X-Fi xtreme audio and vista 32bit - bass redirect

hi,
i have
-x-fi extreme audio bulk (PCI)
-vista 32bit
-Teufeln Concept E? 5. surround set (connected via analog)
i can install the latest drivers and audio console, but the graphical console
("C:\Program Files\Creative\Sound Blaster X-Fi\Console Launcher\ConsoLCu.exe")
will fail to start with a message saying the device is not supported.
the audio console which comes with the driver
("C:\Program Files\Creative\AudioCS\CTAudCS.exe")
does work but lacks one important function, the bass redirection (crossover frequency).
is there anyway to set this option or is there a driver combination for my hardware allowing me to launch the graphical audio console (where i know u can set this option)?
thx in advance
Apfelstruhdl

Do you have original CD from your bulk card (SB0790 oem bulk)? My is somewhere lost and there is no chance to install full packet of ap
ps.
Two weeks of searching any user, what can help me - without luck... With basic driver, as you wrote, there?s no function of bass redirection. Is Creative lazy or crazy?

Similar Messages

XFI PCIe Xtrem Audio and Vista 64 b

I want to ask you guys a question, worked ok With the 4Gb memory On Vista 32 all are good, this card are a little crippled from Creative , but i dont complained. This card sound just like Extrem Audio PCI, or like SB li've 24 or AudigySE with modded into Daniel driver Xtrem Audio.

Hi,
This forum is intended for user interaction. Although the Forum is moderated by Creative employees who may provide answers to some questions, the moderators onboard are not here to provide direct support for your Creative products. If you require immediate assistance, you will need to contact http://forums.creative.com/showthread.php?t=4

Vista 64 - X-fi Xtreme Audio and Fatal1ty headset problem

Hi All,
I bought a Xtreme Audio soundcard today, and found a problem.
When I connect my headset with the front connection on my PC -> no problem
when I connect my microphone with the front connection on my PC -> no problem, mic is working.
When I connect them both, the microphone isn't working.
To fix it, I have to disconnect my headset
Is this a known issue ?
Or is there someone who can help me ?
regards,
Corn

*second bump*

Soundblaster X-fi Xtreme Audio and ALch

I bought a Soundblaster X-fi Xtreme Audio soundcard to go with my new computer as I have always used Creative and have been impressed by them. However, in Vista, my rear speakers do not seem to work. I did some research and found that ALchemy was what I needed, but I cannot get this to install. It gives me the error message that my card isnt supported. Is there any workaround for this? I feel pretty miffed having an X-Fi card and being excluded from proper sound in Vista.

There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
This download supports the following audio devices only:
Creative Sound Blaster X-Fi Elite Pro<
Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
Creative Sound Blaster X-Fi Fatalty<
Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
Creative Sound Blaster X-Fi Platinum<
Creative Sound Blaster X-Fi XtremeGamer<
Creative Sound Blaster X-Fi XtremeMusic<
?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

X-Fi Xtreme Audio PCIe / Vista - Aplications not runn

Hi,maybe someone can help me,I instalt?the new?Xtreme Audio PCIe under Vista ultimate. The SB works but everytime I want to start any of the aplications the system tells me "the audiodevice is not suportet".So there is no way to get any controll of the SB

have you got the latest drivers from the sb site. i tried to install with the disk i recieved, and nothing worked.but then when i dl the web drivers it was fine

X-Fi Xtreme Audio PCIe still no bass on "Teufel 5.1"

As the title suggests I have still no bass. Neither the PAX driver nor the latest Creative driver (XFXA_PCDRV_LB__04_0000) fixed the problem and if I am not wrong, the bass redirection option isn't designated for the latest Creative driver.
The "SB P7X Series Support Pack 2.0" seems also not to be intended for the PCIe version, the setup doesn't even start .So, is there any owner of the obove mentioned soundcard who gets bass under Windows 7 32-bit ?
PS: Sorry for my bad English -> German

Re: [X-Fi Xtreme Audio PCIe] Optical In -> Analog Out [email protected]

X-FI Xtreme Audio and Windows 7

Driver is not working properly.
As oposed to WinXP driver (on disk) there is no console application.
In Audio Control Panel I found all necessary settings, but it seems they are not working at all (such as Crystalizer, Surround Xpand and other).
And also now I can't use Bass Redirection setting.
How I can solve this problem?
And when Creative create normal driver and applications for Win 7?

?GURU, I`m having issues with the Windows7 also in the install of Audigy2ZS. I`ve had this for three years and worked fine, yet I did a new update with the old Artificial Intelligence mother board, burt out on me. That could be it. ? Since updating the software in autoupdate for Audigy2ZS and the Windows 7 may be the issue I`m getting... SPI(Creative X_Fi Module) Problem... when I install the CD from Creative Soundblaster Audigy 2ZS? . Lost. Uninstalled it several times and no go. The Itunes works ACE with the Audigy2ZS, Go figure?
Any clues?

X-Fi Xtreme Audio and no sound

This is really getting annoying. I had a X-Fi Fatality FPS before (which had no optical on the back), and then i bought a X-Fi Xtreme Audio.. but.. The mic just doesnt want to work. I connect the mic jack to the only input there is - where the mic icon is aswell - and.. nothing.
The mic is enabled in windows, but it sees the input as Line-In, and not microphone!
Im using this driver: XFXA_PCDRV_LB__04_0000
How do i get this working? (The mic isnt broken)

Got it fixed. The newest driver supplied by Creative, doesnt have the "Creative Console Launcher" - which means you cant switch the mode of the FlexiJack.
Good job Creative.........................

X-Fi Xtreme Audio and optical in (win

hey, i bought an x-fi xtreme audio specifically so i could hook up my xbox to my computer speakers through my sound card via an optical cable.
I hooked everything up, but i dont see any option in audioconsole to let me have my computer recieve audio through the optical input, decode it, and output it through my speakers.
I hear theres supposed to be some sort of digital i/o tab, but there is none.
these?are the tabs?i?have?in audioconsole:
X-Fi Crystalizer | Headphone detection | performance | restore defaults | device information | speakers | eax efefcts | X-Fi CMSS-3D?
any?help?on?this?would be greatly appreciated.

i found a simple workaround for my problem.
I uninstalled all the creative drivers and software, then disabled the card from teh hardware menu. i enabled onboard sound in teh bios and installed the drivers that were on my motherboard disc, and the line in worked fine right off the bat.
im?a long?time?customer?of creative ever since my?first sound?blaster 6?and?i?would?have sworn by?all?their?products, but?the?last tow sound cards?i've gotten from them,?the?audigy?4?and?this xfi?have given?me?nothing but problems. ?now i see what theyre doing, not supporting windows xp anymore, and im?now done?with creative for good.
bye.
Message Edited by DavyC42 on 05-4-2008 08:26 AM

X-Fi Xtreme Audio and A

Hi. Does Xtreme Audio support Creative ASIO drivers for low latency recording?

Never seen mentioned it would ... asio4all driver should work w/ this model too.
jutapa

Premiere Elements 3 and Vista (32bit and 64bit)

Are there any known compatibility issues with Premiere Elements 3.0 and Vista. What about Vista 64?
Thanks!

There is a patch for PE3 for Vista. Not supported under Vista 64.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3565

How do I change Line-In / Mic mode? X-FI Xtreme Audio PCIe & Vista 64

Hey!
How can I change the back panel connector from Line-In into Microphone mode?
I havent found this option from anywhere in Vista or Creative Audio Console settings. I would like to use my microphone throught the back panel, but when it is in Line-In mode I cant get any audio out.
Message Edited by stounedi on 02--2009 0:59 PM

Hey!
How can I change the back panel connector from Line-In into Microphone mode?
I havent found this option from anywhere in Vista or Creative Audio Console settings. I would like to use my microphone throught the back panel, but when it is in Line-In mode I cant get any audio out.
Message Edited by stounedi on 02--2009 0:59 PM

DD/DTS decoder on X-Fi Xtreme Music and Vista x64

Running X-Fi Xtreme Music in Windows Vista Business 64 Bit, connected to 7. speakers (analog, no external decoder).
The most recent driver 2_8_0008 enabled the decoder tab in the soundblaster control panel. So I switched to internal decoder. Played a DVD in PowerDVD, setting output to S/PDIF. Everything like I did in Windows XP, but no sound in Vista. Help please!

The rest of the system is 8800GTX, Corsair 580w PSU, Intel Core 2 Duo 4300 @ .8GHz.
As I said I have tried pretty much everything I can think of, I bought the card brand new from eBuyer. Basically am i missing some files somewhere that I should delete before attempting a re-installation of the drivers?
Thanks for the reply CLKillerWanted.

X-FI Xtreme Audio and Gigabyte motherboard - machine won't mount di

Hi,
I just bought me a nice new audio card, as the onboard card on my motherboard isn't all that (I think).
Now here's the issue; After installing the new card in the second PCI slot, thus leaving an open PCI slot between the PCI-E slot (which holds my video card) and the PIC slot I used for the audio card, when booting up the machine it won't actually load any OS (I use GRUB to multiboot). It complains about a wrong device, disk read error, and all kind of funny things. Turns out for some reason my DVD player isn't recognized anymore as far as I can tell, and this completely changes the boot order. Also, when touching the dri'ves when it's booted, I don't feel any actual activity. Booting takes a long time as well with the card inserted.
Removing the audio card and turning the onboard one back on in BIOS (or just leaving it disabled) turns everything back to normal :smileyindifferent: I've also tried assigning the card another IRQ in the BIOS, but that doesn't really change anything at all...
If anyone has any idea after looking at the below specs, please enlighten me.
Tech Specs
Motherboard: [url="http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2500">ga-ma69vm-s2 with an AMD64+ 4200[/url]
Audio card: Creative Sound Blaster X-FI Extreme Audio PCI version
Dri'ves:
x SATA Disk (Windows does not know about this disk)
x regular IDE disk (which has windows on it)
x regular IDE DVD-RW dri've
Video Card: GeForce 8800GT (in PCI-E slot)
Power supply: 430W Thermaltake
Thanks for checking this out, and please post any and all ideas or if more info / testing is needed to analyze this!

Hi,
I just bought me a nice new audio card, as the onboard card on my motherboard isn't all that (I think).
Now here's the issue; After installing the new card in the second PCI slot, thus leaving an open PCI slot between the PCI-E slot (which holds my video card) and the PIC slot I used for the audio card, when booting up the machine it won't actually load any OS (I use GRUB to multiboot). It complains about a wrong device, disk read error, and all kind of funny things. Turns out for some reason my DVD player isn't recognized anymore as far as I can tell, and this completely changes the boot order. Also, when touching the dri'ves when it's booted, I don't feel any actual activity. Booting takes a long time as well with the card inserted.
Removing the audio card and turning the onboard one back on in BIOS (or just leaving it disabled) turns everything back to normal :smileyindifferent: I've also tried assigning the card another IRQ in the BIOS, but that doesn't really change anything at all...
If anyone has any idea after looking at the below specs, please enlighten me.
Tech Specs
Motherboard: [url="http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=2500">ga-ma69vm-s2 with an AMD64+ 4200[/url]
Audio card: Creative Sound Blaster X-FI Extreme Audio PCI version
Dri'ves:
x SATA Disk (Windows does not know about this disk)
x regular IDE disk (which has windows on it)
x regular IDE DVD-RW dri've
Video Card: GeForce 8800GT (in PCI-E slot)
Power supply: 430W Thermaltake
Thanks for checking this out, and please post any and all ideas or if more info / testing is needed to analyze this!

Xi-Fi Xtreme Music and Windows Vista 32 bit driv

I have a lot of problems with Vista driver. There is only one driver and it doesn't work correctly. Sometimes I have very bad noise, the sound skips, and it often has disturbance. When I connect the integrated sound card there are no problems. But I didn't give 00 $ for noise and to use intergrated soundMessage Edited by Botev92 on 05-29-20070:4 AM

Well to give Creative their due even if they took their time there are new drivers out for the X-Fi Xtreme Music and Vista and they work just fine. You can even select the different modes (entertainment, Game or Audio Creation) from within the Audio Console menu. Link:http://us.creative.com/support/downl...type=0&x=3&y=9

X-Fi xtreme audio and vista 32bit - bass redirect

Similar Messages

Maybe you are looking for