Actualizing BPR for ECC 6.0

Hello!
We are using SolMan 4.0 SP-12 for our ECC 6.0 implementation. Since most of the BPR content pertains to 4.6C - how do we actualize the BPR to make it current for ECC 6.0 ?
Thanks.
Mani

hi Mani,
have you downloaded the lastest support pack for the ST-ICO component? That's how you get the lastest BPR content.
Support Packages and Patches" -> SAP Technology Components" SAP SOLUTION MANAGER" -> SAP SOLUTION MANAGER 4.0"-> Entry by Component" SAP Solution Manager -> ST-ICO 150_700
regards,
Jason

Similar Messages

  • Solution manager BPR for ECC EHP4

    Hi All,
    Is there a business process repository that includes EHP4 functionality?
    In my company we want to build a template for QM processes, with EHP4 there is some new functionality offered and we would like to pull this information from the BPR into our template project to then evaluate with the business if this would be useful or not.
    Thanks in advance,
    Peter

    Hi Peter,
    You can check all the up-to-date content of the BPR structure delivered by ST-ICO in the following URL:
    https://implementationcontent.sap.com/bpr
    Kind regards,
    Fabricius

  • Data Transfer Tool for ECC 6.0

    Hi All,
         Good Morning. I would like to know if anybody has had the opportunity to use this tool in ECC 6.0. If so, where did you obtain the software related to this tool?
    Please Advise.
    Kind Regards,
    Daniel A. La Mendola

    I am actually looking for where the program resides and if it exists for ECC 6.0.  I have found tons of documentation, but nothing on how to obtain the tool itself.
    If anybody can assist me in the endeavor it would be greatly appreciated.
    Thanks again for you help

  • Transfer rules are not exist for ECC Quality source system in BI Dev

    Hi,
    I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data  I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
    When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
    only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
    Regards,
    chandra

    Hi Fayzrakhmanov
    Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
    The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
    Help on this would be appreciated.
    Thanks

  • Enter a business location for ECC 6 EHP 5 (Taiwan)

    Hi,
    While releasing the billing doc to accounting we are getting the error Enter a business location
    Message no. F5A192
    We are working on ECC6 EHP 5 and this requirement is for Taiwan.
    I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
    Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
    Or any other suggestions.
    Thanks & Regards,
    Student.

    Hi,
    Please check the below thread.
    Error Enter a Business Location for Korea
    Regards,
    P Gomatheeswaran

  • Replication Issue for ECC BP to CRM BP

    Hello Experts,
    I am trying to Create a BP in ECC with transaction BP, but whenever i save the BP in ECC, the BDOC gets stuck in CRM with the error message that 'Grouping CUBP does not exist',
    Everything was working fine before, but recently we had created a copy of Account Group 001 for ECC customer for a Z accoutn group, we made all the required settings in ECC in transaction PIDE and then ran the inital load 'DNL_CUST_KTOKD' the new account group did come over to CRM in table CRMC_T077D and the account group is working fine, the customers created in ECC are getting replicated to CRM, but now the BP created in ECC does not gets replicated to CRM and give the above stated error message in the BDOC.
    PLEASE HELP!!

    Hello Shoaib ,
    In the CRM as well as ECC system in the customising SPRO :
    Cross-Application Components   >SAP Business Partner
    Business Partner   >Basic Settings
    Number Ranges and Groupings   > Define Groups and Assign Numbers Ranges
        >  CUBP Grouping could be missing in any one of the systems. Could you please check this.
    Thanks & regards,
    Krishnen

  • ST-PI and ST-A/PI Plug-Ins is it neccessary  for ECC 6.0 ?

    Hi Friends,
    Please guide me,
    In Early Watch Alert report, it recommends ST-PI and ST-A/PI Plug-Ins for ECC 6.0.
    Is this plug-ins really needed for ECC or not , if needed where( which scenario ) they are useful.
    Thanks ,
    VKP.

    Hi,
    I checked in our server i got this result
    No.   Missing addon/ transport / note
    1. [Note 69455  ]      Addon ST-A/PI 01M_ECC600
    2. [Note 69455  ]      ST-A/PI Addon Supportpackage SP01
    3. [Note 69455  ]      Proc. after addon impl.
    4. [Note 539977  ]     Addon ST-PI 2008_1_700
    5. [Note 539977  ]     ST-PI Support Packages
    6. [Note 12103  ]      Collectors and TCOLL
    Successfully implemented addons/ transports/ notes
    7. [Note 207223  ]   EWAlert setup
    1 to 6 add ons are they compulsory or 7 ( EW setup ) is ok
    Thanks,
    VKP.

  • How to create a PDF that prints at actual size for all printers

    I create printable educational products for teachers and homeschoolers.  I need to be able to make some printable PDFs that have cards set to a specific dimension, say 3" x 3".  When I create PDFs in InDesign and print them, the printer tends to shrink the PDF down.  This happens even when I set the Page Scaling to None.  But regardless of what my printer does, I would like to be able to create PDFs that print at actual size for anyone who purchases my products.  How can this be done?  Can I change the settings when I create the PDF?  Do I need to includes special instructions with my products?  Thanks so much for your help.

    You can specify the printing process in the PDF for Acrobat and Reader, open the PDF in Acrobat > file properties (right mouse click on the page) and in the extended tab (the most right tab) you can set printing not to scale for that PDF as default setting.

  • Data Transfer Toolbox for ECC 6.0

    I am on ECC 6.0 and I am trying to install the data transfer toolbox (DTT) for HCM.  I installed the ERP05V4.SAR file (which is in the 600-ERP-DATA folder), but there are no DTT tcodes.  A colleague of mine told me he has used this in earlier versions of SAP (ECC 5.0) and he installed BPERPVD.SAR (which is in the 500-ERP-DATA folder) and the DTT was installed.   So it seems that this does not exist for ECC 6.0, but we need it so I am looking for help!
    I downloaded all of these files from OSS-downloads-SAP installations and upgrades-Enter by application group-SAP best practices-Best practices for my SAP all in one-SAP BP for HCM-HCM V1.500-installation.
    Thanks
    Mike

    Hi Michael,
    Were you able to get DTT installed for ECC 6.0? We are also, in the similar situation, trying to get DTT loaded in ECC 6.0.
    Thanks.

  • How to install the ADS for ECC 6.0?

    Hello All,
    I have few questions before I can start with my problem
    1) Is the ADS a part of the WAS for ECC 6.0 ?
    2) Is any Ehp available for installing the ADS separately?
    My requirement is to have a PDF application run in ECC 6.0 . I have no idea about the architecture like weather it includes the ADS as we have for Java WAS 6.0 SP 14.
    What my team is doing is deploying the application in the Java WAS currently. But they need to deploy it to the same server i.e. ECC 6.0.
    I would like to know what is the process to install the ADS in ECC 6.0. And if it is already installed then how to configure that.
    Let me know if you have any questions. Looking forward to you.
    Regards
    DK

    Hi Dipendra,
                         For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT    user id creation and roles assignment and RFC destination creation etc..          
    Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
    https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
    You can start by read the note 736902 to get the credentials for the ADS.
    Hope this answers your question.
    Thanks,
    Greetson

  • Line item actuals report for Profit center group

    I am looking for a Line Item Actuals report for a Profit Center Group  on the lines of KSB 1 report for Cost center /groups.
    I tried report "KE5Z but only profit centers can be selected, not profit center groups.
    Any help on this

    Try out the following report
    S_ALR_87013326 - Profit Center Group: Plan/Actual/Variance
    Call up Actual line items, here we go you would get the profit center group reports in similar lines as KSB1.
    Award points so as to say thanks.
    Regards,
    Suraj

  • How to analyse actual cost for each operation in Process/Production Order?

    Hi all,
    IN SAP, I know that we can analyze plan cost for Operation in Process Order/ Production Order.
    However, I can not analyze Actual cost for Operation .
    I know the object when I good issue material is ORDER, not OPERATION.
    But, as requirement of users, they want to analyze actual cost for each Operation.
    CAn SAP do this analyze?
    If Yes, What should I do in SAP to have this reports?
    THanks in advance,
    Emily Nguyen

    Hi Emily,
    as I see from one other message that you're using material ledger. Then your expectation is apparently to also see the actual costs of materials in your production order by operation.
    This is not supported. Actual material costs are handed up in material ledger multi-level settlement from one material to the next, bypassing the production orders.
    That means the production order will always contain the material costs valuated at plan price, not at actual price.
    For activity prices that might be better, when you revalue the orders at actual activity prices with CON2. But even there I am not sure that it will always be assigned correctly to the operations.
    There is currently an enhancement in development, the operation level costing. But that will affect more the planned cost side not the actuals. Might be interesting to learn more about your requirements and the use case behind.
    best regards,
                      Udo

  • What is the difference in SAPS requirement for ECC 6.0 (No EhP)  vs ECC 6.7 (EhP 7)?

    Hi Team,
    Hope you are doing well, Can you please explain the below points.
    1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP)  vs ECC 6.7 (EhP 7)?
    2)     What is the split of SAPS between Core and RAM?
    Thanks in advance.

    Hi Deepak,
    We are not partner/ customer with SAP, so don't have access to tools.
    Can you please give theoretical idea about
    1)      What is the difference in SAPS requirement for ECC 6.0 (No EhP)  vs ECC 6.7 (EhP 7)?
    2)     What is the split of SAPS between Core and RAM?
    Thank you,
    Gopi Reddy

  • Capturing the Actual Responder for a notification sent to a Distribution List in Outlook

    Hello All,
    Morning , need some guidance on the issue mentioned below which we are currently facing.
    We had a requirement to send Oracle Workflow Notification to a Distribution List maintained within Microsoft Outlook Mail client/server. The email address of the users which are part of the DL would be setup in this DL . lets say this DL has the
    mailing address as : [email protected] which has 4 users in it let's say Oracle Apps FND users : A (email id - [email protected]), B (email id - [email protected]) , C(email id - [email protected]) , D (email id - [email protected]) with their respective email address . This email address within Oracle Apps would be linked at the FND User setup as well as in the HRMS Employee Setup --. Official details section
    For this we created a ad hoc role name : 'Role_abcd' as below , then set ad hoc role attribute as shown below ( in the display name and email address we specify the email address created for the Distribution List )
    wf_directory.createadhocrole
                                           (role_name                    => 'Role_abcd',
                                            role_display_name            => 'Role_abcd',
                                            notification_preference      => 'MAILATTH'
    wf_directory.setadhocroleattr
                                          (role_name                    => 'Role_abcd',
                                           display_name                 => '[email protected]',
                                           email_address                => '[email protected]',
                                           notification_preference      => 'MAILATTH'  );
    Finally we set the Notification Performer
    Item Attribute (Next_Approver) and assign the role name ('Role_abcd') created above to this performer :
    wf_engine.setitemattrtext (itemtype      => p_in_itemtype,
                                           itemkey       => p_in_itemkey,
                                           aname         => 'NEXT_APPROVER',
                                           avalue        => 'Role_abcd' );
    Now we are able to successfully send the workflow notifications to this Outlook DL and all the 4 users : A,B,C & D would get the same notification to their email address mentioned as a part of the DL.
    Issue :
    Now lets say user A Approves this notification from email notification itself using mail id : [email protected] , In this scenario the Responder name which is getting captured in the wf_notifications table is not consistent , sometimes it is getting populated as : email:[email protected] and sometimes as the value for the recipient role/original recipient itself : Role_abcd .This appears to be wrong
    Ideally this responder column in wf_notifications table should get populated as  ( email:[email protected] ) so that we could identify as to which person within the DL has responded to the notification.
    Could someone please help as to how this could be acheived (to identify the actual responder for workflow notification sent to a Outlook Distribution List
    Thanks

    The following is the criteria when responding notification from email.
    1. If there is no user/role exists for the email address from which the notification is responded, the responder column value will be in the form 'email:[email protected]'.
    2. If there is only one user/role exists for the email address, then responder column value will be populated with that particular user/role.
    3. If there are multiple user/roles with the same email address, then responder column value will be populated with the user in the following preference order
         PER -> FND_USR -> OTHERS
    What is the customer code lne.
    The fix mentioned in step3 was given in 12.1.3 only. The earlier versions have the responder column value will be in the form 'email:[email protected]' if there are multiple users exists for the same email address.

  • Scaling in rebates as for ECC 6.0

    Experts can you please tell how to make use of scaling functionality added in rebates for ECC 6.0 version,
    Pls tell by example how to apply scaling in rebates,from VBo1 to reflection of scaling in sales orders,practically not theoretically,
    how to group conditions in rebates while scaling,
    Pls tell step vise by example??
    I   need your help.

    HI,
    In se38 ..give ur program name.
    In menu Goto --> Documentation --> Change.
    and press save.
    Thanx
    bgan.

Maybe you are looking for