11i Tax reports - R12 EbTax replacements

Hi gurus,
We are looking to upgrade some of the customizations made to the standard 11i reports:
AP Input Tax Group Listing (Short Name -> AP_ARXTTGL)
+ Is there a like to like replacement in R12 EbTax for this report?
+ Also, in general, how can I find the EbTax equivalent reports for the 11i ones?
Thanks,
Vinod

Pls check user guide on
http://docs.oracle.com/cd/B34956_01/current/acrobat/120apug.pdf
thanks

Similar Messages

R12 Ebtax upgrade- did not upgrade the Tax Jurisdictions

we have upgraded from 11.5.10.2 to 12.1.1.1 . The setup has been migrated to R12 Ebtax
But Dont see the tax Jurisdiction created at all ? why the system did not automatically create the Jurisdiction like it created the other components of Tax Configuration. How does this impact
I see a note 460059.1 on metalink but there is no error as such when creating manual invoices. the tax calcutates fine.
I have done a fresh tax set up in my previous project where creation of Jurisdiction ws mandatory for the subsequest ebtax setup

ernestokolie wrote:
... downloaded the yosemite fully (5.17GB) but the upgrade did not happened, the os remains the same. . .
The upgrade doesn't simply happen. The Yosemite installer is downloaded to your Applications folder and normally it starts but then waits for you to begin the actual installation. Look in your Applications folder for the installer, double click on it and follow the instructions. Note that when the installation is finished, the installer deletes itself. If you want to keep it for future use, duplicate it first.

To use 11i Tax "AS-IS" in R12

Hi All,
We are upgrading from 11.5.10 to R12.1.1. Could anybody help me to implement or use 11i Tax "AS-IS" in R12 ? I heard that this could be fixed through setting up a Tax Rule to use 11i Tax as is in R12, but I'm not sure of how to do this.
Your earliest reply is highly Appreciated.
Thanks,
Ashok

Hi Helios,
Thanks for the link. I did go through the Article Id long back. I'm looking for a white paper which would tell me step-by-step procedure or telling me which set-up's or configurations should I do to make "AS-IS" work with the Tax in R12. Let me know if you require any other info on this. Thanks for your help once again.
Thanks,
Ashok

US Sales Tax Report is running for more than 10 hours

Hi All,
Could any one please suggest us on below issue.
We have observed that "U.S. Sales Tax Report" Concurrent Program is running for more than 10 hours in R12 Production. The system has been upgraded from 11.5.8 to R12. Earlier in 11i, it was running for 1 hour and post upgrade its running more than 10 hours. As this program is a standard Oracle program, We are taking up this issue with Oracle support. But we wanted to know does anyone has the similar issues faced.
Many thanks,
Praveen

Pl do not post duplicates - US Sales Tax Report is running for more than 10 hours

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

Activate tax reporting date (VAT due date) Spain

Dear all,
My Spanish customer should start using electronic VAT book, Modelo 340. If I understood correct VAT due date (activate tax reporting date) is a prerequisite for this? If I activate this functionality in their system, what affect will this have except a new field?
Is it possible to do this during a year or should it be done in the beginning of a new year, from 1st of January? Does it matter?
What affect will it have on already existing documents?
If they start to use electronic VAT book, do they not need to use the ordinary Tax report, transaction S_ALR_87100833, then and use only this instead?
Please help me to understand how to tell the customer of how this will affect them.
BR L

Hi Paul,
I have already red these notes but don´t think that my questions are answered by these. Escpecially the question if ordinary tax report, program RFUMSV00 (transaction S_ALR_87100833) are replaced by Modelo 340, is not answered.
Could you please help?
BR L

Hi, I am oracle apps HRMS Technical consultant.I wanted to know ,can we implement Digital Signatures in Oracle apps 11i XML Reports.if yes what is the approach to do so ? Your quick response is appreciated. Regards , Aasma Sayyad.

Hi,
I am Oracle Apps HRMS Technical Consultant.
I wanted to know,if we can implement Digital Signatures in XML Reports for Oracle Apps HRMS 11i Aplication.
If yes,what is the approach to do so.
Your quick response is appreciated.
Regards,
Aasma Sayyad.

Hi Aasma,
The standard BI Publisher is part of EBS applications.
Most of the EBS reports(R12) are based on BI Publisher.
If you check the responsibility 'XML Publisher Administrator' you will see all the templates used in the application.
Your technical team should already know this.
On the other hand OBIEE would need separate licences.
But for you BI Publisher would do.
Cheers,
Vignesh

Taxes in R12

All,
I got the following Tax details from the ETRM. From the Oracle documentation, I observed that to support the customer migrated from prior release to R12, Oracle retains the 11i tax tables in addition to the new tables for R12.
EBusiness Tax
ZX_TAXES_B - This table stores taxes for multiple configuration owners. Each row stores a tax for a specific regime and configuration owner
ZX_TAXES_TL - This table provides multilingual support (MLS) for each tax. MLS enables you to store and print data that you define in multiple languages
ZX_TAX_PRIORITIES_T - This table stores priorities of taxes and regimes. Each row records the priority for either a tax or a regime. This table is used for tax groups’ migration from prior releases
ZX_TAX_RELATIONS_T - This table stores parent child relationships of tax codes within tax groups. This table is used for tax groups’ migration from prior releases
I have following queries,
Since Oracle retains the tax tables of 11i in R12, does that mean during migration, 11i table data will move to the new R12 tables?
If not, do we need to maintain two separate queries to pull Tax info?
Creating Tax Groups. The two tables (ZX_TAX_PRIORITIES_T & ZX_TAX_RELATIONS_T) say it supports tax groups’ migration from prior releases!!!
How to create Tax Groups? Will it affect these two tables?
Nb: I gone thru the R12 Config & User guide. It talks more about functional than technical. Any pointers to tech.doc would be of great help
Thanks,
Sen

Upgrade details are in the "Oracle Financials and Oracle Procurement Functional Upgrade Guide : Release 11i to Release 12" (Chapter 3) available at
http://download.oracle.com/docs/cd/B40089_10/current/html/docset.html
HTH
Srini Chavali

Upgrading 11i Payments to R12 Payments

Hi All,
We are now on Oracle EBS 11i [11.5.10.2] and Database 10g [10.2.0.4] now and we are planning to upgrade to R12.
We want to upgrade the all payment formats and templates to R12.
We have couple of questions..
1) How can we upgrade the reports(payments sent to Banks) to R12?
-- I know we need to use the e-text templates to achieve that, but my questions is , we have RDF files in R12 which fetches the data for us and have different RDF files for different layouts. So will it be the same case in R12 as well.
2) I have heard about common data extract in R12, how do we get that, what all changes needs to be done for that to have common data extract for all the Layouts(Templates).
Can you also please share if there is any document created to achieve this requirement.
Thanks,
S.

Duplicate Post. See answer here:
Re: Upgrading 11i Payments to R12 Payments
Regards,
Gareth
http://garethroberts.blogspot.com

TAx Reporter Temse Files Download Automation

Hi,
I have a reuiqrement to download the Temse files generated in Tax Reporter. I have completed the code and it works fine if we run the program in foreground. But when I run the same program in background some Temse files downloaded have junk characters. If I download the same Temse file in foreground it works fine.
There seems to be some issue with the FM when I run my progam in background.
I have searched SDN and SAP Notes for any clues but did not get any.
REPORT ZPHOP_TEMSE NO STANDARD PAGE HEADING
                  LINE-SIZE 1023
                  LINE-COUNT 65
                  MESSAGE-ID zz.
DATA: BEGIN OF tape OCCURS 1,
         DATA(2000),
      END OF tape.
DATA: force_ascii type c VALUE 'T'.
DATA: BEGIN OF int_msgs2 OCCURS 10,
         errnum(2) TYPE c,
         text1(8) TYPE c,
         text2(60) TYPE c,
       END OF int_msgs2.
DATA: BEGIN OF g_int_temse OCCURS 0,
         dname    LIKE TST01-dname,
         dpart    LIKE TST01-dpart,
         dcretime LIKE TST01-DCRETIME,
         dcreater LIKE TST01-DCREATER,
      END OF g_int_temse.
DATA: record_length TYPE i VALUE 275,
       data_length    TYPE i,
       convert_to_ebcdic,
       filesize TYPE i,
       number_of_records TYPE i VALUE 1,
       filetype(3) VALUE 'BIN',
       conv TYPE REF TO cl_abap_conv_out_ce,
       dline TYPE REF TO data,
       dtab TYPE REF TO data,
       p_compid(4),
       p_pswd(8),
       g_str(2000),
       uc_filename TYPE string.
DATA: l_nm_fixed_record.
CONSTANTS: c_lpath TYPE pathintern VALUE 'ZOUT'.
TABLES: TST01, ZPHOPFLS, ZTEMSE_LOG, V_5UXY_A.
FIELD-SYMBOLS: <dtab> TYPE STANDARD TABLE,
               <dline> TYPE ANY.
INCLUDE: dbpnpcom.           " No logical database        Do not modify!
INCLUDE: zphoptop,           " Top Include                Do not modify!
         zphopfil.           " File inlcude               Do not modify!
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-T01.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-001.
SELECT-OPTIONS s_temse FOR TST01-dname NO INTERVALS.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE text-T02.
SELECT-OPTIONS s_cai   FOR TST01-DCREATER NO INTERVALS.
SELECT-OPTIONS s_date FOR sy-datum.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE text-T03.
PARAMETERS: p_ifid   LIKE t9aoa-if_id MODIF ID DIS ,
            p_fileid LIKE t9aoa-file_id MODIF ID DIS,
            p_unixf(60) LOWER CASE MODIF ID DIS,
            p_uxdir TYPE pathextern LOWER CASE MODIF ID DIS,
            p_dstfil(45) LOWER CASE MODIF ID DIS.
SELECTION-SCREEN END OF BLOCK B3.
PARAMETERS: p_skip AS CHECKBOX.
DATA: ws_unixr LIKE p_unixf,
      ws_trans LIKE p_unixf.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-group1 = 'DIS'.
      screen-output = '1'.
      screen-input = '0'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
INITIALIZATION.
p_ifid = 'PAYFLS'.
p_compid = 'HR00'.
p_fileid = '01'.
p_unixf = 'AFS'.
p_pswd = 'chevr123'.
p_skip = 'X'.
-End of Initialization--
PERFORM get_physical_path.
FORMAT COLOR COL_HEADING.
WRITE: /01 text-t04,
          10 sy-pagno,
          41 text-t05,
         110 text-t06,
         123 sy-datum.
WRITE: /01 text-t08,
          14 sy-repid,
         110 text-t07,
         125 sy-uzeit.
FORMAT COLOR OFF.
SKIP.
WRITE: /(20) text-T21       CENTERED COLOR COL_HEADING,
          (15) text-T22       CENTERED COLOR COL_HEADING,
          (20) text-T23       CENTERED COLOR COL_HEADING,
          (15) text-T24       CENTERED COLOR COL_HEADING,
          (40) text-T25       CENTERED COLOR COL_HEADING.
START-OF-SELECTION.
*Do not allow background processing
*Check if the Temse file and CAI both are entered
IF NOT S_TEMSE IS INITIAL AND NOT S_CAI IS INITIAL.
   MESSAGE W999 WITH TEXT-E01.
ELSEIF S_TEMSE IS INITIAL AND S_CAI IS INITIAL.
   MESSAGE W999 WITH TEXT-E02.
ENDIF.
Collect all temse filenames from TST01 into an internal table.
IF NOT s_temse IS INITIAL.
   SELECT dname dpart dcretime dcreater FROM TST01 INTO TABLE g_int_temse
          WHERE dname in s_temse
          AND   dpart EQ '1'.
ELSE.
   SELECT * FROM TST01
          WHERE DCREATER in s_cai
          AND   DPART EQ '1'.
     IF TST01-DCRETIME(8) GE s_date-low
         AND TST01-DCRETIME(8) LE s_date-high.
        MOVE-CORRESPONDING TST01 TO g_int_temse.
        APPEND g_int_temse.
     ENDIF.
   ENDSELECT.
ENDIF.
SORT g_int_temse BY DNAME DPART DCRETIME.
LOOP AT g_int_temse.
Check if the temse file is already processed in ZTEMSE_LOG table.
SELECT SINGLE * FROM ZTEMSE_LOG
         WHERE DNAME = g_int_temse-dname.
IF sy-subrc EQ 0.
error. Temse already processed
     CONTINUE.
ENDIF.
Check if the temse file bieng processed is the eligible temse file
SELECT SINGLE * FROM V_5UXY_A
         WHERE TSOBJ = g_int_temse-dname.
IF sy-subrc EQ 0.
     SELECT SINGLE * FROM ZPHOPFLS
         WHERE TAXAU = V_5UXY_A-TAXAU
         AND   TXFRM = V_5UXY_A-TXFRM.
     IF sy-subrc EQ 0.
Generate the filename for the target destination
        CONCATENATE ZPHOPFLS-FILENAME '.' sy-datum '.' sy-uzeit INTO p_dstfil.
     ELSE.
error. Script not maintained in ZPHOPFLS table
        CONTINUE.
     ENDIF.
ELSE.
error. Temse file is not the latest processed file.
     CONTINUE.
ENDIF.
CALL FUNCTION 'RP_TS_OPEN'
    EXPORTING
      tsobj = g_int_temse-dname
     versn = g_int_temse-dpart
      empfg = 'RPUTSVUM'.
COMMIT WORK.
REFRESH tape.
CLEAR   tape.
Einlesen von der TemSe
CALL FUNCTION 'RSTS_READ'
    EXPORTING
       PARTS1BY1 = 'X'
    TABLES
      datatab = tape.
CALL FUNCTION 'RSTS_CLOSE'.
Read the 1st line which is supposed to contains info important for
the downloading procedure. The syntax of the line is :
SAPxxxnnnyyyy - the 1st 3 char 'SAP' indicates this line contains
download related info. xxx can either be 'ASC' (for ASCII) or 'EBC'
(for EBCDIC). nnn is the length of each record, e.g. 128 for SSA disk
format, 275 for SSA tape format etc. yyyy can either be 'CRLF' (each
record is delimited by CRLF) or blank (no CRLF).
After processing the 1st line, the line is deleted from the internal
table. Downloading begins on the 2nd line.
READ TABLE tape INDEX 1.
IF tape-data(3) EQ 'SAP'.
    IF tape-data+3(3) EQ 'EBC'.
      convert_to_ebcdic = 'x'.
    ELSEIF tape-data+3(3) EQ 'ASC'
          AND force_ascii EQ 'T'.
      filetype = 'ASC'.
    ENDIF.
    IF tape-data+6(3) NA '*'.
      record_length = tape-data+6(3).
    ELSE.
      record_length = tape-data+13(4).
    ENDIF.
    IF tape-data+9(4) EQ 'CRLF'.
      data_length = record_length + 2.
    ELSE.
      data_length = record_length.
    ENDIF.
    DELETE tape INDEX 1.
ELSE.
    data_length = record_length.
ENDIF.
Transfer the Temse file data to Unix file.
      PERFORM transfer_file.
Update the Log table with the temse details.
      ZTEMSE_LOG-dname = g_int_temse-dname.
      ZTEMSE_LOG-txcmp = V_5UXY_A-taxau.
      ZTEMSE_LOG-txfrm = V_5UXY_A-txfrm.
      ZTEMSE_LOG-filename = ws_unixr.
      ZTEMSE_LOG-DCREATER = g_int_temse-dcreater.
      INSERT ZTEMSE_LOG.
    WRITE: /(20) ZTEMSE_LOG-dname,
            (15) ZTEMSE_LOG-txcmp,
            (20) ZTEMSE_LOG-txfrm,
            (15) ZTEMSE_LOG-dcreater,
            (40) ZTEMSE_LOG-filename.
ENDLOOP.
*&      Form get_physical_path
      Get Physical directory name for the given logical path name
FORM get_physical_path .
CALL FUNCTION 'ZFILE_GET_PATH_NAME'
    EXPORTING
      LOGICAL_PATH               = c_lpath
    IMPORTING
      FILE_NAME_PATH             = p_uxdir
    EXCEPTIONS
      PATH_NOT_FOUND             = 1
      MISSING_PARAMETER          = 2
      OPERATING_SYSTEM_NOT_FOUND = 3
      FILE_SYSTEM_NOT_FOUND      = 4
      OTHERS                     = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " get_physical_path
*&      Form TRANSFER_FILE
FORM transfer_file.
p_unixf = 'AFS'.
Concatenate Date with Unix File name
CONCATENATE p_unixf '.' p_compid '.' p_ifid '.' sy-datum '.' sy-uzeit INTO ws_unixr.
Concatenate Unix Directory with Unix File for Outbound
CONCATENATE p_uxdir ws_unixr INTO p_unixf.
PERFORM open_files USING p_unixf.
LOOP AT tape.
     g_str = tape-data(record_length).
    TRANSFER g_str TO p_unixf LENGTH record_length.
    IF sy-subrc <> 0.
      MESSAGE ID '00' TYPE 'E' NUMBER '398' WITH 'sy-subrc:' sy-subrc
       ' Error Transferring to: ' p_unixf.
    ENDIF.
ENDLOOP.
PERFORM close_files USING p_unixf.
ENDFORM.                    " TRANSFER_FILE
Can anyone please check and tell me what I need to overcome this problem.

Hi Bhaskar,
I also have the same requirement to upload TemSe files in to application server.
In FDTA tcode after we enter company code and click on enter.
In the second screen checking and line item and go to edit and click on download button.
Here we see a popup with default file name, and when we say ok the file will get downloaded into C:\.....
Here our req is to upload the file automatically pick up via batch job and place it in the in to the application server and from there it should be placed in the Netwrok server (UNIX).
Pls provide me with suitable code so that i can finish it off.I tried a lot but did not work.
Thanks.

Not yet solve....TAX Report regarding (client)question

Client asked to me in interview, please give me answer
This is regarding US PAYROLL
1 Transaction PU19 Reports for tax reporting/Tax Returns / Files for State Unemployment Reporting on CD or Diskette :-
We have issues on some reports regarding address, page numbers and totals. Alex worked on it and told that we need to contact SAP         for help as he thinks problem is with SAP Forms itself. Currently typing manual returns pending changes to forms.
2 Deposits on 941 form:-
   Can we update the form to include tax deposits made on the 941 line for deposits?
3 State Tax Returns not configured in SAP:-
   Can we have state tax returns configured in the PDF format also?
4 Printing of W-2:-
Need to be able to print W-2s so we can fold/seal so address apprears on outside for mailing. Duplex or 11/14 form? Our folder/sealer uses pressure seal self sealing forms.
5 Documentation of Processes (Benefit and Garnishment):-
6 Configure benefit changes for 2009:-
7 Update benefit tables / rates for 2009:-
8 'Update SUT rates for new year:-
9 New 401k Limits Entered :-
Documentation how to do this
10 W-2 Reporting, Non Taxable Relocation, Personal Use of Company car (Box 12 and 14 items) for W-2 Reporting:-
11 Deceased Employee Payments:-
How do we handle so W-2 is correct and any 1099 items handled correctly
12 'Mag Media File - Federal (annual):-
'RS record missing from Magnetic Media file. Can this be included in the Federal Mag Media file? Kathy has sent some changes that need to be made to Frank.
13 'State Mag Media Files and State annual returns:-
Have some states that we must file by diskette file. Can we also have annual state tax returns configured in the PDF format?
14 Federal 940 Return:-
Make sure this form is configured correctly
15 Pension Plan Indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
16 Third Party Sick Pay indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
17 Retirement Calculation:-
18 Year end close procedure:-
What all has to be done before we can close the year and print W-2's. Do we have to do any zeroing of wages, taxes and deductions before the first check of the new year can happen?
19 Sort order for W-2 printing:-
20 941 Correction Form (941C):-
Need training on how this is handled
21 'W-2 correction form (W-2C):-
Need training on how this is handled
22 'Payments received in January that affect prior year W-2:-
'How do we handle. We receive info in January that must be included on the prior year W-2. Want to be able to include on original W-2 without filing a W-2C. (Third Party Sick Pay, Payments made in Mexico, Germany, etc) Usually don't receive.
Regards

Aswin,
The client session is your primary TopLink interface abstracting over the shared cache and connection pooling. Depending if you are using internal or external connection pooling and the transaction state you are in TopLink may have a JDBC connection allocated to your client session. A client session does equate to a single dedicated JDBC connection for its entire lifecycle.
Assuming you are using an external connection pool (Application server's data source) your client session will have a connection from this data source when required to perform a read and during the commit of its UnitOfWork.
Doug

Tax Report for Canada

Hi everyone!!
Does anyone knows the tax report that should be used for Canada? We have advised the business to use the standard S_ALR_87012394 (Record of Use and Sales Tax - USA) as it provides de info by customer/vendor, tax code and jurisdiction code.
However, they have now come back to us saying that they will also need the system to display all the taxable items where a customer/vendor account has not been impacted. We have debugged the program and the system will only consider the customer/vendors' taxable items.
Has anyone come through this issue before?
Thank you very much in advance. Best regards

Check this Configuration Guide
[External Tax Determination - Canada|http://help.sap.com/bp_blv1600/BL_CA/documentation/ExtTax_ConfigGuide_EN_CA.doc]
thanks
G. Lakshmipathi

Tax Report Returns No Data [Message 131-85]

Our client has been using SBO for the past few years and run the Standard Tax Report.
They follow a standard procedure whereby they open the Tax Report enter the period details and click OK, the report returns all Input and Output Tax details.
This month they have run the report and no matter what dates you enter the report returns No Date [Message 131-85]
Does anyone have any clues as to what might be causing this?

I have discovered via a SQL trace that the following script is tun for the tax report
exec sp_executesql N'
SELECT      T0.[AbsEntry],
     T0.[Code],
     MIN(T0.[Name]),
     T0.[SrcObjType],
     T0.[DocNum],
     MIN(T0.[Category]),
     MIN(T0.[IsEC]),
     T0.[IsAcq],
     MIN(T0.[VatPercent]),
     MIN(T0.[EqPercent]),
     T0.[DocDate],
     MIN(T0.[TaxDate]),
     MIN(T0.[CANCELED]),
     SUM(T0.[BaseSum]),
     SUM(T0.[VatSum]),
     SUM(T0.[EqSum]),
     SUM(T0.[DeductSum] - T0.[EqSum]),
     MIN(T0.[SrcObjAbs]),
     N''0'',
     0,
     0,
     MIN(T0.[DocDate]),
     0,
     0,
     MIN(T0.[NumAtCard]),
     SUM(T0.[BaseSumSc]),
     SUM(T0.[VatSumSc]),
     SUM(T0.[EqSumSC]),
     SUM(T0.[DedctSumSC] - T0.[EqSumSC]),
     MIN(T0.[TaxType]),
     T0.[CrditDebit],
     MIN(T0.[CardCode]),
     MIN(T0.[CardName]),
     MIN(T0.[SrcLineNum]),
     MIN(T0.[VatDate]),
     MIN(T0.[VatIdUnCmp]),
     MIN(T0.[LicTradNum]),
     MIN(T0.[BPLicTradNum]),
     MIN(T0.[AddID]),
     SUM(T0.[BaseSum])
     FROM [dbo].[B1_VatView] T0
     WHERE (T0.[Code] = (@P1) OR
     T0.[Code] = (@P2) OR
     T0.[Code] = (@P3) OR
     T0.[Code] = (@P4) OR
     T0.[Code] = (@P5) OR
     T0.[Code] = (@P6) OR
     T0.[Code] = (@P7) OR
     T0.[Code] = (@P8) OR
     T0.[Code] = (@P9) OR
     T0.[Code] = (@P10) OR
     T0.[Code] = (@P11) OR
     T0.[Code] = (@P12) ) AND
     T0.[DocDate] >= (@P13) AND
     T0.[DocDate] <= (@P14)
     GROUP BY T0.[AbsEntry], T0.[Code], T0.[SrcObjType], T0.[DocNum], T0.[IsAcq], T0.[DocDate], T0.[CrditDebit]
     ORDER BY T0.[IsAcq] DESC,T0.[CrditDebit]',N'@P1 nvarchar(30),@P2 nvarchar(30),@P3 nvarchar(30),@P4 nvarchar(30),@P5 nvarchar(30),@P6 nvarchar(30),@P7 nvarchar(30),@P8 nvarchar(30),@P9 nvarchar(30),@P10 nvarchar(30),@P11 nvarchar(30),@P12 nvarchar(30),@P13 datetime2,@P14 datetime2',N'SEXP',N'SFRE',N'SGST',N'SNT',N'PCAF',N'PCAP',N'PFRE',N'PGNR',N'PGST',N'PGSTV',N'PNT',N'PPRI','2010-03-01 00:00:00','2010-03-31 00:00:00'
If I run this in SQL I get the following error, which mat shed some light on what is happening
Msg 2715, Level 16, State 3, Line 1
Column, parameter, or variable #13: Cannot find data type datetime2.
Parameter or variable '@P13' has an invalid data type.
Msg 2715, Level 16, State 3, Line 1
Column, parameter, or variable #14: Cannot find data type datetime2.
Parameter or variable '@P14' has an invalid data type.

Tax Reporting Date for Cz Republic in report S_ALR_87012357/RFUMSV00

Hi All,
We activated Tax reporting date as per SAP Note 1023317. However we are not able to see in the report "S_ALR_87012357 / RFUMSV00" tax reporting date column which should show which document has which date assigned to it. I executed the report with tax reporting date.
Please help me to find out how to get the column in this report.
Regards,
Abishek

hi Giovanni Baumann .,
will u please tell me how u added NAME1 field to on the output list Layout on the report . please guide me on this.
Regards.,
S.Sivakumar

Generating a document that will not show on the tax report

Good Morning,
I have an interesting situation involving the Tax report and the GL. My client had a AR down payment invoice that was entered in error and they made a credit note to cancel it and re enter the invoice correctly. Now when you look at the BP balance everything is correct however when you look at the tax report their is an extra credit because the Credit Note appears but the AR down payment invoice does not.
Ultimately my questions are how do I make an entry to correct the tax report and for the future how do I correct a down payment document without hosing the Tax report?
Thank you for your consideration,
John-Michael

Hi John-Michael,
when you create a DT invoice with the appropriate tax code, this document will appear in the tax report. When using the copy-to functionality in the DT invoice to create the credit memo, it will draw all data including the tax to that document. In the tax report these 2 transactions then cancel each other out.
To correct the entry in your db I would hence recommend to reverse the credit memo with an appropriate invoice & then use the DT invoice as base document for the correct CM.
All the best,
Kerstin

11i Tax reports - R12 EbTax replacements

Similar Messages

Maybe you are looking for