Needs Steps to carry out packing in PP process.
Hi Friends,
I need to know the step wise procedure ( With Tcodes) to pack the material which is produced in PP process (process order) and this should result in generation of handling units.
I also would like to know any prerequisite configuration to be done for this?
Regards,
Amrish Purohit
Hi Friends,
Thanks for the efforts. I am very well aware about the Packing process in SD cycle.
What I was looking for is" Needs Steps to carry out packing in PP process"
Which I have found out
Thanks for your time though.
Regards,
Amrish Purohit
Similar Messages
-
Need steps to find out the particular ( specific ) incoming IDOC.
Dear ALL Experts,
In our scenario , our SAP XI system is directly connected to customer SAP XI system and we did not import IDOC from R/3 to SAP XI. Instead of doing this we got the .XSD file and imported to SAP XI.
Now, I need to know the particular incoming IDOC through IDOC NO or some other way where, as of now I need to run the
sxmb_moni and from that I need check every IDOC.
Pls revert with the way where we can retrieve the specific IDOC.
Thanks and Regards
Machindra Patade> pls guide how to check whether TREX have installled or not in our system ?
You can apply a simple trick here to make suer if TREX has been installed or not.
Go to RWB--->Message Monitoring, press Display button. Now in next screen you can see a input box "Search Text". Enter some value in the search text box (which you know is present in the system) and now press Start button after fill other filter criteria. So if you get some result then it means TREX is present in the system else not.
> Also suggest if there is any way out to know the specific IDOC/XML message.
In XI use transaction code IDX5 to search IDOC.
Regards,
Sarvesh -
Steps to carry out material mass maintainence MM17
Please can someone guide me about all the steps involved in MM17 for a material mass change.
SamHi Sam,
In Tcode MM17:- Select table , Execute, Select material, select Data records to Be change tabExecute-
Select the Fields which you want to change.
system shows the old value and fields for new value.
System shows old value only when that was maintained previously.
If you did not mainained that fields then system did not show you old value.
Rewards if Useful
Regards
Shawn -
Carrying out physical inventory count for Consignment stock.
Hello,
Can you please tell me what are the steps for carrying out physical inventory count for Consignment stock provided by vendor?
Sincerely,
KetanHI
IN MI01,, select the special stock indicater,, then PI will be created for consignment stock also.
regards,
sudhakar -
Hello Experts,
We are transferring internet sales orders from CRM to R/3. Now, what I need to do is
to trigger the 'carry out new pricing' for all the line items. Just like when we click
the update button in the conditions tab and click on the 'carry new pricing' option even though
user only displays the sales order in R/3.
Hope you can help me guys. Thank you and take care!No Answer...
-
What would be the steps needed to upgrade OIM, connector pack
we are planning to upgrade OIM 9.0.3 to 9.1 . So what are the steps that need to be followed?
I also wanted to know how take backup of connector pack ??? Also the steps to upgrade connector pack???
Version Correctedwe are planning to upgrade OIM 9.0.3 to 9.1 . So what are the steps that need to be followed?
I also wanted to know how take backup of connector pack ??? Also the steps to upgrade connector pack??? -
My fonts are changing in iWed after I publish. I need step by step instructions on how to go to my third party server and clear out all of my files and reload my whole website, the solution I saw posted by another. Please someone help me on this. Urgent
If your fonts are changing when viewed on other computers - epecially those running windows - you need to look at using web-safe fonts...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html
Also make sure you clear your browser cache before viewing you published files. -
Need to automate blocking a set of users from carrying out any activity...
We want to block a set of users from carrying out any activity in SAP everymorning between 05:00 to 10:00.
The users should be blocked at 05:00am and unblocked at 10:00am.
The blocking and unblocking should happen automatically.
Request any solutions to achieve this.
Thanks in advance,
Amit PrayagHi Amit
Please check the below link
http://www.sap-img.com/basis/different-methods-to-lock-or-unlock-sap-users.htm
Thanks and Regards
Debdeep -
Realignment showing multilevel error propagation carried out and
While executing realignment table it is showing following :-
Realignment showing multilevel error propagation carried out
Realignment of live cache time series aborted
Have seen all consistency checks and everything is fine no alerts received.
Please suggest
vikasHi Vikas,
I am assuming that you have maintained the Realignment table properly meaning you have only the necessary entries and removed all unwanted entries. Having assumed that the other reason why this error can come up is when you try to realign more than 1 Characteristic Value in the same table entry.
For Example.
Let us you have 3 Characterstics viz, product, location,customer.
If for Product P1, you are trying to change the location from L1 to L2 and customer from C1 to C2 then there is a possibility such an error might occure.
In such cases we need to create 2 entries as follows
1) P1 L1 C1 to P1 L2 C1
2) P1 L2 C1 to P1 L2 C2.
It is better to avoid Multiple characteristic changes in a single step.
Hope this helps.
Thanks
Mani -
F110 - Automatic email to vendor when payment run is carried out
Hi,
I am trying to configure automatic emails to be sent to vendor when automatic payment run is carried out.
Please note that i have already carried out the following settings:
Step 1- Define Std communication method as SMTP (Internet mail) in vendor master
Step 2 Maintain email address via FK02.
Step 3 - T-Code BERP Code to find Find event 00002040 This is a Function called SAMPLE_PROCESS_00002040, copy with another name i.e. ZSAMPLE_PROCESS_00002040
Step 4 T-Code FIBF -> Option -> Product ->a Customer, Write product name at your choice (for example ZMAIL) and make it active.
Step 5 T-Code FIBIF -> Option ->Process Function (or Module) ->. A Customer.
Process = 00002040
Module Function = ZSAMPLE_PROCESS_00002040
Product = ZMAIL (name of product define by you in step 4)
it will automatically send mail to vendor provided SCOT is configured.
However, when i carry out the payment run, email is not generated..
Can someone please help me out with the above?
Thanks in advanceAndi,
this might help....
Emailing SAP Remittance advice:
1.
For the following process to work SAP Connect needs to be configured for outgoing mail. This is carried out by the Basis team. The t-code is SCOT.
2.
<b>Vendor Master Data</b>
Define Std communication method as SMTP (Internet mail) and maintain an email address in the vendor master data.
3.
<b>T-Code BERP</b> Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
4.
Use t-code FIBF to create the enhancement.
a)
Create a product.
A product groups together customer enhancements to BTEs developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
Create the product name (for example ZMAIL) and make it active.
FIBF->Settings->Products-> of a Customer
b)
Assign the BTE to the FM:
Settings->Process Modules-> of a customer
Assign the 00002040 process to the FM and Product.
5.
At the end of this process when the payment advice program is run, the event will be called and it will automatically send an email to the vendor.
6.
Assign an email address to the sap user who will be the outgoing accounting clerk. Define the Accounting Clerk for the outgoing email address:
SPRO->FI->AR/AP->Vendor Accounts->Master Data->Preparations for Creating Vendor Master Data->Define Accounting Clerks
hope it helps. -
Division cannot be carried out because divisor is zero - EA00
hi,
While doing EA00 transaction following error occurs:
During billing simulation, a termination occurs with message AJ020 (Division cannot be carried out because divisor is zero) or AJ097 (Unexpected termination in variant &1 in schema &2)
I gone through the note 402960
Note says, The termination can occur, for example, when
1) you choose pushbutton "Overall check" on the move-in screen,
2) the move-out date of a contract is equal to the move-in date,
3) one-day time slices are to be billed
The overall check in the move-in is called with a one-day time slice.That is, the move-in date is selected as the to-date.
Solution
Correct your billing schema.
Use IF nestings to make sure that only schema steps, which can also be executed with zero values, are executed. For example,a division by zero should be avoided.
My problem is I did not understood what exactly has to change in schema.pls help???
Regards,
ChetanCan you mention the variant Program you are using on this step. The Divisor operand value seems to have become zero. You may need to check how this operand value is being populated.
-
3rd party dropshipment carried out by more than one 3rd party vendor
Hi
I am wondering if the following is possible in standard SAP on a third party drop shipment scenario..
I would like 1200pcs quantity to split up into 3 different shipments (each shipment = 400pcs) and drop ship by three different 3rd party vendors (ie. Vendor A, B, C).
Is this possible in standard SAP?
In another word, if the standard SAP is able to carried out this business in the system, will the three PO being able to be tracked by the SO?
If it is possible, how do I perform this in the SAP system via ME57?
Thanks
YYHi Yong Yeow Ching
Yes, it is possible but you need to have 3 PIR's with each vendor and also need to have 3 lines in Source list but w/o any tick for fixed vendor. Here are the steps:
Create TAS Sales order 1200 Qty--> It will create a Preq with 1200 Qty and delivery address of customer>When Buyer will convert that PReq to PO using ME57 system will give you a pop up message showing all the three vendors , buyer needs to select one supplier and change the qty accordngly in PO-> same steps needs to repeated 3 times using same Preq.
Regards
Yogesh -
Not all storage bins in LX16 transaction Carry Out continous inventory
Hello,
I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
Can somebody help us??
Thanks in advancehi
LX16 transaction is only for " Continious Physical inventory Counting Only"
LX03 is for bin status Report
Take Continuous Inventory
Purpose
With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
Prerequisites
Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
Process Flow
To run a continuous inventory, you need to complete the following steps in the order displayed:
Plan the inventory by selecting storage bins, for which you want to take inventory.
Create the system inventory record
Activate the system inventory record
Print the warehouse inventory list.
Take physical inventory in the warehouse.
Enter the inventory results
Close the inventory
Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
hope this helps to solve your issue
regards
KKY -
How to carry out / trigger defined substitution
Hello,
Can you tell me why I can not carry out the substitution, which is defined as following:
Tcode: OPSN
Applicatn area PS Project System
Callup point 1120 Network activity
Prerequisite: AFVGD-STEUS = 'PS01'
So when I change the some user fields of the (internal) activity in a project, when I save the project, the substition is not carried out, can you tell me what else I need to implement the trigger of substitution.
Thanks a lot!
JingDear,
For first Query:
1) Create a value assignment type with type u201CAu201D Node with class with all the tick marks for activate indicator a
Path: SPRO>>Environment, Health and Safety >> Basic Data and Tools >> Specification management >> Specification Data Base Structure >> Settings for value Assignment >> Specify value Assignment Types.
Here you will find total value assignment Types available in the system.
Double click on the value assignemnt type, which you would like to change.
In this screen you need to select the value ***. Category as "A". after selecting the category "A" you need to enter the class in the column class(valAss.). Select the last 2 check boxes (New VA Active & Change Active) out of six.
If you want to create a new one go to "new entries" and follow the steps mentioned above.
For second Query:
2) Run Table based value assignment creation make sure the check edit is ticked ok
Once the updations or changes happened in the value assignments, you need to do this activity.
Path: SPRO>>Environment, Health and Safety >> Basic Data and Tools >> Specification management >> Specification Data Base Structure >> Settings for value Assignment >> Set Up Table-Based Value Assignment
Here you will find 2 rows
1. Create Entries for the Value Assignments
2. Set Up Table-Based Value Assignment
You need to select "Create Entries for the Value Assignments" first
double click on this. You will find a execution button. execute it.
system asks "Do you really want to change value assignment type entries?"
click on "Yes".
system updates the information in the value assignment tables, what ever you did the updates in value assignment types.
you will find the message of "number of new entries and number of entries deleted"
Go back...........you will find the activity performed tick mark.
you have to do the same thing in the second line "Set Up Table-Based Value Assignment". Here execution is not required.
Kamal -
Carry out period-end closing for material .... in the previous period
Dear Experts,
Currently we are performing Month-end Closing for period May 2011.
We got any error messages during Actual Costing Closing in Material Ledger.
Based on our investigation, system encounters that any materials has not been carried out Period Closing in the previous period.
In accordance with SAP Note 361236, we should perform this workaround starting from Single-level Price Determination until Reversing Closing Entries.
Assuming that this is the right SAP Note to resolve this issue, kindly advice the following items as follow:
u2022 Should we perform this workaround using the Latest Costing Run that is May 2011, since the period of April 2011 is CLOSED (OB52 and OKP1) ?
u2022 Should we perform the full steps in this workaround ( from Single-level Price Determination until Reversing Closing Entries ) with u2018MUST_xxxxxu2019 execution firstly and subsequently re-run this steps without u2018MUST_xxxxxu2019 execution ?
u2022 What is the impact of Reversing Closing Entries in our Financial Statement in period of April and May 2011?
u2022 Is there any other SAP Note for fixing the problem?
Thanks for your kind attention.
Regards,
(Vincent)Hi Vincent,
You have not mentioned whether the issue is for few materials/plants or all materials/plants.
Find my reply to your queries:
u2022 Should we perform this workaround using the Latest Costing Run that is May 2011, since the period of April 2011 is CLOSED (OB52 and OKP1) ?
You will not be able to run ACR (for the materials/plants) only May 2011 without closing the status for April 2011.
u2022 Should we perform the full steps in this workaround ( from Single-level Price Determination until Reversing Closing Entries ) with u2018MUST_xxxxxu2019 execution firstly and subsequently re-run this steps without u2018MUST_xxxxxu2019 execution ?
If you want to run Actual Costing Run (ACR) for latest previous month (May 2011) and do not want to run ACR for previous months (Apr, Mar, etc.), you still need to close the status of materials by using must close.
1st you reverse ACR for May 2011. Then use must close for April month. Perform the full steps of ACR for May 2011.
You may encouter a issue (quantities and values are inconsisitant) for the materials which are having price varinances, etc. in Mar/Apr months. To resolve this issue you can follow with SAP support partner (service.sap.com).
u2022 What is the impact of Reversing Closing Entries in our Financial Statement in period of April and May 2011?
The imact of reversing entries in April and May is depend on the Single/Multi level price variances of Materials bcz after the reversal of closing entries you need to run the full steps of ACR. If your client is not interested to take impact in April, the better way is use must close for April and re-run ACR for May 2011.
u2022 Is there any other SAP Note for fixing the problem?
We also had similar issues but it was for few materials. We have used the above option. Had a issue (quantities and values are inconsisitant). Raised OSS message and resolved the issue.
Hope the above details may help you to resolve your issue.
Regards,
ADI
Maybe you are looking for
-
500 Internal Server Error for Team under MSS SAP portal !!!
Dear Experts, I'm trying to access Team under MSS from Portal, It throughs 500 Internal server Error as shown below. we are running EP 7.3. 500 Internal Server Error The initial exception that caused the request to fail, was: Java.lang.IllegalArgum
-
I was trying to install the SEOQuake add on. After clicking install Firefox would hang up saying the script had timed out and asking if I want to stop it or continue. Didn't matter which option I chose nothing would happen. The only way to stop it wa
-
hi i want to find the oldest SR date. Which view in report is best suit for that? regards sowm
-
Crazy Question: Could you run FCS2 on a Macbook Air?
Looking at minimum system requirements for FCS2, and the specs on the macbook Air, I was wondering... would it be possible to run FCS on an Air? From a practicality perspective probably not the most sensible thing to do, but would it work? The only t
-
Replacing the plastic cap on the magsafe power adapter
I really love the tiny plastic caps that Apple sticks on top of the magsafe power adaptors, but alas! I finally lost mine today and am wondering where I can find a replacement (or two, or three). I have had no luck searching online for a solution. Pl