Alarm or notice when a Document is created

I need to create an alarm ,message or notice when a document is created. Especially when a Good Receipt PO is created, I need an alarm or message to a specific user in SBO. Any help?

Hi Hector
I realise id that means
SELECT Top 1 T0.DocNum, T0.CardCode, T0.CardName FROM OPDN T0 INNER JOIN OHEM T1 ON T0.OwnerCode = T1.empID WHERE T0.DocStatus ='o' and T1.empiD ='1' ORDER BY T0.DocNum Desc
OHEM .empid is stored in Human resources modules >> considering the empID 1 is owner of the purchase order.
By the way
What do you mean by sole document ? Can you explain what exactly(field)
you want to see in the alert ?
Actually with the yellow arrow you can see the detail of the report by drill down
Thank you
Bishal
Edited by: BIshal Adhikari on Dec 17, 2008 5:27 PM
Edited by: BIshal Adhikari on Dec 17, 2008 5:36 PM

Similar Messages

Send Mail alert to customer when billing document is created

Hi experts,
My requirement is to send email alert to customers when billing document is saved.( in transaction VF01 ).
I don't want to send any pdf format. I just want to intimate customer that the invoice is created.
Searched forum and tried all possible ways. Please send the steps to configure the same.
Request your valuable suggestions in this regard ASAP.
Thanks in Advance.
Regards,
Farha.

Hi,
It is also similar to sending the PDF document through email.
But in your case, it becomes easy. The program should take only the invoice number and send the invoice number through email to the desired email address.
You have to configure the output type as normal as any other email output type.
The logic has to be defined in the program.
So there is no difference at the functional consultant level, the technical consultant should accordingly write the code to just send the invoice number.

Create workflow to email all users added to a sharepoint list when a document is created / modified

Hello,
I need to have a list, lets call it List A, that is used as a collection of users which will recieve an email when a document that is added or modified in a different library, Library A. Essentially I want the workflow to parse all of the users added
to List A and email them upon the modification or addition of a document to Library A.
I know how to setup the email but i dont know how to parse the list and create a dataset of all the users so i can set that in the To field of the email.
thank you,
Marc

Hi Marc,
As I understand, you have a list to store user accounts, and you would like to send email to the user accounts in this list via a workflow associated with another library.
In my test, I didn't get all values of person or group value of all items in a list which is used to store user accounts.
I'd recommend you use a SharePoint group to replace the function of the list which store user accounts. Then in the workflow, you could send email to this group and the message will be sent to indivisual members of this group.
Please refer to the screenshot below to add SharePoint group to email To box:
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Photoshop CS4 "quit unexpectedly" when opening documents or creating new ones

I recently upgraded my computer to an iMac and reinstalled Adobe CS4. All programs have worked perfectly for months, but now Photoshop will not open. Everytime, whether opening an existing document or creating a new one, it give me the message "Photoshop quit unexpectedly."
I removed ALL 3rd Party Plug-ins (only had a couple) and reinstalled Photoshop - three times... still no luck. I cannot open the program at all.
Adobe Tech Support will no longer support CS4...
HELP! SOMEBODY...

Then, your preferences were not created, maybe.
Can you try using the CS Cleaner tool to clean all traces of Adobe CS4 and install CS4 afresh? - http://www.adobe.com/support/contact/cscleanertool.html
This is different from just doing a re-install. Try it out.
Also, in the error you're getting, is there an error code or a description? IF so, can you post that here?

How can you find out when a document was created or modified

I am trying to ascertain the date a document was created and then subsequently modified in Pages 09. Can anyone offer any suggestions please?

You can get the creation date & the last modified date in Finder using Get Info or selecting the file in column view or list view.

How can i find out when a document was created?

I have a Pages document that I created a week or so ago, but I need the exact day. I've modified the document since then. Any help would be be appreciated

YAY! I'm so glad you found it! And I learned something new tonight as well I'm pretty sure the Mac I used back in the day was one of those 512K memory boys..... As you undoubtedly saw, I use a PC for work exclusively, but I soooooo prefer my Mac.
I pretty much use only Word and Excel rather than Pages and Numbers on my Mac, becuase that is what I use all day on my PC. I do like Pages for doing more creative stuff though.
Late? This is early for me (as my fellow Community Members will attest to). Although I'm going to logoff soon, I am often doing this at 1 or 2 in the morning....kind of scary, isn't it?
Thanks for posting back and sorry about the misinformation earlier. Thanks to Carolyn for pointing us in the right direction!
Cheers,
GB

Your current color settings discard CMYK profiles in linked content but profiles were set to be honoured when this document was created

Hi,
So this dialog has been bugging me for years! Yes, YEARS! Could never get rid of it. Tried deleting Ai Color prefs file etc etc nothing. It pops up even when there's no linked content on ALL .ai files regardless.
I always have "Convert to working space" for both RGB and CMYK on and unchecked missing profiles/mismatch when opening.
Would love if someone could shed some light as I have an unusual amount of files to go through this week and it's pretty annoying to have to hit enter overtime I open a file.
Thanks!

That means that the Illustrator document has an embedded profile.
If you want to get rid of the message, go to your Color Settings > Color Management Policies > CMYK and change that to: Preserve Embedded Profiles.

How do I send multiple attachments in word format when the document is created in pages

How do I send multiple attachments in word format on one em. The documents are in pages/numbers and if I use 'share' they each go into a separate e mail

Your welcome.
New problem. Just purchased Docs Go Pro for iPad word processor and there are buttons missing. Then when I go back to the App Store I clicked on app support and up comes server/webpage gone (basically). I Binged and there is not a direct site for support. How or who can be a help?

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

Smartform output to be sent as pdf when billing document is saved(VF01)

Hello all,
I`m facing a problem in transaction VF01.The requirement is,when user will save the newly created billing document in VF01 transaction ,the corresponding smartform (attached to respective output type ) should be converted and sent as pdf to ship-to party e-mail address.
I`ve done the coding so that smartform is converted and sent through transaction VF02/VF03.
But I`m facing problem in understanding how the program is automatically triggered when billing document is created.In VF02/VF03 it can be understood that on "Issue output To" and selecting respective output type,driver program is triggered and processing starts for mentioned routine in NACE.
waiting for your valuable inputs...

I hope process will go like this...
1) when you use VF01 / VF02 & save, automatically RSNAST00 standard program will be triggered.
2) This program will fetch the driver program & form from NACE transaction & it will execute the driver program.

Copy values when new action is created

Hi,
In ERP with SAPgui there was nice feature : when one document was created with reference most data were copied (and in customizing it was possible to set what exactly should be copied).
In CRM Webclient UI I have following problem:
1. If I check in WebClient customer contact and I go to assignment block "Planned Activities" and click on NEW button
2 I create a new appointment.
3. Some data (like Contact) are filled but some are missing (like Account for which Contact was created).
I would like to have "Account" information automatically taken from Contact (if contact has reference to account).
I don't think its something to be customized (SPRO), but rather to be developed for UI component.
When I searched for a solution I found this topic:
[Data transfer from one component to another component|Data transfer from one component to another component]
Could anybody confirm the correct approach to have some values populated when something is created with reference (like described in this example).
thank you for any suggestions
regards
Rafal

Hello Rafal,
First of all you should know that to determine the "ATTENDEES", the system runs through the following steps:
1) Read all partners of the business transaction.
2) Keep those BP with a partner function assigned to partner function category 0005, 0007, 0008, 0010 or 0032. You can see it in method ATTENDEES of class CL_CRM_PARTNER_RUN_BTIL.
3) Also you should know that assignment of partner function to partner function category is done in the following IMG:
SPRO >> CRM >> Basic functions >> Partner processing >> Define partner function.
Now according to me, you certainly have a problem with your partner determination procedure: there must be a partner function (linked to one of the category mentioned above) for which you forgot to set a value in "maximum number of occurrences".
Moreover, I think there is a limitation in CRM versions below 7.0: meaning no popup window is displayed to ask the user to choose which partner they want to select in case more than the max number value are found. For example: imagine you set the maximum number of allowed contact person in one document to 5, but 10 are found, the system will automatically select the first 5th for you...
Hope that clarifies the situation a little bit.
Kind regards,
Nicolas Busson.

Pages crashes when opening any document on iPad 3 Latest version. I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create anew document or open a document it just cr

Pages crashes when opening any document on iPad 3 Latest version. I tried everything I could find on the net and finally deleted Pages from my device and reinstalled it. Still when I try to create a new document or open a document it just crashes out.

Try this:
Make sure IOS is updated to latest version
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings

Delete SC line item when a follow-on document is created

Hi
We are working in a classic scenario.
When a shopping cart is created from a catalog, it automatically creates a Purchase order in ECC.
However, users are able to delete the line items of the cart when a follow-on document is created and vendor is ready to supply the material.
How to restrict the users deleting the SC line items?
PV.

Hi Azad,
Thanks for your quick reply.
We are on to SRM5.0 (SRMSERVER 550 SP11).
Even though it is standard functionality, still it is behaving the way explained.
Tried to look for OSS notes and could not find one for my version. We may take up with SAP.
Meanwhile, as this is causing lot of problem to business, I may have to achieve this by any means.
Please throw your tips.
pv

I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my documen

I've created a fillable PDF document in XI Pro. I need to change the body of the document and create a new fillable PDF document. When I do that it won't let me create a new PDF. It keeps saying "no new fields recognized. What can I do to redo my document with the changes in the text, but no changes in the fillable fields?

You start with a source / authoring file for the "static" content (e.g., Name, Last:). Say this is an MS Word file.
You master the "static" content..
You keep this authoring file and have a backup of this file.
You output a PDF and use Acrobat to build and fine tune the "form" (form = the form fields, not the "static" content).
The authoring file and output PDF (with form fields) gives you "rev 00".
Now, you must change something in the "static" content.
Open the authoring file and save as to a new version (e.g., "wordfile_v00" becomes "wordfile_v01).
Output this to "pdffile_v01".
Use Acrobat to open the PDF form file "pdffile_v00". Save As to a new file name ("pdffile_v00update").
Using Acrobat XI Pro the click-path Tools - Pages - Replace lets you replace a page or pages of "pdffile_v00update" with a page or pages from "pdffile_v01".
This replaces the "static" PDF page content and does not affect the form fields on the page.
(you may have to adjust position of form fields)
Save "pdffile_v00update" to "pdffile_v01" to reflect the revised status of the PDF form file.
Be well...

ISSUE: InDesign document automatically creating "imported" paragraph styles when you open the Layout.

Hi
I have an InDesign layout that contains multiple boxes, which all have style sheets applied to them.
There are a lot of unused styles on this layout too so these have been organised into folders.
When I close it and re-open the document, it creates all of the styles on the document again at the root level (not in the folder). However, it does not create them correctly, it simply makes them 14pt Times New Roman....
These styles look like they have been imported from Word (they have the little Floppy Disk icon next to their names). If you delete these and then save and re-open, they will be back there again.
However, if I remove them from their folders and place them at the root level, upon saving and re-opening, they won't be re-created (assumably because it can't due to a name conflict).
Any idea what would be causing it to want to create those styles every time?
The styles it has created:
Cheers
Rich

It's not actually linked to a word file.
I was just using that as a way of describing the link it seems to have.
Links panel only contains the link to the one image on the page

Alarm or notice when a Document is created

Similar Messages

Maybe you are looking for