7925G drops registration and reboots during call

We have 4 of these phones connecting to 2600i AP's on a WLC. They can sit idle for hours, but when you make a call, it will work, then at random, just drop off and reboot. I also noticed that response times to all 4 phones will be good, around 30-40 ms then skyrocket after a while to upwards of 600 ms. I dont know if this is normal, and happens when the phone is idle, but I did notice when calling extension to extension between 2 phones response times were normal.
When the call drops, ping stops responding.
I have done quite a few deployments, and can find nothing wrong on the WLC or callmanager, this is a first I have ever seen this. Not sure if its a bug on the WLC, or the phone.

I also noticed that response times to all 4 phones will be good, around 30-40 ms then skyrocket after a while to upwards of 600 ms.
You will get high response time when there phone is on idle. Good ping time happens when you are on a call.
They can sit idle for hours, but when you make a call, it will work, then at random, just drop off and reboot.
Make sure your phones are running firmwares version 1.4(3) and higher.

Similar Messages

ZTE Open C reboots during calls

The phone reboots during calls. OS version 1.3, latest according to ZTE.
Thing is, only when it is set to use 3G. But if I set to 2G the audio is absolutely terrible.
Both when using 2G and 3G sometimes the calls get cut-off on the receiver phone. I can hear the other person talking but the other person doesn't hear anything. This is another issue.
What can I do? The phone was bought from Ebay on September 2014.
Problem didn't start now, ZTE Ebay support said the issue was a SIM one. I recently changed to 3G because the noises in 2G are almost unbearable.

''Ralph Daub [[#answer-713346|said]]''
<blockquote>
Hi Falconet,
I understand you are experiencing rebooting and call quality issues on your ZTE Open C device.
Since ZTE is responsible for the Firefox OS build specific to your device, I would suggest following their advice.
You may be able to request a new SIM card for your device by contacting your carrier support.
I hope this resolves your issue. Please let us know if you have any other questions about your Firefox OS device.
Thanks,
- Ralph
</blockquote>
Hi,
What ZTE meant was changing carriers not just sim card. I can't do that for another 1.5 years. The reason they said is because the phone seemed fine for a while when using another carrier. Sadly, the SIM is fine since another SIM card from the same carrier does the same. Both are working fine on Android Phones.

Pearl 8110 shuts down and reloads during calls

Hi
I bought a blackberry 8110 from ebay, everything with the phone looks ok but it cuts off and reloads during calls. I updated the software from version 4.2 to 4.5, but the problem wasn't solved. Now I'm thinking its the battery but I need your opinion before I buy another battery.
Thank you

Hi mlu-sean,
Welcome to BlackBerry Support Community Forums.
Try backing up your device via the BlackBerry Desktop Software and performing a clean reload of your device software. http://bbry.lv/bpv7DT
Make sure to test for the issue before restoring any data from your backup file.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Bluetooth connectivity and beeping during calls after lollipop update

After this update I have had problems with the bluetooth audio cutting out. Also during calls a strange beeping sound can be heard every minute. Is anyone else having this issue?

Couple of other ideas looking around on the web, try hardwired headphones and see if the problem does indeed go away (narrows it down to bluetooth only), if you are playing back from sd card try moving to phone to see if that solves it (some people have seen similar issues with failing micro sd cards). You aren't by chance getting notifications when the drop outs happen? It could be muting the audio to playback notification but not playing back the notification (just a thought). Try different apps for playback assuming you are listening to music.
BTW how do you like the Gear circle (other than the cutout issue)?

8320 reboots during calls

I have a 8320 that is unlocked, was originally t-mobile, now using an ATT SIM. The phone worked perfectly for over a year on t-mobile. I didn't use the phone for about 6 months (sat in a box). I decided to use my ATT SIM from a work phone, and had the phone unlocked. Now, during almost every call, the phone will shut down and reboot. I get the red light then the hourglass in the screen, and a couple of minutes later, it is up and running.
Troubleshooting to date is:
Installed latest OS from BlackBerry
Checked battery - the reboot will happen on battery or while plugged in. No evidence of water damage
Checked memory - good
Checked with unlock provider - they have never had any problem.
I have tried the SIM in my iPhone and had no problem
I have seen lots of posts with similar problems, but no solutions. The device is out of warranty and the phone isn't from my current service provider. I am now sitting with a device that does not work and no other options. Any help would be greatly appreciated.

Hi,
Try another BB enabled SIM in the Troublesome BB.
If you still have the same issue then its a faulty Handset. Contact the carrier for a replacement/repair.
Checked out my Blackberry FAQ's and Links to Needed Articles here
http://darkeen.homelinux.com/index.php/Blackberryfaq

Updating servers and reboot during MW

Hi.
Our main goal is to install software updates en reboot the server only during Maintenance Windows (MW) I’ve been searching the Internet but i’m stuck.
Software updates are installing and servers are waiting for reboot.
The setting are;Collection: MW is set to 03-04 hour
Server: Business hours are from 05-22 hour and software center\computer maintenance\only suspend software center ….ticked on
GPO: Automatic updates are disabled
ADR: tab User Experience\Deadline behavior\software installation ticked on and Device restart behavior\Supress Servers ticked on
TIA.
Thanks, Harmen

Hi.
Our main goal is to install software updates en reboot the server only during Maintenance Windows (MW)
Thanks, Harmen
If you want to install and reboot only during MW, then this is how your user experience tab should look like on a deployment:
If you want to install outside of MW but only reboot within MW, then check "Software Update Installation" checkbox. Your updates would then install on deadline you have scheduled (which might be outside of MW) but reboot only within MW you have
set.

3GS reboots during calls after os4 upgrade

This is a bit different from screens staying black at the end of a call that I've seen mentioned.
Every call I make, after about 3 minutes the phone turns off and reboots. This would be a great moneysaving feature if was on Pay As You Talk! But I now can't use the phone for calls and have to warn people who call me that we'll get cut off

I too am seeing this. I'm on o2. This isn't happening for every call and this hasn't been happening for me consistently. Also, this can happen at any point in a call, I've been on a call for 1/2 hour before it resets.
Possibly this might happen when I get to a point of bad reception.

Ipod Classic 160GB crashes and reboots during Video playback :S

I recently brought a film on itunes and have watched it on my computer and it works fine, i have also tested its playback on 4 other video ipods but when i try to watch it on my ipod classic it crashes and reboots after about 20 minutes, however i can click the select button and get past the crashing point and the film plays fine. Can anybody help? i also have 4 other films on there that work fine its just this certain point on the movie.
My ipod is an ipod classic 160GB bought on the 14th January 2011

just wondering if you were using Vista ( Nvidia drivers) with SATA drives. I have the same problem as you and i thought it was a problem with my ipod touch. My friend has an ipod touch as well and i tried to copy the file to his ipod and the same problem occurred. played for about 10 minutes and crashed both ipods, sometimes back to menu other times reboots to apple symbol.
I Copied the same file to my ipod classic and there were no problems. played perfectly on my other ipod. I tried 3 other files and same thing happened everytime. I cant get any video files to play without rebooting the ipod touch.
I then copied the same files to my laptop with an IDE hard drive running XP and it works perfectly.
Dont know why or how i can fix the problem but i now only transfer video files on my laptop instead of my brand new super fast Vista PC. could be the PC is trying to transfer files too quickly and they become corrupted somehow. Its very annoying but the workaround works until a solution is found.
hope this helps

IOS 8/8.0.2 reboots during call and then comes back

I have seen issues with IOS 8 and 8.0.2 on both an iPhone 5 and an iPhone 6 where I am on a conference call, and the phone goes dead to the white screen with the black apple, then 30 seconds later, the phone comes back on with the previous call still connected. Has anyone else seen this issue? I have seen this issue at least once a day since upgrading to IOS 8 on my iPhone 5 and my receipt of my iPhone 6 and then subsequently on IOS 8.0.2

This very same thing everyone here has posted about happened to me this very evening. I only found this post by googling around as there's not too much.
I have a 5c, my friend has a 5s. Both of us running 8.02. During a call, first my phone cut out like the call dropped and I see the Apple logo on screen like its rebooting. I'm like "what the..." but before I can even say the word, my phone is back at the home screen and my call resumes. Even the call time counter kept counting like the call never dropped. But I could not here my friend though he said he could still hear me.
The strange part of this is within a couple of minutes the exact same thing happened to my friend on his phone during our same call. Apple logo, screen reboot, he can't hear me for like 5 seconds and then all is normal again. He suspects the NSA; I say loose bolts in the plumbing.
Man, I hope this 8.1 update fixes this. And Safari, which runs awful. And the Camera Roll. And the...

Dropped Frames and "freezing" during capture

I'm having a problem capturing video....it mostly captures although I get "freezes" where the sound continues but the video frames are dropped. If I leave the Quit capture upon dropped frames I can't capture too much as the freezing happens about every 15 to 30 seconds. Any help?
I'm having the same problems on both computers and also when I try to set the hard drive as the scratch as opposed to my external HD.
MacBook Pro (INtel)
iMac (800mhz)
FCE 2.0
Thanks in advance
Zack

Tom,
Same issue here. I've been capturing well with the same setup months ago and have not had this issue until now.
The video "freezing" happens during writing to the hard disk during capture. Using Activity Monitor, you can see 2 second "bursts" of data written to disk every 30 seconds. The video in the capture window freezes during these bursts.
Activity Monitor also shows zero bytes of data being written to disk in between the bursts, but that doesn't seem right, because I know the video is being captured. (You can play it back in FCE)
The freezing can be seen during capture and when playing the captured clip in the viewer. Audio playback is fine.
I tried 3 different Scratch Disk settings with the same results:
External USB 2.0
External FW 800
Internal disk on PowerMac
Dual 2.0 GHz G5 (Cheese-Grater) PowerMac
10.4.9
FCE HD 3.0
QT Pro 7.1.5
3.5 GB Ram (100% set for FCE in settings)
FCE Easy Setup for DV Converter
Canopus ADVC110 converter
Analog VCR input into Canopus (Default settings on Canopus)
Firewire connection from Canopus to Mac
I couldn't find anything in your FCE Editing Workshop book that could help with this either. Everything worked fine a few months ago.
Dual 2Ghz G5, 12" G4 iBook, Sunflower iMac Mac OS X (10.4.9)

E61i reboots during calls

My newly bought e61i tends to crash at almost once a day while in the middle of a call.
The backlight would go off and I would see the nokia logo 'float' at the bottom of the screen before the backlight comes on again.
Then, despite it being a reboot, it does not require me to key in my PIN number.
Very strange and irritating, especially when clients or loved ones on the line.
Any ideas how this can be resolved?
Firmware: Original. Not updated because I read somewhere that it causes more problems.
Place of purchase: Malaysia from nokia authorised dealer (Avaxx)

Gosh. This faulty e61i must have wasted a lot of your time. That must have sucked. I emailed Nokia support and they never replied. That sucked too. Thankss for reply.

Acrobat 9 Pro blue-screens during installation (registration) and bluescreens during uninstall

I tried to install Acrobat 9 Pro. It got to the registration part and Acrobat crashed my Win 7 laptop with a PAGE_FAULT_IN_NONPAGED_AREA (error 0x50 on bluescreen). Attempting to uninstall results in the same error/blue screen. I can do an installation repair, which does complete, but when I start Adobe Acrobat, it still brings up Acrobat and seems to work fine only for about 10 seconds beore it bluescreens with the same error. I still cannot uninstall or run Acrobat without bluescreening. I can run Adobe Reader, Photoshop CS5, Lightroom 4 and do anything I usually do on my laptop without any issues. However, if I try to use Acrobat, it crashes my laptop every time. I once was able to bring up the option to update the software and I saw some message about registration or something being disabled, but it crashed immediately so I was unable to fully read the message.

What has happened is that you have selected to install the PDF add-on which will not run alongside your version of Acrobat. Without warning, the installation just uninstalls the incompatible full version of Acrobat.
I don't think you can just uninstall the add-on so you will need to uninstall Rh, reinstall Acrobat 9 then reinstall Rh deselecting the add-on.
I am not sure that will be entirely trouble free as Word has to be compatible with Acrobat and I don't know if your two versions are.
It's not a way of forcing you to upgrade but I do agree it could be handled better.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Phone rebooted during call

Got the phone yesterday... Was out for a nice walk this moring talking to my mom on the phone and she went silent - looked down at the phone and the AT&T logo was there - the phone was rebooting. Had been on the phone for maybe 7-8 minutes and it had been up to my ear the whole time, so it wasn't a combination of anything on my part.
Only seen this once so hopeful it's a once off.
Nice phone Nokia - please stick to it and work out the kinks. Giving this phone a shot and I'm a potential long-term customer (have had nokia phones in the past when I lived in Europe)

Hi there,
First please backup your data and perform a soft reset on your phone (press and hold the volume down and power buttons) until the phone reboots and see if that solves your problem. If not, then perform a hard reset, as detailed here: http://mynokiablog.com/2011/11/08/how-to-hard-reset-nokia-wps-three-finger-restart/
There have been a fair share of problems reported of the AT&T variants of the 920, and a reset has often solved it. Try it and report back to us how it goes.
Failing the hard resets working, you will need to take your 920 back to your point of purchase, or if they are not helpful, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate your nearest Nokia Care point: http://nokia.com/support

7985 Reboots During Call

I have 2-3 7985's that when the user places an audio call, they will reboot about 5 secs into the audio call. They are all running the same load 4.2.1.
Anyone else seen this?

Try these steps.
H323: On the matching voip dial-peer(s), configure:
'no vad'
or
'rtp payload-type comfort-noise 13'
MGCP: Set CCM Service parameter: 'Silence Suppression with Gateways" = False

Curve 8900 restarts during call

Onto my second curve 8900 from Hong Kong in a week after the first had a power leakage from motherboard (fried travel charger and ran down battery really quickly) and reset during calls. Got a replacement but it's also restarting during calls. Any ideas? Could it be a software issue?

Did you try reset of device by pulling the battery out?
I think you would be better of by replacing the device.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

7925G drops registration and reboots during call

Similar Messages

Maybe you are looking for