After changing the start and end of a song i iTunes, the change does no longer appear on my iPod, instead I get the whole song

I use Ipod nano bought last year.
I use iMac with OS X Yosemite.
The problem appeared about 1-2 months ago
Have reset the Ipod to no avail.
If I have a song, say 8 minutes long, and want to start 1:00 and finish 4:00. That works alright with iTunes on my iMac. But when I sync the song to my iPod nano, then the song starts at 0:00 and ends at 8:00.

- First try a rset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try restoring from backup

Similar Messages

Error 13641 - The Subnet prefix must be between the starting and ending values

Hi All,
I can honestly say hand on heart that this is the first time I have ever asked for help in a forum in over 15 years but this is doing my head in..
I have a Sys Center 2012 R2 deployment.. VMM R2 up to RU3, Edge Cluster (2 hosts), Management Cluster (2 hosts), 2 x Production Compute Clusters (total of 20 hosts). I have a HA Network Virt Gateway deployed on the edge cluster.
All Hosts have the new DHCP install done and the RU3 SQL patch is completed as outlined in deployment manual.
Everything had been running fine for some time after RU3 update... I am experiencing an issue whereby I get the following error anytime I try and attach a NVGRE VM network to a VM, or when I try and migrate a VM with a NVGRE network attached to another
host.
Error (13641)
The specified subnet prefix must be between the starting and ending values for the range.
Starting value: 4
Ending value: 30
Recommended Action
Specify a suitable subnet prefix.
All subnets in the entire network are /24's so prefix isn't an issue.
I can successfully attach a standard vm network but get the above error when working with NVRGE networks..
Further to this, if I restart VMM the DHCP function to VM's with NVGRE networks doesn't get picked up until I trigger a change in config on the VM, then it will get IP and function as expected.
I have checked all logs, there aren't any errors that I can see.
get-netvirtualizationlookuprecord throws out VM's and PA's as expected, but again not until I manually interfere with the VM in question.
Have any of you come across this before?? I want to check before I go rebuilding the PA network entirely and having to cleanup all existing VM networks to do it..
Any help or guidance would be appreciated..
Cheers
Nathan

I have seen this message before, "specify a suitable subnet prefix".
In my case, the NVGRE policies were out of sync due to HW issues on several hosts.
Here's some steps in order to troubleshoot/fix:
run the following cmdlet: Get-SCVMHost | Read-SCVMhost -RunAsynchronously
Check for any errors in the job log that refers to "Network Virtualization".
If this doesn't help, a recycle of the VMM Management server should do a "hard refresh" of the NVGRE policies, and it might include a reboot of the nvgre hosts too.
This solved the case in my situation.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How to change Validity Start and end dates on a lane ?

Hi,
I am trying to change Validity start and end dates on a lane for a product specific assignment.
What I see is as follows
1) Lane created by system /others I can delete and give the required start /end date ?
I want to know if I can change the end date without deleting the lane as its tough to delete a lane in production.
Thanks
-Venky.

Hi,
we can change the start period and end period in the Transportation lane using the table /SAPAPO/TRPROD.
And then using the update command you can change the start time and end time of the product.
Regards,
Hyma.

Calculate the working days having the start and end dates only

Hi,
Can BIP be able to calculate the working days having the start and end dates only? It is like the NETWORKDAYS function in Excel. (i.e. excluding weekends and holidays).
Thanks.

Not out of the box.
But You could extend your BIP functions
Look at here:
http://blogs.oracle.com/xmlpublisher/2009/05/bip_by_extension.html
Based on that what you need is similar to the following Java code:
http://objectlabkit.sourceforge.net/
regards
Jorge A.

Getting the start and end dates of the week

Hi,
I was stuck with a problem in getting the start date and end date of the week,i know the month ,week and year also,with these three values how can i get the start and end dates of a week.please help me
Thanks

There is no simple way. It has to be a math calculation.
There are several ways you can get the dates. First you have to know what day is January 1st and what day is december 31st for a particular year. Second you have to check whether the given year is a leap year or not. Based on the abvove information you should be able to find out what day is a particular date.
Hope this helps to get you started.
- Venkat Dhurjati.

Define the start and end dates of an assigned academic period in fee calc.

Define the start and end dates of an assigned academic period
Message no. HRPIQ00ACCOUNTING132
Diagnosis
The academic calendar assigned to the top organizational unit does not contain a start or end date for the academic period (academic year and session) assigned to fee calculation period Z000.
System Response
The system will skip fee calculation period Z000 and continue processing with the next fee calculation period.
Procedure
1. Check which academic calendar is assigned to the top organizational unit.
2. Check which academic period is assigned to fee calculation period Z000. You check this setting in Customizing for Campus Management in the IMG activity Assign Academic Years and Sessions to Fee Calculation Periods.
3. In this academic calendar, create the start and end dates of the relevant academic period using standard time limit 0100 (standard duration of academic period) or a corresponding user-defined time limit.
For more information, see
Define Top Organizational Unit
Define Mandatory Time Limits for Academic Calendar
please give me the needful information to solve this problem.
Regards
Arun Rai

Arun,
Have you looked in the Student Accounting Cookbook
http://www.sdn.sap.com/irj/scn/advancedsearch?query=studentaccountingcookbook on page 13?
Page 1-18 will help you setup the Oranizational unit, the academic calendar and the modules.
Bev beck

Adding a summary column in a table which contains the start and end dates in the week

Hi,
I've got a DIMENSION DATE table and want to add in another column which shows the start and end date of the week.
See below, the new column is WEEKOFYEARTEXT.
Does anybody know how i may generate this column using SQL and using the existing columns?
Umar Javed

See: http://www.sqlusa.com/bestpractices/datetimeconversion/
DECLARE @Year INT = '2015';
WITH cteDays AS (SELECT DayOfYear=Dateadd(dd, number,
CONVERT(DATE, CONVERT(char(4),@Year)+'0101'))
FROM master.dbo.spt_values WHERE type='P'),
CTE AS (SELECT DayOfYear, WeekOfYear=DATEPART(week,DayOfYear)
FROM cteDays WHERE YEAR(DayOfYear)= @YEAR)
SELECT WeekOfYear, StartOfWeek=MIN(DayOfYear), EndOfWeek=MAX(DayOfYear)
FROM CTE GROUP BY WeekOfYear ORDER BY WeekOfYear;
WeekOfYear StartOfWeek EndOfWeek
1 2015-01-01 2015-01-03
2 2015-01-04 2015-01-10
3 2015-01-11 2015-01-17
4 2015-01-18 2015-01-24
5 2015-01-25 2015-01-31
6 2015-02-01 2015-02-07
7 2015-02-08 2015-02-14
8 2015-02-15 2015-02-21
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

HT1420 I just bought my cousin's ipod, and I want to update it on my computer. However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers. How can I update this ipod without losing all the apps?

I just bought my cousin's ipod, and I want to update it on my computer. However, it needs authorization from his account to keep all the apps, and he's already authorized it on 5 computers. How can I update this ipod without losing all the apps?

You cannot use someone else's apps without violating the license agreement. The apps are tied to the owner (via Apple ID). The right thing to do would be to update and start fresh.

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

Converting to ProRes changes Media Start and End

I have a series of clips that were incorrectly all captured Uncompressed.
Primarily to save on space, I need to convert them to ProRes.
Using Compressor, I drop the clips in and use one of the preset settings for High Quality Progressive ProRes and convert. The conversion works great.
However, after I replace the clips with the new slimmer versions, when I start FCP up and reconnect them, it tells me that the Media Start and End changed. Indeed, when I look at the Uncompressed and ProRes version in FCP, they do not have the same Media Start and End values.
Can anyone help me understand what is going on here? How is the conversion changing these values?
Or better yet, provide me with a better workflow for converting all these clips to ProRes so FCP does not have a fit?
Thanks,
Dean

To keep the same timecode, you have to use the Media Manager and RECOMPRESS.
Shane

Calculate Start and End date in Connect By -- When Hirerchy Changes

/* Formatted on 5/20/2013 9:53:00 AM (QP5 v5.115.810.9015) */
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Hello , Can some one Please help me or Guide me in calculating Start and End dates for the below logic
I want to calculate the Manager Hirerchy for the given Agent.
Then Below Query is working fine and its giving me the desired results
But when there is a change in the Manager Hirerchy or Manager gets Promoted
Then i need to calculate the start date and end date.
CREATE TABLE PERSON_DTL
SID                 VARCHAR2(10 BYTE),
EMP_MGRS_ID         VARCHAR2(10 BYTE),
START_EFFECTIVE_DT DATE,
END_EFFECTIVE_DT    DATE
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M107', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M101', 'M102', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A100', 'M100', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M100', 'M101', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('05/18/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M107', 'M102', TO_DATE('05/20/2013 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M102', 'M103', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M103', 'M104', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('A101', 'M105', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
Insert into PERSON_DTL
   (SID, EMP_MGRS_ID, START_EFFECTIVE_DT, END_EFFECTIVE_DT)
Values
   ('M105', 'M106', TO_DATE('01/01/2010 00:00:00', 'MM/DD/YYYY HH24:MI:SS'), TO_DATE('12/31/9999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
             TRIM (
                LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
                                 || ','
                                 || b.emp_mgrs_id
                PATH,
             START_EFFECTIVE_DT Start_dt,
             END_EFFECTIVE_DT End_dt
      FROM   PERSON_DTL b
     WHERE   CONNECT_BY_ISLEAF = 1
START WITH   sid IN ('A101', 'A100')
CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
This is the results that i am getting now.
AGENT_SID    PATH                       START_DT    END_DT
A100    A100,M100,M101,M102,M103,M104    1/1/2010    12/31/9999
A100    A100,M100,M107,M102,M103,M104    1/1/2010    12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999
Results Required
A100    A100,M100,M101,M102,M103,M104    1/1/2010    5/18/2013
A100    A100,M100,M107,M102,M103,M104    5/20/2013   12/31/9999
A101    A101,M105,M106                   1/1/2010    12/31/9999

May be this..
SQL> select agent_sid,max(path) path,max(start_dt) start_dt,
2         min(end_dt) end_dt
3 from
4 (
5    select agent_sid,path,start_dt,end_dt,
6           sum(flg) over(order by rn) sm
7    from
8    (
9      select agent_sid,
10             path,
11             start_dt,
12             end_dt,rn,
13             case when path like lag(path) over(order by rn)||'%' then 0 else 1 end flg
14      from
15      (
16        SELECT   CONNECT_BY_ROOT (b.sid) agent_sid,
17                 TRIM (
18                    LEADING ',' FROM    SYS_CONNECT_BY_PATH (b.sid, ',')
19                                     || ','
20                                     || b.emp_mgrs_id
21                 )
22                  PATH,
23                 START_EFFECTIVE_DT Start_dt,
24                 END_EFFECTIVE_DT End_dt,rownum rn
25        FROM   PERSON_DTL b
26        START WITH   sid IN ('A101', 'A100')
27        CONNECT BY   PRIOR b.emp_mgrs_id = b.sid
28      )
29    )
30 )
31 group by agent_sid,sm
32 order by agent_sid;
AGENT_SID PATH                                     START_DT END_DT
A100       A100,M100,M101,M102,M103,M104            01-JAN-10 18-MAY-13
A100       A100,M100,M107,M102,M103,M104            20-MAY-13 31-DEC-99
A101       A101,M105,M106                           01-JAN-10 31-DEC-99Edited by: jeneesh on May 20, 2013 7:54 PM
Not thoroughly tested.And not sure whether an easy way exists..

Changing Media Start and End of Logged Clips

This should be really simple, and I'm sure I'm just overlooking something. I am trying to recapture some clips in Final Cut Pro and it was fine until I came to a clip that gave me the "timecode error - pre roll, post roll, etc" message. The Media Start on the problematic clip is at 00:00:01:04 - I want to manually change this time to allow pre-roll. The timecode in the "In" and "Out" sections isn't making a difference and seems unrelated - no matter what I put it to.
So I just want to edit the Media Start time as I'm sure this would remedy my timecode error when trying to capture... but I can't edit that field. What am I doing wrong? How do I change the Media Start time?
I could recapture the whole tape independently but I already have sequences edited based on my previously logged clip. Any help would be greatly appreciated. Thanks!

If you are re-capturing then you must have used Capture Now to get the clip first time round or you would have run into the same trouble with pre-roll. You'll have to capture the clip again using the same method. Of course, the chances of getting the same start and end code using Capture Now are slim, but if you can get in earlier and out later then you should be able to manually re-connect the clip.
rh

How to change both start and end dates for an business event (or any object

Hi all.
We are in the case to change the validity dates for several business events in training management.
The special point is that both, start and end date, have to be changed.
In example, business event 00000001 is valid from 2010.01.01 to 2010.01.31 and shoud be "moved" from 2010.05.01 to 2010.05.31.
So if i run RHBEGDA0 report to change start date first, it doesn't work propperly because new start date is bigger than old enddate.
Next thing we thought is to change end date first, using RHGRENZ1, and then change the start date, with the report RHBEGDA0. Problem with this solution is that a business event duration shoud be calculated taking care of free days (weekends and day ofs).
Is there any better solution for this?
Thanks in advance for your help.
Best regards.

Hi,
I gueass the best solution is to use PV1A t-code.
You can write an LSMW for this t-code if the number of business events to be maintained is huge.
Regards,
Dilek

How to find the start and ending dates of a quarter of a particular fiscal

Hi Experts,
I need a function mudule which returns starting and ending date s of a particular quarter of a particular fiscal year .
For Example: if pass 1 quarter and 2002 or 2 quarter 2002 it has to give me the star and end dates of that particular quarter na d fiscal year.
Please help me which is urgent for me.

Hi Kishan thanks for reply.
But given function module the 2nd one is full but it is giving me the calender year dates but i need fiscal yea dates.
fro example: if i pass 1 st quarte and 2006 it is to give me the 1st-april to 30-jun2006.
And need this quater starting date and ending date for as per USA fiscal year calender.
If u get any idea plz let me know.
thanks.
Dashmantha.

How can I make the start and end of a move smooth?

In Premiere Elements 11 I often have zooms or pans which I want to begin gradually, then speed up slightly and then slow down as each one ends. I've tried every comination and permutation of temporal and spatial interpolation, and I still can't seem to get it quite right. Often I wind up with the image doing a graceful arc (no doubt the result of a bezier interpolation) rather than just moving in a straight line. Is there just a simple solution? I just can't stand having a move start and stop with jerky linear motion.
Thanks in advance.

Mark West
To supplement prior information
If you want to change what the clip rubberband represents, you can click on the tiny triangle next to the Timeline's clip's title.
Please refer to blog post on Video and Audio Track Content Rubberband
http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html
In the case of a video clip, the default for its rubberband is Opacity. But that can be changed to Motion. As I wrote in the blog post
The Motion Property options are Position, Scale, Constrain Proportions, Rotation, Anchor Point, or Anti-Flicker filter. The Opacity choice is just Opacity.
Keyframing of these properties are reflected as white dots on the clip's rubberband and can be adjusted at that level.
If you do not see the white dots keyframes in the clip's rubberband, then right click the file, select "Show Clip Keyframes", follow to Motion and Opacity, pick one, and follow to find your property named, and select it.
At the rubberband level, right clicking a keyframe (white dot) there, offers opportunities for Linear, Bezier, Auto Bezier, Continous Bezier, Hold, Ease In, Ease Out, and Delete. If you select Bezier, do you see the keyframe handles?
I have not done this, but you might want to see how much of the following you can get done in Premiere Elements using the Final Cut description of "Smoothing Keyframes with Bezier Hangles".
https://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=67%26section= 2%26tasks=true
ATR

After changing the start and end of a song i iTunes, the change does no longer appear on my iPod, instead I get the whole song

Similar Messages

Maybe you are looking for