Zen Xtra firmware update fail

Hi all,
i try to update the firmware to version ZenXtraP4SAudible_PCFW_LB_2_0_03 and the program only say "Player is now rebooting, please wait..." indefinily, and the player not respond no longer anymore (no turn on, no lights, no enter in Recover mode), any suggestion? Tanks.

I'm sure it's of little consolation, but you're not alone...

Similar Messages

Jukebox Zen XTRA Firmware update fail

I have a nomad jukebox zen XTRA 40GB. I recently saw an update for PlayforSure on the creative website. As i have done earlier, i had tried updating the firmware. It asked me to backup and run the formware. I sincerely backed up and started the firmware. This went for about a minute and said its rebooting the player which never happened for a nice hour. Now the firmware is not completed and when i try to reload os from the recovery options, the firmware update program says palyer is not connected. I had verified it in DEvice manager. The player is been seen as Nomad Jukebox/ MTP device. I tried starting the player and it says "Firmware Problem". i also tried loading the original firmware which says "Player not connected". I had updated latest driver.
Any help is greatly appreciated

Thanks for the info. I just wanted to know is there anyway Creative has to redo the whole thing. Like removing all of the firmware and rebuild it. I am looking for some tool or some way to remove the incomplete firmware on the player.
Rightnow, my player is just a paper weight for me. I dont want to be used like this..
Please help me further

Zen Micro - firmware update failed so now "dead"

I have a firmware problem with my Zen Micro. Can anyone help?
The series of actions I have taken so far are these:
I got my Micro in January 2006. I now want to run Audible software to listen to their books so I downloaded the firmware update L6_2_2_02.exe from the Creative support site which is stated as providing the Audible?facility.
I backed up the Micro contents using Creative MeadiaSource Organiser. I then ran the firmware update from my Win XP PC. This started OK and I got a series of messages about what was happening. Then it stopped with the progress indicator bars about 2/3 across. I left it for half an hour and nothing changed so clicked to stop the update.
I checked the firmware version on the Micro and it said 2.2.02. The update?looked OK and the FM worked but of course I had no music content.
I opened my Creative MeadiaSource Organiser (v 3.0.09) but it said no device is connected so I was unable to reload the music. My XP PC recognised the Micro as connected and I checked Device Manager which showed the "device is working properly". I was also able to synch music to the Micro using Windows Media Player and this played OK. I tried another computer and could also synch using Windows Media Player but I wanted to reload my music from the backup.
I looked on the Creative site for the steps to take when a firmware update fails. The Zen Micro is not on the list as supporting the MP3 Player Recovery Tool so I did not use that. I followed the Reload Failure recovery instructions and ran Clean UP, then Format All, but this did not fix it so I ran Reload Firmware on the Micro. This was a big mistake!
Now when I try to run the firmware update from my Win XP PC, I select English then I get the message "Your player is not connected, please connect your player". I checked again and XP still recognises the Micro and the device is working. It is no longer recognised by Windows Media Player but just? appears to XP as an empty storage device.
The Micro now shows the firmware as v 0.0.65, but now it is stuck in Recovery Mode. I have contacted Creative Support but their reply is that this player is now over 3 years old, reached its end of service life, so there is no support other than on their web site. Following their web site recovery instructions got me into this mess so I guess?no extra help is offered from Creative.
The player is now essentially dead. Unless there is some way to get the firmware update program to recognise the device as connected, then I don't know how to fix this. This is a shame as it is a nice little player for my music collection.
Can anyone help as I don't know what to do next?

I have the same problem. I put the screenshots below and the errors that happen to me.I can not put him the firmware because I do not recognize the device.
Both windows xp windows 7 as the
DISPOSITIVO, IMAGEN ACTUAL
http://img528.imageshack.us/img528/3783/dsc0025mv.jpg
EL PORTATIL LO RECONOCE
http://img811.imageshack.us/img811/4323/dsc0026ox.jpg
MUESTRA BATERIA, PULSANDO BOTON DERECHO
http://img546.imageshack.us/img546/4855/dsc0027wj.jpg
ADMINISTRADOR DE DISPOSITIVOS
http://img801.imageshack.us/img801/4501/dsc0028une.jpg
ERROR AL INSTALAR CREATIVE SOURCE
http://img805.imageshack.us/img805/3061/dsc0029io.jpg
http://img208.imageshack.us/img208/9330/dsc0031sn.jpg
http://img545.imageshack.us/img545/7096/dsc0032qg.jpg
MP3 PLAYER RECOVERY TOOL, no me reconoce Creative ZEN MICRO como conectado
http://img528.imageshack.us/img528/1714/dsc0030qn.jpg
PROGRAMAS DESCARGADOS (pagina oficial creative)
http://img341.imageshack.us/img341/2466/dsc0033oi.jpg
DSC_0025.jpg
I need your help. I'm desperate. Uninstall Windows Media Player.
Thanks in advance

Nomad Jukebox Zen Xtra Firmware Update Issue

My player does not get recognized after attempting to update firmware (ZenXtraP4SAudible_PCFW_LB_2_0_03.exe) according to website instructions.
When turned on the player displays "Firmware Problem" for a fraction of a second, then it goes into Rescue Mode v., Boot v.4, HW v0.0., 4 items in the menu ( Clean Up; 2 Format All; 3 Reload OS; 4 Reboot)
This is my setup:
Kernel version: Microsoft Windows XP, Multiprocessor Free
Product type: Professional
Product version: 5.
Service pack: 3
Kernel build number: 2600
IE version: 8.0000
System root: C:\WINDOWS
Processors: 2
Processor speed: 2.6 GHz
Processor type: AMD Athlon(tm) 7750 Dual-Core Processor
Physical memory: 3072 MB
Video driver: ATI Radeon HD 4800 Series
Relevant Applications:
Creative Jukebox Driver
Creative MediaSource
Creative NOMAD Jukebox Zen Xtra
Windows Media Format Runtime
Windows Media Player 0
Please advise, thanks in advance,

Problem solved!
I did not follow the link you provided, thanks for the suggestion anyway. I read in another post that you advised to disable the device in Device Manager, although I took a different route. This is what I did after enabling Mediasource DETECTOR
. Completely uninstall Windows Media Player , revert to WMP 0, inlcuding the Runtime
2. Reboot the PC
2. Once rebooted connect the player to the PC
3. right click MY COMPUTER->MANAGE->DEVICE MANAGER
4. Under Windows Portable Devices right click NOMAD JUKEBOX ZEN XTRA, then select Update Drivers
5. Navigate to "C:\Program Files\Creative\Jukebox 3 Drivers" to select the driver, OK all the windows
6. Run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe with the player connected
7. I was prompted if I wanted to replace the Firmware with the same version (2.0.03) I said yes... within seconds the player came back to normal.
I hope that the above can help people in my same situation. The culprit seems to be WMP and all the hidden software installed with it. Freakin Microsoft!
Final question. Now that the firmware has been updated, am I safe by installing WMP ?
Thanks!

Firmware update failed - how to resolve remotely

I bought my father an Apple TV so he could subscribe and watch MLB. Everything was working fine until the Apple TV attempted to update itself. Apparently the firmware update failed. I need to know how to remotely resolve this for him. I can access his PC remotely so I read some info that you can update Apple TV via iTunes. I also need to confirm that the USB socket on the Apple TV is a USB Mini type. I'm assuming you can just plug the Apple TV into a USB socket and then from iTunes initiate the firmware update, much like you do an iPad. He's not very technically savvy, so I need to do this for him or have him call Apple support.
Any suggestions or help is appreciated.

If he hasn't done so get him to do the old fashioned trick of unplugging teh mains power to it and restarting.
If it restarts correctly the update can be reattempted.
If it's truly bricked then return to Apple or restore using itunes will be necessary.

How does someone become a beta tester for Zen Xtra Firmware

I have a lot of experience in Hardware/Software integration and am interested in becoming a beta tester for Zen Xtra firmware. Is there someone that a mod could put me in touch with to pursue this oppertunity?
Thx in Advance
Dustin

There is a beta programme, but I'm not sure how you apply to be a tester.
At a guess Creative pick people they know, or if they need to recruit they'll post on the forum.

Creative Zen Xtra Firmware not updat

Hi everyone,
After a few months of disuse I got out my old Zen Xtra 30GB. I turned it on and it booted to Rescue Mode. I formatted everything and erased the OS. Now when I plug the player in (After installing the most recent drivers) Windows recognises it and Media Source makes a half-hearted attempt at syncing it, but when I try to update it with the latest PlaysForSure firmware the updater first gives me "Your player's current firmware is the same as this version. Do you want to continue?". I click yes, and the firmware updater says "Your battery levels are too low. Please charge your batteries before you proceed."
Obviously I can't charge the batteries while in Rescue Mode, so I am unable to proceed with the firmware update. The player is plugged into the mains as I do this. The player appears in Media Source (latest version) and in the device manager without a malfunction sign or anything. Also the old version of the firmware updater before PlaysForSure doesn't recognise the player.
Is there anyway to bypass the battery level check so I can install the firmware? Thanks.

You won't believe but I had the same problem just couple of days ago with the same player (but 40 gigs). I was confused just like you, so I tried to format the disk again (while connected to PC) and reloaded the OS. Then a message appeared like 'Now you can update your firmware' or something like that, so I ran the firmware from PC, and no message about a battery level appeared, and the firmware was updated correctly. Try it, and let me know if it's OK! Good luck!

Zen Micro Photo Firmware 'Update Fail

Ive tried several things, several computers. The Zen will only boot to the firmware screen if not docked. If Docked the Zen can update but at the end, it will always say, 'Update Failed!'?I was wondering if this is the Motherboard, or the Hard-dri've. I dont hear any clicks or sounds from the hard dri've.

This all started a few days ago, the Zen was playing a nice track and then it turned off, I turned it back on thinking wtf. It came on, played for about sec then said, 'Overheating Shutting Down'?so I tried a few more times and it said the same thing, it was rather Cold outside, wierd. I went home, let it stay infront of a fan for a few hours and thats when it wouldnt even boot after that. Then I couldnt recharge the battery for some odd reason, and the update didnt want to install, So i had my old BROKEN ZEN MICRO which has the same EXACT PROBLEM, anyways, I took that battery and used it cause it charged unlike the ZEN MICRO PHOTO Battery. After that, then I installed the update, but then it gave me that problem of Update failed, so here i am now...

Nomad Jukebox Zen Xtra FIRMWARE PROBL

In the spring of 2005, I bought a 40GB Nomad Jukebox Sen Xtra. It worked for a little over a month without any problems. Since then, it shuts off on its own and?it freezes. For the first time since I bought it, I attempted to load new music onto it. Now whenever I turn it on, it reads "re-building library..." and then it's stuck on "Firmware Problem."? I tried updating?the firmware from the website, but since?my computer no longer recognizes that?the player is?plugged in.
?I welcome any suggestions for this problem. Please help me so I can stop regretting my decision to buy this...

Kayla24?Looks like you're going to have to start regretting buying something?made by?Creative. There are oodles of stories on these boards regarding software problems and creative mp3 players. Creative have published ?'updates' that effecti'vely disable players but will not take any action unless the machine is still under warranty. The last e-mail I got from tech support said 'We know the firmware [update] disabled your machine, but unless it is still in warranty there is nothing we will do about it."? It was a Zen Xtra 30GB, it's now a paperweight. If your's still turns on, try reinstalling the firmware on a old pc/laptop that has never had Windows Media on it, but has been updated to media player 0. This sometimes works - otherwise join the crowds and get an i-pod. At least they work - and Apple fix 'em when they break 'em.

Nomad jukebox zen xtra firmware quest

Hello all,
happy to be on the boards. I have a few questions I would like to ask:
) what product do I have? on the front it says "nomad jukebox zen xtra" with 40gb on the side. is it a "zen xtra" or a "nomad jukebox"? I was trying to find updated firmware, but found both "zen xtra" and "nomad jukebox" on the creative site.
2) i've read horror stories of firmware 2..03. is there newer or firmware that works?
3) is there a way to treat this player as a regular hard dri've? as in when I plug it into Windows/Linux (Debian linux), it will be recognized as a regular hard dri've without much trouble?
Thanks all!

Oo
ps.
I didn't mean to take the hard dri've out and use it as a computer hard dri've. I meant: is there a way (maybe changing firmware?) to make the creative plug and play with windows without installing drivers?
An example: I want to go to a friend's house, plug my creative in, and copy a 5gb ISO off his computer. This is assuming he doesn't have the creative drivers.
I read that the 2..03 (or whatever the bad one is called) is supposed to allow this. Any solutions?

Creative Zen Xtra Firmware Upgrade Problems v1

While trying to upgrade the firmware on my Creative Nomad Jukebox Zen Xtra, there was a problem with the upgrade. I'm now stuck in rescue mode v.3. When I plug the MP3 player into the computer, Windows will recognize it and asks me what to do. I exit that window and try to run the firmware update again. The firmware program tells me "Your player is not connected, please connect your player."? there are 2 options "Upgrade" and "close". Upgrade is greyed out, but close is clickable. I've tried
1. clean up,
2. format all,
3. reload OS and
4. Reboot.
None of those options seems to do me any good. I've uninstalled all the Creative software from my computer, but still no luck. Please help me. I'm doing my best to avoid having to go buy an iPod, but if I can't get my Creative Mp3 player to work, I guess I will have to. I have spent a lot of money between cables, the docking station and the leather case. I'd hate for all this to be wasted, so please help me.
I've tried to "reload the OS" and then clicked on the language the moment the Player told me to start the update. Someone please shed some light on this for me. I've tried email Customer Support. I've searched Google. I've put my best skills on it and of course I've scoured this website to no prevail. Someone help me out.

READ ALL BEFORE PROCEEDING You do need to install the driver. http://support.creative.com/Products...e=MP3+Players# When you get to the page for your player bottom left the manual selection choose Xp & clik submit the driver should be the first one version 2.0.00 .After the driver is installed when you plug in the player check in device manager to see that it shows up there Start>Control Panel> System>Hardware>Device Manager look under Portable Devices or for the name of the player. Use a rear USB Port to assure a good connection. Then run the firmware file on the computer ,choose reload firmware or Os on the player,choose language when player asks for update(the pop-up from windows indicating that it "sees" the device DO NOT CLOSE IT.)

Latest Zen Xtra Firmware Makes MP3s Without Full Tags Worthless

I recently loaded my Zen Xtra with the latest firmware and after two days of troubleshooting found that it now refuses to play MP3s with less than full tags using the "Play Any Track" mode which since I have over 000 songs is the only way to go... All my MP3s are tagged simply with Artist - Song and I never put any of the extra junk like Genre or Album names in. I had to add dummy info just to get the Xtra to recognize these MP3s... I'm using WMP since?the NOMAD Explorer no longer works.Message Edited by stevcoll on 2-2-200609:27 AM

You won't believe but I had the same problem just couple of days ago with the same player (but 40 gigs). I was confused just like you, so I tried to format the disk again (while connected to PC) and reloaded the OS. Then a message appeared like 'Now you can update your firmware' or something like that, so I ran the firmware from PC, and no message about a battery level appeared, and the firmware was updated correctly. Try it, and let me know if it's OK! Good luck!

HILFE......Creative Zen Xtra Firmware Prob

Hallo, leider kann ich nicht englisch, aber meine Hoffnung ist, dass hier jemand deutsch versteht und ich hier Hilfe bekomme. Ich habe mir einen MP3 Player gekauft. Und zwar einen
Creative Zen Xtra 30 GB.
Da ich dachte, dass der Player mit neuer Firmware noch besser funktionieren w rde, habe ich versucht die Firmware 2.0.3.0 zu installieren.
Aber w hrend dem Installieren gab es einen Stromausfall und jetzt geht gar nichts mehr. Jetzt meldet der Player immer: Firmware Problem.
Wenn ich auf Arbeitsplatz gehe, ist der Player aufgef hrt. Aber wenn ich die neue Firmware laden will, erscheint immer: Player nicht angeschlossen.
Ich habe es mit Media Player 9 und 0 und probiert, mit dem gleichen Resultat.
Auf dem Arbeitsplatz erscheint der Player als Nomad Jukebox Zen Xtra. Wenn ich ihn dann durch Doppelklick ffne, erscheint Storage Media und darunter steht 20.0 MB frei von 20.0 MB.
Ich bin eine Hausfrau und habe nicht besonders viel Ahnung von all diesen Dingen. Ich m chte nur, dass mein Player wieder funktioniert und ich meine Musik und meine H rb cher wieder h ren kann.
Bitte, bitte, kann mir jemand helfen
F r eure Hilfe jetzt schon ein grosses DANKE.
Gruss Annemarie
Message Edited by Annemarie on -2-200702:49 PM

German to english translation using babel fish translation
Deutsch-Englisches bersetzung Verwenden bersetzung babel fish
unfortunately I know hello not English, but my hope is that someone understands here German and I get assistance here. I bought a MP3 Player. A Creative Zen Xtra 30 GB. Since I thought that the Player with new firmware would work still better, had I tries the firmware 2.0.3.0 to install. But during installing there was a power failure and goes now nothing at all more. Now the Player always announces: Firmware problem. If I go on job, the Player is specified. But if I the new firmware to load wants, always appears: Player not attached. I tried it with Media Player 9 and 0 and , with the same result. On the job the Player appears as Nomad Jukebox Zen Xtra. If I it then through doubleclick open, STORAGE appears Media and among them 20,0 MT stand freely from 20.0 MT. I am a housewife and have not particularly much notion of all these things. I would like only the fact that my Player again functioned and I mean music and again can hear my hearing books. Please, please, someone can help me For your assistance now already a large THANKS.
the firmware update only works using Windows XP.
Go to the control panel, then add remove programmes
remove windows media player , then re-start your computer
remove windows media player runtim and re-start your computper
remove all creative software from your computer, and re start your computer
Translation bersetzung
die Arbeiten des Mikroprogrammaufstellungupdates nur mit Windows.xp.
Gehen Sie zur Steuerverkleidung, f gen Sie dann entfernen Programme entfernen Fenstermittelspieler , wiederbeginnen dann Ihren Computer entfernen Fenstermittelspieler runtim und wiederbeginnen Ihr computper entfernen alle kreati've Software von Ihrem Computer hinzu, und Re stellen Ihren Computer an
downloaden Sie die playsforsure Software von der creative Web site, und bringen Sie es an
versuchen Sie das Mikroprogrammaufstellungupdate noch einmal
Aufmerksamkeit! Sobald Sie das Mikroprogrammaufstellungupdate (2.0.3) beginnen, das alles aus Ihrem Spieler gel scht wird, wenn Sie havent eine Kopie auf Ihrem Computer erhielten, sollten Sie versuchen und fr here Mikroprogrammaufstellungversion, die mit beginnt. wenn dieses doesnt owkr dann Sie verwenden mu , verbessern die 2.0.3.0 Mikroprogrammaufstellung als oben.
Hoope I verstehen Sie dieses, wie es auf dem Internet bersetzt wurde http://babelfish.altavista.digital.com/tr

Firmware update fail

Hi, i have a Zen Xtra and i try to update firmware but the program told me "Please ensure that your batteries are insterted before you proceed".....But are inserted, I'm sure!!! so what can i do?
Thanks!

hi, the power adapter is connect but the warning message still appears and i can't do the firmware upgrade. i think that the battery is discharge
Thanks a lot.

Zen Micro Firmware update - Now can't transfer W

I loaded my WMA files to my new ZEN MICRO 4Gb player... Then I signed up for Napster to Go...Said I need a firmware update...did the update...Had reload again...but, now all my transfers of WMA files fail! MP3 files work fine...Anyone have the issue before?

Ever since I upgraded the firmware for the micro, I have been unable to transfer WMAs via Media Player v0 or Creative MediaSource. The error I receive is "An error has occurred while transferring this file". This only occurs on WMAs. MP3s transfer fine.

Zen Xtra firmware update fail

Similar Messages

Maybe you are looking for