XL reporter error occurred while executing report! Rows: 25203 Columns: 30

An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny

Similar Messages

Error occurred while Executing XL report

Hi,
I am getting the following error when i generate the XL report
<b>An error occurred while Executing report!
Description: Can't show non-modal form when modal form is displayed</b>
Regards,
Aravindhan.R

Hi!
You are probably editing a cell, if you exit the cell you are standing in (editing) the report should run properly

Unable to view settings tab in one GPO. "An error occurred while generating report: Object reference not set to an instance of an object."

I am the owner of this GPO and I can view the settings tab in any other GPO. But, I get the following message when I try to view the settings tab in one particular GPO:
An error occurred while generating report:
Object reference not set to an instance of an object.
Other posts I look at reference the same error, but with different circumstances, and thus, they specify that the hotfix is for to fix the error under
those circumstances.
I'm accessing GPMC on a Win 7 SP1 machine. DC is Server 2012 Standard.

> Since I have to go through Edit to see the settings, and peruse the
> entire massive folder of settings to try to identify the bad one, it has
> been slow-going and I haven't found it yet.
You can filter ADM templates to show configured ones only, and you can
use the "show all settings" node. This will speed the work up - a little
bit at least :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

GPM Custom GPO-Settings: An error occurred while generating report: Object reference not set to an instance of an object.

Hello,
As you can tell from the title of this question, I am no expert with GPO's. Before I begin, I spent a few minutes to an hour searching and reading in hopes of finding the solution and avoid putting myself out there as a "GPO Newb". While
I found several posts and answers that were similar and were related, the questions and answers were more advanced and did present the solutions providing the person had initial knowledge already. That is not necessarily my case and I would ask for a
little patience and a bit of 'hand-holding' for what I need.
I run SBS 2011, and in Group Policy Management I have a custom GPO. In this GPO I define all my settings. I understand this may not be the best or most practical method of applying policies, but I am not very strict and have few settings. This
policy existed prior to my joining the company, and was migrated in to this SBS '11 from SBS '03. That may be the issue, but before making any changes I am seeking expert advice.
When I select that GPO, named "Main GPO", and click on the tab at the top "Settings" I see the error: "An error occurred while generating report: Object reference not set to an instance of an object."
I saw that when I right click the GPO > View > Options and select the tab "Reporting" that it states that for reporting to work the location of the .adm files must be specified. I see that my option for the location is set to "Default"
which by my guessing would be located in the C:\Windows\sysvol directory. Below is what I see there:
C:\Windows\sysvol\domain
C:\Windows\sysvol\staging
C:\Windows\sysvol\staging areas
C:\Windows\sysvol\sysvol
I think the problem is that my custom GPO are not inside the default location, which I speculate is: C:\Windows\sysvol\domain\policies (which I do see some objects there).
But instead I also see items in this folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just typed 'JOHN.LOCAL' is my actual local domain).
To further this, when I edit that custom GPO, then at the very top of the tree I right click on it and select Properties, I see a Unique Name listed there as a long string of numbers and letters, similar to a registry entry. I searched my server for
that same Unique Name and found it listed inside the folder: C:\Windows\sysvol\domain\policies
If I am correct with my assumption and basic knowledge, I should move all objects as follows:
-Move FROM: C:\Windows\sysvol\domain\policies
-Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
My concerns are that I am not correct at all, that I will break something, that there may be an easier fix than moving anything, or that I am overlooking something causing this error altogether.
Thank you for anyone's help and time with assisting me with this request.
John Fester

> top "Settings" I see the error: "An error occurred while generating
> report: Object reference not set to an instance of an object."
That's due to a security setting (most possibly) your current OS does
not understand. Hard to find out wich exact setting it is... To resolve
this issue, we need the gtpptmpl.inf file residing in the policiy's
sysvol folder. To open this folder, edit the policy, move to computer
settings - policies - windows settings - scripts - startup, press "show
files". Then move two folders upwards and back down to
.\microsoft\windows nt\secedit. There you'll see the gpttmpl.inf - post
its contents and we'll have a look at it.
> location, which I speculate is: C:\Windows\sysvol\domain\policies (which
> folder: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies (while where I just
That's perfectly ok - JOHN.LOCAL in fact is a symlink pointing to "domain".
> all objects as follows:
> -Move FROM: C:\Windows\sysvol\domain\policies
> -Move TO: C:\Windows\sysvol\sysvol\JOHN.LOCAL\policies
No.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

ODBC error occurred while executing SQLExtendedFetch to retrieve the result

Good morning everyone,
I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
It's taking around 2,5 minutes to run, then it give that error message.
Has anyone got any ideas on where I should get started?
Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

Damon,
you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
regarding performance
In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David Baur

I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur

An unknown error occurred while executing the PowerShell script:

Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name:      Microsoft-Windows-PowerShell/Operational
Source:        Microsoft-Windows-PowerShell
Date:          4/9/2015 3:27:04 PM
Event ID:      4100
Task Category: Executing Pipeline
Level:         Warning
Keywords:      None
User:          mmmmmm\paufra
Computer:      tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
    <EventID>4100</EventID>
    <Version>1</Version>
    <Level>3</Level>
    <Task>106</Task>
    <Opcode>19</Opcode>
    <Keywords>0x0</Keywords>
    <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
    <EventRecordID>285</EventRecordID>
    <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
    <Execution ProcessID="2344" ThreadID="4076" />
    <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
    <Computer>tools-francis.mmmmmm.com</Computer>
    <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
    <Data Name="ContextInfo">        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
</Data>
    <Data Name="UserData">
    </Data>
    <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>

Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?

I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 ===

An error occurred while executing a custom action:_PopulateUserRoles

I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert

Error occured while executing Matlab script

Hello!
I want to run a Matlab script under LabVIEW, but there is always
a error message which says "Error occured while executing script".
Should I install Matlab on the same computer at first? if yes, do
I need to configure Matlab under LabVIEW?
Thanks!
Le

Yes No
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

Error: An error occurred while skipping data rows

I am constantly getting error message “Error: An error occurred while skipping data rows”. Here is my scenario:
I am pulling data from a text flat file which is Vertical Bar {|} delimited. My data source files naturally come without headers (no column names on first row). So what I did to bypass
this is –
I used a control file to supply the header names when I developed my package. This control file’s column names have corresponding column order used in the data source files.
I then added an expression to my Flat File Connection Manager so that the system should automatically pick up new incoming files (files without headers).
Now when I try to run my package I am receiving “Error: An error occurred while skipping data rows”. Could this be due to the fact that the system is expecting the column names which I
entered when I developed the package while this new file does not have any headers, or could it be something different? There is very little information on the internet about this kind of error message. The only meaningful information that I have found is
from the link below but unfortunately the case explained there is not the same as my situation.
http://social.msdn.microsoft.com/forums/sqlserver/en-US/a790460b-9ef5-482b-b219-f55c05fa30d3/error-occured-while-skipping-data-rows
I’m also aware that one can get the same error if the specified delimiter type on their package is different from the one on the flat file. Still that is not the case in my situation. Can
someone please kindly help me troubleshoot this.
Many thanks,
Mpumelelo

I have managed to address my problem. I did not have to manually enter some nearly 2000 column names by hand. Here is what I have done. I will explain it in detail for the benefit of those who might face the same problem but have no answers on how to work
around it.
I have maintained the column names from the control file because it was important for me to do this in the interest of some data flow components further down the pipeline. It therefore means that my package Flat File Source components have column names
on both the External Column and Output Column sides.
When I configured the Flat Files Source component using the control file I left the option “Column names in the first row” ticked as shown in the picture below. This is the default selection from Microsoft.
I then went to my flat file connection manager; right clicked it and selected “Properties” to get something like shown below. You will notice that property “ColumnNamesInFirstRow” is down as “True” because when configuring my flat file manager I left
that selection ticked. To address my problem I changed property “ColumnNamesInFirstRow” from “True” to “False” and saved my package. This means that during runtime the package will not use the first row as column names but will use the already predefined
column names which I entered from the control file. Please note that selecting the option of not using the first row as column names should be done from the Properties selection instead of the Flat File Source component. Changing this property from the Flat
File Source component automatically changes all the metadata whereas doing this from the Properties selection leaves the metadata on the Flat File Source component unchanged.
Mpumelelo

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

Error occurred while getting reports on Blackberry.

We are using BO4.0 mobile service. When I open some Crystal reports in my blackberry I got an error:
u201CAninternal server error occurred while processing the client request. (MOB00082)u201D .
I also noticed,
1. reports which directly connect to the database using sql command are working fine.
2. for some reports having saved data, it could open fine, but if I try torefresh the parameters and get report again error will occur.
3. the webi reports have the same issue.
please help
the following appeared in the logging (Mobi_VMSServer_XX...XX_trace.glf)
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key 42085_code
     at java.util.ResourceBundle.getObject(ResourceBundle.java:384)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:381)
     at java.util.ResourceBundle.getString(ResourceBundle.java:344)
     at com.businessobjects.foundation.exception.ExceptionWorker.initErrorCode(ExceptionWorker.java:415)
     at com.businessobjects.foundation.exception.ExceptionWorker.<init>(ExceptionWorker.java:131)
     at com.businessobjects.foundation.exception.CheckedException.<init>(CheckedException.java:73)
     at com.crystaldecisions.celib.exception.CEException.<init>(CEException.java:98)
     at com.crystaldecisions.celib.exception.AbstractException.<init>(AbstractException.java:87)
     at com.crystaldecisions.sdk.exception.SDKException.<init>(SDKException.java:156)
     at com.crystaldecisions.sdk.exception.SDKException$PageServerError.<init>(SDKException.java:1025)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.PageServerError.GetErrorMessage(PageServerError.java:76)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.SendRequestHelper.sendRequest(SendRequestHelper.java:67)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.CacheReportSource.sendRequest(CacheReportSource.java:1523)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.CacheReportSource.getPage(CacheReportSource.java:1036)
     at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalTranslator.getPage(Unknown Source)
     at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalPage.loadCrystalPage(Unknown Source)
     at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalPage.<init>(Unknown Source)
     at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalReport.getPrivatePageByNumber(Unknown Source)
     at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalReport.getPageByNumber(Unknown Source)
     at com.businessobjects.mobilebi.server.commands.impl.GetReportPageCommand.execute(Unknown Source)
     at com.businessobjects.mobilebi.server.commands.impl.dispatch.PropertyFileCommandDispatcher.dispatchMessage(Unknown Source)
     at com.businessobjects.mobilebi.server.connector.MessageHandler.received(Unknown Source)
     at com.vaultus.common.core.bl.comm.CMSessionReceiveEvent.dispatchInternal(CMSessionReceiveEvent.java:34)
     at com.vaultus.common.core.bl.comm.CMSessionDispatchableEvent.dispatch(CMSessionDispatchableEvent.java:91)
     at com.vaultus.server.core.CMMessageTask.runInContext(CMMessageTask.java:60)
     at com.vaultus.server.core.JobTask.run(JobTask.java:75)
     at com.vaultus.server.core.concurrent.Task.run(Task.java:118)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)
|49988AEBC37C4723ADE0F9D989CB5110fe30|2011 11 22 09:14:14.897|-0500|>=|W| |Mobi_VMSServer| 7404| 450|Job-74          | ||||||||||||||||||||VMS_SERVER.VDSC_DRIVER_MobileBIConnector||Returning an error to the client. Details:
java.lang.RuntimeException: Information is needed before this report can be processed.
     at com.businessobjects.mobilebi.server.crystaltranslator.ps.CrystalReport.getPageByNumber(Unknown Source)
     at com.businessobjects.mobilebi.server.commands.impl.GetReportPageCommand.execute(Unknown Source)
     at com.businessobjects.mobilebi.server.commands.impl.dispatch.PropertyFileCommandDispatcher.dispatchMessage(Unknown Source)
     at com.businessobjects.mobilebi.server.connector.MessageHandler.received(Unknown Source)
     at com.vaultus.common.core.bl.comm.CMSessionReceiveEvent.dispatchInternal(CMSessionReceiveEvent.java:34)
     at com.vaultus.common.core.bl.comm.CMSessionDispatchableEvent.dispatch(CMSessionDispatchableEvent.java:91)
     at com.vaultus.server.core.CMMessageTask.runInContext(CMMessageTask.java:60)
     at com.vaultus.server.core.JobTask.run(JobTask.java:75)
     at com.vaultus.server.core.concurrent.Task.run(Task.java:118)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619)

we re-installed the server but still have the same issue. we also noticed there is another error:
|D7AAE0E1036C45EA94842CAAB137950D0|2011 11 25 08:44:37.480|-0500|>=|W| |Mobi_VMSServer| 1092|8129|Job-43          | |4|0|0|0|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|-|-|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|Cr36auY2UUrBu1kOmdGVKVw3|||||||||com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginSecurityInfo||Bad plugin xml, SI_TOTAL is different from the actual size. SI_TOTAL=11 actual size=10
|D7AAE0E1036C45EA94842CAAB137950D1|2011 11 25 08:44:37.487|-0500|>=|W| |Mobi_VMSServer| 1092|8129|Job-43          | |4|0|0|0|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|-|-|BIPSDK.EnterpriseSession:getService|vtorbodev02:1092:8129.4:1|Cr36auY2UUrBu1kOmdGVKVw3|||||||||com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginSecurityInfo||Bad plugin xml, SI_TOTAL is different from the actual size. SI_TOTAL=11 actual size=10
|D7AAE0E1036C45EA94842CAAB137950D2|2011 11 25 08:44:37.817|-0500|>=|W| |Mobi_VMSServer| 1092|8129|Job-43          | |2|0|0|0|BIPSDK.InfoStore:query|vtorbodev02:1092:8129.7:1|-|-|BIPSDK.InfoStore:query|vtorbodev02:1092:8129.7:1|Cr36auY2UUrBu1kOmdGVKVw6|||||||||com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects||continueUnpack(): plugin not found, type=380
com.crystaldecisions.sdk.exception.SDKException$PluginNotFound: The 380 plug-in does not exist (FWM 02016)
     at com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginMgr.getPluginInterface_aroundBody12(PluginMgr.java:351)
     at com.crystaldecisions.sdk.occa.pluginmgr.internal.PluginMgr.getPluginInterface(PluginMgr.java:1)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpackHelper(InfoObjects.java:544)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.continueUnpack(InfoObjects.java:489)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoObjects.startUnpack(InfoObjects.java:464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1484)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore$XRL3WireStrategy.startUnpackTo(InternalInfoStore.java:1464)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.unpackAll(InternalInfoStore.java:910)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:944)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.queryHelper(InternalInfoStore.java:929)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query_aroundBody24(InternalInfoStore.java:798)
     at com.crystaldecisions.sdk.occa.infostore.internal.InternalInfoStore.query(InternalInfoStore.java:1)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody20(InfoStore.java:175)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query_aroundBody21$advice(InfoStore.java:42)
     at com.crystaldecisions.sdk.occa.infostore.internal.InfoStore.query(InfoStore.java:1)
     at com.businessobjects.mobilebi.server.utils.enterprise.persistence.GenericListOfDocuments.<init>(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionList.<init>(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionListFactory.getListOfDocuments(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionListFactory.getListOfDocuments(Unknown Source)
     at com.businessobjects.mobilebi.server.utils.enterprise.persistence.GenericListOfDocumentsManager.getListForUser(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionManager.<init>(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.EnterpriseSubscriptionManagerFactory.getManager(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.SubscriptionChecker.<init>(Unknown Source)
     at com.businessobjects.mobilebi.server.subscriptions.impl.EnterprisePublisher.startPublishing(Unknown Source)
     at com.businessobjects.mobilebi.server.connector.CredentialsMessageHandler.received(Unknown Source)
     at com.vaultus.common.core.bl.comm.CMSessionReceiveEvent.dispatchInternal(CMSessionReceiveEvent.java:34)
     at com.vaultus.common.core.bl.comm.CMSessionDispatchableEvent.dispatch(CMSessionDispatchableEvent.java:91)
     at com.vaultus.server.core.CMMessageTask.runInContext(CMMessageTask.java:60)
     at com.vaultus.server.core.JobTask.run(JobTask.java:75)
     at com.vaultus.server.core.concurrent.Task.run(Task.java:118)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:619

Following error occurred while executing the application:

I saw the RWB in message monitoring. Message monitoring is not working.
I capture the scrpit.
How can I ? Help me.....
Stack trace for the above error message is:
javax.servlet.ServletException: Error while executing the compilation process: [D:/usr/sap/NSC/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb_mdt/work/jsp_monitor_new1177580597765.java:1446: cannot resolve symbol
symbol : method getMaxMessageNumber ()
location: class com.sap.aii.mdt.util.WebUtil
               jspxth_hbj_listBoxItem_7.setValue(Integer.toString(webUtil.getMaxMessageNumber()));
                                                                                ^
D:/usr/sap/NSC/DVEBMGS01/j2ee/cluster/server0/apps/sap.com/com.sap.xi.rwb/servlet_jsp/rwb_mdt/work/jsp_monitor_new1177580597765.java:1466: cannot resolve symbol
symbol : method getMaxMessageNumber ()
location: class com.sap.aii.mdt.util.WebUtil
                                      if (max == webUtil.getMaxMessageNumber()) {
                                                                             ^
2 errors
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:74)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at jsp_FC_Secure1177408659453._jspService(jsp_FC_Secure1177408659453.java:24)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)

Hi,
From what i can tell youre problem is an a java function (user defined?) getMaxMessageNumber and more specific with a conversion from int to string.
Hope this helps
Dimitris Hagigeorgiou

Error occured while executing root.sh in ORACLE RAC 11gR2 Grid

Environment:
NO of Node: 2
OS Flavor: RHEL 5.3 Tikanga Release 64-Bit
Oracle Grid Version: 11gR2 64-Bit with OCFS2 Configuration
DB RAM: 64 GB
H/W Vendor: CISCO
Shared Partition: /ORASYS (1 TB)
We are trying to install 11gR2 RAC on RHEL 5.3 (64-Bit) box. After successful installation of Gird Software from GUI, I am running oraInst.sh and root.sh from root user. oraInst.sh run fine but when we run root.sh following error encountered while checking the logs.
2011-09-12 22:04:21.996: [ OCRCONF][3915558416]ocrconfig starts...
2011-09-12 22:04:21.996: [ OCRCONF][3915558416]Upgrading OCR data
2011-09-12 22:04:21.997: [ OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 0
2011-09-12 22:04:21.997: [ OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 1
2011-09-12 22:04:21.997: [ OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 2
2011-09-12 22:04:21.997: [ OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 3
2011-09-12 22:04:21.997: [ OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 4
2011-09-12 22:04:21.997: [ OCROSD][3915558416]utread:3: Problem reading buffer 11383000 buflen 4096 retval 0 phy_offset 102400 retry 5
2011-09-12 22:04:21.997: [ OCRRAW][3915558416]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2011-09-12 22:04:21.997: [ OCRRAW][3915558416]proprioini: all disks are not OCR/OLR formatted
2011-09-12 22:04:21.997: [ OCRRAW][3915558416]proprinit: Could not open raw device
2011-09-12 22:04:21.997: [ default][3915558416]a_init:7!: Backend init unsuccessful : [26]
2011-09-12 22:04:21.997: [ OCRCONF][3915558416]Exporting OCR data to [OCRUPGRADEFILE]
2011-09-12 22:04:21.998: [ OCRAPI][3915558416]a_init:7!: Backend init unsuccessful : [33]
** Urgent help is required as my production environment setup/activity is halted due to this.
Thanks in Adv.
Yuvrajsinh Chauhan

./runcluvfy.sh comp ssa -n "vel-kol-db1","vel-kol-db2" -s /ORASYS -verbose
./runcluvfy.sh comp cfs -n "vel-kol-db1","vel-kol-db2" -f ocfs2 -verbose
./runcluvfy.sh comp ssa -n "vel-kol-db1","vel-kol-db2" -s /dev/mapper/360060e80102077c000090010077c000e -verbose
./runcluvfy.sh comp crs -n "vel-kol-db1","vel-kol-db2" -verbose
./runcluvfy.sh comp ocr -n "vel-kol-db1","vel-kol-db2" -verbose
./runcluvfy.sh comp voting -n "vel-kol-db1","vel-kol-db2" -verbose
verify this

XL reporter error occurred while executing report! Rows: 25203 Columns: 30

Similar Messages

Maybe you are looking for