Worldclock and Calender time zone woes

World clock gives me all the wrong times.
I am in Eastern time (Miami USA), have my time setting to automatically update (from the network) and have time zone support off (because that horribly upsets my calender which I synchronize with iCAL)
If I put in London (england) the time shows one hour ahead of Miami Florida.
Guess there is no solution for this yet.... any way to work this out in the next version of the firmware?

Hey there!
It sounds like the times for your events are changing depending on the time zone you are in. You can disable this in the settings for Time Zone Support with this article:
To disable Time Zone Support for calendars
Tap Settings > Mail, Contacts, Calendars.
Scroll down to Calendars.
Tap Time Zone Support.
Slide the slider for Time Zone Support to OFF.
iOS: How to adjust Time Zone Support for calendars
http://support.apple.com/kb/ht4576
Thank you for using Apple Support Communities.
All the best,
Sterling

Similar Messages

Entourage: "Event and computer time zones do not match."

Since installing the latest update to the Mac OS (10.4.6) I have a glitch with Entourage (Office 2004 for Mac v. 11.2.3) and I believe it has something to do with the Mac OS. See below for explanation:
When adding a new calendar event to the calendar, I get an error which reads:
"Event and computer time zones do not match. In Calendar views, the event time is adjusted to display correctly." This is not true. I've checked the time zones in both my OS and Entourage and that is not the problem.
It must have to do with how it interacts with the latest update of the Mac OS. I had not updated software on my laptop for a while, and it did not exhibit this error, so as a test, I downloaded and installed the latest version of Office and tested Entourage: no error message. To be sure, I restarted the computer and tried again: no error. Then I downloaded and installed all of the latest updates to the Mac OS using Software Update: I got the error. So, I think the problem is the interaction between the latest update of Office 2004 for Mac and the latest Mac OS or maybe even just something in the Mac OS.
There are plenty of people complaining about this on the newsgroups at Mactopia. I'm not sure who needs to repair this problem - Apple or Microsoft, but does anyone know if there will be a patch issued by Microsoft to fix the problem? Or maybe my assessment is wrong and you have another solution?
Thanks very much for your help with this problem.
Dual G5 2.0 and Powerbook titanium Mac OS X (10.4.6)

I am in Ohio (eastern time) and I am also having this problem. It is not annoying but my problem is I am not able to schedule any meeting on Entourage. (It will not show if the person I am inviting is busy or not). They use the Exchange server in my company, and I read on the microsoft site that public folders and hence the calendar items are not synced. But seems like this page is for Office X and not 2004. Any clues? Is the time error related to me not able to schedule meetings? I am using latest 10.4 and Entourage 2004.
http://www.microsoft.com/mac/resources/resources.aspx?pid=resourcekits&rk=office x&article=/mac/officex/ork/KnownIssuesEntourage.xml
MacBook Pro, iMac G4 Mac OS X (10.4.7) 2 GHz, 2G RAM

Entourage- Event And Computer time zones do not match. Please Help

Event and computer time zones do not match. In calendar views,the event time is adjusted to display correctly.
Whenever I set up a appointment I put it in at one time and it show up as another.
PleaseHelp

I am in Ohio (eastern time) and I am also having this problem. It is not annoying but my problem is I am not able to schedule any meeting on Entourage. (It will not show if the person I am inviting is busy or not). They use the Exchange server in my company, and I read on the microsoft site that public folders and hence the calendar items are not synced. But seems like this page is for Office X and not 2004. Any clues? Is the time error related to me not able to schedule meetings? I am using latest 10.4 and Entourage 2004.
http://www.microsoft.com/mac/resources/resources.aspx?pid=resourcekits&rk=office x&article=/mac/officex/ork/KnownIssuesEntourage.xml
MacBook Pro, iMac G4 Mac OS X (10.4.7) 2 GHz, 2G RAM

Can't open and lock time zone table error on every open

Acrobat 8 standard, windows XP Pro
080416 14:22:43 [Warning] Can't open and lock time zone table: Table 'mysql.time_zone_leap_second' doesn't exist trying to live without them
I get that error message in the log every time I open 8. What gives with this program?

This error is usually caused by a corrupt ppt file or an incompatible font.
A quick work around is to recreate the presentation in Keynote from scratch using the images copied from the original.

Why does my iPod say Connot connect to the iTunes store when my iPod is up to date and the time zone is okay

why does my iPod say Connot connect to itunes store, when my iPod is up to date and my time zone is okay?

Hey Hiika,
Do not forget to check the Date and Time and make sure that it is set to Automatically. Check out the article below to troubleshoot your issue further.
Can't connect to the iTunes Store
http://support.apple.com/en-us/HT201400
Take care,
-Norm G.

System time zone and User time zone is differenct.

Hello friends.
We use SRM 5.5 with classic scenario. (SP07)
Our system time zone is CET.
Now if we have a user different with a different time zone in the user master, for example, a UTC+9.
We can end with up with a received date in service BBPBWSP_SIMPLE that is before the created on date in the shopping cart.
A shopping cart is created at 2006.05.10 but the received date in Approval says 2006.05.09.
So approver can be confused the requested date.
Is this standard bugs or standard design?
How can we change the received date with user Time Zone?
Thank you,
Best Regards,
SH.

Hello,
As far as I know, if you do not populate the field "of the user" in SU01, system takes the pattern timezone, which is UTC, to display to the end user in web gui.
I did the following test:
- I created a RFX with a user who's timezone (in tx SU01) is set as:
Sys. Time Zone     CET
of the User        INDIA
- CET time was 20:01:55
- GMT time was 18:01:55
- India time was 23:31:55
Looking at this RFX in BBP_PD I see the following:
Same user (India timezone and CET as "Sys. Time Zone"):
Created_At: 20:01:55
Changed_at: 20:01:55
DETAILS ->
Created at: 18:01:55
Changed at: 18:01:55
RFX header (description): 23:31:55
So, if you want to populate the header document in WEB GUI with another time zone than UTC, you have to use the field "of the user", under Personal Time Zone. However, if you want to display the UTC time zone in header documents in web gui, you can leave this field empty.
Kind regards
Ricardo

Time-Zone Help. User Time Zone and SAP Time Zone!

Hi Experts,
Guys, I want to know how to check and change time in SAP system. The reason I want to know if when I go to su01 and display my user, under Default tab>> Sys. Time Zone is different. So, I am guessing that I have to change time zone which is causing my CCMS-Alert auto-reaction.
Thanks,
I will reward points.

Hi Prince,
Cool!! Just wanted to confirm and clear things up.
1. My OS time is PST and upto date. I have checked by typing date in unix.
2. As you have mentioned (Txn STZAC). I think STZAC is a T-code in which I can change time zone but what is Txn? Also, when changing time zone, do I have to make client modifiable in se06?
3. As you have also wrote that I can add (TIME_ZOME) in parameter of Auto-reaction Z_method. Just to confirm, is that how I will add.
Parameter Name: Time_Zone
Parameter Value: PST
on the Parameter value, do I need to add any syntax or characters such as $PST, (pst) etc...
Thanks for your help!

Blackberry and changing time zones

Is there a way to make the Blackberry change according to local time zone? my other cell phones got the time from the carrier's system, and if i changed time zones the phone would display the local time it got from the tower. But the Blackberry stays on it's original time, regardless of where I am.
Steve

No, you can't change that. BlackBerrys do not automatically change with the timezone.
There are valid reasons for that, regarding the calendar and the way it adjusts the times of scheduled meetings.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time and date + time zone

Hi. For any reason, despite Manual says, in Time & Date I will find an option to enable / disable "Daylight Saving Time", it simply doesn't exist in my iPod options.
Second issue is, when I connect my iPod at iTunes, the setted Time Zone in iPod (marked as Sao Paulo - Brazil) change automatically to Anchorage (???). why this?
not good, is apple forcing me to throw away my iPod and buy a new one?
MODEL MB261LL
VERSION 1.1.3PC

Try Calgary.
Stedman

Process order and user time zone

Our system server time zone is CET but we are using EST for user time zone and plant. When we create process orders, the creation date/time is using the server time zone CET.
I understand that in the database, the CET time is used but Is there a way to show the timestamp in the user time zone EST?
Thanks,
Ghislain

Hi Lisa:
We usually let USers maintain their own time zone even though its different from System Time Zone.
When it comes to SAP systems, BASIS usually maintains this and it will most proabably the time in their zone.
And users have their own time zone.
It effects only for support Deelopers who migh tlook at failed jobs in SAP/BW and try to decode them. In this case, they will have to know the differences in TIme Zones, but its not a bog problem.
Ram C.
Message was edited by: Ram Chamarthy

Appointments received showing one hour forward and Reykjavik time zone

My appointments received are showing one hour forward and Reykjavik as the time zone. When I check them on my outlook desktop they are the correct time. I've checked my time zone ans settings on my z10 and they are correct. I can correct them using edit on the phone but don't want to have to do this each time. Am I missing something?
I saw a post from another time zone which said it was a bug that the developers were working on and a work around was to alter the time zone on the phone by an hour but surely this would alter the time on the phone?

I have tried the same BES installation with an Exchange 2010 Server. No problem with the time zone there.
I have testet an 10.1. Smartphone with Exchange 2003. No problem. All of our 10.2 devices have this problems. On two of these devices the sync of the caleneder has stoped completely. Im now searching for a was back to 10.1 on the affected blackberry devices.
Any hints are welcome

JRE 1.3.0 and new time zone

I have a client that is using JRE1.3.0 on a UnixWare system. The version of UnixWare prohibits upgrading the JRE version. Will the TZupdater131 tool work on 1.3.0?

Hi
Same problem on a Winnt4 box.
I've tried to install an jdk1.3.0 or 1.2 after this troubleshooting, no effect. After the files copy, a Dr Watson Window appears with INS5176.MP.exe message.
If you have a solution .... Thanks.
Gih

Changing date and time is wrong with time zone problem

Okay, searched some of the forums, but didn't get the most correct answer to this:
I just imported all my photos into Aperture from iPhoto (chose to have Aperture manage files as I don't plan on using iPhoto any longer. When I imported the files, I decided to do some organizing by date into folders. no problem.
In some of my projects, I found some files that I imported from scans or got from others who had a film roll and processed it at a lab, and the dates from those files aren't the dates that the event took place. I went into Metadata>Adjust date and time, and changed the date (not so much the time I'm worried about), and checked the "change the masters" little box, too.
After I close out of that box, the picture has the wrong date. I've determined this is because of the time zone support. I currently live in Japan, and I would like my photos here to show up as the date in the place they were taken. I think the date I enter, it thinks is the date I'm currently in (GMT +9), but aperture chooses to convert the date as if I was saying "hey, the picture I took happened on "date" in GMT +0:00)" which then makes it look in the metadata view as if it happened a day earlier.
Any imported photos come in as the correct date and time and correct time zone, as far as I can see. It's just when I change the date and time it thinks I mean to have aperture convert it to GMT + 0:00. (but on a little more of a funny side... older pictures that happened in other time zones back in the states it lists the correct date and time for when the picture was taken, but "says" it's GMT +9:00) (another issue I'll deal with later maybe!)
Hope I've described it in such a way that you can get it.

I changed time and now my MacBook won't work

Time Zone issue with 7.0 and DB2

Hi,
We are having a time zone issue with weblogic server 7.0 and DB2 database. I would really appreciate if somebody provides a solution for this issue.
Our db2 DB is located in PST time zone and weblogic server is located in EST time zone.
When we access current timestamp from db2, we are getting PST time converted to EST and EST time zone attached with timestamp value.
I tried to use resultset.getTimeStamp (1,<calendar>), unfortunately this method is not supported in the DB2 driver version I am using.
We want to get same value as returned by db2 with db2 time zone not weblogic server time zone.
And also when we add new record with timestamp column through web service, regardless the time zone value sent by web service client ".Net" ,
Weblogic server converts the java.util.Date value to weblogic time zone and stores in the db.
For example, client sent 17:00 hours CST, but when it gets stored in db through weblogic ws, weblogic converts 17:00 to 18:00 EST and stores in database as 18:00 hours without any time zone. When we read this value back, we are getting it 18:00 EST only not 17:00 CST.
This is fine as long as writing and reading by same weblogic server. If another weblogic server instance in PST time zone read this value, it takes as 18:00 PST.
Due to this our application always shows timestamp hours differently.
Could some body help me to fix this problem, we are getting this problem in production after we moved our DB2 location to different time zone.
Thanks
Balaji

Hi,
Check whether document in the link below is of any use for you..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFTIM/CAGTFTIM.pdf
Regards
K.M.Arun

Time zone adjustments and smart album filters

I just returned from a photo safari in Southeast Asia and while there I had my cameras set to the correct local time (GMT+7). Upon importing to Aperture I set both Camera Time and Actual TIme to the right place and chugged ahead. Now when I look at an actual image file's info the time is 'adjusted' for MST (my home time zone) but in Aperture the Meta Tooltips and Metadata show the GMT+7 time.
Now I want to create Smart Albums with the photos from each day from my (two) cameras. I've tried using the Date and Calendar filters but they both seem to use the MST time rather than the appropriate 'local' time. If I add "GMT" to the Date filter is does filter by GMT but that's not the result I want either.
Any hints on how to get this right?

Neil,
I've been struggling with similar issues to varying degrees for some time now. I have found it extremely frustrating in my attempts to adjust the date to reflect proper time zones and local times. The only time it seems to "get it right" is when I have my camera set to my local time zone, shoot in my local time zone and upload to my computer in my local time zone.
This is all fine and dandy for when I am shooting locally, but the reality for any photographer is that you never shoot just locally. That said, I have sought help on this issue myself and wrung my head to try to find an answer.
Thus far, I have come to one possible conclusion. It may have something to do with the way the computer's time zone is set in the system preferences. If you have the time zone set to "set time zone automatically using current location" this could throw things off. I am not certain about this, but I think it may have something to do with what is going on.
In your case, you had set the camera to the proper time zone, and when you imported the images, you set the camera and actual time zones to the proper time. However, if you have the time zone setting to set automatically based on location and you didn't import (or upload) the images in that time zone, it may throw things off.
For example, you set your camera for Cambodia time. You then import your images in New York. you set the camera time and the actual time to Cambodia time, but the computer time zone is set to New York EST. I think if you turn off (if you have it on in the first place) the automatic time zone setting, it may solve your problem. You may even have to set the time zone on your computer to the local time zone that you took the pictures in.
Aperture is really vague about how to go about doing this. It seems like it should be really simple and straight forward, but for months I have been scratching my head trying to figure out what is going wrong. It got me all confused as to what the camera time means and what the actual time means, etc.
Anyway, I am not sure if this is the answer that you are looking for. I am looking for answers myself, but rather than start my own thread, I thought I would chime in on yours to see if we can't get the ball rolling with some other users.
Mac

Worldclock and Calender time zone woes

Similar Messages

Maybe you are looking for