Work Order not appearing in ASCP workbench

I have a sales order for 1 unit for an ATO item and a WO for the same item has been created by progressing the SO.
WO is also marked as FIRM in the Discrete jobs form.
MRP net quantity on WO is 1.
SO is past due.
WO completion date is 14th August 2014
WO status is UNRELEASED
Upon the running the unconstrained plan, the sales order appears and a planned order is created.
Why is the WO not shown in the ASCP workbench?
Note: Before i marked the WO as firm, it was shown in the workbench and was pegged to the SO. But not after marking it as FIRM in the Discrete jobs form.

Can you check if your job is present in this view mrp_ap_wip_jobs_v and if not then check the underlying queries filtering job out..
Also what is the job status, please note that out of all the below statuses only the below bold one are collected.
Unreleased
Released
Complete
Complete - No Charges
On Hold
Cancelled
Pending Bill Load
Failed Bill Load
Pending Routing Load
Failed Routing Load
Closed
Pending - Mass Loaded
Pending Close
Failed Close
Thanks,
Abhishek Sharma
Please mark the post correct or helpful, if answered

Similar Messages

Safari app not working, webpage not appearing and unresponsive. Calling all iphone 5 experts for help!!!!!!

Hi, need help. Safari app working fine until just now. Webpage not appearing and when trying to open the app, its a white page. Like you see pages, bookmark, the search tab, but when trying to press any of the buttons, it is unresponsive. When i try to go to setting to see if the problem can be fix, my safari setting isn't open either. I try going to icloud and try to turn off and on the safari data, in hopes that it would work. Nothing. I have done reseting network, and currently resetting all setting to see if this will work. I also did a soft restart, hard restart, turn on and off the phone multiple times. All other apps are responsive but safari. My itunes won't let me sync my phone and in order for me to do that, i would have to reset phone to factory setting, which would be a last option for me.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
No data is lost due to a reset.

Work items not appearing in NWBC work overview

Hi,
I am using NWBC work overview to execute work items (EHSM3.0 - Incident management).
I have a custom workflow with one custom task (of type Standard). When the workflow gets triggered I can see the work item for my custom task in R/3 inbox (which we access using Tx SBWP). But the same work item is not appearing in NWBC work overview.
When I replaced my custom task with standard task TS00500003 in the workflow, it did appear in NWBC work overview.
I added an entry in table IBO_C_WF_TAS for my custom task with following details but it did not resolve my issue.
Application ID: EHHSS_INBOX
Task ID: <custom_task_no>
Default Action: INCIDENTEDIT
Is there any other setting/config I need to do in order to view work items (for custom tasks) in NWBC work overview?

Hi,
This is a job of portal consultant to launch SAP GUI for portal UWL workitems also similar to SAP SBWP.
Your portal consultant will be the best guy to answer.
Regards,
Ibrahim

ME 9F - P.O Amendment to purchase order not appearing

Hai,
Recently we moved from ECC 5 to ECC 6
We face a issue in P.O printout
Eg:- When the P.O created & released now the print taken and found okey. (no goods are inwarded)
in this condition After taken the printout , Thru ME22N , i am adding 2 more line items in the p.o & deleted the existing line items and inserted some text in the Headed text . due to value changes , its been released, if we take the printout thru ME9F
The following issue noticed.
1) The Header text which is inserted its not appearing in the P.O
2) " The AMENDMENT to Purchase order " should come at the Top of the P.O , its not coming.
But same getting is working if we test thru ECC 5.0 ,
Is anything need to be done spcifically for ECC 6.0
Regards,
Suresh.P

Hi,
Please do the following check,
Go to SPRO - MM - purchasing - messages - output control - message types - define message types for PO - Execute
under fine tuned control : PO - For the PO printout condition type , ensure that short description New and Change both are maintained.

Sales orders not appearing in MD04

Hi,
Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
regards
sachin

sachin arora wrote:>
> Hi,
>
> Certain sales orders are not appearing in MD04. They belong to a particular sales organization. What could be the reason and how to resolve such thing.
>
> regards
>
> sachin
Hi Sachin,
MD04 is the stock requirement listing.
Normally it would not list general sales order that is Make to STOCK scenarion. It would not list those sales order as that requirment is taken care by PIR (planned independant Requirment).
However in scenarios like MTO (Make to Order) or Plan to assemble to name a few. MD04 will list the sales order.
For that you need to change the STRATEGY GROUP in Material Master to Planning with Asembly or Make to Order in MRP3 Tab.
Once you save the sales order for such a material it will get listed in MD04.
Hope it helps.
Thanks & Regards
Abhishek Swarup

Third Party Orders not appearing in billing due list. Item Cat billing rel 'F' & VTFA Billing Qty E

I had a requirement to do my customer billing for third party scenario before doing the invoice verification.
The solution that was proposed was to make the following changes,
In VOV7 (For TAS )item category the billing relevance should be (G) and
in the copy control VTFA at item level for item cat (TAS)maintain the billing qty(E).
http://scn.sap.com/thread/3522580
The problem I faced with the above config change was that nothing was appearing in the billing due list and when I tried to do a billing from the order directly, it would not let me.
Then I made the following change,
In VOV7 (For TAS )item category the billing relevance as (F) and
in the copy control VTFA at item level for item cat (TAS)maintained the billing qty(E).
Now after the MIGO is done based on the PO, the system allows me to do a customer billing from the SO before the invoice verification. But still this SO is still not appearing in the billing due list. Have any of you experts faced the same problem? How can I get this to appear in the billing due list? Or in other words, how do I identify open third party sales orders that are due for billing?
Thanks and regards
ES

@ Joan, in that case invoice verification would now be necessary anymore right? In my case i need the invoice verification to happen...but at a later stage
With the existing config...i.e. F as billing relevance and E as billing quantity, I now tried doing a MIRO immediately after the MIGO and then it appears in the billing due list. So basically I think its the billing relevance F...and if I want it to come in VFO4 before MIRO, perhaps a tweak in the logic of VFO4 to include billing relevance F + billing quantity E ?

3rd party order not appearing in billing due list

Any 3rd party sales order is not appearing in VF04. all the copy control configuration is standard.
i checked many SAP notes. we are able to update the status by using SDVBUK00 program but that cannot be run for all the days. any idea if there is any other root cause?
when we check the status of the field VBUK-FKSAK it is blank. when we run the program SDVBUK00 it changes it to the desired value of A.
Edited by: Nimit Kaul on Nov 8, 2010 1:44 PM

Did you check the below OSS notes? Also check the allied notes in it.
1) Note 210500 - Billing status of a third-party item
2) Note 210561 - When is a third-party item displayed in VF04?
Per this notes, check the item relevance for billing in t.code VOV7 and set the value as B - order related in accordance with order quantity or value as F-order-related in accordance with invoice receipt quantity and check.
Regards,

SAles Order not appearing in Sales Data Warehouse SAles Order List

Hi Gurus,
Can you help me in this regard :- My Sales Order has been invoiced but its not appearing in the Sales Data Warehouse Sales Order List.

Hi poonam,
I don't get clearly, but mean here your sales order doesn't exist in your cube or ODs in BW.
If so check the delta load has been done or not.
Before that check in tables VBAK (Header data) and VBAP (Item data) , wheather your sales order exists.
Hope this helps.
Regards,
Reddy

Purchase order not appearing as commitment for next fiscal year in KOB2

Hi Experts
Any help on this is highly appreciated.Our Fiscal year 2008 is ending on 27th september and fiscal year 2009 will start on 28th September.
We have some purchase orders created with delivery date as 30th september which falls into next fiscal year. Somehow these purchase orders are not appearing as commitments in KOB2 report even with data ranges for next fiscal year.
However we have many similar Purchase orders with delivery date in fiscal year 2008 with same internal order as account assignment and they are correctly appearing as commitments in KOB2 report.
Can you please let us know what could be the reason for purchase orders with delivery date as 30th september not appearing in KOB2 report.
Regards,
Santosh

Hi Ashok
Thanks for your continued support on this. I was going through these notes today.
One observation I made was cost elements in our system were valid till 27th september only when problematic POs were created.However their validity was subsequently extended after the creation of Purchase orders.This might be the reason for system not recognising these POs as commitments.
SAP Note 534993 seems to suggest that we need to run report RKANBU01 for all such purchase orders to redetermine commitments.I am in the process of testing this out in our systems.
Could you please let me know if my understanding is correct. Thanks again.
Regards,
Santosh

Purchase Requsition not shown in ASCP Workbench

Hi All,
We created an approved purchase requisition from ASCP one month back with three line items.This requisition is shown in ASCP workbench for 2 lines items as a supply but it is not showing as a supply in workbench for the other 1 item.Are there any item level setups to be checked???
Your inputs will be highly appreciated.
Regards,
Vivek

Check the whether that item is planning enabled. Org Items -> General Planning/ MRP Planning

Sales order not appearing in MD04

Hi,
Sales order is not appearing in MD04 screen some times. I tried with different MRP types and Different strategies, But I could not found the solution.
Thanks in advance

Hi Bhagavan
1) Please check the Item Ctaegory of the sales order that you created
Is it TAN (or) TAS , Please check & revert
2)Also, check the material & plant which the sales Order is created, any MRP AREAS that you have in your Plant ?
3)In MD04, Check the following
Material :
MRP AREA :
Plant :
Check that you sleeted all the above points Correctly ?
Revert for any other info.
Regards
BRSR

VERSION FIELD FROM SALES ORDER NOT APPEARING IN COOIS REPORT

DEAR ALL,
I am working on make to order scenario. Version field from sales order not updated when im taking MRP Run for specific Sales order in COOIS Report. But when iam creating production order with T. COde CO08 field getting updated. Its very important to get vrsion field as we have maintain old sales order No. in same. How this problem will get resolved?
Regards
Atul

Atul,
"MRP run" does not normally create production orders, MRP creates Planned orders. Planned orders do not contain Sales order version. I have never used this field before, but I would not be surprised if the behavior you are describing is 'standard'. When you create a production order using CO08, you are creating a 'production order with reference to a Sales order' (which contains Sales Version). When you create a production order using, say, CO40 or CO41, or using a program such as PPBICO40 in Batch, you are creating a 'production order with reference to a Planned order', (which does not contain version).
If it is imperative that you have the Sales Order version number in all production orders, you could see if Planning Strategy 82 (Assemble to order) production orders contain the data you seek. Otherwise, I am afraid you will have to have your ABAPers write some custom code to update this field in the production order.
Another way to get sales order data into the production order, that does NOT require custom code, is by using Item Texts in the Sales order. Any text placed in the Sales Order Item Text Field Production Memo (Text ID 0006) can be configured to be duplicated automatically in the Production order in an MTO environment. Production Memo then displays as another Tab in CO02.
Regards,
DB49

Sales orders not appearing MD04

Hi
when we create the sales orders which are relevent for MRP i. e with scehedule line category CP, It should definitely appear in MD04 immediately.
oflate I am finding , there is a time lag ,between order creation time & time of appearing in MD04, of 10 /15 hrs.
I have never encountered such a situation earlier.
This is happening at times.
I am not finding any OSS notes pertaining to this scenario.
Can any one though some lighton this tell me what could be the reason.
Regards
YMREDDY

Hi,
The Sales requirements are stored in a table VBBE and VBBS, when order is created or changed. The MD04 read the records from the above tables and display the records. I don't think there is a definite answer for this problem, except check your config. and check your user exits. The problems will occure when you have more customization to your Sales order process.
If you are able to reproduce the problem then it is easy to track the issue by activating and inactivateing the user exits.
There is a program SDRQCR21 provided by SAP which fixes the sales requirement descripancies. Take a look at the Note: 25444
Thanks
balu

Bluetooth not working and not appearing in the devices manager

My bluetooth suddenly is not working anymore and i can't see it in the device manager.
I tried to reinstall the drivers but the problem persist. I have one strange USB problem happening too at the device manager, and it just appeared after the bluetooth problem. How can I solve it? One image of the problem is attached!

Try to update the IRST driver, and see if it helps the problem.
http://download.msi.com/nb_drivers/imsm/irst_intel_intel mobile express chipset_13.2.4.1000_0x71913026_81700.zip

Work Center not appearing in CM25 display

Hi All,
We have three work centers assigned to three consecutive operations in a planned order of plant XX. We have a Z (modifed version of SAPCRPG001)overall profile in CM25 with the initial selection screen where we give plant XX as the input and execute the transaction. In the output we are able to see only the data of the first workcenter whereas the other 2 doesnt appear at all.
However when viewing the same in standard profile SAPCRPG001, we are able to see the data for all the three work centers. (Red Bar graphical view)
We are unable to find out how Z profile is restricting the 2 work centers from getting displayed in CM25 output for a given planned order.
I have compared the first work center with the other 2 and could confirm that there is no any change at work center level.
What could be the issue ?
Thank you

Hi Brahmankar & Dimas,
Thank you for the above message. We have checked the above settings and observed that it is for selection screen setup. However i would like to clarify once again the actual issue, that i am facing.
I have 3 work centers in a process order (as shown in attached image 1)
. Each have different operation time. When i view this order in CM25 using standard profile SAPCRPG001, i am able to see three workcenters with respective loads along with the red bars in the graphical view (as shown in attached image 2).
Now, when i use the Z profile instead of standard SAP profile, I am able to see only one work center with its load and corresponding red bar in the graphical view (as shown in attached image 3). I am fine with seeing only one work center, but i would like see the cumulative load of all the three work centers against this work center i.e the red bar should be longer and euqivalent to the sum of loads of the three work centers.
I have explained the same in the attachment file with relevant screen shots. Please advice.
Image1
Image2
Image3

Work Order not appearing in ASCP workbench

Similar Messages

Maybe you are looking for