Work orders to material request....

hello gurus
how does MRP deal with Work Order and Material Request? wats the procedure?
thanks

Andy,
Thank you very much for your responses here. They are very educational.
I have following questions,
The Production Org is Standard Costed. What is the recommended costing method for eAM. If I use Average costing for EAM then do I have to create another org?
If create another org then how ASCP will take into account projected shutdowns because of future PMs?
If the Production Org is also WMS enabled then the Expense Account is greyed out in the costing tab of org parameters. If expense account is not created then Asset Groups can not be created from EAM. They however can be created from Item Master window?
If Prod Org and EAM org are same then how we will capturs the material cost separately for both org?
Thanks & Regards,
Vivek

Similar Messages

  • Work order's material

    What I want is :After the work order release, the User CANNOT add or remove the material in WO,
    Is there any standard configuration for this ,or do any ABAP?
    thanks

    Hi,
    Sorry I can not offer a solution but I would like to put forward my thoughts.
    If you business process is robust that you can specify all materials (and services) required to do a job before a work order is released - then I would agree with your approach. The question that I have is - what if during the execution of the work it was I identified that additional material is required, how are your going to order the materials?
    Regards,
    Joey

  • Material Reservation Process for Work Order

    I am new to the Plant Maintenance work order and material reservation process.
    Here is my scenario:
    I create a work order with a material that is maintained in WM and IM.
    Reservation is created.
    I got to MB26 to post goods issue
    Once I do this I see the qty of material moved as a negative amount to storage type 914 in IM (LS26) and stock removed out of WM (MMBE).
    Is this where the business process stops?
    Do I ever remove the stock out of 914?
    Does the material go from 914 to 916 and then get cleared out of inventory?
    Thank you

    Check [thread|PR Marked for deletion after Business Complete]  and [search|http://forums.sdn.sap.com/search.jspa?threadID=&q=PR+deletion&objID=f159&dateRange=all&numResults=15&rankBy=10001]
    -S.N

  • Work Order Material Availability Check Customizing

    Hi,
    I am currently trying to set up material availability check in the work order before saving. I am testing it by entering a material in the work order for which there is zero stock. Then clicking on ORDER > FUNCTIONS > AVAILABILITY > CHECK STOCK MATERIAL. However SAP would return 'All checked materials in order 100000317 are available' in status bar.
    My customizing is as follows:
    Define Checking Rules (SPRO):
    PM     Checking rule for plant maintenance
    Define Scope of Check (OPJJ):
       Availability Check: 01 (Daily Requirements)
       Checking Rule: PM (Checking rule for plant maintenance)
       Availability check: 2 (Check availability during order release)
        Stocks
        Include safety stock: X
        StockIn Transfer: X
        Incl. quality insp. stock: X
        Replenishment lead time
        Check without RLT: X
        In/outward movement
        Incl. purchase orders: X
        Incl. purchase requisitions: X
        Incl. dependant reqs: X
        Include reservations: X
        Include sales reqmts: X
        Include deliveries: X
        Incl. planned orders: X (check all planned o)
        Incl. production orders: X (take all production)
    Define Scope of Check (OIOI):
       Plant: (Corresponds to Work Order)
       Order Type: (Corresponds to Work Order)
       Check material availability when saving order: X
       Check rule: 02 (Corresponds to material being used)
       Release Material: 3 (No release if parts are missing)
       PRT Availability: No check
       Capacity Availability: No check
    I would appreciate if you could indicate if I am missing something in the customizing or if there is some sort of error. I would like SAP to display a system message on the status bar stating that this material is not available once the user enters this material.
    Regards,
    Nikolai

    I'am facing the almost the same problem. Could anyone tell me:
    1. How to make material availability check work  during Work Order creation?
    My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
    I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
    I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
    2. How to make  information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
    Thank you
    -amoonra-

  • How to stop G/L from defaulting material group in work orders

    Whenever we create a work order, the material group is pulled from the material master. But, if we have a component on a work order and don't enter in a material number, the material group defaults to electric supplies. From my research, it looks like it is doing this defaulting based upon the default G/L account assigned to components of work orders. Does anyone know how to stop this defaulting?
    I might be completely off and it's not related to G/L which in that case this is not the correct forum, so if someone is knowledgeable about this let me know and I can switch the forum areas.
    Thanks,

    hi ,
    Please check the Account Assignment In Po you have created .
    for expamole if Po is created with account assignment ctegourt K than account modification is VBR
    as in below Path and screen shot
    Now check Material group valuation class if you are short text in PO or  material master valuatiobn class if you are material Number .  For expamaple its is 0001  liek ypur case . Now
    Check combination in OBYC in GBB transction  for VBR( Assignment category is K in PO ) and  valaution class ( of Material master or material group )
    Many Thanks

  • Updating PO confirmation and ASN through Work Order Confirmation

    Hi,
    We implemented PO collaboration and Supplier is doing PO Delivery confirmation and ASN.Now we are implementing Work Order Collaboration and system  created Work Order with reference to Purchase order.
    I want to know whether PO confirmation  and ASN date gets copied from Work order dates(after doing confrimation for phase Transport).
    I want to know what setting we need to do as presently it is not getting copied to Work order. And I want to know how it updates ECC confirmation tab for Purchase Order.
    Please do the needful
    Regards
    Raghavendra Pai

    Hi Raghavendra
    The above validation check will prevent supplier confirming purchase order request lines in PO details screen, so only supplier can confirm through WO confirmations, i.e by accepting the work order request lines in delivery overview, adapt the work order
    This will make the work status as CIAG from CINE, in negotiation to in agreement
    Then you can publish the work order, this will copy the confirmed data from the work order as identical request data and confirmation data to the purchase order. this data will be picked by ROC_Out and updates the po data in backend
    Please check whether ROC_out is available in customizing
    SPRO-SNC-BASIC SETTINGS-PROCESSING INBOUND & OUTBOUND-PROCESS TYPES OUTBOUND MESSAGES
    ASSIGN OUTBOUND MESSAGES TO DEFAULT PROCESS TYPES
    REPLORDC_O ASSIGNED TO ICH SUPPLIER COLLABORATION
    Still if does not trigger, kindlly check the log slg1
    it could be problem with ODM's ,POS etc
    Best Regards
    vinod

  • [PM] - Work order (shifted) capacity availability check

    Hi all,
    I've created a shifted capacity work center (1 person) and attributed to it a planning intervals:
    As you see, this person is available during the first shift on Sunday (07.08.2014)
    I've tried to see if SAP will check the availability of this work center in the IW31 menu by planifying a WO in a non availability time of this work center (interval 4PM - 8PM)
    But SAP mention that capacities are available
    Could SAP check the availablity of persons
    (sorry for my English)

    Hi Anand,
    That's why I'm talking about finite scheduling, the example that I've put in the start of this topic shows that:
    - The technician is available by default from 3PM to 11PM (capacity)
    - Specially, on the 07.09.14 (the last day of the inteval), the technician was declared available from 7AM to 3PM
    In the work order, i've requested a job from 4PM to 8PM (normally the technician will not be available in this interval)
    But as an output, SAP shows that the capacities are available (in this case, SAP refers to the default capacity and not the special interval..)
    So i wonder to know how SAP could deep analyse the availability interval of every capacity (taking on consideration intervals)
    @Kaushik: The 3rd screen capture shows "person responsible" that is different from the work center (MT-MED)..
    Waiting for your reply guys !
    Regards

  • Work Order DFF during Release

    Hi All,
    We are evaluating if we can populate Work Order DFF while creating work orders from ASCP.
    User will select planned orders in ASCP for release. Then the user can enter some field in ASCP.
    When the planned orders are released, this field entered should be populated in Work Order DFF.
    Request any pointers how can we achieve this.
    Regards,
    Yash

    Hi,
    Could you please share the solution what you did, so that i can check will it help for my requirements.
    Thanks,
    Suresh

  • So where we see the status of this work order request

    Hi All,
    I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is “Submitted for Approval”.
    So where we see the status of this work order request
    Thanks,
    Kumar

    Hi
    You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
    variant conditions to define surcharges and discounts for a variant
    Variant u2013Pricing steps
    Create condition record
    create a procedure where you enter the reference from the characteristic
    Assign the procedures to either the characteristic values
    configure the material in the sales order
    The net price for the material is displayed
    If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
    In addition, the Conditions pushbutton is displayed.
    On pressing this pushbutton,
    One can see which conditions have
    influenced the price.
    I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
    Thanks

  • Material Availability check during work order creation and Release

    Hello All,
    We are checking material availability at creation as well as release
    Say we have Material XYZ=100 in stock MMBE
    Now XYZ =100 is say at normal storage location =75
    and scrap storage location=05 and serviceable =20
    Currently when availability check is performed it checks for 95 (It excludes scrap storage location 05 )
    but we want  Availability check to be only for normal stock =75 and not for Serviceable and Scrap location
    how to do this in configuration or via exits
    Since if the material is under Scrap location it is not counting in Availability check at work order creation this logic is working fine but I do know from where this control is put that when the material is in the stock of scrap it is not counting in Availability check for work orders.Same thing I want to extend it to Serviceable stock .
    Why not it is consider it for Scrap storage location , what is config or any MM enhancement
    So that when Availability check run it will not consider Materials at SCRAP as well as SERVISABLE storage location also.
    Please have your views on this
    Regards
    pratap

    Hello
    There are two option for your requiement
    1. Changing the status of the servisable storage location stock to restricted use stock . You can include or exclude this stock status material in OPJJ. This solution is not storage location dependent. It is stock status dependent.
    2. Please refer the enhancement for the storage location determination. I am not sure about this funtionality:
    For production orders the following enhancement is available:
    PPCO0005 enhancement for storage loc. determination/backflushing
    You can use this enhancement to change the storage location and the indicator 'backflushing' in the reservation.
    The enhancement PPCO0005 contains the following enhancement components:
    Function exit
    EXIT_SAPLCOSD_001 storage location determination/backflushing
    You can find the description in modification text of the function exit.
    You can find an example of the user exit in the function group XC01 in the include LXCO1F05.
    warm regards
    Ramakrishna

  • How to find the material received in warehouse for work order through table

    Dear All ,
    I am creating alerting system We have  requrirement that if the notification or work order is pending for 10 days then alert to be sent to planner and 20 days to his senior and 30n days to his senior
    We have created FM for this  every day program will run and check open work orders and notification pending for some days
    Now my question in the FM I want to add fields for material receipt
    Idea is say for refuebsihment order pending material is received in warehouse now when this is received alert to be send in the work order planner that material is arrived
    From which tables I can track this and how to know for the alerting system that material is arrived in warehouse so alert to be send
    please reply
    Regards
    pratap
    Edited by: Pratap bhikai  Ingole on Jun 5, 2010 9:20 AM

    Hi ,
    With reference to your second point , if your looking for some alret then whenever you have goods receipt or goods issue of stock material you can have a mail triggerred through workflow .. in our project what we did was , we had a user status ALMR - All Material received and this is SET by a  Z programme which checks whether all stock materials or non stock materials against the order have been received and sets the user status and this programme is run as a batch job with 30min frequency ....
    regrds
    pushpa

  • Payment Card Information with Material Groups and Work Orders

    When processing purchase transactions that were purchased using a payment card, standard functionality in SAP says the system automatically generates a parked document with authorized users allowed to post these documents. When these documents are being posted, does anyone know if the user can enter a material group and/or a work order number for reporting purposes?

    >
    Monique Stephens wrote:
    > Training is not the issue.  Material groups are a matter of personal preference.
    >
    > My main concern is if it would be a violation of SOX if the material group is changed from the original shopping cart on the PO itself.
    >
    >
    > Monique
    If your business is privately held then SOX does not apply to you. If your business has stock w/shareholders then it does.
    Correcting or making the material group more accurite is something that would be MORE SOX complient and not a violation.

  • Supressing non work day messages for material requirments on Work orders

    Message CN687, pretaining to delivery date of materials takes into account the factory calender/nonwork days of the calender associated to the plant. This message pops up for every material line item on a work order, One could understand how involved it can be if ther are a number of materials on a work order, as you would have to enter passed each warning before continuing.
    Is there a way without preforming a mod that will allow us to supress this message on the work order side. Supply chain still wants to see it, however maintenance does not?

    Hi,
    As per my understanding your planned order is scheuling for 2 days.Check teh capacity view in the std plang book and check the date on which the capacity is being shown.IF the same is not showing on 15th then the problem is with scheduling not with capacity load.
    Also check the factory calendar assigned to resource master data.Check the date 15th on the bucket capacity on resource master SNP bucket capacity view.If the same is showing as working day then the master data needs to be changes.
    Hope this can help.
    regards,
    kaushik

  • How to block material issue to work order

    Dear Expert,
    How do block material issue to work order when the item have been flag for deletion in MM module and have also been block for procurement and inventory in mm module.
    Please help

    Hi,
    Thank you for the prompt reply, what you mean by the Standard SAP? can you provide the reference link? I am facing the problem that the item material have been flag for deletion and been block for procurement and inventory in MM module material master data however it still able to material issue to work order. Any ideal how to block the material issue to work order when the material item have been flag for deletion and block for movement in MM material.
    Please help.

  • View labor and material costs in plant maintenance work order

    Hi
    I am aware we can bring in the costs in the work order through Activity types and assigning the costs to the acitvity type.
    Is there anyway we can bring in the actual cost for the work performed by the associate? should we link the work center to HRMS?
    Please advise. I need your valuable input for all the points below.
    Main points that need to be addressed:
    1. Each associate that is capable of confirming hours to a work order needs to be assigned an hourly rate that is reflective of the actual cost for the work performed by this associate. These hours are then tracked through the work order to give a cost for labor assigned to that particular job.
    2.Any materials used in the performance of the required task(s) dictated by the work order will be assigned to that order. These materials can be assigned through SAP purchase requisitions, tool crib spot buys, or procurement with a purchase card.
    3.Standard reports need to be created so we can track the total maintenance costs for any level of the equipment hierarchy as currently set up in SAP. When this report is created it should show the total maintenace costs for all the levels of the equipment hierarchy broken down into labor cost and material cost.  I am using Tcode IW37N and IW40 . Is there any suggestion?

    Greetings Chandra,
    1) You will need to create Work Centres for your associates and create the Activity Types. You can default the Activity Type for each Work Centre and maintain the rate for the activity via t-code KP26 planning.
    2) Planned and unplanned Purchase Requisitions for Components with category N will debit the order with material costs. But what do you mean by "tool crib spot buys" and "procurement with a purchase card"? You may need to develop a solution to do such postings to the Order (or for purposes of Cost controlling, manual activity allocation similar to confirming work may be desired such as Manual Activity Allocations via CO transactions (KB21N), unless you can cover that with Purchase Requisitions and POs with "F Order" account assignment.
    3) MCI8 Cost Report should be suitable for you, once you set up the Value Categories & Cost Key Figures.
    See
    PMIS Cost Analysis Reporting Overview
    Maintenance Cost Key Figures in MCI3 and MCI8 Reports
    PM Order Value categories and costs display

Maybe you are looking for