directory". This problem only "on screen display" driver.
I hope that i explain correctly.
I am from Russia and have bad english, please write your answer simply.
Great thanks.

slickm wrote:
Hello, i upgrade system to Win7 and i have a problem with hotkey driver. It can't install driver and write - "cann't copy file to destination directory". This problem only "on screen display" driver.
I hope that i explain correctly.
I am from Russia and have bad english, please write your answer simply.
Great thanks.
1) Make sure you are using the computer as an administrator
2) Uninstall hotkey driver and reboot
3) Download ccleaner, run the program and clean the registry and fix any error
4) Download latest hotkey directly from lenovo and install

Remote problem

hi everyone!
the last 3 days i spent figuring out, how to get my iphone back on my desktop's itunes library, i hope, someone can help me
my whole story:
everything worked perfect. after updating to os3 i had these strange wifi-problems. i brought it back, and after 4 weeks i got a new one back. everything seemed perfect again, but then i then i tried to start connecting via remote, but my iphone just shows up on my laptop.
because this was the only reason to change my iphone, i seriously tried everything, to make it work again. so i checked firewall settings, router settings, re-installed itunes, and then the whole computer.
now in win7 i had the same problem, so i again checked a lot of preferences, but did not suceed.
i am using a thomson cable router, getting my ip adresses automatically and have ssid/wpa2 running.
however, i hope someone can help me getting my phone back to my standard desktop.
thanks in advance
andrew

Hi everyone !
Have the same problem since I updated iTunes to version 9 (and sup.) and iPhone OS to version 3 (and sup.).
I can enter the code on iTunes, then after telling me I can remote control my iTunes from my iPhone, I cannot connect and allways have the same message "can't find the library".
What I've already done :
- completely reinstall my computer
- deactivate Windows firewall and Base Filtering Engine, then restart it
- deactivate my router firewall
- deactivate any filter on my router, then reboot it
- delete Remote from my iPhone, reboot it, then reinstall Remote, and reboot again
- activate library share on iTunes
- activate public folders share on Windows
- remove sim card to be sure to use wifi, and only wifi
- enter the 4 digits code on iTunes (worked)
- still the same message on iPhone : can't find the library
I've seen many posts saying that the computer needs to been wifi connected, and not via Ethernet. Is it true ??? It perfectly worked with older versions of these programs, why would Apple have made a change like this ??
Anyone with an idea ???

HP Touch Smart problems

Hi first post so go easy....
Left work after 20 years and managed to include a Touch Smart PC in my deal. Everything was fine when i was using it at work but recently it has been freezing up, not booting up, all sorts of issues.
So, firstly can anyone tell me how to find out what model i've got
Also how do i find out if i need firmware uogrades
It was on Vista Home Pro so i thought that might be causing it,
i then loaded Win7 but it still has problems
Thanks
Rich

Hi there, Did you get any luck with the model number.
What series was it 5,6,7,8,900, desktop or notebook.
Getting into the bios, F10 at HP boot screen will show you info too.
that is if things are working enough to do so..
Hv.
I never knew who HP were until my workshop got filled with faulty equipment. !! I know who Apple are now too.

Win7, BC 3.0.1 problems

Similar Messages

Maybe you are looking for