Additional component in Subcontracting

Hi,
I have a simple issue with the subcontracting scenario.
I have a material with its components maintained. If some time I dont have one componenet available with me and want to procure from vendor.
I want to create such a subcontracting order where I dont have one componenet and want to procure it from vendor through the assembly of subcomponents.
Can anybody please explain me how to get this scenario in SAP?
If ther is any configuration required then pls explain.
Thanks in advance.
Regards,
Ashish

Hi Ashish,
This is can be done in two ways.
1. If the sub-contracting vendor himself provides that component
In this case, add one more line item for that componentin the sub-contracting po with out item category L, and tick the SC vendor in the item details delivery tab, then do the gr for that component before doing GR for the assembly.
2. If you are procuring the component from a different vendor , then place a PO and give delivering address as of sub-contracting (SC) vendor, do GR that will be posted to stock at sub- contractor. Then you can do GR for the assembly.
There is no need to any customization, standard settings for sub-contracting will do. Check the automatic account determination settings for BSV, FRL and VBO in GBB.
Hope this helps you.
Regards
Dora.

Similar Messages

  • List of component in subcontracting scheduling agreement

    Hiiii
    I want to see list component in subcontracting scheduling agreement.
    I have checked in Item tab -Component.
    But both options are not available.
    Thanks in advance.

    HI,
    while maintaining the schedule lines (ME38) you will get the components tab.
    for more check this link
    http://help.sap.com/saphelp_ewm70/helpdata/en/43/5d6e03f8f9bd4b91be4a449a25ccfb/content.htm
    You can also refer these links
    Subcontracting through SA
    Subcontracting Scheduling Agreement????
    Edited by: redriver on Dec 2, 2011 7:32 AM

  • Round Requirement quantity of component for subcontracting

    Hello,
    I need to round a requirement quantity of component   in subcontracting PO automatically? So in MD04 it shows as rounded quantities not just the base on BOM cmponent quantity ( Only for component what we send to vendor not the kit we recieving back ).
    Any help will be appreciated!
    Best Regards,
    Owais
    Edited by: Owais on Jul 8, 2011 3:13 PM

    Hello,
    It just help planners to plan better.
    We already cofigured so the components gets pick at rounded value on WM side. Its just MM side, if we can round the value for subsequent requirements. (Component requirement QTY - ERFMG)
    Any Help!!!
    Thanks.

  • List Display of component in subcontracting Purchase order

    Hi experts
    I want to know is there any transaction by which i can see list display of component in subcontracting po.
    Regards
    Parkash

    What do you mean by list display?
    You can display it in the purchase order itself.
    If the normal table display is not good enough, then when in the Component Overview (you get there by pressing the BOM icon on Material Data TAB of the purchase order item), go to the menu:
    Component list --> Print
    and you get a list format.

  • Cannot download additional component

    i have follow all the instruction in here and erase the disk, but when i spent around 2 hours to try reintall the os x lion, its will says cant download additional component at the finishing time, can anyone help me on this?

    IvanDL wrote:
    i have follow all the instruction in here and erase the disk, but when i spent around 2 hours to try reintall the os x lion, its will says cant download additional component at the finishing time, can anyone help me on this?
    And those instructions were?
    Please detail ALL you have done so far in the way of troubleshooting other than erasing the disk?   Need this info to avoid the been there done that scenarios.

  • Automatic PR for non-stock BOM component for Subcontract PO

    Dear Guru,
    Can you any master please advice me on below question?
    We have a subcontract PO with the BOM component of non-stock, can i know if there is possible for those non-stock BOM component to generate a Purchase Requisition automatically, any existing configuration that we can do?
    Thank you very much,
    Regards
    Chee Wee

    Hi,
    You can use Material Type "NLAG" for Non-stock materials.
    Non stock materials cannot be stored, right, hence the name non-stock.
    Non-stock material includes materials that are not managed on an inventory basis (for example, small parts such as nails) though physically in stock.
    You can create a BOM which contains an NLAG item or directly use in Production order also.
    item Category "N" So system will create the purchase requisition when there is requirement.
    We receive the non stock material using movement type 101. upon receiving the material will be consumed.
    Please refer link below for better understanding.
    BOM explosion in MRP for non-stock material
    What  is use of  Item Category N(non-stock item) in BOM creation
    Believe this could help your queries. TQ
    rgds,
    nanthakumar

  • Preventing additional component consumption after final confirm in PM Order

    Hi,
    I am trying to block the consumption of additional components after the final confirmation in a PM order, this is causing erroneous component consp. especially in orders with multiple operations.
    The user may choose a confirmed operation while recording a component, system gives an error but it does not prevent the recording of that component, I want the users to get an error and stop there in such a case.
    I hope I made myself clear, thanks in advance
    IW32 Screen: https://picasaweb.google.com/koray.tulumen/Paylasacaklarim#5707123654338971234

    OK once more I thought I should add screens to better tell what I was trying to ask, I could not do that with the old forum layout. Anyways, could I get that result (in the screens) thru customization. There have been other comments relying on Orders' user statuses but with multiple operations they are not usable, every operation is confirmed individually and order status does either let or deny material movements thru the whole order (all operations)
    Here are the screens, thanks again.

  • Exit/BAdI for removing the component from subcontracting

    Hello Friends,
            My client has a very unusual requirement. For a subcontracting PO, they wish that only the finished product GR should be posted in MIGO and the 543 movement type which is happening for the component, shouldn't take place at the same time. Right now this is automatically happening.
              Is there a BADI or exit where we can control this? It's little urgent. Any small help will be appreciated.
    Thanks & Regards,
    Shaheen

    Hello friends,
            I know my question wasn't so straight. But I found a BAdI, where I could make the quantity of the component zero. But in MIGO, when you check the checkbox 'Item_OK', right at the bottom, it selects both the items. That is the finished product and its component. Is there someway that, only Finished product should be selected?
    Awaiting a miracle!
    Regards,
    Shaheen

  • Additional component needed

    I downloaded a movie file (.avi) and the video plays fine in quicktime, however, the audio is not playing. It said that I need and additional quicktime component that mine does not have. What component do I need to download?

    To Apple Discussions!
    A couple of solutions you can pick from:
    Open the file with QuickTime Player.
    Open the Movie Info window (Command-i).
    Note the name of the video codec used in the file.
    Do a Google.com search for codec name +Mac and download one appropriate for your OS and computer.
    Quit and relaunch QuickTime after installing the new codec.
    Try the file again.
    KB article - No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4)
    Another trick: If you have GarageBand installed, open it (maybe open a GarageBand document) and then quit out of the application.
    Install the following players: VLC Media Player and/or Perian (AVI and FLV support).
    TIP-You should Repair Permissions & restart:
    After installing and/or updating an OS (Operating System).
    *After installing software.*

  • Return ROH component for Subcontracting

    Hi All,
    Can anyone please guide me for the process of return Raw Material Components for Subcontracting, after the Goods Receipt of Finished Goods using MIGO.
    I have searched other threads which are using transactions J1IF01, J1IFQ and J1IF13.  Does anybody knows what the use for these transactions.
    Below is the current flow which I am using
    Create Subcontract Purchase Requisition - ME51N (item Category L)
    Create Subcontract Purchase Order - ME21N (Item Category L)
    Create Transfer Posting - ME2O
    Create Goods Receipt Document - MIGO
    Create Logistic Invoice Verification - MIRO.
    Thanks.

    Hi
    Actually use for subcontract adjustment we have to use t-Code MB04 enter the Delivery note number and PO number through which PO you are going to issue or receiving. Then select the component which component you are going to issue or receive .
    If you are going to receive the material from vendor means just enter the quantity for example 10 then post it it will reduce the stock of subcontractor
    If you are going to Issue  the material to  vendor means just enter the quantity for example  -10 with negative   then post it it will increase  the stock of subcontractor .
    Hope it will help you
    Regards
    Murugan

  • Component requirement date in subcontracting case

    Hello All,
    I have subcontracting PR having delivery date as 26.11.2010 and release date as 17.10.2010 and planned delivery time as 40 days. I change the PR release date to 10.10.2010 and it shows the requirement date for the components as same as 10.10.2010 which is my requirement. But when I convert PR to PO it is showing the component requirement date as 19.09.2010 and release and delivery date same as in PR. I want system should not change the component requirement date.
    How system is showing requirement date in PO as 19.09.2010? Is some one has any idea?
    Mayur Phalak

    Hi Mayur
    The requirement date for component in subcontract is Delivery date of the item minus planned delivery time -This is what SAP library says. But in your case I see a huge difference. Is your PR manually created or MRP generated?
    Have you maintained info record? Is planned delivery time is copied from info record? You can see planned delivery time in PO delivery tab. (find out which value has been copied).
    As per SAP standard when you press enter button in PO requirement date is redetermined based on planned delivery time in the PO delivery tab. So try giving Planned delivery time in PR or info record to adjust requirement date
    Write to me if you are not clear.
    Regards
    Antony

  • Subcontracting scrap, component consumption and service cost booked to vendor

    Hi,
    Our client is issuing 100 pieces of component "A" to subcontracting vendor to manufacture finished product "B". In MIGO, we are receiving finished product B and consumption is booked for 100 pieces of component A . Invoice is paid to the subcontracting vendor for the service cost. 
    Later, we realized finished product did not met the quality standards and decided to scrap out the finished product B. This is scrapped and stocked out using std. SAP using 551 mov type.  But the client want to charge scrap cost of finished product B, service cost (Job work cost) and the consumed components (A) of 100 pieces to subcontracting vendor. How to map this challenging scenario in Std. SAP.
    Regards,
    Sat

    No need to create subcontracting PO.
    Just create a standard PO, use material as FG (Material B as per your scenario)
    Enter the vendor (whom you want to charge for it)
    Let me explain the scenario:
    1. You have created a subcontracting PO for vendor X, FG material B and component A.
    Subcontracting service charge = Rs. 10.
    Price for Material B = Rs. 50
    Price for material A = 30.
    2. You have done GR.
    Now the FG material B is in your stock. (Here, you have done 551 movement type). Right ?
    Now just do not do 551 movement type. Leave the stock as it is.
    3. Then create a standard PO for material B and vendor X, give the price = (10+50+30) 90 and tick the return option in PO line item.
    4. Then do goods receipt. Movement type 161 will be automatic posted in system and stock will be consumed from your storage location.
    Then accounting entry will be
    Stock account Credit
    GR/IR account Debit.
    5. Then you can do credit memo to vendor from MIRO with the reference of this PO. Then the accounting entry will be
    GR/IR account Credit
    Vendor Account Debit.

  • Subcontracting with Vendor's own material.

    Hello
    I have a scenario wherein client sends a component for machining to Vendor and pays for the machining charges to the  Vendor.
    It happens that Subcontracting Vendor attaches say a nut bolt(hos own material,we have not provided the same) to the maxchine and gives it back.
    How this scenario can be mapped in Subcontracting cycle so that we can pay the Vendor for machining and nut bolt.
    Regards

    SAP procurement subcontract process maps exactly to your real subcontracting process.
    Prerequisite: turn the material to a BOM via CS01.
    1. ME21N create subcontracting PO
        On the PO screen, select Item caetegory "L     Subcontracting" to make the PO a subcontracting one.
    2. ME2O Send material components to vendor
        At this step, there'll no accounting document posted. Components sent are still your company's possesses.
    3. MIGO Goods receipt the expected material and sent components to storage location.
        Now, The sent components values will be transferred to the received material. Payable amount is the amount entered on the PO for their additional components and subcontracting service.
    Hope this helps,
    Best,

  • Subcontracting process where Material Supplied by vendor

    Hello Gurus,
    If anyone can provide me input how to map subcontracting scenario with subcontracting challan where some material is also added by vendor(Which is unknown at the time of raising purchase order).
    This additional componenet also attracts excise so how to take credit on top of this.
    I am mentioning what i am doing for this process and what issue i am getting
    1. I am sending component A for conversion from subcontracting vendor and receiving Z.For this i created one Subcon PO, transferred material A then created subcontracting challan.
    2. Now vendor is adding his material B.This part i am handling by inserting this material B in components of A(FG) by amending PO.In the same PO i maintained vendor supplied material as separate line item and its delivery i selected as delivered directly at vendor site.
    3. At the time of doing GR first i am making GR of vendor additional component(With capturing of excise invoice) then for the FG material with ref to subcontracting challan.
    4.
    4.Now when i am recociling sub con challan system is not considering the extra quantity (Recieved from Vendor) and system is not recognising and becuase of this i am not able to save the Challan
    SO need your expertise help if i am following process wrong as mentioned above or shall i try some another way to process this cycle
    Regard
    VIvek

    Create the BOM for Z (Finished)component (Raw component A)
    Create the sub contracting PO for Z componet
    Send A component through 541 with MB1B transaction
    While receiving finished goods in MIGO there is a option (Non-Ordered Material)click this option add vendor added meterial (B)  and receive along with finished goods.
    You can settle the same when you crete the invoice.
    Hope this would help.

  • Subcontract Reservations in RESB Table

    Hi Experts,
    I have reservations of child component in RESB table which are resulted from the parent component in Subcontracting Scheduling Agreement.
    All Delivery Schedules lines are completed (GR Made.) Still reservations exist for child component.
    Please suggest how to remove these reservations from RESB Table.
    Regards,
    Shravan.

    There is only one solution in this case if all efforts fail.
    You have to write an ABAP code which will flag the Final issue indicator in RESB table for perticular reservation. In this case you have to flag exact reservations and close that chapter not to be opened again. in future.
    Regards,
    Rahul Puranik.

Maybe you are looking for