Another problem with G4 500mhz
Ok i solved my earlier problem with the power, now I have another. But this time its not real serious. Well as you know I bought my computer used from the highschool through a auction, well i finally got my computer to turn on, but now when it turns on, 2 user profiles pop up asking for passwords (one of them being a teachers side). And I have no clue how to get around this. So if theres any way please let me know. Thanks
Well… the nicest solution would be to reformat the drive and reinstall Mac OS X and the software you need to use. Thing is, I'm assuming you don't have have Mac OS X or software.
So, one thing you can do is to contact AppleCare (their number will be in Apple's support pages) and have them send you out a replacement copy of the installation discs. They'll charge you a nominal fee for doing so but I highly recommend you do this.
That'll get you started.
If you want to do anything tricker than that you will probably need some else's help as well as the help of their Mac. Otherwise, you can just duck down to an Apple Store/Reseller and get yourself a copy of Mac OS X 10.4 (Tiger) and iLife 06. More expensive although will be all current versions rather than the Mac OS X 10.2 (Jaguar) that comes with a 500MHz Titanium.
Similar Messages
-
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
Another problem with SOAP sender
I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this.I have another problem with SOAP scenario in a different environment (PI 7.0) from my earlier post.
Scenario:
Soap Sender -> PI -> Soap Receiver
Following steps from GoogleSearch SOAP scenario in the SAP How-to Guide for SAP NetWeaver '04 entitled: "How To... Use the XI 3.0 SOAP Adapter" version 1.00 - March 2006.
I have loaded in the api.google.com/GoogleSearch.wsdl file as an External definition and created the SOAP receiver as described in the How-to guide. It takes a doGoogleSearch as input and sends back a doGoogleSearchResponse (Sync Call).
Note that the GoogleSearch.wsdl contains a complex type ResultElementArray that refers to ResultElement\[\], and a DirectoryCategoryArray that refers to DirectoryCategory\[\]. The ResultElement and DirectoryCategory types are defined in the GoogleSearch.wsdl file.
Problem One:
The generated WSDL for the SOAP sender contains the ResultElementArray and DirectoryCategoryArray types but it DOES NOT contain the required ResultElement and DirectoryCategory types. XML Spy complains that this WSDL is not valid because the type ResultElement\[\] is not defined.
Problem Two:
I generate a SOAP message in XML Spy, provide values for the doGoogleSearch fields, and send. In SXMB_MONI, the SOAP sender payload contains only the <key> value from the doGoogleSearch message body, i.e. <part name="key" type="xsd:string" />
The other doGoogleSearch fields seem to be missing, i.e.
<part name="q" type="xsd:string" />
<part name="start" type="xsd:int" />
<part name="maxResults" type="xsd:int" />
<part name="filter" type="xsd:boolean" />
<part name="restrict" type="xsd:string" />
<part name="safeSearch" type="xsd:boolean" />
<part name="lr" type="xsd:string" />
<part name="ie" type="xsd:string" />
<part name="oe" type="xsd:string" />
Does anyone know why:
(1) PI/XI seems to leave out the ResultElement and DirectoryCategory types from the SOAP sender service WSDL file?
(2) The doGoogleSearch message seen in SXMB_MONI contains only the first <key> field, and not the other fields?
Thanks for any help with this. -
Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..
sorry for my bad english ..
-
Is this yet another problem with 7.5 or is it just me . . .
Upgrade seemed to be fine, at first . . . now I keep getting distortion on songs. It seems to be quite random and just because a song has been distorted when I've listened to it once doesn't mean it will be when I listen to it again! It's driving me insane. Is this yet another bug or have I done something wrong (apart from upgrading to 7.5).
Hi Emlou,
If you have a Windows based operating system such as XP -
It seems to me that you are suffering what I am having the same problem with - the program takes up to much of your computer's processing usage. If you go into your task manager and watch performance as ITunes runs - you will see how much of the total computer usage it is taking at any given moment - that's why your songs are distorted, slowing, garbled, etc - the usage on mine spikes from 11% - 93% AT ANY GIVEN MINUTE! I have no idea why, but I have found that by going to your "Control Panel" and clicking on Quicktime you can adjust audio output to help. Click the audio tab, click Safe Mode Wavout only (checkbox) / Then adjust the "Rate" to 96kHz / Then adjust the "Size" to 16 bit. Close that and shut down and restart Itunes - it might help a little for you.
Maybe someone out there can help us find out why we are suffering with all the CPU usage trouble and how to adjust that spiking.
Thanks!
Paul -
(Another) Problem with HP Photosmart - reinstallation
I have a Photosmart C5280 All-in-One and a MacBook Pro, with 2.4 GHz Intel Core 2 Duo processor, using Mac OS X 10.4.11.
Scenario this morning:
The printer will photocopy, but there is no connection between the printer and the computer, it is not a problem with the usb cable connection. The computer will not send anything to the printer to print, and the scanner will not end anything to the computer.
I repaired permissions using disk utility at least three times this morning. (I do it fairly often anyway).
Scenario now:
I have now uninstalled the software, using the HP uninstall programme, but then deleted the remaining items manually as instructed in the section on the HP site for Macs and uninstallation. I have also emptied the trash.
Sadly however, it has made absolutely no difference. Whenever I put the installation disk into the CD drive, I can only get as far as identifying the printer. There are no printers listed, and when I tick the box, it comes up with Photosmart C5200 Series, which is correct. But the next continue box is then greyed out. (I'm wondering if following the HP instructions was such a good idea now).
I am now stuck. I have uninstalled and can not reinstall. I have used these two together for the past year (or more) without any problems. When I initially installed, it worked fine. No problems at all. I have not recently changed any software or upgraded anything on the OS. The two were communicating last week, when I did some scanning and printing.
Confession: I had the first problem (no scanning/printing) a couple of weeks ago, and decided to look in trash to see if I had mistakenly got rid of something and found an hp file in there. Pulled it back out. All worked fine again. But today, total blip, and no hp files in trash.
I would be grateful if anyone could suggest a solution. I'm capable of following instructions. Oh, I have mailed Hp, but I've had no response so far. I have also looked through the stuff on here, but haven't found a similar problem, ie the connection just disappears into the ether.I had a response from HP:
1) Was the printer powered on? It needs to be turned on.
2) Was the USB plugged directly from the back on the printer to the Mac? You are not using a hub, airport or a USB cable more than 10 feet long?
3) Power cycle the printer. Disconnect the power cord from the back of the printer. Wait 10-15 seconds and reconnect the cord. Power on the printer. Was it found?
4) If not, restart the Mac. Once you are back up, if the HP setup Assistant does not automatically launch you can launch it by clicking on Hard Drive > Applications > Hewlett-Packard > Utilities or Device Utilities > HP Setup Assistant. Double click to launch. Was it found?
5) If not, plug the USB cable into a different port on the computer. Was it found?
6) If the printer is still not found, check the system profiler for the device. Click on the Blue Apple in the upper left corner, then About this Mac. On the next screen click on More Info. On the System Profiler screen, click on USB under Hardware. On the right is the printer found under USB device tree?
7) Another thing we need to check is when you installed the software did you select the correct device. The newer printer software may contain multiple products. If you did not select the correct device during the install, the computer is looking for a different device and not finding it. To check this, run the HP uninstaller. Open Hard Drive> Applications > Hewlett-Packard > HP Uninstaller. When you get to uninstall selected device, what printer is listed. If it is not you model series, run the uninstaller. Quit the uninstaller when complete, disconnect the USB cable and restart. When you back to the desktop, empty the trash, and reinstall the software. Wait for the option to select your device!
I want to be sure the troubleshooting steps I provided resolve the issue. If the issue continues, please reply to this message with the results. We will be glad to assist you further.
It was not unreasonable, but I had checked the box that said Intermediate (level of computer knowledge) - so I thought asking me if the printer was turned on/checking the ports/ etc etc was a little basic.
However on browsing this forum for similar probs I noticed a reference to Printer Setup Repair (it may have been one of your suggestions BDAqua to a different problem) so downloaded it for a free trial. Although I regularly verify and repair permissions with disk utility, I tried with Printer Setup Repair, and got this message:
Monday, December 15, 2008 12:16:04
Starting permission verification and repair, omitting localized files...
The file /private/var/log/cups/page_log is missing!
The directory /usr/include is missing!
The directory /usr/include/cups is missing!
The file /usr/include/cups/cups.h is missing!
The file /usr/include/cups/http.h is missing!
The file /usr/include/cups/image.h is missing!
The file /usr/include/cups/ipp.h is missing!
The file /usr/include/cups/language.h is missing!
The file /usr/include/cups/md5.h is missing!
The file /usr/include/cups/ppd.h is missing!
The file /usr/include/cups/raster.h is missing!
Recreating symbolic links...
Done.
Verification complete.
837 files examined. No problems were found.
11 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
That message would explain why, the last time I had a problem, it was resolved with reinstalling OS X. What I don't understand is why a file suddenly disappears? Perhaps I need to move my queries to one about OS X? (I have OS X on my other Apple and no probs there.)
Anyway, thank you for your responses and if you have any further advice or suggestions, I would be happy to hear.
ST -
when connect my ipad a my rmbp 15" appears this message "iTunes could not connect to this iPhone. This device is no longer connected." and ipad is connected and disconnected all the time. but when connect the Ipad in my rmbp 13" not have a problem.
Please I need help. i hope not to have another disappointment with apple product.iTunes could not connect to this iPhone. This device is no longer connected.
iPad 2 7.1.2
iTunes 11.3 (54)
iMac 27 in 10.9.4
Follow these steps to resolve your issue for iPads
Troubleshooting time is about 30 minutes - 1 hour
Step 1
Unplug the usb 2.0 cord from the 27 in iMac and iPad 2 64 GB (or what ever version you have) Power down the iPad
Step 2
Select your HD (Hard Drive) ( I did this form my desk top)
Next select the applications folder, Next right click the iTunes icon and select show package contents, select Contents.
1. Next select info.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
2. Next select pkginfo, right click and select move to trash. (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
3. Next Select version.plist, right click and select move to trash (A message should appear Finder wants to make changes. Type your password to allow this)(Enter your password) Select ok, (This moves the file to the trash).
4. Remove "iTunes" from your dock
5. From the Finder, choose Go > Go to folder.
6. Type the following and then press Return: /var/db/lockdown
7. Choose View > as Icons.
8. The Finder window should display one or more files with long alphanumeric file names.
9. In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted. Note: Do not delete the Lockdown folder itself.
Delete only the files contained inside the Lockdown folder.
Step 3
Follow the below steps to troubleshoot the issue.
1. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
2. Click Go.
3. Locate the file "com.apple.usbmuxd.plist~orig" and drag it to the Trash. (Do not move the similarly named "com.apple.usbmuxd.plist" file to the Trash.) If you DO NOT HAVE file "com.apple.usbmuxd.plist~orig" I DELETED THE FOLLOWING (com.apple.usb.plist)
4. In the Finder, locate iTunes in the Applications folder and drag it to the Trash. (This will not remove any of your iTunes media or your iTunes library.) You may be presented with the following message “iTunes” can’t be modified or deleted because it’s required by OS X.) Do not worry click ok and proceed troubleshooting
5. Choose Go > Go to Folder. Enter the following location into the text field that appears: /System/Library/Extensions
6. Click Go.
7. Locate the file "AppleMobileDevice.kext" and drag it to the Trash.
8. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/PrivateFrameworks
9. Click Go.
10. Locate the folder "MobileDevice.framework" and drag it to the Trash.
11. In Finder, click the Go menu and then choose Go to Folder. Enter the following location into the text field that appears: /System/Library/LaunchDaemons
12. Click Go.
Step 4
Goto your hard drive in the finder
1. Goto Library
2. Goto Launch Daemons
3. Throw this in the trash: com.ghughes.wifisync.root.plist and anything with the words iTunes
4. Goto Library
5. Goto Application Support
6. Throw this in the trash: Wi-Fi Sync (it's an entire folder) and anything with iTunes
Step 5
(Before restart book mark the link command and D). Restart the Mac.
Download iTunes and reinstall it. After the install, connect the 2.0 usb device to the iPad 2 while the unit is still powered off, next connect the 2.0 usb cord to iTunes, power the iPad on. iTunes will read the device and ask to trust device, select continue. Backup the iPad device to the 27 in iMac.
Step 6
Please Rate if it helped you! After that have a cold hard drink and enjoy the day -
Ok, so recently I just posted that I had a problem with mem... here is another. I just checked how much memory I'm using and it says I'm using 989 out of 1 gb.. is that normal? It was 504 about an hour ago and all I have open are Adium and Safari..
The two important questions are 1) how much is inactive and 2) how many page outs are you showing in virtual memory. In fact, the second question is the one to key on. The number of page outs will indicate how often your computer has tried to access more memory than it has and as therefore been forced to copy RAM contents to the drive so it could perform the task it was asked to do. This is when your computer is being slowly choked to death.
Now don't just open the Activity Monitor, look at the Page ins and Page outs and panic because you have 30,000 page outs. Keep in mind that's an accumulative number and if your Mac hasn't been restarted for 90 days, well that number may not be relevant at all. So restart the computer, and use it as you normally do. Then check the status of Page Outs at 30 minute intervals. The faster the Page Outs mount up with your normal usage the more you'll benefit from an upgrade. -
Another problem with "plxcore.plx"... what the hell is it f
ahoi!
i have the audigy2 zs.
as i had problems with my 3d sound i reinstalled my sounddrivers, i got this problem about "plxcore.plx wasn't found blah blah", i used google and read how to fix it, next time i reinstalled driver i copied the file into the correct folder during the installation-process so that the error notification didn't appear.
so far.
but when i now want to open my eax-console, i got the first time a notification from my firewall that "dr. watson postmortem debugger" is being launched, i said "ok", nothing further happened. when i later tried to open the eax-console, my cursor turns into that hourglass, but it still wasn't opening. i tried it via start-menu, via explorer and via the speaker options; of course i tried re-installing and updating the eax-console, too, but i was not successfull in solving my problem.
last thing i tried was renaming "plxcore.plx" to "_plxcore.plx". i just thought that this little fellow was the problem during the installations, so it might cause my latest problems, too. and actually, after renaming it, the eax-console opened. so i ask you: do i really need this file? what is it for?
i haven't got any problems until now, it's just that when i am re-renaming the file back to "plxcore.plx" it isn't working again... weird O_oMessage Edited by Quichybo on 09-4-2005 02:09 PMokay, now i recognised that i dont have real eax anymore, it happens that when i start an programm that uses eax, for example unreal tournament 2004, i just have no sound. what a shame.
plxcore.plx is just in that temp directory i extracted it to when i had to do it manually cause it was needed in the installation.
than i have the renamed version in the shared files directory in my creative folder...
both were last changed at :09, on 2th november 2002
edit:
WOOOHOOO!
great, i just checked when he last READ the file and i saw that it was still in use (i mean the file in that temp directory), i deleted it and i now have full eax in UT2004
let's hope that my computer will survi've a reboot...
i will try now, if i aint gonna edit this message for some hours u will see that it didnt work. see you!
okay, it worked, nice one and thanks for your help so far. but i still would like to know what you were up to and if i will need that *not good* file for some process except uninstalling..Message Edited by Quichybo on 09-4-2005 04:43 PM -
Another problem with updating in ms access
Hello there,
Me too has a problem with the update statement and ms access (using 2003).
I've read many other problems, but a way to the solution that worked for I didn't found :S
The strange thing with my problem is that i'm able to update integer fields in the database, but not varchar/text fields.
I'm not getting any exception back, the database is closed (i'm very sure), so HELP! :)
I'll show you the code i'm connecting with the database:
public void openDatabaseConnection() {
// Eerst controleren of de DatabaseDriver wel aanwezig is.
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch (Exception e) {
System.out.println("Looking for Class: " + e.toString());
// Nu kan de connectie met de database opgezet worden.
try {
theDatabaseConnection = DriverManager.getConnection("jdbc:odbc:Shawa","","ShaBaMa");
catch (SQLException ex) {
System.out.println("openDatabaseConnection: SQLException: " + ex.getMessage());
System.out.println("openDatabaseConnection: SQLState: " + ex.getSQLState());
System.out.println("openDatabaseConnection: VendorError: " + ex.getErrorCode());
}The code for updating an integer field (wich is working!) is like this:
public Customer cashCustomer(Customer aCustomer){
PreparedStatement pstmt;
ResultSet result;
try{
openDatabaseConnection();
pstmt = theDatabaseConnection.prepareStatement("UPDATE customer SET aantal_bier = aantal_bier + ?, aantal_fris = aantal_fris + ? WHERE id=?");
pstmt.setInt(1, aCustomer.getCashBeer());
pstmt.setInt(2, aCustomer.getCashSoda());
pstmt.setInt(3, aCustomer.getId());
theDatabaseConnection.setAutoCommit(false);
pstmt.executeUpdate();
theDatabaseConnection.commit();
pstmt.close();
theDatabaseConnection.close();
catch (SQLException eSql){
System.out.println("Cash Customer: " + eSql.toString());
System.out.println("Cash Customer: SQLException: " + eSql.getMessage());
System.out.println("Cash Customer: SQLState: " + eSql.getSQLState());
System.out.println("Cash Customer: VendorError: " + eSql.getErrorCode());
return aCustomer;
}Now the code for updating Varchar/text fields (wich is not working):
public Customer editCustomer(Customer aCustomer){
PreparedStatement pstmt;
ResultSet result;
try{
openDatabaseConnection();
pstmt = theDatabaseConnection.prepareStatement("UPDATE customer SET name=? , lastname=?, onderdeel=?, aantal_bier=?, aantal_fris=?, op_kaart=? WHERE id=?");
pstmt.setString(1, aCustomer.getName());
pstmt.setString(2, aCustomer.getLastname());
pstmt.setString(3, aCustomer.getSection());
pstmt.setInt(4, aCustomer.getBeer());
pstmt.setInt(5, aCustomer.getSoda());
pstmt.setInt(6, aCustomer.getId());
pstmt.setString(7, aCustomer.getAddCash());
theDatabaseConnection.setAutoCommit(false);
pstmt.executeUpdate();
theDatabaseConnection.commit();
pstmt.close();
theDatabaseConnection.close();
catch (SQLException eSql){
System.out.println("Updating Customer: " + eSql.toString());
System.out.println("Updating Customer: SQLException: " + eSql.getMessage());
System.out.println("Updating Customer: SQLState: " + eSql.getSQLState());
System.out.println("Updating Customer: VendorError: " + eSql.getErrorCode());
return aCustomer;
}I can add and delete from the database. The thing with the ' ' didn't work for me too.
Anybody a solution for me??? plz plz plz!You are updating zero records. Because you are filling in the parameter ofWHERE id=?with this code:pstmt.setString(7, aCustomer.getAddCash());The executeUpdate() method returns the number of records affected, if you wish to check that.
-
Another problem with audio dropouts in PrE 10
G'day All,
Earlier this year I had a problem with Premiere Elements where audio files from AVC HD clips dragged in from my camcorder were dropping out.
http://forums.adobe.com/message/4267924#4267924
Bill Hunt was able to help me out at the time by confirming that the files weren't conforming - boom boom! That is, all the clips I wanted had been dropped in, but the conforming of the videos had not completed, because I never noticed the little blue progress bar lower-right.
As advised, I tracked down the dodgy PEK and CFA files that had been created incomplete, deleted them, dropped the clips back in to the project, went and made a cup of tea until the blue progress bar stopped running, and the problem was solved.
Now it's back. Not only that, but I cannot find any PEK or CFA files relevant to the project where the problem is occuring. A search yields no results for such files on my hard-drive for today!
(I also note that all such files now seem to have shifted to being stored elsewhere on the harddrive, and not in the originally nominated 'scratchpad' where they were stored during the first round of difficulty.)
I deleted all files and folders I could find that were created today associated with the project the problem occured in, and the project istelf, rebooted, created a new project, and dragged the original videos into it. No conforming occurred! Sound dropouts are identical. Somewhere on my system it would appear that some faulty conforming record relating to these files has been created, but I have no idea where it is, or why it no longer appears to be stored as a CFA of PEK file.
Any ideas? It's doing my head in!
regards,
BillHello JJVANKA,
it might be that the %%pluginname%% plugin is possibly outdated. Could you please check the following:
#Go to [http://www.mozilla.com/en-US/plugincheck/ the Mozilla plugin check site]
#Wait for the plugin check to complete.
#If any plugin is outdated, go to the Website of the plugin to download a recent version!
Kind regards,
Tobbi
Firefox Support Volunteer -
Yet again another problem with Firefox Beta and Hotmail
So, I think the new version of firefox 4.XXX does not like hotmail or vice versa. When in hotmail and composing a new message, I cannot add attachments at all. I once again verified that I had this ability in the most current version of Firefox and in Safari. Everything works fine. Did the usual junk, dumped my cache, etc. And I am still having a problem with the calendar not loading. I use to work in IT in a support function and I can clearly tell you that the new browser does not like Windows Live/ Hotmail, whatever you want to call it. It is broken, so please fix this because I like the new browser other than the hotmail issues.
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
LR4 Beta...another problem with using Lens Correction
Not sure if it's me or the beta. I'm trying to do a lens correction on a file that was edited in CS5. The photos were taken in 2009/10. They are importing as Process 2012.
I'm using the Lens Correction in manual. About 15 seconds after I start using the sliders, my LR stops working and I have to close the program (white outs the screen with the note saying the program has to be closed).
I do know there can be problems with a beat so I wanted to post this problem in case it is a bug in the system.I have the same probem if I try to push the scale slider down below about 87%. It is quite annoying when it keeps happening on the same photo. It's not something I use a lot but it can be necessary with tall buildings when the correction pushes the top out of the frame.
JW -
Another problem with soundworks 740 cd radio.Speakers this t
Hi all,I experienced the problem already listed about this unit accepting a second cd when it already has one. Initially I was told to turn the unit upside down on my knee and bounce it up and down whilst pressing the eject button :smileyvery-happy:-This DID work!! at least for a couple of occasions then I finally had to send it off and had a replacement sent. My problem at the moment is that this replacement(which worked fine for 8 months,outside warranty now)has suddenly stopped producing any sound.Nothing with either cd or radio,no hiss or crackle or faint sound-nothing.Has anyone had this problem and did anyone fix it themselves or get someone local to do it'sI contacted creative labs and because it was out of warranty their only offer was to send it back for a service at a cost of ?94! +postage.You can pick one up for roughly that amount new off e-bay at the moment. I think I'm going to stop buying STUFF because it always breaks down-I'm going to li've in the woods in a tent with just the dawn chorus as a musical background,but?knowing my luck?they'll probably all get bird flu!
Hi Muskrat,
Sadly ?I am experiencing the same problem with the speakers of my two and a half year old Radio CD740?as you had. Almost overnight the sound completely disappeared and I found the only way to hear anything was to use ear phones, which defeated the object - good stereo sound,?supposedly to compete with Bose. The unit has had little use and I do not believe the fault?has been caused by misuse or even normal wear and tear, it is obviously some weakness in the design.
I have contacted Creative and they just don't want to know, in fact they sent me a link to a reconditioned Radio CD 745 on their web site. :angry:
Just wondering if you ever found a solution to the problem (apart from binning it!), and if you did, can you help? -
ANOTHER problem with 2.6 kernel
Damn you -mm4, I knew it was too good to be true.
On -mm4 (not -mm3), Whenever trying to boot into it through LILO, it says the root filesystem isnt found, and I have to apped a "root=" manually to get it to boot.
The root= entry in lilo.conf is correct, why cant it find it with the config, but it can with manual entry?!
Im thinking it has something to do with devfs, but I dont know.
PS. Why does Arch use devfs? Ive had nothing but problems with it, and its obsoleted in the 2.6 kernel.contrasutra wrote:PS. Why does Arch use devfs? Ive had nothing but problems with it, and its obsoleted in the 2.6 kernel.
because devfs is better than a static /dev section which forces piles of pointless device files upon you.
as for devfs being "gone" in 2.6...its not it has been rewritten and now goes by a different name but with almost the same functioning.
personally i think devfs is better than both static and what i was reading about the "transformed" devfs in 2.6. maybe that is why i can side with the kernel developer departing the kernel crew that created it.
as for your problem....sounds like a lilo issue and not a devfs issue as you are saying a manual entry works if it was a devfs issue then appending root= would not work either.
Maybe you are looking for
-
my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta
-
Hi, I hope someone can help. My DVD ROM is in my device manager but I can seem to reload the driver or find anywhere that can help me locate and download it. I deleted it from the device manager and then had windows search for it and the driver but
-
Hello I have an iPad 2 for 4 months now, and I've added several music, apps, videos and other media in the device. And I've realized last week that my iPad 2's startup (from sleep) / opening, is slow for my opinion (1 second just after clicking home
-
Adding a perl script to automator
Hi I have a script that do a search and replace in a file in Perl. This script work just fine when executed from the command line, but in automator it result in an empty file. Any idea? Eventually I want to replace the $file variable with the argumen
-
Hp photosmart 5515 blue won't work...
Hi, For the past 4 HOURS, I have been trying to print my **bleep** pages in colour. Everything works EXCEPT blue. I have replaced it with 4 new cartridges, thinking it was my ink. It's not. I have now wasted 4 hours of my time, around 100 sheets of p