Wireless contection working but connection on main computer not working

I was using my main computer last night and walked away from it for about 15 minutes.  When I came back it said there wasn't a connection to the internet and couldn't find one.  I restarted the router and computer but it did not help.  The connection does however work on my internet.  Any suggestions?

mrsjolivas wrote:
Right now I can't download anything from the internet since my connection isn't working.
You said wireless is working, right? Use that, if it is on a different computer download it there, put it on a flash drive, install on the one that won't communicate. But first...
Lets go back to basics.
On the "main" (wired?) computer, can you communicate from the PC to the router? Open your browser, type in 192.168.1.1 in the address bar and hit enter.
Do you see the router login screen? If so, you are talking to the router, and the problem is inside the router or beyond it (which is unlikely since you said the wireless works).
No? Then you aren't even talking to the router, try a Network Connection repair on the PC and see if that fixes it. And check to make sure the ethernet cable between your computer and the router is still correctly plugged in, and try moving it to a different port on the router.
Hope this helps. If not, please tell us more about your entire configuration (PCs, other things like TV STBs, brand of router, any customization you may have done on the router, etc). It is hard for anyone to help in an information vacuum.
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248

Similar Messages

  • I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

    it is a windows 8

  • Photosmart C4780 says wireless is on but computers say printer is not connected

    My Photosmart C4780 has always been temperamental with its wireless network connection; I have had the printer replaced once already and with both machines spent several days worth of hours on the phone to HP Helpdesks trying to uninstall and reinstall the drivers and additional software for various issues - either printer or scanner not working.
    Now the problem is that although the thing itself says that the wireless connection is on and working fine; none of the computers on my home network (Two PCs running Windows 7 32-bit; and two Macs running OS X Lion) are able to connect to the printer; no matter what I try it keeps saying the printer is offline.
    I would happily throw the thing in the rubbish bin to stop wasting any more time on it; but I have just bought 5 new (original HP  XL) cartridges for it and would hate to waste those.
    In fact the problems started when I replaced the cartridges; the alignment page at first refused to scan and when it did, it came up with an error message which unfortunately I can no longer remember exactly; something about the thing not being properly aligned and this may affect print quality.  I am assuming that this is what caused the problems; although why this would cause the computers on the network to say that the printer is offline I have no idea.  It has printed scanned images since then which came out fine; so the print quality can't have been that badly affected.
    Anyway, the thing is too old now to be able to call the HP helpdesk again (all of about two years old!) so I really don't know what else to do - apart from binning it and trying to get a refund on the three unused cartridges.  Oh, and buying a different make printer, obviously!  
    I have previously had a Photosmart 7350 which worked beautifully for many years, until I upgraded the computer to Vista and HP could not be bothered to provide updated drivers for it. The print quality of this one was what made me decide to go for HP again - a decision I seriously regret now!
    Does anyone have any ideas of how to get the thing working again; at least until I have time to properly research an alternative?
    Thank you 

    SafeTouch wrote:
    Thank you PrintDoc.  I'm afraid I don't completely understand your instructions.  I found the page you said to set a manual IP address, but then I got stuck:
    When you say: "You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250" what exactly do you mean?   All boxes on this page are completely blank; so what address should I put here?  Put the same address as the printer currently has, only substitute another number (like 250) for the number after the last '.' in the printer's current IP address.
    And when you say: "Enter your router's IP (on the Network Config Page) for the gateway." are you talking about the IP address that is printed in the confuguration summary underneath 'network name (SSID)' and 'hardware address (MAC)' as 'IP address'?  Or would this be the address to put in above?  The gateway address will be the same as the printer's, but will end in .1
    Thank you for your help so far; please clarify this.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Wireless Keyboard and Mouse connection lost when computer wakes up

    Every time my computer wakes up I get the message "Connection Lost" referring to the mouse (Mighty Mouse) and keyboard. I have to wait a couple of seconds for them to start working. I tried to remove them from the list of Bluetooth devices and then pair them again, but had no success. It's pretty annoying to have this happening everytime the computer wakes up.
    Is anybody else experiencing this? Any suggestions?
    Thanks.
    richard

    I have this issue as well, and havn't found a sufficient answer on the forums as of yet.
    I can pair my mouse every day, and it will work fine, until I leave it at night when my computer shuts down. When I return in the morning I have no mouse, and have to go back to the bluetooth setup wizard and re-pair the mouse by turning it off then on again. I can't even just come in and turn the mouse off and on and have it work. I have to actually go through the setup wizard.
    I CAN however, go to the bluetooth preferences, click on the mouse, and choose "connect" when it is turned off, then turn it on and it will connect without having to re-pair, but this is just as tedious and annoying as the whole setup process.
    It's so annoying to have to have a wired mouse plugged in just so I can pair my wireless mouse every morning. Kind of defeats the purpose of a wireless mouse.
    When I orginally bought the mouse and keyboard I had to return the original mouse because it wouldn't hold a connection even when I was using it. Obviously these wireless mice of Apple's need some more TLC in the engineering dept.

  • HT5704 Dont have wireless avail so I connected to my computer, how do I download this?

    Keep getting messages on my iphone to get "support.apple.com/kb/HT1222" but down know how to download it to my phone as I dont
    have "wireless" near me.  How do I download updates then?

    With your phone connected to iTunes, click "Update" on the summary page of your device.
    iOS: How to update your iPhone, iPad, or iPod touch
    Message was edited by: modular747

  • Connect a Client Computer Not Working At All

    I have a new Windows 7 clean install with updates that is not able to connect to SBS 2011 at all.
    In the past (about 2 years ago) I ran into the same problem and by following the simple steps outlined here - http://blog.ronnypot.nl/?p=594 - it worked no problem. Now it does not help at all.
    For a test, I took a spare machine and did a clean install of SBS 2011, applied the updates (except NET 4.5.1). When I tried to connect the new Windows 7 machine to the new SBS 2011 machine - this also has failed.

    Server's ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : BLAH-1
       Primary Dns Suffix  . . . . . . . : BLAH.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : Yes
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : BLAH.local
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . : BLAH.local
       Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
       Physical Address. . . . . . . . . : REMOVED
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
       Link-local IPv6 Address . . . . . : REMOVED (Preferred)
       Link-local IPv6 Address . . . . . : REMOVED (Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : REMOVED
                                           192.168.1.1
       DHCPv6 IAID . . . . . . . . . . . : REMOVED
       DHCPv6 Client DUID. . . . . . . . : REMOVED
       DNS Servers . . . . . . . . . . . : REMOVED
                                           192.168.1.12
       NetBIOS over Tcpip. . . . . . . . : Enabled
       Connection-specific DNS Suffix Search List :
                                           BLAH.local
    Tunnel adapter isatap.{REMOVED}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : BLAH.local
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Workstation's ipconifg /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : BLAH-1
       Primary Dns Suffix  . . . . . . . : BLAH.local
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : Yes
       WINS Proxy Enabled. . . . . . . . : No
       DNS Suffix Search List. . . . . . : BLAH.local
    Ethernet adapter Local Area Connection:
       Connection-specific DNS Suffix  . : aspa2.local
       Description . . . . . . . . . . . : Broadcom NetXtreme 57xx Gigabit Controller
       Physical Address. . . . . . . . . : REMOVED
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
       IPv6 Address. . . . . . . . . . . : REMOVED (Preferred)
       Link-local IPv6 Address . . . . . : REMOVED (Preferred)
       Link-local IPv6 Address . . . . . : REMOVED (Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.1.12(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : REMOVED
                                           192.168.1.1
       DHCPv6 IAID . . . . . . . . . . . : REMOVED
       DHCPv6 Client DUID. . . . . . . . : REMOVED
       DNS Servers . . . . . . . . . . . : REMOVED
                                           192.168.1.12
       NetBIOS over Tcpip. . . . . . . . : Enabled
       Connection-specific DNS Suffix Search List :
                                           BLAH.local
    Tunnel adapter isatap.{REMOVED}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : BLAH.local
       Description . . . . . . . . . . . : Microsoft ISATAP Adapter
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    HCI3 - I tried the steps you have listed and it did not work.

  • IChat 5.0.3 video connection problem one computer not another

    I have MacBook Pros about same age, both upgraded to SL, running 10.6.5 and side by side. Airport Extreme home wireless network. iChat bandwidth set to 500kbps on a Comcast cable internet. MBPro#1 can video/audio chat (one way) with PPC in the house and its Connection Doctor setting is "Router type: Full cone". MBPro#2 cannot connect for video/audio chat to MBPro#1 although the camera comes on and you can select "Accept" in the video window; however, the connection thingie just spins until failure. On that machine the Connection Doctor setting is "Router type: Unknown" with its message about something up with the network preventing video/audio chatting. Both machines have Sound input and Sound output settings identical. Text chatting is fine. Video chat attempt to the [email protected] also fails due to connection error. Other wireless activities, such as downloads, internet, etc. work fine on both machines.
    - I have reinstalled SL from the install DVD and then upgraded to current OS version from the 10.6.5 combo upgrade .dmg.
    - I have replaced the plist files with ichat in their names from MBPro #1
    - As far as I can see, settings are identical in all the System Preferences locations (including firewall), but the two machines differ of course in the iChat Connection Doctor readout. Applications on the two machines are not identical.
    Perhaps there are other files I need to find or change but I am at a loss to get MBPro #1 video chatting -- MBPro #2 in contrast was absolutely smooth to get going.
    I've looked through a number of the iChat Discussion topics but did not come across this particular situation of two machines, one working and one not with the same router -- forgive me if my search terms did not find them. Any help will be appreciated.
    Peter

    Hi Ralph
    Thanks for the reply.
    The Terminal command is certainly showing something significant. The log for the iChat AV incapable machine is pasted below per your instructions. The end of the paste is as far as it goes. I see that it is different from the iChat AV capable machine ie for that computer there are positive tests to BWD commands and checks for audio and video network come up positive, plus more data come after the CommNAT line.
    Peter
    MBP-Peetah2:~ prussell$ /Applications/iChat.app/Contents/MacOS/iChat -errorLogLevel 7
    201941.240150 ER_AddFilter (0): Adding [Peter [email protected]]->[0]
    201941.240175 setLocalUserName: Peter [email protected]
    201941.242083 Default video size is (640 x 480)
    201941.243170 H264: (640 x 480) @ 20 fps
    201941.245303 H264: (320 x 240) @ 30 fps
    201941.247430 H263: (352 x 288) @ 30 fps
    201941.248499 H263: (176 x 144) @ 30 fps
    201941.248606 ######################################
    201941.248614 # SoundDec_Create(16000 --> 3) #
    201941.248619 ######################################
    201941.260288 Leaving SoundDec_Create
    201941.263386 Audio Unit Parameter List = 7, result = 0
    201941.263409 CurrentFormatmSampleRate 44100.000000
    201941.263420 CurrentFormatmFormatID lpcm
    201941.263425 CurrentFormatmFormatFlags 0x00000029
    201941.263430 CurrentFormatmBytesPerPacket 4
    201941.263434 CurrentFormatmFramesPerPacket 1
    201941.263438 CurrentFormatmBytesPerFrame 4
    201941.263442 CurrentFormatmChannelsPerFrame 2
    201941.263446 CurrentFormatmBitsPerChannel 32
    201941.263450 OurFormatmSampleRate 16000.000000
    201941.263455 OurFormatmFormatID lpcm
    201941.263459 OurFormatmFormatFlags 0x00000029
    201941.263464 OurFormatmBytesPerPacket 4
    201941.263468 OurFormatmFramesPerPacket 1
    201941.263471 OurFormatmBytesPerFrame 4
    201941.263476 OurFormatmChannelsPerFrame 1
    201941.263480 OurFormatmBitsPerChannel 32
    201941.263490 Reached err = 4294956417, 459
    201941.263495 Reached err = 4294956417, 467
    201941.264973 ### NEW STATE: to: VC_INIT, from: VC_INVALID
    201941.265007 ### NEW STATE: to: VC_IDLE, from: VC_INIT
    201941.265023 ++++++++ confStatusMapRemoveAll
    201941.265029 ( ) -- mapUserIDToSecurityInfo cleared --
    201941.265311 dispatch_CommNATProc
    201941.272561 selectedCamera: no camera has been set yet.
    201941.272660 Selected microphone is the null device microphone.
    201941.272763 vcCapabilitiesOfCPU returns: 0x00000fff
    201941.272969 BWD: cache: '[3.1.0.10:0.255.255.255]' != '[2.1.0.10:0.255.255.255]'
    201941.273023 BWD: Launching thread to determine focus capability based on bandwidth.
    201941.273101 BWD: Using QuickTime value: 500000
    201941.273135 BWD bandwidth: 500 kbits up, 500 kbits down.
    201941.273142 videoNetworkCapable: 1 -- 3 max participants.
    201941.273147 audioNetworkCapable: 1 -- 9 max participants.
    201941.273215 Supports PCMU wideband for audio: 1 / video: 0
    201941.273233 vcCapabilitiesOfNetwork returns: 0x00000fff
    201941.273241 vcCapabilitiesOfRouter returns: 0x00000000
    201941.273295 vcCapabilities returns: 0x00000fff
    201941.273749 dispatch_DetermineFocusCapability
    201941.279880 Found 2 cameras:
    201941.280166 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    201941.280440 Built-in iSight - 0xfd40000005ac8502 (0x104, 0x104)
    201941.280461 selectedCamera: no camera has been set yet.
    201941.280487 selectCameraWithTundraDeviceID: 0x104 returned 1
    201941.285160 Microphone devices:
    201941.285360 Internal microphone
    201941.285473 Line In
    201941.285754 Selected mic: Built-in Microphone / imic
    201941.285853 Found 2 cameras:
    201941.285919 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    201941.286003 Built-in iSight - 0xfd40000005ac8502 (0x104, 0x104)
    201941.286083 selectedCamera2 GUID returned Built-in iSight
    201941.286145 selectCameraWithTundraDeviceID: 0x104 returned 1
    201941.290055 Microphone devices:
    201941.290154 Internal microphone
    201941.290218 Line In
    201941.290429 Selected mic: Built-in Microphone / imic
    201941.300452 Received VCHardwareCapsChangeNotification
    2011-01-01 20:19:41.300 iChat[357:903] Hardware Caps Dictionary: {
    HasCamera = 1;
    HasDV = 0;
    HasMic = 0;
    HasQ8 = 0;
    Q8List = (
    FirmwareVersion = 0;
    GUID = 0xfd40000005ac8502;
    IrisState = 1;
    201941.302126 Found 2 cameras:
    201941.302334 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    201941.302507 Built-in iSight - 0xfd40000005ac8502 (0x104, 0x104)
    201941.306851 Microphone devices:
    201941.307034 Internal microphone
    201941.307144 Line In
    201941.307339 selectedCamera2 GUID returned Built-in iSight
    201941.307496 Selected microphone is Internal microphone.
    201941.307553 vcCapabilitiesOfCPU returns: 0x00000fff
    201941.307655 BWD: cache: '[3.1.0.10:0.255.255.255]' != '[2.1.0.10:0.255.255.255]'
    201941.307669 BWD: Using QuickTime value: 500000
    201941.307683 BWD bandwidth: 500 kbits up, 500 kbits down.
    201941.307689 videoNetworkCapable: 1 -- 3 max participants.
    201941.307694 audioNetworkCapable: 1 -- 9 max participants.
    201941.307698 Supports PCMU wideband for audio: 1 / video: 0
    201941.307710 vcCapabilitiesOfNetwork returns: 0x00000fff
    201941.307717 vcCapabilitiesOfRouter returns: 0x00000000
    201941.307722 vcCapabilities returns: 0x00000fff
    201941.307792 Found 2 cameras:
    201941.307813 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    201941.307843 Built-in iSight - 0xfd40000005ac8502 (0x104, 0x104)
    201941.307870 selectedCamera2 GUID returned Built-in iSight
    201941.307885 selectCameraWithTundraDeviceID: 0x104 returned 1
    201941.312229 Microphone devices:
    201941.312334 Internal microphone
    201941.312399 Line In
    201941.312623 Selected mic: Built-in Microphone / imic
    201941.319687 Selected microphone is Internal microphone.
    201941.319922 Selected microphone is Internal microphone.
    201941.320105 Selected microphone is Internal microphone.
    201941.323061 Found 2 cameras:
    201941.323093 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    201941.323137 Built-in iSight - 0xfd40000005ac8502 (0x104, 0x104)
    201941.323169 selectedCamera2 GUID returned Built-in iSight
    201941.323186 selectCameraWithTundraDeviceID: 0x104 returned 1
    201941.329203 Microphone devices:
    201941.329390 Internal microphone
    201941.329501 Line In
    201941.329771 Selected mic: Built-in Microphone / imic
    201941.330352 Selected microphone is Internal microphone.
    201941.331296 Found 2 cameras:
    201941.331766 Apple Screen Input Device - 0-Apple ScreenInputDevice (0x101, 0x200)
    201941.331859 Built-in iSight - 0xfd40000005ac8502 (0x104, 0x104)
    201941.331956 selectedCamera2 GUID returned Built-in iSight
    201941.332020 selectCameraWithTundraDeviceID: 0x104 returned 1
    201941.336642 Microphone devices:
    201941.336893 Internal microphone
    201941.337048 Line In
    201941.337357 Selected mic: Built-in Microphone / imic
    201941.337868 Selected microphone is Internal microphone.
    201941.364180 BWD Configuration Data: snatmap.mac.com (16384/1)
    201941.364489 Connect to bwd server:16384/1 from configuration file.
    201941.365699 BWD_GetBandwidth: SendRequest (from :16386)
    201941.616127 BWD_GetBandwidth: SendRequest (from :16386)
    201941.866366 BWD_GetBandwidth: SendRequest (from :16386)
    201942.116735 BWD_GetBandwidth: SendRequest (from :16386)
    201942.367129 BWD_GetBandwidth: SendRequest (from :16386)
    201942.617493 BWD_GetBandwidth: SendRequest (from :16386)
    201942.867743 BWD_GetBandwidth: SendRequest (from :16386)
    201943.118093 BWD_GetBandwidth: SendRequest (from :16386)
    201943.368459 BWD_GetBandwidth: SendRequest (from :16386)
    201943.618783 BWD_GetBandwidth: SendRequest (from :16386)
    201943.869367 BWD_GetBandwidth: GotResponse
    201943.869436 BWD_Get: signal failed
    201943.869501 BWD GetBW failed.
    201943.869523 GotBandwidth: 0/0 (up/down) @
    201943.869599 BWD bandwidth: 0 kbits up, 0 kbits down.
    201943.869623 videoNetworkCapable: 0 -- 0 max participants.
    201943.869636 audioNetworkCapable: 0 -- 0 max participants.
    201943.869678 Focus Capability (after BWD):
    201943.869854 audioHardwareCapable = 1
    201943.869902 maxAudioParticipantsBasedOnHardware = 9
    201943.869917 audioNetworkCapable = 0
    201943.869928 maxAudioParticipants = 0
    201943.869940 canBeAudioMultipointParticipant = 1
    201943.869951 videoHardwareCapable = 1
    201943.869963 maxVideoParticipantsBasedOnHardware = 3
    201943.869974 videoNetworkCapable = 0
    201943.869985 maxVideoParticipants = 0
    201943.869996 canBeVideoMultipointParticipant = 1
    201943.870008 detectedUpstreamKbits = 0
    201943.870019 detectedDownstreamKbits = 0
    201943.870031 Sending VCCapabilitiesDidChangeNotification
    201943.870084 BWD: Launched thread done.
    201956.341569 CommNAT no result
    For the iChat AV capable machine there is:
    202525.

  • I have several email account setup on iphone.  for one of them can receive from/to emails from phone, but emails sent from computer not received on phone.  phone shows receiving but does not come thru

    I have iphone 4s with several email accounts set up.  For one of these accounts, and only one, test emails sent from phone come thru fine.  But computer generated mail doesn't come to phone.  For test messages phone shows "receiving" but nothing comes to inbox.  External sent mail does not  come to phone inbox, but does to outlook on computer.  Have checked settings and these seem correct.  What's up?  Four other accounts work fine.

    If you can send e-mail when on WiFi from home, but not when on 3G, that indicates your email provider is blocking e-mail being sent from outside their network. This is done to control Spam. ISPs who do this will usually have a separate SMTP server that should be used when using a mobile device. Check with them again.

  • WRT54GS wireless router can't connect to internet

    I'm now using an WRT160N wireless router, everything is ok, nothing happens
    i have an  WRT54GS (ver 6) wireless router that i have not used for 2 years.
    yesterday i took the WRT54GS out of the junk box, and replaced the WRT160N by the WRT54GS
    i have a desktop that is wired & a wireless lap top. my desktop does recognise the local network and my laptop does receive the signal but the my router can't connect to the internet.
    i did try everything:
    reset
    upgrade firmware
    but nothing worked
    can someone help. my ISP is comcast and this is my modem http://www.motorola.com/Consumers/US-EN/Consumer-Product-and-Services/Cable-Modems-and-Gateways/SURF...
    Solved!
    Go to Solution.

    Bypass the router and connect the main computer directly to the modem.
    Make sure that you can access the Internet on your main computer directly through the modem.
    Connect the modem to the Internet port and main computer to the Ethernet port on the router.
    Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it manually.
    Follow this link to configure the router with CABLE Internet service.

  • My time capsule still functions as a wireless base station but I am now unable to find my back-up disc. find

    My current time capsule 1T still works as a wireless base station to connect my remote computer to the internet yet I can't bring up my Time Capsule hard disc. I keep getting this message when I try to back up and I am unable to retrieve my backup disc storage. Is it possible for this unit to fail from the back-up disc standpoint yet the WL function continues to operate. This is the 2nd failure that I have had w/ a Time Capsule.
         Jim

    The TC hard disk can fail.. they become generally unreliable at 3years but many fail well before that. If you have applecare on any computer and TC less than 3years old, check if apple might not replace it .. again.
    I am not clear what the message is when the connection fails.
    Need more info.. exact error..
    Does the smart test show errors in the TC for the hard disk?
    What model and size hard disk is it exactly? The A model number from the base will help.
    Have you reset the TC or even just rebooted it and the network.
    Some apple updates are rather less than satisfactory and I have found my TM target disk offline for the first time yesterday.. for no good reason.. a simple reboot got it restarted and the Mac able to detect it again.

  • There are three apple iphone users in my household with one main computer.  How do I set up each iphone (and istore account) so that we don't corss sync contacts, calendars etc. also can i do this through icloud? so that

    There are three iphone users in my household but only one main computer. I am the primary users and have all my business contacts on my iphone and computerr.  The other two in the household also have iphones with their own contact lists.  is there a way to set them up so that we can share some music but not contacts.  Aosl need to be able to back up their data which I presume would be through icloud and a separate iapple itues id.  how do I go about setting this up?

    There is only one solution. Each user must have their own separate user account. All of their respective data would be contained in their separate user accounts. This also means each will have a separate iTunes Library. If you all use the same third-party apps, then each will have to purchase their own copies under their own Apple IDs. Some data sharing is possible. See:
    iTunes- How to open an alternate iTunes Library file or create a new one
    iTunes- How to share music and video
    iTunes- How to share music between different accounts on a single computer
    iTunes- Setting up Home Sharing on your computer

  • My main computer synced to android fine. I then added my laptop and my main computer synced to the laptop, losing all main computer data - why?

    Surely this sync is the wrong way round, so why/how did that happen?
    I have other lap tops to add, but I want them to sync to my main computer, NOT the other way round!
    I now need to restore my tabs from my Samsung Galaxy note 2. How can I do this?
    Thanks,
    Gary

    Did you delete the files and folder after sync?
    Firefox SYNC
    *https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you

  • My Telus wireless only works with WEP, but if I switch to WEP the wireless goes down on the other Windows computer being used in the same house.  Is there a way for both of us to get wireless internet or do one of us have to be connected by the ethernet?

    My Telus wireless only works with WEP, but if I switch to WEP, the wireless on the other computers in the house (which is Windows and WPA) stops working. My computer works with the ethernet cord but I want to be wireless too!  Do one of us have to sacrifice our wireless?

    For assistance in getting your MacBook to connect to a WEP-protected wireless network, please check out this Apple Support article: AirPort: Joining an encrypted WEP or WPA Wi-Fi network

  • Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    Any suggestions on how to get wifi to work?  I have a multitech router and can connect with a computer wirelessly but not the ipad.

    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398

  • T500 Ethernet Connection Not working, but wireless is working

    Hi
    In my laptop, when I try to connect to internet using the Ethernet card, it is not working.
    My laptop has the following configuration.
    T500; Windows Vista 64
    Ethernet card: Intel(R) 82567LM Gigabit Network Connection
    Following are what I observed.
    1. From command prompt, when I executed the command ipconfig, it is not listing the ethernet adapter connection.
    C:\Windows\system32>ipconfig /all
    Windows IP Configuration
       Host Name . . . . . . . . . . . . : Palasseri-Mana
       Primary Dns Suffix  . . . . . . . :
       Node Type . . . . . . . . . . . . : Hybrid
       IP Routing Enabled. . . . . . . . : No
       WINS Proxy Enabled. . . . . . . . : No
    Wireless LAN adapter Wireless Network Connection 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : My WiFi PAN
       Physical Address. . . . . . . . . : 00-21-6A-1A-24-B3
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter Wireless Network Connection 2:
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : WiFi STA
       Physical Address. . . . . . . . . : 00-21-6A-1A-24-B2
       DHCP Enabled. . . . . . . . . . . : Yes
       Autoconfiguration Enabled . . . . : Yes
       Link-local IPv6 Address . . . . . : fe80::42a:c2e2:cf9f:7b87%13(Preferred)
       IPv4 Address. . . . . . . . . . . : 192.168.0.12(Preferred)
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Lease Obtained. . . . . . . . . . : Sunday, February 21, 2010 6:12:15 PM
       Lease Expires . . . . . . . . . . : Sunday, February 28, 2010 6:12:14 PM
       Default Gateway . . . . . . . . . : 192.168.0.1
       DHCP Server . . . . . . . . . . . : 192.168.0.1
       DHCPv6 IAID . . . . . . . . . . . : 234889578
       DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-88-93-46-00-24-7E-13-AE-17
       DNS Servers . . . . . . . . . . . : 192.168.0.1
       NetBIOS over Tcpip. . . . . . . . : Enabled
    Tunnel adapter Local Area Connection* 6:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{7DB78E75-7547-408D-97D2-C347AF27F
    5F9}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 11:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : isatap.{5D3FE014-FD4D-40E1-AB3A-94B48F4A9
    392}
       Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    Tunnel adapter Local Area Connection* 14:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
       Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
       Physical Address. . . . . . . . . : 02-00-54-55-4E-01
       DHCP Enabled. . . . . . . . . . . : No
       Autoconfiguration Enabled . . . . : Yes
    2. Control Panel\Network and Internet\Network Connections : Under this, when I list all the connection, the Ethernet connection is showing it as Enable.
    3. When I unplug the network cable, at Control Panel\Network and Internet\Network Connections, I see the status as Cable Unplugged..
    4. I downloaded the latest driver and installed, but didnt change this behavior.
    How can I fix this ethernet issue. Any help is deeply appreciated.
    Thanks,
    NP

    palasseri wrote:
    Thank you for your reply.
    Yeah, it is listed under the Device Manager.
    I see one potential error under the event viewer. Thank you for that pointer.
    The IP address lease 192.168.0.11 for the Network Card with network address 00216A1A24B2 has been denied by the DHCP server 192.168.0.1 (The DHCP Server sent a DHCPNACK message).
    Any idea why this is coming???
    I get that exact same error when I change my MAC address and my computer is trying to connect to my router.
    This message is probably just the result of your computer not recognizing your Ethernet Adapter.
    I have never had this problem and am just shooting in the dark, but I would say you either have a bad Ethernet card, or your Adapter is not configured correctly.
    I keep wanting to go back to your adapter in the Device Manager.
    Is the Device Status "This Device is working Properly"?
    Under Power Management, is the "Allow the computer to turn off this device to save power" unchecked?
    Are you downloading the drivers from Lenovo's website?
    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70199
    Have your tried Uninstalling the adapter, and reboot.
    Your system may automatically reinstall the adapter.  If not, you can manually reinstall it.
    T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

Maybe you are looking for

  • Member ID checks in Script Logic

    I thought I saw a note recently that the 7.5MS version of BPC added a new feature to check that the Member IDs being written to in a *REC statement would be validate so that you would avoid the problem of invalid member id's in the cube. However, whe

  • Could not install J2SE v 1.4.2_04 SDK with NetBeans 3.6

    when trying to install, gives error: the wizard cannot continue because of the following error: could not load wizard specified in /wizard.inf (104)

  • Tie Regions by position change.

    As I understand the "Tie Regions by Length Change" is now named "Trim Region End to Next Region". OK. What about "Tie Regions by position change"? I've search for it and is not there.

  • Problem During Extraction

    Hello All, I tried enhancing the 0customer_Attr  datasource through user exit EXIT_SAPLRSAP_002. I had entered 4 fields and tried to fill the data to these fields by writing the abap code. But after in bw the values of the fields which i have entered

  • Pick and Pack check Fulfillment% not only by item but also by document

    when user set sales order set Allow Partial Delivery per Row = FALSE Allow Partial Delivery = FALSE when Pick and Pack check Fulfillment% set 100-100 i have a sales order which have multi-line . but line 2 item didn't have enough quantity.so this doc