3D annotation poster image: Retrieve poster from default view

Hello
     I have developed a plugin whic embed 3D data into annotation.
     In deactivated mode of 3D annotation i show annother image as appearance and it works great,My problem is i want show the poster image as snapshot of default view of 3D annotation the same way we have setting in propery page of 3D annotation. (Properties->Lauch settings ->Poster Image->Retrieve poster from default view).
     How can i achieve this using c++ sdk ?

You probably need to find some way to render offscreen and grab the bits or something. AFAIK, that's computed/rendered when you choose that and then embedded asa static image.

Similar Messages

How to retrieve data from a view.

HI,
I want to retrieve the values of the <b>Field MNTXT from the view V_T530</b>.
Please let me know how i can retrieve data from this view.The Select statement doesnt work on a view.
Regards,
Bhavika

Hi kumar,
By using select stattement you can fetch from view.
Here viaufkst is view.
For it is working. please check.
select (g_selfields_tab) from viaufkst
          into corresponding fields of table order_itab
                   for all entries in order
                          where                "(g
                          aufnr in order and
                          equnr in equip and
                          priok in prior and
                          iphas = '3' and
                          ilart in acttyp and
                          qmnum in notif and
                          werks = plant and
                          auart in ortyp and
                          getri in date.
please try.
with Regards,

How to retrieve data from restricted views

Hi,
i want to query data from PO_LINES_V , but no data retrieved, i m using R12 please provide the solutiion
Thanks
NQ

As you mention in your title it's some sort of a restricted view. That's for a reason I guess.
Since I don't know the definition of your PO_LINES_V, there is no way to tell why you are not allowed to retrieve data from the view. Check the WHERE clause of this view.

Trying to post images to Facebook from within Lightroom

I know that this will work, but unfortunately I have not been able to get this to work, and after spending nearly 3 hours with technical support, I am no closer than when I started the call.
I get the following error message
This content is currently unavailable
The page you requested cannot be displayed right now. It may be temporarily unavailable, the link you clicked on may have expired, or you may not have permission to view this page.
Has anyone seen this or know what to do with it since technical support kept getting this and did not know what to do?
I am on Windows 7 with latest updates along with Lightroom 3.4.1 on a 64 bit system with 12 gig of ram. Lightroom was originally installed on D drive but per support, it is now installed on the C drive which resulted in the same behavior.
The account setup on Facebook appears to be corrrect and the image appears to post until clicking on the "view on Facebook" is selected.
Thanks,
David

Yes. All images are imported into lightroom and editable. Green light is also showing on the folders tab just the same as with my c drive. I can move/rename images and folders etc from explorer but then have to locate them for lightroom to find.

Error retrieving Certificate from Default JKS in PI 7.1 WAS JAVA

Hi everyone.
I'm trying to retrieve a Certificate from the Default JKS of a WAS Java (PI 7.1).
Java code follows:
+InitialContext ctx = new InitialContext(ctxProp); +
Object o = (Object) ctx.lookup("keystore");
KeyStoreManager manager = (KeyStoreManager) o;
KeyStore keyStore = manager.getKeyStore("DEFAULT");
Certificate ret = ks.getCertificate("ProofCert");
While executing, following Exception arise:
incompatible with interface com.sap.aii.security.lib.KeyStoreManager:sap.com/PIC-WRAPPER-FD-EAR-library-loader
It seems that I need additional libraries:
I have imported that:
import java.security.KeyStore;
import java.security.cert.X509Certificate;
import com.sap.aii.security.lib.KeyStoreManager;
//import java.security.cert.Certificate;
Has anyone some Idea of what is happening? What addiotional libraries I need?
Java version is 5.
Regards,

You need to import the following security libraries:
\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\bin\ext\com.sap.aii.sec.lib\lib\com.sap.aii.sec.lib_api.jar
\usr\sap\<SID>\DVEBMGS00\j2ee\cluster\bin\ext\com.sap.aii.sec.lib\lib\private\com.sap.aii.sec.lib_core.jar
and all the libraries under "security.class".

Posting images in post?

How can I post photo's in this post so that people can know what I'm talking about?

In the future, post these types of questions in the forum designed just for questions about the Apple Forums. is the forum. Here is the link.
Also, here is another helpful post about customizing your posts in the forums. It has instructions for color changes, photos, links, etc...
Hope this helped!
C h r i s t o p h

Urgent!!!!!!!!!!!Reg retrieving data from a view in the data base

Hi All,
   My problem is that i need to retrieve some data from V_TTDS which is a VIEW in the ABAP-Dictionary.How can i accomplish this task.

Hi,
this is a maintenance view
so you cannot write the select query
but you can write the select query on TTDS
TTDST tables
as these are the two tables involved in this
this is the condition maintained to get this view
TTDS     MANDT     =     TTDST     MANDT
TTDS     TPLST     =     TTDST     TPLST
select a~field
          b~field1
from ttds as a inner join
ttdst as b on atplst = btplst
into table itab
where conditions
then it will work
regards,
Venkatesh

Is it possible to retrieve the data from maintainance view?

Hi experts,
Am facing one problem.
Is it possible to retrieve the data from Maintainance View ,If yes how?
IF it is not possible then Y?
While am trying to retrieve data from maintainance view it's showing message like
"it is not a database view or table".
Can u pls give me ans.
Thanks&Regards,
Arun.

Hi Arun,
It is not possible to retrieve the data from Maintenance view. Maintenance View is different and Database View is different.
Maintenance view : Maintenance view permits you to maintain the data of an application object together.The data is automatically distributed in the underlying database tables.
A standardized table maintenance transaction is provided (SM30), permitting you to maintain the data from the base tables of a maintenance view together.
In other words, Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Database View: Data about an application object is often distributed on several database tables. A database view provides an application-specific view on such distributed data.A database view is automatically created in the underlying database when it is activated.Database views implement an inner join.If the database view only contains a single table, the maintenance status can be used to determine if data records can also be inserted with the view. If the database view contains more than one table, you can only read the data.
Database views should be created if want to select logically connected data from different tables simultaneously. Selection with a database view is generally faster than access to individual tables. When selecting with views, you should also ensure that there are suitable indexes on the tables contained in the view.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

Hiding action button from UWL default view

Hi All,
In our UWL, we have created a subview for mass approval of leave requests.In this case, the mass approval button is appearing in default view as well.We want the buttons to be restricted only to the subviews and should not be displayed in the default view.
We tried the below code in XML under default view but it didn't work
<Action name="ApproveI" groupAction="yes" handler="uwlExcludeAction" referenceBundle="levatt.ess.ApproveSelected"/>
Pls. suggest how to hide this from default view.
Thanks,
Arun

Hi Arun
I hope you are well and many thanks for using the SAP Discussion Forums .
Ok in relation to the scenario that you have described you mentioned:
You created a subview for mass approval of leave requests.In this case, the mass approval button is appearing in default view as well. You want the buttons to be restricted only to the subviews and should not be displayed in the default view.
<Action name="ApproveI" groupAction="yes" handler="uwlExcludeAction" referenceBundle="levatt.ess.ApproveSelected"/>
Firstly from a general perspective we need to remember two key principals in terms of the editing of XML files.
XML files follow the concept of precedence. Therefore when you make changes to any XML files or create an entirely new XML file these files need to be re-uploaded with a new priority. To realize changes with XML files and see the changes "graphically displayed" on the portal you need to re-upload the files with a new priority of "High" or "Very High". Also after making the changes you need to clear the UWL Cache or restart the UWL Service (not portal) to see the desired changes displayed.
The second point to highlight here is to ensure that you make and perform a backup of current XML files which are unedited. The reason for this is simply to allow changes to be reverted easily if required.
Now back to the scenario you want to remove this mass approval option from the default view.
There are a few approaches here, and I have outlined guidance documentation below for your cross referencing and convenience:
Removing Actions From the UWL Display
https://help.sap.com/saphelp_nw73/helpdata/en/4a/f09ebd4a5a6d62e10000000a42189c/content.htm
XML Code To Remove Buttons
UWL XML Code to remove buttons Forward,Resubmit and Assign to Me - Portal - SCN Wiki
If you enable the support information for a given workitem associated with the button you should be able to remove the button action by removing the XML code or editing the "Actions To Exclude" section:
Please enable the Support Information of UWL. You could find the details in the following note:
SAP Note: 1532883 - How to Enable the Support Information for Troubleshooting issues in the Universal Worklist (UWL)
There should be some reference to the Approval button in the file which will need to be removed.
Kindly update me as per your findings and let me know if you find the desired resolution.
I will be keeping an eye on the thread in the meantime awaiting your response.
Kind Regards & All The Best
Troy Cronin - Enterprise Portal Support Engineer

Changing default view to match Inventor default view

Hi All,
Upon creating my Parasolid Binary File from Inventor 2012 for use to build the 3D PDF, I do so from a specific view angle. After Acrobat and 3D PDF Converter do their conversion, it would appear that my specific view angle is completely ignored and a very unflattering view angle is substituted. It is highly desired by our customers that the default view (the one used to "Click to activate") in the final PDF has a more appropriate view angle. Does anybody know how to maintain or reassign my initial preferred view angle?
Thanks

Hopefully this is what you are looking for...
After creating the new view, which it sounds like you did, click on the "Options" button in the Model Tree's "Views" pane (the middle pane) and select "Set as default view". Then right-click (control + click on the Mac) and select "Properties..." from the context menu. In the "Launch Settings" tab, down in the "Poster Image" area, click the 2nd radio button, "Retrieve poster from default view".

Default Viewing Size

Since upgrading from CS5 to CC images open with a default viewing size that is very small, like 3 - 5 %. Can this be changed to "Fit to View" I know that it is just a case of COmmand-0 to make it that size, but one less thing to do would be nice.
Thanks
Craig

Here's what I think is happening:
1. You didn't realize that the Application Frame is just an option, so you dragged the bottom up so that Photoshop is a very short window.
2. You later turned off the Application Frame while it was very short.
3. Under some conditions, now Photohshop still thinks it wants to open documents and make them fit in the (now hidden) short application frame.
Try this:
Re-enable the Application Frame.
Stretch the bottom of the Photoshop window down so that it (nearly) fills your screen.
Disable the Application Frame again.
-Noel

How to post images from camera to facebook???

Hi.
I've got Nokia E52. IMHO once you pay over 250EUR for the product, it has to be AT LEAST user friendly. However, some free services are more user friendlier than Nokia.
Could someone tell me.. how can I:
- Choose image from list
- Click share
- And simply post it to my facebook wall.
I know it can be done via sending image via e-mail to specific address. But it's reall ugly workaround. To use it I'd have to setup mail inbox on phone. Then I' d have to store all my messages on memory card, since I have too many emails. But then whole messaging application works very f..in slow!
So please, anyone, is there humane way to share images to facebook from Nokia E52?
BR
BR

Pl. check whether this works on your phone too..!!!
http://www.wikihow.com/Upload-Images-to-Facebook-with-a-Nokia-N-Series-Phone
http://www.wonderhowto.com/how-to-upload-pictures-facebook-nokia-c6-01-smartphone-420451/
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

SharePoint 2013 Add Author image in default view of blog post

Hi,
How to add Author Image in the Default view of SharePoint 2013 blog site.
Thanks
ram

Hi Ram,
According to your description, my understanding is that you want to display author picture in SharePoint blog.
In my test, we can achieve the demand as following steps:
Go to the blog site ->Site Actions -> View All Site Content ->Posts.
In the Posts list, go to List Settings-> click Created By column in the Columns section.
In Additional Column Settings, select
Name (with picture) or Name (with picture and details) for Show field.
Reference:
https://social.technet.microsoft.com/Forums/en-US/0d2fd27b-c96e-4c24-a1c8-e415969693bd/authors-image-on-blog-posts?forum=sharepointcustomizationpreviou
Best Regards,
Eric
Eric Tao
TechNet Community Support

Default poster image for each exported video

Anyone know of a way to change the default "poster image" of each video that is exported to the MobileMe web gallery? The default icons that show up for each movie in my gallery aren't very good and I'd like to change to a different frame if possible. I know you can do this easily for photo albums by setting the key photo but cant find a similar way for videos. Maybe there is a setting in iMovie that I'm missing?

So I wasn't going mad after all - Brightcove's player default is with greyed out image
"the overlay button is standard for all our HTML5 Players and this cannot be changed through the publishing code or the player settings. the main reason for this being there is to indicate the user that it is a clickable image that loads the video. If you wish to replace that image, you would have to implement some custom code that would display the image of your choice above The Brightcove player and add some action to replace the image with the video when it is being clicked. An example of this you can find here:
http://distractedtype.com/test/replaceImage.html
It uses some javascript to make one div with the BC publishing code visible, when the image has been clicked."

BUG?: Poster images don't have folder permission by default?

I love what you guys are doing with this, and obviously, the bugginess of the program is because it's an early, rapidly-developed product. Keep up the good work, and I'm sure future releases will be more improved. - Ian
BUG:
Out of the box, when publishing using Adobe Deployment Package and using Poster.png for the poster image with these settings:
I get the this error:
I tried creating the required Temp folders and setting permissions (which I shouldn't have to, of course ) but continued to get errors for the generated files, to wit:
And of course, the Adobe Deployment package was not created, just the empty containing folder in the publish folder.

Okay, I was able to reproduce the issue and will file the bug. The way I was able to get it was I made an initial poster image, deleted it by hand, and then tried to republish. Workaround: refresh your poster image and then publish.
-Elaine

3D annotation poster image: Retrieve poster from default view

Similar Messages

Maybe you are looking for