100GB HDD - 'Available' Capacity Issue

Apple forgot to put a disclaimer about the available capacity issue on its 12 inch and 15 inch G4 powerbooks that come loaded with a 100 gig hard drive and 1 gig of ram. Check the outside of your box, it is not on there. I also have a imac G5 and it comes with this disclaimer, as does every other Apple computer. Thinking they solved the available capacity issue, I then opened the box, turned on the computer, went up to the blue apple in the upper left hand corner of the screen, clicked on about this mac, then clicked on more info, then went to the hard drive info, only to find, I had less capacity then I was led to believe I had purchased. Any one out there with this same issue?

MIR --
Thinking they solved the available capacity issue....
There is no "available capacity issue" to be solved. The difference between the stated capacity of your 100GB hard drive and it's actual 93.13GB capacity is simply the result of how drives are marketed. See: http://en.wikipedia.org/wiki/Hard_disk (discussion under the heading "The Difference Between 'Marketing Capacity' and Actual Capacity").
But you already know this, as that's what RD told you just earlier, and what others have told you on five separate occasions in response to your previous five posts on this exact same subject. See:
http://discussions.apple.com/message.jspa?messageID=2031695#2031695
http://discussions.apple.com/message.jspa?messageID=2031671#2031671
http://discussions.apple.com/message.jspa?messageID=2031662#2031662
http://discussions.apple.com/message.jspa?messageID=2031638#2031638
http://discussions.apple.com/message.jspa?messageID=2031594#2031594
Your question's been answered over and over; please stop this senseless clutter. Thanks.

Similar Messages

80GB HDD - 'Available' Capacity Issue

I've just done a complete re-install of OS X Tiger and i have a bit of a Hard Disk capacity issue/question...
I've got an 80GB drive, but when i click 'Get Info' on the HDD icon it says:
Capacity - 74.41 GB
Available - 64.98 GB
Used - 9.42 GB
Am i missing a few GB's there?! I would have thought the Capacity should be 80 GB, with 9.42 GB used leaving me with 70.58... No?
Please note i haven't added any files or programs - it's just pure 'factory condition'.

Am i missing a few GB's there?! I would have thought the Capacity should be 80 GB, with 9.42 GB used leaving me with 70.58... No?
No.
I don't think your hard drive is missing any space.
For example, my 100 GB hard drive shows up in "get info" as having a 93.04 GB capacity.

Workforce planning- issue with available capacity

Hi All,
I have an issue in workforce planning. I have created a workcentre and have entered the required details in capacity tab to arrive at available capacity. The available capacity for this workcentre is visible in transaction CM01.
I have done the workforce palnning using worcentre view in transaction CMP3, but for some reason I am unable to see the workcentre avaliabile capacity. I only see the distributed total requirements.
Would appreciate any pointers on this.
Regards
Pradeesh

Regarding the availablity of CMP3, it refers the availability of assigned persons rather than the work centers.
Please check the involved person with transaction PA30 using infotype 007
(see details in consultant note 543362).
Kind regards,
Zhenbo

FM for checking Available Capacity of Work Center

Dear All,
I have trying to find a Function Module to get the latest available date of the Work Center (The Period where no Production Orders has been dispatched to it). It is only when the Work Center is available then we can dispatch the Production Order's processes to its work center.
Does anybody knows which Function Module or Table where I can get the latest available date for carrying out the Production Order dispatch process. Any inputs would be appreciated.
Thanks in advance.

Dear
Goto CM05/CM07-Select Work Centre Load or Work Centre Basic Load -Enter Work Centre or just give the Plant Code -Hit Standard Profile -It will display you weekly basis Work Centre Avaliable Capacity , Requirement , Load .
It will give you a broad picture over an period -You can select any one the check box representing Weeks or you can change over in Monthly basis .For that you have select Planning -Profile -Option Profile -daily , Monthly , Weekly , yearsly
If you are stick to FM : Help about available capacity
Hope this will address you issue
Regards
JH
Edited by: Jiaul Haque on Oct 11, 2010 10:17 AM

IPad freezing after IOS4.2 - capacity issue?

I had roughly 1GB of available capacity on my 16GB iPad BEFORE installing the 4.2 update. I had a large photo library, mainly photos downloaded directly to the iPad from a digital camera, ie not synced to the iPad from my iMac via iTunes/iPhoto.
Anyone else have these general conditions prior to the install/update? I suspect that the low capacity may play a role here...

My iPad froze on update. I had to eventually kill iTunes (not responding, and not responding to a normal Quit from Activity Monitor). I believe it did not manage to complete the backup cycle. I had to reset my iPad. After about two hours of showing an Apple and an unmoving progress bar, my iPad started working again.
I suspect several things. I had very little disk space left on my Mac mini (~20GB). The Backup folder for my iPad and iPhone exceeded 30GB. Individual backups for iPad were over 13GB. I also had about 5 GB of photos from my camera on my iPad, put there with the camera connector. I suspect that was implicated also, and intend to remove them. However I did have a fair amount of space left on my 64 GB iPad.
Over the next evening I will correct all the capacity issues I can see, and resync my iPad. At the moment, the Video app and the iPod app claim they are cancelling sync, and are not able to be used. iPhoto took a fair while to update photos.I suspect I will find other apps in the same state.

SNP Resource available capacity variance

Hi friends,
need your help??
I am using an SNP resource with capacity 500 min per day(Bucket). but after thew SNP run when i download the optimizer log data( Transaction:/SAPAPO/SNPOPLOG) the available capacity derived from the log is for the particular day is different than the actual capacity of the resource(i.e. it is less than the actual available capacity).
How can be this issue resolved.??
please revert back urgently

Hi kiran ,
Check for the following possible reasons :
Try this resource in SNP Heuristic and check the capacity and do levelling.
Check the Time zone and the calenders for this resource and plant.
Check the overload % and min load % rounding & down times.
See oss note 510339.
Optimizer gives the results based on the settiing you have entered,and you will only be able to analyse it better .
Regds // Digs...

Available capacity in APO

Hi,
I have a resource for which the PLANNED DOWNTIME has been maintained as 12 hrs a day for next few months
On top of it, the FACTORY SHUT DOWN (this has been picked from the fact cal) has been maintained in the CAPACITY PROFILE in APO
Logically speaking I should now see AVILABLE CAPACITY as 12 hrs in the capacity profile in the Resource
But I see sometimes as 12 hrs and some times as 3 hrs in the capacity profile in the Resource
and in the planning book I am seing the available capacity as '0'
Kindly share your interpratation , how do I look into this issue to fix
Thanks,
SS
Edited by: SAPSriman on Dec 7, 2010 8:40 AM

Hi,
First check if the same resource in APO is maintained as external capacity or not.If the same is activated then check the resource capacity in ECC.Check the intervals and shifts.
If the same is not true then check the capacity profiles and the avalable capacity versions maintained in resource master in APO.
Since from factory calender resource blocking is only possible for at least a day so any availble hours is basically for resource blocking.
Check the shift sequence.If your shift sequence is cross period the 3 hours can be coming from previous period.
Hope the points can help you.
regards,
kaushik

Fusion drive capacity issue

Hi,
the strangest thing happened to my iMac regarding the capacity of the hard drive.
In Disk Utility, the capacity is 1.12 Tb, out of which 338.64 Gb are used, leaving 781.7 Gb available. Instead, if I get info on the Macintosh HD, which is the only partition, the available capacity is 330.13 Gb and 310.45 are used. This oddity also appears in the system report, which I pasted below and highlighted in bold.
I am running Maverick OS X 10.9.4 on iMac 21.5-inch, Late 2012 (2.7 Ghz Intel Core i5, RAM 16 Gb)
Any idea about what is going on?
Davide
Macintosh HD:
Available: 19.68 GB (19,682,623,488 bytes)
Capacity: 330.13 GB (330,128,412,672 bytes)
Mount Point: /
File System: Journaled HFS+
Writable: Yes
Ignore Ownership: No
BSD Name: disk2
Volume UUID: CA529F84-5FB1-3B51-B374-000CD6226491
Logical Volume:
Revertible: No
Encrypted: No
LV UUID: AD2F1AB0-27DD-4091-8A29-54BEC4FC0280
Logical Volume Group:
Name: Macintosh HD
Size: 1.12 TB (1,120,333,979,648 bytes)
Free Space: 781.7 GB (781,698,187,264 bytes)
LVG UUID: 935158CF-7890-40C8-8BF1-B8E689FD52FC
Physical Volumes:
disk0s2:
Media Name: APPLE SSD SM128E Media
Size: 120.99 GB (120,988,852,224 bytes)
Medium Type: SSD
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
Status: Online
S.M.A.R.T. Status: Verified
PV UUID: B51EABA6-045B-4317-8B65-7C235AF4632C
disk1s2:
Media Name: APPLE HDD HTS541010A9E662 Media
Size: 999.35 GB (999,345,127,424 bytes)
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
Status: Online
S.M.A.R.T. Status: Verified
PV UUID: 847E555B-7DFD-450B-AFC8-B5D98AFD9037

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Long term Planning - capacity issue

Does any one have a way of running Long Term Planning in SAP.
When checking CM38 for production volumes, the start dates of
the planned orders always fall into the previous month from the
forecast (the monthly forecast is always placed on the first day
of the period and due to lead time scheduling the planned orders
to satisfy that forecast fall into the previous month). If i check the
capacity it show in same month for different month requirment.( it is clubing the requirment)
Though capacity scene was created from June to August , system shows loading from May month.
Month wise loading and availability are shown clubbed in capacity planning sheet.
Thanks in advanc....

Mukesh,
To change the forecast from occuring at start of period ( month) you can always select the Schedule line Tab in MD61,MD62. then select period indicator as Day format as shown below
Per. Ind          Date              Qty
D     17.05.2010     30
D     15.06.2010     40
D     15.07.2010     50
System will then plan PIR (forcast) based on dates assigned by user instead of being placed on the first day
of the period. This will prevent forcast to fall into the previous month. Also it will resolve the capacity issue you are facing.
If you have more questions please come back.
thanks,
Ram

Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5" high. Will they fit this model MacBook Pro?

Sorry, 12.5mm high not 12.5" high!
Can I fit a 1TB HDD into a MacBook Pro 17" 2.4GHz which was released in mid 2007? There are 1TB HDD available but they are 12.5mm high. Will they fit this model MacBook Pro?

Enough RG1 balance is not available to issue the Goods

Hi All
I am getting this error when I run "India - Excise Invoice Generation" Request by entering the Delivery Id. The Log file of the request showing this error ORA-20199: Enough RG1 Balance is not available to issue the Goods. But when I check the on hand quantity exists. Quantity is available even after reservation and shipping is done.
Can anyone please tell me the reason and resolution if you had faced this error before.
Thanks in Advance
Prem.

Process steps are as below .
Material master with base unit "SHT-Sheet" and maintained alternative unit "M2- Square Meter" along with conversion factor 4930 M2 = 100 SHT. Incoming quantity inspection type (01) is also active on the material.
Purchase Order quantity in alternative UnM like 1500 M2.
Purchasing Info Record maintained with alternative pricing Unit “M2”.
Good Receipt Quantity posted in the alternative Unit of Measure with 1500 M2.
Usage decision recorded with Base unit Quantity 30.426 SHTs
Error - PU GR blocked stock exceeded by 0.002 SHTs : 2847 1000 M7 22
Cause of error which i observed is below.
On usage decision, system calculating stock posting quantity "30.426" / Conversion factor "( 100 / 4930 )" = 1500.002 and this quantity "1500.002" exceeded from block stock quantity 1500 as posted at the time of GR in the block stock via 103 mvt.

Standard available capacity Vs actual capacity used in W/C

Hi Gurus
Can some tell me the tcode for a report which will give me the "Standard available capacity Vs Actual capacity used" for a Work Center?
regards
HR

HR,
It is unclear to me how this report falls short of your requirements.
CM01 displays Capacity requirements (load), Capacity available, and percentage of requirements vs available.
http://help.sap.com/erp2005_ehp_06/helpdata/EN/89/a41dd8461e11d182b50000e829fbfe/frameset.htm
Other ways of evaluating the same data: CM02, CM03, CM04, CM05, CM07, CM50.
I suggest you work with the standard reports for a while before you consider changing them. However, you can alter the standard cap evaluations in many ways. Review
http://help.sap.com/erp2005_ehp_06/helpdata/EN/91/dcac7377be11d183b30000e83235ee/frameset.htm
Config starts at IMG > Production > CRP > Evaluation. Work downward from there.
Best Regards,
DB49

Changing colour of Available capacity Line Graph in DIMSPPB_BARCHART_DEMO5

Hi all experts,
I am facing a problem in changing the colour of Available capacity Line Graph in program DIMSPPB_BARCHART_DEMO5. Currently it appears as a blue line. Can someone please help me in changing the colour of this graph to any colour I want.
Thanks in advance,
Mitrajit Debroy

Available capacity

Hi PP Experts,
Can anybody please explain me,
What is difference between Standard Available capacity,Available capacity & Pooled capacity.
Please explain with giving simple example if possible.Don't define.Please helpout.
Edited by: Raja S on Oct 17, 2008 8:11 AM

Dear,
We assign the Standard available capacity at capacity header (capacity view)of Workcenter (CR02).
In the work centre - capacity header overview give the following data in std available capacity sub heading
start :08:00:00
Finish:12:00:00
break:00:00:00
Capacity utlization - 100
No of ind capacity = 1
Hence the capacity of 16 hrs is fixed for this WC. This your standard avilable capacity.
OP37 Maintain Available Capacity Version
You can use it as Normal available capacity or maxnium avilable capacity. The active version of available capacity is used as a basis for scheduling.
Pooled capacity is nothing but an available capacity that can be used by several work centers.
An example of a pooled capacity is a group of setup personnel who perform setups for many work centers.
Pooled capacity
A pooled capacity can be assigned to several work centers. It is created and edited independently of the work center. This is useful if, for instance, a group of employees works in several work centers.
Capacities can be entered and changed in work centers, but also independently. The system distinguishes between.
For working with CR11 ,I think first the pooled capacity should be included in SPRO.
Just check out in SPRO-Production -BAsic Data-Work center-Capacity Planning-Define Capacity categories
Hope clears to you.
Regards,
R.Brahmankar

Fields for Available capacity in SAP

We are trying to generate Z report on Availabile capacity
Under normal transaction : by going in CR03 we can have Start time / Finish Time based on which we get operating time in hours, we need to capture the Avaialble capacity we are not getting this field in any SAP table
Max we go in KAKO by capacity ID of resource and get Start time, Finish Time , Breaktime in Seconds & % utilization how do i convert this in Hours,i have tried various combinations but it does not matches in CR03
Can anyone suggest how to convert this seconds or any other table from which i can get Availability Capacity in hrs

Dear Bhavesh,
Check this logic,
Available Capacity = From table KAKO take the fields BEGZT(shift start), ENDZT(shift end) and PAUSE(break time),divide this
value by 3600 and you will get it hours.
For example if BEGZT - 25200,then 25200/3600 = 07:00:00 start time.
ENDZT - 54000,then 54000/3600 = 15:00:00 end time.
Check this logic a.capacity = {(BEGZT - ENDZT) - PAUSE}NGRADAGNOR /100
Regards
Mangalraj.S

100GB HDD - 'Available' Capacity Issue

Similar Messages

Maybe you are looking for