An extra page prints before and after a page with the data, why?

If I go to www.allrecipes.com, select a recipe and click on the Print button, FF prints an extra blank page before and after the recipe. The recipe is short and easily fits on a single page. I've changed all the print settings so that even the Header & Footer info is set to "Blank".

I don't understand why blank pages are generated, but I can help you with a quick hack if you like. This will strip off everything but the actual recipe area so that you can streamline the printout.
After you load the page and select your options:
* Open Firefox web console using Ctrl+Shift+k
* Next to the caret (>) paste the following script then press Enter to run it:
var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]);
* Close the web console by pressing Ctrl+Shift+k again
When you preview the page, it should look ready for printing. Any luck?
Obviously that's not very convenient if you print a lot of recipes from this site, so you could save the script as a bookmarklet. Here's how:
First, copy this slightly modified script (select, Ctrl+c):
javascript: var rectbl = document.querySelector(".pageback table.recipeprinttable"); document.body.insertBefore(rectbl, document.body.firstChild); while(document.body.children.length>1) document.body.removeChild(document.body.children[1]); void 0;
Next, if you are not displaying the Bookmarks Toolbar, you can display it using either:
* right-click a blank area of the tab bar > Bookmarks Toolbar
* tap the Alt key > View menu > Toolbars > Bookmarks Toolbar
Right-click on the Bookmarks Toolbar and choose New Bookmark.
Paste the code into the Location box (the second box).
Then type a useful name in the Name box (e.g., AllRecipes) and click Add.
Now, when you want to hack the page, click the button to run the script.

Similar Messages

Can I print before and after on the same page?

Hi everyone.
I'm really proud of my editing on a particular image. I want to print the before and after on the same page, just like I can see the before and after side-by-side in the Develop mode.
Is this possible?
Thanks for your help.

Yes but you will need to make a virtual copy by going to the menu:
Photo >> Create Virtual Copy
Then open copy 2 in the Develop module and from the history panel change the setting to the time of import (usually the bottom of the list) or use the re-set button to get back to the original file from camera.
You can then select copy 1 & 2 and go to the Print module to set up your page with both images.

PSC 1210 page feed before and after printing

My PSC 1210 has been working fine for years but it has just recently started feeding a blank page before and after printing. That wouldn't be a problem except that the blank pages are not fully ejected, this means that I have to grab the first blank page, as it comes through the printer, and pull it out, otherwise it gets drawn back in causing a paper jam when the actual print job starts. Once this blank page has been removed the print job continues perfectly.
This occurs when printing documents, copying using the scanner, and printing a test page.
I have removed and reinstalled the printer driver/software and performed a partial reset on the printer, neither fixed the problem.

I see you mention that the issue also happens when you are copying, that means that this issue is not related to your printer software. So that's good to know!
Now, since this is not a software issue, this must then be related to your hardware. Is this printer plugged into a wall outlet directly or is it plugged into a surge protector? To be sure that the printer gets all the power it needs make sure that it is plugged directly into a wall outlet.
First things first, I would recommend unplugging the printer for about 30 seconds from both the back of the unit and from the wall outlet, and then plugging it back in. Try making a copy or print and see if the issue persists.
You can also try cleaning the paper feed rollers in the printer, here is a document that can show you where all of those are located and how to clean them.
http://goo.gl/glh8v
Let me know if any of this helps resolve the issue!

Bug: Before and After Margins Layout with section starting in right page

Hi,
I am using the Spanish version of Pages 09. I have observed that when I start a new section, I have no problems setting the layout margins (right, left, before, after) of this section.
But if a set that the new section must start in a right page, then the "before" and "after" margins of the layout doesn't work.
Is this the same in English versions of Pages?
Regards,

I see what you are saying.
The problem is Pages seems to have a memory of how you arrived at that layout.
When I construct the pages, it is correct.
I am trying to find out what is interacting in your layout to cause this to happen. It is like there is a hidden inaccessible layout break on the blank inserted page.
I have been tearing my hair out trying to work out what triggers it off. As I experimented with the combinations of settings in Facing pages, Section layouts and which page it starts on, it erratically switches back and forth.
This is why I gave up on Pages years ago as a serious layout tool. It has too many of these raw, poorly thought out interactions. I use a lot of different applications and none of them, that I can think of, have so many of these mind twisting raw oddities. Odd for a supposed user friendly application.
All the rest are pretty literal, you apply the settings and end up with a logical result of those settings. If the result is not what you wanted it is a matter of tracking what is interacting with what and straightening it out. Pages has the annoying "design" of inexplicably greying out functions for no stated reason, that prevents correction. Or hiding the access to the tools to those settings. You can only get to some of them if you have explicitly done something to make them possible. The rules as to what that "something" is, are not apparent nor in most cases explained in the User Guide or the User Interface.
There may be a "reason" why the function is greyed out but it is not revealed to the user without an enormous amount of detective work and as in this case my sleuthing abilities are failing me completely. I might try it again tomorrow after a rest (it is very late here). Either way it is a huge time waster.
This is fundamentally bad User Interface design and what I have railed against since Apple changed shifts, bringing in the OSX programmers who never really got the polished UI of the original Mac OS and have been cooking with Fanta* ever since.
Peter
* This is an anecdote originally told by Peter Russell-Clarke, a well known and creative Australian chef back in the 70's. He was berated in the street by a woman who told him that his recipe for +Duck à l'orange+ was "disgusting". When he cross examined her, he found she didn't eat fresh fruit so had made the orange sauce with Fanta.
I use this to try and get the message over to clients when they insist on "substituting" material because "what's the difference". The trouble with people who can't tell the difference is that they rarely ever do, no matter how carefully it is demonstrated to them.

GREP: How can I place a (for example) "*" before and after bold text with GREP?

Hi there.
I have a string of text as such:
I want to use GREP to insert a "*" (asterisk) before and after each bold part. Can I do that with GREP?
(if asterisk is a problem, I can use a different character)
Any help would be appreciated.

Hi Schmaltzkopf,
try this:
Have fun

My Mac Pro starts up when I turn on the power, BEFORE I switch it on with the button, why? Plus, my computer keeps freezing and blacking out.

My Mac Pro starts up when I turn on the power supply (when I plug it to the outlet), BEFORE I switch on the button on the computer, why is this happening? Plus, my computer keeps freezing and blacking out and I'm forced to restart it, that's when the compter starts on its own when I turn on the power.

Hello Engender,
I should have followed up with a progress report because I eventually eliminated all the problems I was having with my Mac Pro, now it's behaving like a new computer… beautifully. I did originally take Grant's advice above, changing the setting that I had in the System Preferences > Energy Saver but that only stopped from rebooting on its own when I shut down my Mac properly. Otherwise it continued to restart on its own after freezing or crushing when I switched on the power. I took my machine to the Apple Store and after many tests they couldn't find anything wrong with it. I was very depressed about the whole business.
It was after going onto many of the other Apple related websites that I discovered that it wasn't a faulty power switch or fan, as as I originally thought, but found out that my problem was related to the Graphic Card and possibly I did not have enough ram (I had the original amount of 2 GB). The original card that came with the computer: 512 MB ATI Radeon X1900 XT was over heating and forcing my machine to shut down, I think it was because I had upgraded to OSX Lion which on its own requires at least 2 GB of ram to operate well. I added 4 GB of Ram to the 2GB I had (4GB kit (2GBx2), Apple 240-pin FBDIMM, DDR2 PC2-5300 upgrades for Apple Mac Pro (4-core) 1st Gen. - 2006-2007 Desktop/PC, CT579443 from Crucial.com about $160 for the set) and replaced the Graphic Card with ATI Radeon HD 5770 1024 MB from Apple (around $260), (ATI Radeon HD 5770 Graphics Upgrade Kit for Mac Pro (Mid 2010) - Apple Store (U.S.)) This card works very well with my original Mac Pro 2008. I installed it about two weeks ago and no problem with it starting on its own, over heating or freezing. OSX Lion works well and I'm thinking of upgrading to Mountain Lion once I learn that my Mac Pro 1.1 will work with the new hardware I installed.
Your problem could just be the power cord but I agree with you that doesn't sound right, when I mentioned faulty switch I meant the part where the power cord meets the power button, the unit which houses the power distribution, I thought at first that it could be faulty but changed my mind because of the computer overheating.
I don't know if this is of any help to you but I hope your trouble will be solved with the new cord.

Hi why are my photos after downloading twice ,once in photo library and once in a file with the date why cant i delete a file its an iphone 4s please help

why are my photos after downloadon twice one as photo library the other as a file with date how can i delete one file same pics

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Can pages print a sheet of Avery labels, with the same address on all labels? If not, why not?

How do you print the same address on a sheet of Avery labels using Pages? If not, why not?

It is possible. Download the Pages template form here > Open the template in Pages. Fill in the desired information in the first cell. Copy the information (address) Hold the cursor down and scroll down one column of labels and hit paste > it should be highlighted. Repeat by highlighting the next column and paste. You probably using 30 up labels so there would be 3 columns. Hope that helps.

Am running Firefox 8.0.1 on a MacBook Pro running OS 10.5.8. The URL bar at the top of the page has disappeared and is inaceesible along with the arrows for navigating backwatd and forward. Please help.

Unable to scroll to top of page, as scroll tools are not active upon opening Firefox or a new browser window since this problem occurred. Home/startup page is set to Google Advanced Search. Would prefer not to have to re-install Firefox, if possible, as I have a lot of important data in Zotero and Bookmarks that I do not want to jeopardize.
Thank you for your help.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

IPhone 4 with iOS5, when I end a call and after sending a text, the data transmission "wheel" at the top next to the 3G icon turns for a few seconds.

This has only started since the IOS5 upgrade. Also, possibly unrelated, there has been a spam email sent from one of my yahoo email accounts to not only everyone in my contact list, but to anyone I have emailed from my iPhone (including those that I did not store email addy's in the contact list).

green for a few seconds before orange...normal.
normal for several seconds to pass before it indicates on the menu bar it is recharging.
Reset SMC
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Mavericks has changed some minor characteristics in how the battery indicator reports, youre right about same.
None of that however is related to the actual charging or discharging of the Macbooks lithium battery.

Before and after image question.

Dear all,
I have a similiar scenario below
something i got off from previous post*****
1000 10 10 (new)
1000 10 8 (changed in the next day)
then extractor will send like this.
first load means when the entry is created in the source system.
1000 10 10.
after change to 8. source will send the entry like this
1000 10 -2.
My question is, when i do a FULL LOAD into the next ODS, i keep getting only -2 as my result, not 8. How can i solve this in my update rule?

Hi again,
The delta records from an ODS always gets before and after images. For the full update, the records are always read from active table so this will only get the after image. Now suppose you are having wrong data in ODS2, you have to selectively delete the records from ODS2 and then do a full repair from ODS1. Incase of overwrite update rule, you need not do a selectively delete. So if ur data in ODS2 is wrong, delete it first and then do a full repair. You ran a full repai without deleting the already existing data and this might have created the problem.
Sriram

Mis-matched color in Before and After views

I recently purchased and installed LR 2.1 on a new HP 2.4 gb Vista 64 bit. 4 gb mem. Nvidia GeForce 9300GE card. Single LCD monitor. All updates installed.
While looking at an unedited Canon raw file in before and after I noticed that the gray was a little darker in the before view than in the after. I created a gray image in PS CS3 and took a look and it was the same.
This view can be very helpful but misleading if the colors will not match.
Any suggestions to a cure?
Thanks, Richard

Try generating a Matrix profile instead of a LUT-based profile (a setting in the i1 software I believe). Somebody else reported a problem in shadow colors when using LUT-based profiles.
There can be a difference because the before view is based on the preview which is usually stored as a jpeg in adobeRGB space and the after view is rendered from the linear prophotoRGB space that Develop uses. It is possible that you're simply looking at artefacts because of that.

OIM11g: Notification Event, before and after data elements

Hello
I have several notification events currently working correctly. I would like to, however, create a new notification event that contains the before and after value of a changed attribute.
For example: if user email address changes, notification should be similar to:
This is a notification that your email address has been successfully updated in the system. Old value: [email protected] New value: [email protected]
Notifications seem to only be fired as post process event handlers, process tasks, and scheduled tasks, is it possible to have both the before and after datasets available to the notification in any of these tasks?
Thank you.

If it's on a user object field, you can check for if the attribute you are watching is contained in the orchestration.getParameters(). If it is found, you can pull the old value out of the following:
HashMap eventDataHashMap = orchestration.getInterEventData();
Identity currentUserState = (Identity) eventDataHashMap.get("CURRENT_USER");
Then you can generate the email/notification however you'd like.
-Kevin

Before and After in Elements Editor

In the elements editor I choose to display both the before and after on the screen simultaneously. Each change to the photo changes both photos-rendering the before photo useless. Certainly that is not the intention.
HOW CAN I RETAIN THE "BEFORE" AND CHANGE THE "AFTER"?

John,
I assume you're talking about the "New View" feature. This isn't intended
to give a before/after view. It creates another window showing the exact
same image. The idea is that you can zoom in tight on a small area and make
corrections while seeing the overall effect at the same time in another
window viewed at a different magnification. You could also use it to show
two different areas of the same picture side by side for comparison while
working.
If you want a before and after, you can use the "duplicate image" feature to
make a copy of the file you have open. You could then place them side by
side for comparison.
Another way to to it is to create a blank layer at the top of the layer
stack and then press ctrl-alt-shift-e to merge all the visible layers and
place the composite in the new layer. Then you can toggle the layer off.
Work on the image as you wish. When you want to see the "before", toggle
the merged layer on.
I like to work with separate layers for each step. For example, if cloning,
I create a new layer and clone to the new layer. That way, I can toggle the
layer I'm working with on and off to see the before and after.
I've given you three ways to see a before and after. I hope one of them
will prove useful to you.
Bob

Status page before and after print jobs managed by Jetdirect.

Hey Guys I am receiving an extra page before and after every print job.
Printers are managed from Jetdirect Printer Installer for Unix Version E.10.34
Server has Sun OS 5.10
I have like 19 printers but only 5 HP CB516A are having this problem.
The Print Message displayed is :
Start: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
End: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
Its not a major issue but its a nuissance and wastes pages and ink
Any assistance for a resolution to this would be helpful.
Thanks.

@deff
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

An extra page prints before and after a page with the data, why?

Similar Messages

Maybe you are looking for