Activation of Planning Profile

Hi Experts!!
We are looking to use the SAP BW-BPS planning profile CP: Deal Master for Trade Promotions (4TPM0010). This planning profile includes the Deal Master Promotions (4TPM9540) planning level, as well as the Deal Master Promotions (4TPM9541) planning layout.
As this is standard one,but we are unable to look in planning profile.
Could you please help me for activation such kind of planning profile so that we can use it as existing one.
Thanks in anticipation.
Surendra

Hi Siva,
I guess this is related to your other query. As mentioned there take a look at Note 1331066 which is part of SCM 7.0 SP 4.
One easy way to determine the relevant notes by each application area is to check the Support Pack link as below
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/spat/index.htm?sp1=SAPKY70004
You can then open each application area check for relevant notes for your issue. Use 70003, 70002 and 70001 to see the notes bundled in SP3, 2 and 1 respectively for SCM 7.0. The latest SP available for SCM 7.0 is SP5.
Hope this helps.
Somnath
Edited by: Somnath Manna on Aug 25, 2009 2:41 PM

Similar Messages

Transport of planning layouts and planning profiles (CO - Cost Center Acc.)

Dear Experts,
I am new to SAP CO and would like to transport new planning layouts and planning profiles. Therefore I clicked on transport and the following customizing task is added to my transport request:
IMG Activity Create Planning Layouts for Cost Element Planning
-> ke34
->
CEFORMC
CEFORMF
CEFORMS
CEFORMT
CEFORMV
CEFORMW
CEPRINT
CESETS
TKEBS
TKEP1
TKEP2
TKES1
TKES2
TKES4
TKES5
TKESK
The transport worked without error.
Unfortunately none of the layouts arrives in test environment.
Do you have any idea of what I could have forgotten?
Thanks a lot!!
Thomas

After you have released the transport request, the objects of the request are available in the target system and the target clients. If you want to carry out a client copy within the same system, proceed as follows:
       1.      Log onto the system in the desired target client.
       2.      Start the client copy (Tools > Administration > Administration > Client Administration > Special Functions > Copy Transport Request; transaction SCC1) and enter the source client and the number of the transport request.
       3.      Then start importing the objects.

Cost element/activity type planning upload

Hi,
When doing the cost element/activity type planning upload via KP06, can I assign only one characteristic in the element definition level? Because I want to put in the excel upload layout the cost elements, cost centers and activity types. But ECC 6.0 is allowing only one characteristic in the element definition level. Has anyone encountered this problem?
Thanks and best regards,
Thess

Hello,
This is controlled by planning are in your planning profile. You need to use "Cost ctrs: Cost element/activity inputs" planning area for this purpose.
Hope you are conversant with Integrated excel upload.
To do integrated excel upload of cost center plan data.
IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Manual Planning User Defined Layouts - Create your own layout or copy from standard layout and change it.
IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Define User Defined Planner Profiles
Copy the SAPALL to ZSAPALL. You cannot change SAPALL as it is standard.
In ZSAPALL planner profile, select proper planning area and enter your layout.
Tick Integrate Excel.
Once the popup for KP06 comes, you need enter the data and save it. It would generate the file name.
With the same file name you need upload the plan data by using KP06.
In KP06
Extras ==> Excel Planning ==> Upload
Select the file as prepared in accordance with format at the time of generating the file name.
Hope this solves your problem.
Please let me know if you need futher help.
Regards,
Ravi

Error while creating Rough cut planning profile

Facing the following error while creating rough cut planning profile (mc35) in SOP for product group. "Work center x plant y does not exist for task list type 3". pls advise- do i need to create tsk list for product group? pls advise with tcode to be used.

pls check the (task list ) usage you have maintained in the Work center.
In OP45 , pls ensure that for the usage ,
task list type 3 (Rough cut planning profile) is included.
If it is not included there , pls include the TL type 3 for your usage and now the prob will get solved.
Regards.,
Sheik

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

How can we define time stamp in rough cut planning profile

Hi all
There is no time stamp(From date to date) in Rough cut planning profile and it is just time span (0-5 ,5-10,... workdays) . If I have different capacity for my resource in different intervals how should I define it so that in planning table it can take it to account and show me requirement versus avalilable capacity acoordingly.Note that we are working with repetitive plannig and our resources are lines which have different production rate between each interval.
Regards
Babak Bolourchi

Dear,
In REM you can use planning table through MF50 for your requirement.
For time stamp in rough cut planning profile please refer my reply from this link,
[Rough cut planning|Rough cut planning profile]
[Link 2|https://forums.sdn.sap.com/click.jspa?searchID=25236413&messageID=6404039]
Hope it will help you.
Regards,
R.Brahmankar

Rough cut planning profile

Hi Gurus,
Our scenario is we have two plants.The sales orders and the PIRs will be created in the Plant 1 and these requirements will be transferred as Stock transport orders to plant 2(with special procurement key) .All the materials will be manufactured in plant2.BOMs and routings are maintained in Plant 2.
In this case if i want to maintain the rought cut planning profile , how can i map the scenario.
Please help me in this.
Thanks in advance,
Ravi

Hi Krishna,
There are two plants.
Plant 1
Plant 2
We will be creating PIRs in Plant 1.There is a special procurement key maintained for material which will say stock transfer from plant 2.
The below are the steps:
1. Create PIRs in the plant1.
2. Run MRP
3. STO req. will be created in Plant 1 against the PIRs.
4. As the special procurement key is maintained in material master Planned orders will be generated in plant 2 against these STOs from plant1.And production will be done in plant 2.
So, now if i want to do rough cut plannig profile how can i proceed.
Thanks,
Ravi

Rough Cut Planning Profile MC35

Hi all,
I was trying to check capacity rough cut planning in product group level, so i have to make the RCPP (ROugh Cut Planning Profile) in that product group level using MC35,
i still confuse with the time span, base qty and the value in resource table at MC35, what is the connection between these 3 value??
regards,
MARUFAT

Hi,
i still confuse with the time span and the resource table in RCCP MC35
i enter the time span with value 1, and the resource table column will give value 1,2,3,...
and when i enter the time span with 5, the resource table column will give value 0-5, 6-10, ...
if i enter the base qty is 5000 to, with time span value 1, and in resource table i enter for column 1 with value 40 and column 2 with value 50, what is the meaning of that? ( the Resource table use work center with UOM HR )
regards,
MARUFAT

Rough Cut Planning Profile-by Capacity category

Hai,
I am creating Rough Cut Planning Profiles in ECC6.0 for use in Standad SOP (S076). In MC35, I don't see a place where I can enter by Work center category- like I want both Machine and Labour categories as I have different times for each category.
{ when I view the rough-cut capacity situation in MC82, system displays both categroies, but it is based on only the hours I maintained for one of the categories- how do I maintain for both categories?}
Thank you in advance:)
Sonali
Edited by: Sonali on Apr 28, 2009 3:05 PM

Hello Sonali,
Rough cut capacity planning is used only for bottle neck resources.Analyze your process and you will come to know for the product group or material which category or machine is bottleneck.
Create a rought cut planning profile for a production line or Workcenter or PRT or Cost(Relative cost not product cost).
PS:Roughtcut capcity planning should not be used for all the workcenters.
Thanks,
Raj

Display error message in Campaigns - Planning profile templates

Hi experts,
I am facing an issue while trying to display error message in plannign profile template for campaigns.
Issue is that even though i am able to add the error message to the parent campaign message container, it is not being displayed on the UI screen message area(refresh is not happening) until the next screen refresh happens through another event like change of planning profile drop down / f2 pop up being closed on the message area etc.
I need to display the error message as soon as it gets added in the global message container.Is there any way that i can refresh the UI from this method which would display my error message? I think round trip might work here
I am tryign to add the message in the method IF_FLEX_DATA_PROVIDER~MODIFY_DATA of component KFPED_LAYOUT .
But it doesn't get reflected in the message area.
Appreciate a lot if anybody can help me out here.
Thanks
Swapna.

Closing the thread. Resolved myself .
Thanks.
Swapna V.

Activating C&V Profile in Controlling Area Error URGENT

Hi Experts,
I'm having problems in activating C&V Profile. I have done all the set up in FI, CO, and PCA. They are all consistent but when i am activating it says the following errors:
Create a results analysis version for valuation view ID01
Version 0 in controlling area ID01 does not allow variance calculation
Actual data already posted in controlling area ID01
What should i do?
Please help me.

Hi
Please check if you have define the version in IMG
Controlling->General Controlling->Multiple Valuation Approaches/Transfer Prices->Basic Settings->Create Versions for Valuation Methods->
If yes
Then in transaction code OKG9 Check the same version if its not reflecting create the same for controlling area ID01 for (WIP)
If the answer if helpful kindly assign points
Thanks & Regards
Mahesh

Changing a cycle in an active maintenance plan

Hello All,
I received a request from an end user to make a change to an active maintenance plan. The plan has a 3mo cycle. The users would like to first, generate a call for March 2011 and second, to change this to a an annual cycle. I am able to use the 'Restart in Cycle' to generate a call in March, unfortunately, I am not able to figure out how to change the cycle from 3mo to 12mo. Is it possible for to change the plan cycle from 3mo to 12mo once the plan is started? The header section in IP10 is grayed out.
At the moment, it looks as though I need to create a new maintenance plan to accommodate the request.
Thanks in advance.
Anna

Mahee,
Appreciate your quick response. This was a strategy plan and I was able to make the changes as you had suggested, through the task list.
Thank you so much for your help!
-Anna
Edited by: Anna Vuong on Feb 24, 2011 10:08 PM

Issues in retrieving the Planning profiles in CRM from BW while doing CRM-BI Integration

Dear Folks,
We are in the process of doing the SAP CRM & BI Integration wrt Trade Promotion Mangement.
For testing purposes, we tried to create a planning profile in BPS end i.e BW SEM system & trying to retrieve it from the CRM system using the below navigation.
SPRO-->CRM--> Define Transaction types--> ZBPD is the transaction type we had created.
And in Customizing Header level, in SEM Planning tab, trying to retrieve the Planning profile created in SAP SEM-BW.
Tried to search in both ways i.e prefixing the 'zprofile' with /prf/zprofile but still CRM system is not reading the same from BW system.
What ever the pre-requisites that are needed to be followed before doing all these, the same had been done in terms of creating the RFC Connections etc but still unable to retrieve the same.
And also not finding any standard content in the form of Planning areas & profiles at BW end after installing the SEM BW component add on in BW system.
Could you pls let us know what we are missing here.
Thanks in advance.

I meet the same problem, any solution?

GLPLADM Planning profile for new gl - default parameters

i have copied the existing SAPFAGL profile and the layouts belonging to them and created a new profile with the same layouts. i am trying to set default parameters in order to get file description for each of the planning layout. i am able to do in our sandbox but not in the development client. the difference between two clients are sandbox is an upgraded version to 6.0 and the development client is a new box loaded with ECC 6.0. kindly help me on this.i would need to have the file description in order to do a excel planning upload. my excel planning upload works fine for the cost center profile and the layouts. i am having issue with the new g/l planning where the planning is done at the profit center and g/l Account

no errors no issues.. usually when we click on the default parameters it takes us to the screen showing the layout and then we key in data and the excel sheet gets loaded . we key in data or we can save the file description , it is automatically generated and the file description generated by the system gets populated in the file description field of the planning layout in the planning profile. in my case, when i click the default parameters, it doesnt go any further, and no warning or erro messages are issued. the same default parameters take me to the layout screen when i click the default parameters from the Cost center planning profile. i am not able to resolve this, asked many people but of no use. hope you understand my issue.

BAPI for ""Change Cost Element / Activity Input Planning ""

Hi
Is there any BAPI for ""Change Cost Element / Activity Input Planning "" ( TC KP06) as there is BDC for that but is goes through lot of steps . ( TC OKKS, KP04, KP06 )
So if any one know the BAPI for the same please let me know, and if possible send me your code also it will be really help full.
Regards

o   OBJECT_INDEX - Index uniquely identifying the row and thus the
    object. The index must be greater than zero and may only appear once
    in the table. If the index does not exist in INDEXSTRUCTURE, the row
    is ignored.
o   COSTCENTER    - Cost center that includes the activity.
o   ACTTYPE       - Activity type that includes the activity. You must
    fill this together with COSTCENTER. You only need it for an activity
    input that is activity-dependent.
o   CO_BUSPROC - Business process that includes the activity.
o   ORDERID       - Order that includes the activity.
o   WBS_ELEMENT - WBS element that includes the activity
You may fill one object only,for example COSTCENTER, CO_BUSPROC,
ORDERID, or WBS_ELEMENT.

Activation of Planning Profile

Similar Messages

Maybe you are looking for