AFS Arun

Hi All,
All my Arun settings are done. I have a release rule set for 100%. And when my item can not be fulfiiled with batch stock or in other words only partial batch stock is available, and wehn I run Arun, teh requirement gets resrved. Later, once I recieve complete batch stock adn I run arun, my order gets automatically released and changes to F status as it finds stock.
This part is all fine. But I have another scenario where we allocate Future stocks to a sales order. We do this by allocating a PO. When we run arun, it gets reserved with a PO, which is good. However, after we do the MIGO for the PO and have batch stock, I run arun again for the same order but it doesn't get automatically Fixed but instead, the system returns message saying that no open schedule lines found. I have reallocation rule set up in my Arun type and am using the reallocation rule 0001.
Any help would be appreciated.
Thanks & Regards,
Vidya Sagar

Hi Vidya Sagar,
i am having exactly the same issue as you. I am getting the same error message when trying to re-allocate the order from Status R to F.
No (open) schedule lines found.
Did you manage to find solution to this, if yes then kindly share it.
Thanks in advance.
S

Similar Messages

  • AFS ARUN Size Substitution Not Working As Expected

    Hi All,
    I need help with this. If any one of you have worked with AFS ARUN size substitution, kindly provide me with some details on how can I set it up. I am specially interested in setting up size substitution with two-dimensional grids.
    I have setup some examples but it does not work as expected.
    Here is a small example:
    Say I have a size 28/30, 28/32 .........29/30....
    What I want to achieve is that during ARUN if there is a shortage of stock in 28/30 then the remaining requirement qty should be confirmed from size 28/32.
    with my setup after 28/30 it goes into looking for stock in 29/30, which is what I do not want.
    Any inputs will be really appreciated.
    Thanks!!

    srdfrn wrote:
    Hi YOS,
    I tried importing a PCX image into CVI 2010 and then sizing the image to the control and didn't see the behavior you have been describing.  Would you mind posting an example (alongside an image file) that demonstrates this?
    Also, one thing I noticed is that PCX images appear to be quite dated.  Could upgrading them to a JPEG or PNG format be an option for you?
    Thanks,
    Stephanie R.
    National Instruments
    Stephanie, thanks for the reply.
    I am very sorry to state that I made a mistake.
    VAL_SIZE_TO_IMAGE indeed works.
    What fails to work is VAL_SIZE_TO_PICTURE. (Second option in Fit Mode attribute in control editing panel)
    I tried with JPEG and it's the same.
    I am attaching an example.(Load_Image.c & ONEP_3Trow_POS1.JPG)
    A panel with two picture rings.
    - SW_1 remains at the intended size and the loaded picture is not clear.
    - SW_2 will fit to picture size and looks OK.
    Appreciate your support,
    YOSsi Seter
    Attachments:
    Load_Image.c ‏2 KB
    ONEP_3Trow_POS1.JPG ‏4 KB

  • AFS ARun: sales order not been selected for the allocation run.

    Hi,
    I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
    When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
    For this process, I have set-up an Allocation type with
    1.     Requirement selection that does not exclude MTO/PTO orders
    2.     Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
    Can someone suggest what I may have missed?
    Regards,
    PD

    Hi Pankaj, I have same exact issue. How did you fix this ?
    Thanks,
    Mahesh

  • AFS ARUN substitution question

    Hellow!
    I need ARUN guru help.
    I can not manager ARUN substitution while material shortage.
    My example
    1. There is not material 1 in stock. No future recive in the system.
    2. A lot of material 2 in stock.
    3. material 2 is set as substitution manerial for material 1
    4. Sale manager insert material 1 in sale order and ATP confirm delyvery date as today + 30 (RLT=30).
    5. ARUN is configured to select requirements from -300 to + 7 days from today. Only +7 days is set to avoid long stock lock. ARUN is configured to substitute material.
    6. ARUN is ran in background and DO NOT SELECT MATERIAL 1 REQUIREMENT  becouse confirmed delyvery date is today + 30.
    7. I can not select requirements +30 days becouse of long lock period.
    How could I make  ARUN to select  requirements with +30 confirmed delivery day and meke allocation only if substitution happends.
    Sorry for long descrip
    Andrey Garshin.

    Hello Andrey,
    You would need to maintain the  window for 30 days else ARun will not select hte requirements.This is the only way.
    Check for the field SUBRU in the x_bdbs  table in the user exit before posting.If it is not empty, then it means substitution has taken place.Then in that case save the results else do not save.
    Hope this helps.
    Best Regards,
    Anitha

  • AFS ARUN goods receipt future allocation

    I'm not able to test a future allocation all the way through for our current setup.
    I allocated an order to future PO and Create an inbound delivery for PO.  At this point /afs/md04 is allocated (R) to stock type 'L'.  When I do the Goods receipt against the Inbound delivery, /afs/md04 remains the same.  I was expecting that the order would be allocated to Batch stock. 
    When I do a good receipt using MIGO against a PO, then it does work correctly - it changes the allocation from PO to batch stock.  When I do a goods receipt using MIGO against an Inbound Delivery or execute Goods receipt using VL32N, it does not - We use VL32N to Goods Receipt.
    Even after doing subsequent allocation against the order requirement using the stanard allocation, I get the message 'no open schedule lines found'.

    Hello Carol,
    might be too late, but is it possible that your stock is (was) stuck in quality inspection?
    KR,
    Peter

  • Enhancement and new features available in AFS 6.0 in reference to AFS 5.0?

    Hi Experts,
    Please can you explain what are the Enhancement and new features available in AFS 6.0 in reference to AFS 5.0

    Hi Mithun,
    Following are the details you needed.
    Enhancement and new features available in AFS 6.0 wrt AFS 5.0
    AFS Interface
    AFS GTS Master Data Integration - IS-AFS-INT-GTS (New)
    As of SAP AFS 6.0, you can integrate the SAP Global Trade Services 7.1 (SAP GTS 7.1) master data to the AFS data.
    AFS Retail Integration (Change)
    As of SAP AFS 6.0, the integration of Apparel and Footwear Solution (AFS) with Retail has been
    Enhanced by the following functions:
    u2022     One SAP Retail Logical system is mapped to multiple Customers in SAP AFS system, which ensures that each Customer can be mapped to a different purchase organization.
    u2022     You can maintain the retail merchandise category in the AFS material master for each retail logical system.
    u2022     The variant numbers created in the retail for the article (material in AFS) have the number with the category and grid combination. A new BADI method is used to allow the user to change the variant numbering as required.
    u2022     The material type of the generic article created is the same as the AFS material. A new BADI method is used to set the material type of the article as required.
    Quality Management (IS-AFS-QM)
    Enabling QM for Goods Receipt (GR) Process for AFS (New)
    As of SAP AFS 6.0, you can activate the inspection type at material level and control the inspection lot creation at stock keeping unit (SKU) level during the goods receipt process.
    Additionally, during posting of quality inspection stocks, you can directly post stock of one SKU to unrestricted stock of another SKU.
    Basic Data (IS-AFS-BD)
    Commodity Codes at the SKU Level (New)
    As of SAP AFS 6.0, you can maintain commodity codes at the SKU level in the material master. A new relevancy Global Trade Services (GTS) is allotted to the characteristics attached to the grid and categories. If this new relevancy is set then the commodity codes can be assigned at the SKU level. You can also assign commodity codes of different countries other than the country in which the plant is located.
    The AFS material master IDoc and BAPI have been enhanced to handle commodity codes at the SKU level.
    Material Master Enhancements (New)
    As of SAP AFS 6.0, the following enhancements have been made in the material master:
    u2022     You can maintain commodity codes at the stock keeping unit (SKU) level.
    u2022     You can maintain the retail data merchandise category and characteristic profile at the material master level. This is used to create article in retail.
    u2022     You can maintain quality management (QM) inspection type at SKU level.
    u2022     You can enable Seasons for inventory management (IM).
    Materials Management (IS-AFS-MM)
    Seasonality Roundoff - Inventory Management-(New)
    As of SAP AFS 6.0, season functionality is extended to Inventory Management (IM). This enables you to gain an overview of material movements during each season. You can maintain stocks for different seasons separately. To enable this functionality, you have to activate the Season Active in IM indicator for a material in the material master. This indicator can be set only for materials created in AFS 6.0. If the season is maintained for an SKU in the material master, you can obtain season information for the SKUs in batches, in material movement documents and in stock tables.
    Also, as of AFS 6.0, you cannot set the Season Fixed indicator for new materials. However, for old materials (materials created in AFS 5.0 with Season Fixed indicator) the behavior remains the same.
    Stock Selection Available in Transaction MIGO (New)
    As of SAP AFS 6.0, the goods movement transaction MIGO has been enhanced with Stock Selection for AFS materials. Goods movement here implies only goods issued/transfer postings without document reference.
    Consumption of PIRs by TPO, MTO and PTO (New)
    As of SAP AFS 6.0, the Consume PIR Customizing indicator at sales and distribution (SD) item category level enables special orders like TPO (third-party order), MTO (make-to order) and PTO (purchase-to order) to consume normal planned independent requirements (PIRs).
    IS-AFS-MM-PUR Purchasing
    Purchasing BAPIs (Change)
    The interface of the purchase order (PO) BAPIs mentioned below have been enhanced with optional parameters to handle the AFS data.
    Purchase order BAPIs
    u2022      AFSPurchaseOrder.GetDetail1 (BAPI_PO_GETDETAIL1)
    u2022     AFSPurchaseOrder.Change (BAPI_PO_CHANGE)
    u2022     AFSPurchaseOrder.CreateFromData1 (BAPI_PO_CREATE1)
    Purchase Requisition BAPIs
    u2022     PurchaseRequisition.CreateFromData (BAPI_REQUISITION_CREATE)
    u2022     PurchaseRequisition.Change (BAPI_REQUISITION_CHANGE)
    u2022     PurchaseRequisition.Delete (BAPI_REQUISITION_DELETE)
    Contract BAPIs
    u2022     PurchasingContract.Change (BAPI_CONTRACT_CHANGE)
    u2022     PurchasingContract.Create (BAPI_CONTRACT_CREATE)
    u2022     PurchasingContract.GetDetail (BAPI_CONTRACT_GETDETAIL)
    Production planning and control IS-AFS- PP
      Manufacturing (IS-AFS-PP-MAN)
    BAPI for Bill of Material (BOM) Maintenance (New)
    As of SAP AFS 6.0, you use this BAPI (AFSMaterialBOM.AFSMatBomMaintain) to maintain a material BOM. You can also use this BAPI for the following functionalities:
    u2022     Creating a standard or AFS BOM
    u2022     Changing a standard or AFS BOM
    u2022     Updating a quantity distribution profile for AFS BOM components
    u2022     Maintaining SKU deviation quantities or zero quantities (if relevant) for AFS BOM components
    u2022     Maintaining categories (if relevant) for AFS BOM components
    Transaction for Grouping PO using Combined Order Number (New)
    BAPIs for AFS Planned Orders - Create, Change and Get Details (Change)
    BAPI for Production Orders - Create, Change and Get Details (Change)
    Production Planning (IS-AFS-PP-PPL)
    Consumption of PIRs by TPO, MTO and PTO (New)
    As of SAP AFS 6.0, the Consume PIR Customizing indicator at sales and distribution (SD) item category level enables special orders like TPO (third-party order), MTO (make-to order) and PTO (purchase-to order) to consume normal planned independent requirements (PIRs).
    Sales and Distribution (IS-AFS-SD)
    BADI for Contract Selection (New)
    As of SAP AFS 6.0, you can use this BADI to filter contracts for display when a sales order is created without giving reference to the contract, and when there are open contracts for the material. This functionality is also available for the sales order created by IDocs.
    BAPI for AFS Material Availability (New)
    you can use this BAPI method MaterialAFS.AFSAvailabilityCheck (/AFS/BAPI_MAT_AVAILABILITY) to determine the available quantity for an AFS material in a certain plant according to ATP (available-to-promise) logic.
    Consumption of PIRs by TPO, MTO and PTO (New)
    As of SAP AFS 6.0, the Consume PIR Customizing indicator at sales and distribution (SD) item category level enables special orders like TPO (third-party order), MTO (make-to order) and PTO(purchase-to order) to consume normal planned independent requirements (PIRs).
    Display of Allocated Quantities (New)
    As of SAP AFS 6.0, you can find the allocated quantity information of the contract in the Contract Reference Overview screen.
    BAdIs in Mass Document Change MDC (New)
    The following NEW Business Add-Ins (BAdIs) are provided:
    u2022     BAdI for adding custom selection fields in MDC (/AFS/MDC_SELECT_CUSTOM_FIELDS) -You use this BAdI to implement your business process-specific logic in selecting data in mass Document Change transaction (/AFS/MDC).
    u2022     BAdI for adding custom change fields in MDC (/AFS/MDC_CHANGE_CUSTOM_FIELDS) -You use this BAdI for implementing your business process-specific logic in changing custom fields data in transaction /AFS/MDC.
    u2022     BAdI for adding custom fields to the Adjust Update tab in MDC (/AFS/MDC_ADJ_UPD_CUSTOM_FIELDS) you use this BAdI to implement custom processes that are specific to your business scenario.
    Condition Table Display (Change)
    As of SAP AFS 6.0, in transaction J3A9 it is possible to display condition tables for value-added service(VAS) and multi-store order (MSO) condition types beyond the existing limit of 19 condition tables. The Conditions Info display in transactions J3A4 and J3AN can be viewed in an ALV list.
    AFS Sales and Distribution (SD) IDOCS
    As of SAP AFS 6.0, the function modules J_4A_IDOC_INPUT_ORDERS and J_4A_IDOC_INPUT_ORDCHG are not supported. The standard function module IDOC_INPUT_ORDERS are used instead J_4A_IDOC_INPUT_ORDERS and standard function module IDOC_INPUT_ORDCHG are used instead of J_4A_IDOC_INPUT_ORDCHG. There is no change in the IDOC type /AFS/ORDERS05 which is presently used to create/change sales orders. Accordingly, you must use inbound process code ORDE for message type ORDERS and inbound process code ORDC for message type ORDCHG.
    Supporting the Change of Single Characteristic (New)
    As of SAP AFS 6.0, you can use transaction /AFS/MDC, to select sales documents by specifying a single characteristic name and value range in the same ways as you select sales documents by specifying grid value.
    Partial Quantity Reductions in Sales Order (New)
    As of SAP AFS 6.0, you can find the quantity changes done for a schedule line from the sales order screen itself without navigating to the change logs. This is possible only when you reduce the quantity of a schedule line.
    Allocation Run (IS-AFS-ARUN)
    Seasonality Roundoff - Allocation Run (New)
    As of SAP AFS 6.0, season functionality is available in the allocation run (ARun) to ensure the season information is considered while creating assignments, and to cause deallocation as per the settings in the deallocation rule on change in season information in the future receipts, sales order or while performing goods receipt (GR). This functionality is available only with online ARun.
    BAPI for Individual Allocation and/or Deallocation
    As of SAP AFS 6.0, you can use the BAPI /AFS/BAPI_INDIVIDUAL_ARUN to handle allocation/deallocation of specified sales order quantities for single or multiple orders. This enables you to make:
    u2022     New allocations
    u2022     Allocations from a particular storage location/batch number
    u2022     Allocations for a quantity less than equal to the requirement quantity
    u2022     Deallocations for a quantity less than equal to the requirement quantity
    u2022     A total deallocation
    Hope it helps.
    Regards,
    Anirban Roy

  • AFS sale order - arun report

    Hi!
    I need report similar to /AFS/MD04  AFS stock req list but for  all material of one sale order on onew screen.
    User want to see statuses for allpositions of  order at one time  to make decision about delivery.
    any standart report?
    Andrey Garshin.

    Hi Andrey,
    I don't see a benefit from seeing statuses in a sales order.
    /AFS/MD04 is a stock/requirements list for the MRP conroller.
    It does a complete different calculation than ARUN or ATP.
    It will not help you to determine what can delivered.
    You can have orders in B status and still be able to allocate and deliver it.
    So explain your business requirements. What do you want to see?
    Best Regards,
    Markus
    Edited by: Markus Doerr on Jun 8, 2010 10:16 AM

  • ARUN In SAP AFS

    Hi All,
                 What is Alocation run SAP AFS .. how to configure the ARUN .. Is it mandatory in MTO Scenario
    Regards/smith

    Hello,
    For MTO scenario, it is ARun is not needed. Only in case of Make to Stock scenario, we would require ARUN to allocate available stocks to the requirements in an optimum manner.. Please search in this forum about ARUN and how to configure the same. Please go thru help.sap.com which has detail explanation for ARUN.
    thanks
    Venkatesh

  • AFS - SD allocation/re-allocation run

    Hi,
    I need help with this specific scenario.We have the AFS solution in our system.
    The scenario goes something like this:
    Sales Order is created. The allocation run is run, stock is allocated for the requirement. The outbound delivery is created and the TO is created automatically and picked and confirmed automatically.
    In case of short pick, the items are returned to bin and the delivery quantity is reduced. As far as i understand, after the delivery quantity is reduced in the delivery, we can no longer increase it as I get the message " Delivery qty > allocated stock qty / qty will be reduced"
    In some cases, the user would like to increase the quantity in the delivery, after the delivery qty was deleted by mistake. (for example reduced the quantity of a wrong schedule line)
    So I am looking for a solution, how to allocate stock back to the order/specific line item after the delivery has been created. Unless I allocate stock, I am not able to increase the delivery quantity. (Note: I seen this problem occur only in AFS, where once allocation is gone, delivery quantity cannot be increased.)
    I have tried experimenting with the Arun Optimizer with no success.
    Any solution to this problem ? Can anyone please guide me on this ?

    Hi,
    Sorry about the late reply.
    My email id is :
    [email protected]
    Thanks a lot in advance,
    Rajeevan

  • AFS User Exit for Allocation Run Sorting

    Hi Gurus,
    can you please help us in order to identify which BAPI or User Exit needs to be used to perform a custom sorting on AFS Allocation Run?
    My aim is to perform a specific calculation on a single field of the requirement sorting table (/AFS/SOFN_V-SOFNA) during ARun processing..
    Given a specific value of this field (that will be EDATU - confirmed delivery date) I want to assign a dynamic value based on a comparison with an external table, in order to determine whether EDATU belongs to range A, B or C
    Any idea?
    Thanks in advance for your help
    Regards, Alessio

    solved with the help of SAP note.

  • SAP AFS Complete Cycle

    *will anyone provide SAP Std Business scenarios for SAP AFS Module with T-Codes and complete cycle of Sales process in AFS (Order to Cash).

    Hi,
    Please refer to the link:
    http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm
    It will help you to learn more about SAP.
    AFS Process will be as follows:
    1. Sale Order Creation : TCode :VA01
        At the time of sale order creation - ATP will allocate the stock to the sale order temporarily.
        (In the transaction - /AFS/MD04 - after sale order creation - the stock will be temporarily assigned)
    2. ARun : TCode : J3AT
        Actual assignment of Stocks to the requirement takes place by using ARun.
        (After ARun - in the sale order - Allocation Status will be changed to Fully allocated)
        (In /AFS/MD04 - the status will be changed to F - Fixed assignment)
    3. Delivery Creation: VL01N and do PGI. - Create delivery.
    4. Billing - VF01.
    Thanks,
    Venkatesh.S.P

  • SAP AFS - VL10B delivery from specified storage location

    Dear all,
    I have created STO for an AFS material.
    As this material is available in various storage locations of the supplying plant.
    Now I am trying to create delivery through VL10B, entered the Purchase Order, Plant and specific location in the material tab, but system is not generating any outbound delivery in the background.
    again, in VL10B, if I have not specified any storage location in the material tab, system is generating the Outbound delivery for multiple storage locations with reference to batch split.
    How come system is not picking the specified storage location in VL10B transaction.
    Can I specify the issuing storage location while creating the STO, so that during VL10B, automatically the system will pickup the same storage location.
    thanks in advance,
    urendra

    Dear Urendra,
    If you creating a delivery for an AFS material, system picks the stocks based on the allocation rule defined in the system. Hence first efine the allocation rule in the system.
    To achieve the functionality of issuing stock in case of a STO from a
    particular storage location kindly maintain the below customizing.
    1) Go to transaction J3AS -> arun detail -> define allocation logic ->
    stock sorting
    3) Here maintain a stock sort rule .
    5) To this sort rule you can assign fields in this case it would be
    LGONR with field values EW and QA
    6)Once that is done, give the priority to the storage location in
    accordance to your requirement.
    7) Assign this sort rule to the main Arun type following the
    path J3AS-> ARun type-> here select Arun type and then under allocation tab
    go to the allocation rule maintained , out here there is the option
    stock sorting.
    Once this is done the storage location picked would be in the order
    of the above mentioned priority.
    Only if there is no stock in storage location of higher priority
    will the stock be then picked from storage location of lower priority.
    I hope this helps.
    Regards,
    Rakesh

  • SAP-IS-AFS study material needed urgently

    Hi
    I am basically a SAP-MM consultant working on R/3.
    I am in need of SAP-IS-AFS training / self study material with excercises just like SCM600, very urgently !!
    Can anyone help me out, where i can download or where i can get.
    Thanks
    Maruthi Ram

    Dear Ram,
    Please refer the link to get details on AFS - SD, MM ,etc:
    http://help.sap.com/saphelp_afs50/helpdata/en/b2/53ae56cda511d2aca20000e829fbfe/frameset.htm
    Please refer the link ..
    Re: Reg : ARun type
    Re: Allocation run in AFS
    That will solve the query on Allocation Run.
    Please search in this forum with search text: AFS or ARUN Type..
    Thanks,
    Venkatesh.S.P

  • AFS SD creat DN for no stock

    Hi friends.
    AFS MTO business,so I config do not use ARun.
    I want to creat DN for no stock.And I close ATP check.
    But I can not create DN for no stock.
    So I want to know AFS can create DN for no stock.
    Error text:
    Order cannot be delivered (see long text)
    Message no. VL461
    Diagnosis
    Possible reasons include:
    The copy conditions specified in Specify copy control for deliveries do not allow the order to be delivered.
    The order is blocked for delivery.
    The order document is incomplete.
    Procedure
    Pay attention to any notes that may be recorded in the log.
    You can display the copying requirements defined for this transaction in Customizing.

    Up

  • Sap afs sd

    Scenario is as below:
    Our client is in apparels and footwears and have there overseas operation also:
    I am doing configuration with  the logic that as follows:
    Client is doing exports as according to the requirements from the
    overseas customers and also there are domestic customers.
    Now I am utilising the functionalities like season, material grids and
    category structure as below.
    SEASON: OFF SEASON,ON SEASON
    MATERIAL GRID: NL,XL,XXL  (NL NORMAL,,XL EXTRA LARGE,XXL : DOUBLE EXTRA LG)
    CATEGORY STRUCTURE : REQUIREMENT CATEGORIES,STOCK CATEGORIES
    Product A  off season (export-sale)  material grids whichever is
    applicable or demanded by client customers. As product is, off season
    I am using requirement categories and for allocation run i am using
    coverage stategy with characteristics as QUALITY,SEASON AND PRODUCT.
    I am using Make to order strategy for off season material which would
    be export sales ,and make to stock strategy for on season materials
    which would be domestic sales.
    (path:img-logistic general-afs categories-define coverage strategy)
    Now the problems I am facing is system is giving me message "invalid
    input" after  maintaining coverage strategy parameters ie: such like
    category value,allocation run requirements etc.
    Now if the above scenario perhaps clear to you,Could you please let me
    know where i am going against system(sap afs sd).
    Also if possible let me know certain config documents pertaining to
    order scheduling,allocation run,delivery and billing
    Thanks And Regards
    KAPIL MORE

    Kapil,
    goto define coverage stratergy ->Select your stratergy ->double click on coverage stratergy on left side it will display category structure ->again select the same and double click on Arun/MRP/... option on left side there you should mention Stock category and MRP-Mod tab.
    "The MRP module controls the assignment of the requirement categories to the stock categories. Module M1 uses a strategy where all batches of stock, purchase requisitions and purchase orders which are available on the requested delivery date (sales order) and assigned to the stock category, will be used to satisfy the requirement"
    and i would suggest you to check each and every tab in structure and stratergy both you might have missed something.
    try and revert.
    hope its helpful to you.
    Regards
    Ashwini

Maybe you are looking for

  • Write errors when using non-administrator shared accounts

    Dear all, we're experiencing an apparently weird issue with our Xserve machines. The entire setup comprises of 4 Xserve, all of them running Lion Server, connected together and to the network of our institution through an Ethernet switch. I've set up

  • How to add sum in dynamic alv ?

    hello , i create dynamic alv , by using FIELD-SYMBOLS , but my columns are char type , and the SUM an SUBTOTAL not work . how i can tern the internal table that build with char columns to be numeric (like BSIK-WRBTR)?

  • Can't get my Premiere Elements 11 to reinstall

    I am told that you are only allowed a finite number of times that you can reinstall Premiere Elements 11 and I seem to have reached it. What do I do now ?

  • Return focus from html panel?

    Hey everyone, can you please tell me if there's a way to return focus from the html panel back to Photoshop? I've tried app.activate() but no luck Many thanks!

  • Transfer old PS Elements (version 4) to another computer

    I am trying to transfer an old version (V4) of PS Elements from one computer to another. Tells me serial no. is invalid even though I've triple checked it. Help please. I do not want to upgrade. This version works fine for me.