WLSE Radio Scan Problems

I have recently set up WDS at a remote campus. I scheduled a radio scan for 4:00am so as not to interfere with active users. The scan completed but not successfully. I got an error message regarding the WDS and I can not determine the reason. I have attached the Job Log from the WLSE.
All the AP's are registered with the WDS AP. The WDS AP is dedicated with the radio turned off. The WDS is in an authenticated state with the WNM. I'm not sure what the problem could be.

This has been successfully resolved with the help of TAC. The issue is actually a bug in the ACS v3.3.3. The bug ID is CSCsb47726. Once I applied the patch (replacement of a specific dll) the WDS and ACS and WLSE completely authenticated to one another.

Similar Messages

Problem doing wlse radio scan

Hi,
Just did a radio scan of a building with 18 APs. It all went well but one AP was removed from the scan due to the following error.
ERROR: Measurement Request NAK received - removing interface 00-40-96-a1-0d-7c from AP Radio Scan participation
I've not had any luck finding and explanation for this error....where can I look it up?
....thx....J

Is your WDS properly linked to your WLSE. It should say : "Setting up registry keys" in the wireless services/wds in Wireless Network Manager Information.
I had the same problem also the WNM info then said authenticated. This is a confusing state. I then thought it was Ok....but it was not...
Good luck

WLSE AP Radio Scan Failure

I finally got the WLSE talking with all of my access points. The WLSE is able to discover all of the access points, so I believe that means that SNMP is working properly.
However, now I'm trying to perform an AP Radio Scan. When I do, I get this error message:
ERROR: AP not SNMP accessible - removing interface xx-xx-xx-xx-xx-xx from AP Radio Scan participation
ERROR: No APs are available to particpate - ending AP Scan.
I get this for all of the access points.
Why would this be happening?

Other possible causes:
- AP not SNMP Reachable from WLSE. To verify, use the SNMP Reachable Test in WLSE Administration screen. If the AP have multiple radio interfaces and if any one of them is down, then this will also cause problems while doing the scan.
- AP do not have the iso view tied to the RW community string.

HP 6500 AIO printer scanning problems.

I recently upgraded my Mac OSX software to Snow Leopard. Now the scanner part of my HP printer no longer works. I'VE SCANNED MANY TIMES PREVIOUSLY. I tried to scan today and got messages to the effect, no scanner options, scanner was not connected to the computer, scanner not found, no scanner selected; the scanner is not initialized...
I've done the following: tried to get help from HP- they said as long as my driver sw was up to date (which it is) i should contact Apple. I tried to add the scanner - didn't work; setup printer again - didn't work; setup profile for scanner - didn't work; read thru scanner help topics on apple support - didn't help. What's going on and how do i fix it?
thx.

It doesn't install a driver version 2.7. It does in fact install for your printer driver 3.1.1. In as much as you already have that driver installed there is some other reason why you are having issues. Contact HP to resolve the scanning problem.
There is third party scanning software which is much better than HP's. Check compatibily with VueScan.

Printing/Scanning Problem with HP All-In-One

As you will see, I am a bit confused as to how my Mac is talking to my HP all in one. I am having printing and scanning problems. When I try to print, nothing happens. I go to print status and the print job is there but the printer is not printing. I try pausing, deleting and trying to print again, hold to no avail. It recognizes the job, it just won't print.
Scanning is similar. Most of the time I end up with an error message "The scan cannot be performed because another program has control of the HP imaging device". It directs me to restart the program, close all programs, re-boot the computer. I have done all of these and no go. In addition, no other programs are running at the time.
As far as my computer recognizing the HP, it does in both wifi and bluetooth. I have made it my default printer.
I have a time capsule as a router and everything is set up properly for it. Four bars are shown indicating it is acting properly. Both it and bluetooth are turned on. The HP status lights are on for both wifi and bluetooth.
I have checked with HP and Apple Support and could not find anything that addresses my issue. Please help!!
Thanks

I had a similar problem awhile back with my HP F2210 all-in-one. I basically re-downloaded all of the software for the printer from HPs site. Before re-installing, I did a safe boot. Then, I reinstalled and restarted and all was well. When software update told me there was a new driver available, I installed it and things still worked. I'm able to print, scan, and all the printer is supposed to do without a hitch.

Scanning problem with HP Photosmart C6180

Since the upgrade to 10.6 my HP C6180 multifunction printer is not working as a scanner from Adobe Acrobat Pro 9
I select from the acrobat menu:
File
CreatePDF
From Scanner
in the "acrobat scan" window Scanner: shows "Please select a device" but there is nothing in the drop down list!
This means that i can not scan a document to PDF from within Adobe Acrobat pro. I can scan through preview but preview does not provide the same features that Acrobat Pro does.
Any Ideas? I have re-installed the adobe software but no joy...

Had scanning problem after uploading Snow Leopard -
This will fix your problem!
Scanning with the software included in Mac OS X 10.6
New with Snow Leopard, the Scanning interface to these HP Inkjet All-in-One devices is now built into Snow Leopard and supported with the Apple Image Capture application. There are three ways to perform scanning from your HP All-in-One:
Preview program
Image Capture program
System Preferences > Print & Fax
Important: After you open the scan interface, it is important to select the correct mode ( Flatbed or Document Feeder ) for the source of the scan image. Your HP All-in-One may have an Automatic Document Feeder (ADF) or a flatbed lid. By default, Document Feeder will be the automatically selected Mode for any devices that have an ADF. You must select Flatbed if you want to scan directly from the glass flatbed and not the Document Feeder.
For more information about Scanning and Image Capture, open the Help menu from Mac OS X 10.6 and type in your question.
Method one: Scan from the Preview application
Click the Apple Preview icon in the dock to open the Preview application.
From the Preview File pull-down menu, choose Import from Scanner .
Choose the HP Photosmart, Officejet, or Deskjet All-in-One.
The scan interface opens. Click Show Details to view settings and options.
Method two: Scan from the Image Capture application
In the Applications folder, select and open Image Capture .
In the list of devices on the left, click your HP All-in-One.
Networked devices appear in the Shared list.
The scan interface opens. Click Show Details to view settings and options.
Method three: Scan from Print & Fax > Printer browser
From the Apple menu, choose System Preferences .
Click Print & Fax .
In the list of printers on the left side of the dialog, select the HP All-in-One to view the options in the Print & Fax window.
Click the Scan tab, and then click Open Scanner .
The Printer Browser window appears.
Click the Scan icon at top right of the toolbar to launch scanning.
The scan interface opens. Click Show Details to view settings and options.
Important Gotcha: If the Scan or Print icons do not appear in the Printer Browser window toolbar, you need to delete the current HP printer queue and add a new one, as follows:
Close the Printer Browser window to return to the Print & Fax preference pane. Or, go directly to the System Preferences > Print & Fax pane.
Select your HP printer in the list on the left.
Click the - sign at the bottom of the list to delete the product from the list.
Click the + sign at the bottom of the list to add the product back to the list.
Select your HP printer, and then click Add to create a new print queue.
The next time you open the Printer Browser window, the Print and Scan icons should appear in the toolbar, providing access to Image Capture.

Adobe Acrobat 8 Scanning Problem with Brother 7820N

I am all of a sudden having a scanning problem utilizing Adobe Acrobat and my Brother 7820N printer/scanner. It was working just fine scanning into PDF format in Adobe when I was on the Tiger OS. I just upgraded to Leopard about a month ago and now my scanner is not working, I can print to it no problem, but when I try to initiate a scan through Adobe it crashes and I get the following error message: "the application acrobat quit unexpectedly".
Can anyone provide me with any advice on how to fix this problem?
Thank you.

You need program for scanner to encode texts, not adobe
h
e
l
l
o

Scanning Problems with Brother 7820N

I am all of a sudden having a scanning problem utilizing Adobe Acrobat and my Brother 7820N printer/scanner. It was working just fine scanning into PDF format in Adobe when I was on the Tiger OS. I just upgraded to Leopard about a month ago and now my scanner is not working, I can print to it no problem, but when I try to initiate a scan through Adobe it crashes and I get the following error message: "the application acrobat quit unexpectedly".
Can anyone provide me with any advice on how to fix this problem?
Thank you.

Hello,
I think you answered the question yourself. You upgraded from Tiger to Leopard and now the scanner isn't working as it should.
You need to update the Brother drivers. Go to their web site, download and install the software, run Disk Utility and Repair Disk Permissions. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
Since you are trying to scan into Adobe software, there might be a TWAIN driver necessary to update.
Carolyn

I need help w/ HP Office Jet 4500 scanning problems

Mine is IMAC w/OSX 10.9.1 w/HP Officejet4500. I downloaded the MAC software for scanning problems. I can now scan but the scanner won't allow a file to be saved. Even after downloading and re-installing several times, rebootong the IMAC, I still receive the Error msg: file 'save to' 'read only'. I've checked the files and all the files are read/write. Any suggestions? Thanks, Amy

http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967500 and

I am attempting to listen to iheart radio. Problem is, there is too much buffering going on. How do I correct this issue?

I am attempting to listen to iheart radio. Problem is, there is too much buffering going on. How do I correct this issue?

Robert, did you have an iPhone 4 or 4s?
And did that iPhone 4 buffer just like the iPhone 5?
And that is my frustration, I am testing these 2 iPhones next to each other, a 4 and a 5, the 4 plays, the 5 buffers!
Noooo sir, there is nothing wrong with your phone... Am I going crazy or what?
I wonder if somebody from Apple reads these posts...
There must be a solution for this but Nobody seems to know what it is and not a word from the Geniuses this time.
I am getting a 5s today, I wonder if that solves the problem...

HP6280 Scanning Problem

My HP C6280 developed a scanning problem today. I can still scan but everything goes to HP Photostart 3.5. I no longer can designate where I want to scans to go and what name to give them. I do not want to use HP Photostart 3.5. I also cannot open my desk top pictures now. I get a "Attempt to Access Invalid Address." The pictures used to open automatically with Photoshop. Now I have to hunt for a program to open the pictures. Also I get "HP Cue--scanning flow component has stopped working. I use Windows 7 and have made no changes to my computer. Any help will be greatly appreciated.

Hi @dgn4,
Welcome to the HP Forums!
I noticed that you are having a scanning issue with your HP Photosmart c6280 on Windows 7. I am sorry to hear this, but happy to look into this for you!
I would recommend using our HP Print and Scan Doctor, sometimes this program can fix issues automatically for you!
I would also recommend this how to scan guide, How to Scan: Windows 7, as it has alternate methods of scanning as well.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Kodak 5252 scanning problems

does anybody have scanning problems after upgrading to Lion? My kodak all in one 5250 refuses to scan. Wifi is on, printing is working, it's just the scanning function that has given up. Any suggestions would be more then welcome. Chatted with kodak support but they are useless... I have the latest driver 6.2 but still does not work...

Thank you so much. I did as you said and checked out the drivers. Then it dawned on me that i could try my husbands imac running on Leopard. That one did scan. So I then compared the difference in the printer folder and it turned out that I had some extra plugins in my folder that were not present in the other desktop. They are called PrinterOptionsCombo plugin and USBClassDriver.plugin. I took those two out and bingo, it works. I wished though they had talked me through this at Kodak. I had a feeling that the guy in the chat did not really knew what he was talking about... Anyway, problem solved. Don't know how long it would have taken me to figure this out if I did not have had a second working computer in the house... ;o)))

HP LaserJet Pro CM1415fnw color MFP printing & scanning problems

Ever since I purchased this multifunction color printer, it has been unreliable. My Mac Mini running the latest OS (currently Mavericks OX 10.9.2) will be printing and scanning fine, and then at some point it can't find the scanner, the printing slows to an amazing crawl, and then the printing stops altogether. I have repeatedly attempted to set up the printer under Preferences and have installed the latest drivers from the HP website. When that works, it's a short-term fix; eventually, the bugs come back. The darn thing won't scan or print again, and I'm pretty fed up. I paid a premium price for a premium color multifunction printer for my home, and it has been nothing but a problem. Help!

Hello StoopBoy,
Welcome to the HP Support Forums.
I see that you have an HP LaserJet Pro CM1415fnw color MFP being operated on a Mac 10.9.2. The CM1415fnw will not maintain a continual connection to the computer displaying errors and very slow printing. Since you have done a great job already troubleshooting the issue some of the steps I suggest will have already been done by yourself.
I suggest you take these steps to help resolve the issue:
1. Reset the Printing Systems by following this Apple Document: Mac OS X: How to reset the printing system.
2. Uninstall the HP LaserJet Pro CM1415fnw color MFP with this HP document: Uninstall HP printer software.
3. Repair disk permissions on the Mac.
4. Check for and install any and all updates on the Mac.
5. Downlaod and Install the printer HP LaserJet Pro CM1415fnw color MFP software.
I hope this helps and will allow you to have more continual functionality with your Laserjet.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Scanning Problem - HP Officejet Pro 8500a

I've had a problem with scanning from my iMac running 10.6.8 (and lesser versions) to my HP Officejet Pro 8500a over my wifi network.
Printing works flawlessly. When I try to scan a single-page document or photo, it scans only about HALF of the page then stops. It doesn't matter if I scan using the Preview, Print and Fax or what.
I've searched these forums for anyone reporting a similar problem but can't find any.
Any help would be appreciated. Apple Support has not been helpful.
Thanks!

Try this: Open the HP Device Manager. Click Information and Settings. Select Scan preferences from the drop down list. Uncheck the box that says Skip Scan Preview Window. Now when you scn, you look at the preview and drag the lines to whatever you want to scan.

Follow-up to HP Photosmart C6180 Scan Problem

I posted the below a few days ago and since then have spoken with a few people who have experienced the same difficulty. We came to the conclusion this problem began after a recent driver update from Apple (sorry we can't remember exactly which one-about a month or so ago we think). Again any comments/suggestions would be very helpful. Thanks!
Until recently I have been able to scan wirelessly to my iMac G5 using my HP Photosmart C6180 which is equipped with a wireless card. (wireless network being run on Belkin router) However, about 3 weeks ago, every time I try to scan I get an error message saving the scanner cannot be initialized. If I desire to scan, I must connect directly using USB cable and initiate scan from the HP. Any assistance/suggestions will be most welcomed.

I have been working on this for months and tripped over the solution today - it works on all models * OS's and is network related.
Fix as follows:
1. Open HP Device manager program
2. Select maintain printer form info & settings drop down - this open printer utility
3. Click open embedded web server
4. Select Networking tab - from connections menu select wireless
5. Click advanced button
6. Go to bottom of page and check ALL "compatibility" check boxes
I just scanned a 50 page document and so did a friend with same problem with a new all-in-one and windows XP pro - same problem - same fix.

WLSE Radio Scan Problems

Similar Messages

Maybe you are looking for