Any BAPI or FM to release an Internal Order
Hi,
I am uploading internal orders from legacy system to SAP. The default status that is required for these internal orders as released.
Is there any BAPI or FM to release an internal order?
Rgds,
Ashish
Hi Rau,
Thanks for your input.
Well, doing at order type level will set the status released for those orders too which will be created into SAP system.Here we need to set status released for only those which we are uploading from legacy.
Planned to used BAPI but since for settlement rule i am getting only two fields category & settlement receiver which are not there in BAPI interface structure thus going for a custom program which will use BDC.
Rgds,
Ashish
Similar Messages
-
BAPI to release a Internal Order CO
Hi,
i need a BAPI to release a Internal Order CO
thanks
regards
DayanaThanks for the reply.
In these BAPIs..or FMs...we can add one material or a component...
I want to add a main material...as a first one..
then a component of it....so it goes on..
say i have a main material and 10 components needed and created in a single production order...
any info??? -
BAPI for Depriciation simulation data of Internal order(Investment tab K01)
Hi experts,
I am new to asset accounting.
I have to a requirement where in the Asset class(ANIA-ANLKL) and capitalization data(ANIA-AKTIV) will be provided to me in an input file for a particular internal order(AUFK-AUFNR) and through my custom ABAP code i have to create Depriciation simulation data for that internal order.
is there any BAPI/FM by which Depriciation simulation data for internal order can be created ??Hi Heidi,
I also have the same requirement as yours above. have you had an answer already? If yes, could you please share how can you deal with this requirement?
Appreciated your help,
Huyen -
BAPI KPF6 POST PLAN COST FOR INTERNAL ORDER AND COST ELEMENT
Hi all gurus,
I would like to use in a custom report a BAPI/Function Module that help me to simulate KPF6 in order to post planning costs for internal order and cost element (layout 1-401).
So the input should be:
1) Version
2) period from
3) periodo to
4) year
5) internal order n.
6) cost element n.
7) value
I found a lot of BAPI but don't know the correct one and how to use it (example how to fill the input value).
Can anyone help me on that?
Kind RegardsIn additio to the previous I found the BAPI_COSTACTPLN_POSTPRIMCOST but don't know if it's the correct one and how to use it (some example fitting the my case will be very appreciated).
If the quoted BAPI is correct.
I tested it filling all fields as following:
HEADERINFO:
CO_AREA=FFCA
FISC_YEAR=2008
PERIOD_FROM=001
PERIOD_TO=012
DOC_HDR_TX='blank'
INDEXSTRUCTURE:
OBJECT_INDEX=000001
VALUE_INDEX=000004 (hope this point at Interna Order)
ATTRIB_INDEX=000000
COOBJECT:
OBJECT_INDEX=000001
ORDERID=ZO53-08IMZ
TOTVALUE:
VALUE_INDEX=000004
COST_ELEM=3224048
FIX_VALUE= 200,0000
DIST_KEY_FIX_VAL=2
The Return table is set to 0. Nothing happens.....I suspect something related to indexstructure or index is wrong..
Could anyone help me on that?
Kind Regards -
I am trying to find a function module or BAPI for internal order change. I
I am trying to find a function module or BAPI for internal order change. I did come across a function module ALE_INTERNALORDER_DB_CHANGE which directly updates the internal order using insert statements. Can i use this for internal order change or this is any other Function module for updating the internal order.
I dont want to use BDC as a option. Please suggest.This is possible using the Rotator Component Widget from Infosemantics.com.au but it is only compatible with SWF output, not HTML5.
Go to this page and scroll down to the video tutorials about the Rotator Component widget:
http://www.infosemantics.com.au/adobe-captivate/youtube-video-tutorials -
Automatically creation of Asset from Internal Order(IO) when Released
Dear experts,
In my scenario, we are using IOs (not WBS). When I budget and release the Internal order, it should automatically create the Asset/Asset class(Not AUC)( as in WBS,if we assign Investment Profile).Could this possible?coz' I have not seen the Investment profile as such in IO.
guide me.
Thanks,.
Sanju.You have to define investment profile and assign the same to you Internal order the same you can achieve Txn OITA . ( viaSPRO->IM>IO&IM>Masterdata--> Define Investment profile )
After you have to assign the same to your order .
http://help.sap.com/erp2005_ehp_04/helpdata/EN/2a/f9f588493111d182b70000e829fbfe/frameset.htm
Regards
Nitin -
Bapi : Is there any BAPI to CANCEL / BLOCK a Purchase Order
hello everybody,
can anyone tell me if there is any BAPI to cancel or block a Purchase order.
Note : blocking of purchase order is done on item level of the PO.
Regards
SwanandHello,
in BAPI_PO_CHANGE:
Field DELETE_IND in structures POITEM and POITEMX.
It's reference is to data-element ELOEK: Documentation to this:
<i>Text
Deletion indicator in purchasing document
Definition
Determines whether the item in the purchasing document is deleted or blocked.
Use
You can set the deletion indicator by choosing Edit -> Delete if:
You want to cancel an item
An item is closed and can be archived
You can set the blocking indicator by selecting the item and then choosing Edit -> Block if you do not want to allow subsequent functions for the item. Note that you must manually remove the indicator as soon as subsequent functions are allowed again.
Examples
You have entered a purchase order item by mistake. You cancel it by setting the deletion indicator.
A purchase order item has been delivered, invoiced, and paid for, and can now be archived. You can set the deletion indicator.</i>
Regards Wolfgang -
When I am creatin an internal order. I can create an internal order and then release it without going to KO02 to change.
Is this possible to just NOT to release an internal order... after just creating it.
Basic requirement is KO01 should just create and KO02 is for releasing.
But KO01 just after creating , when using the general status management before saving the internal order , I can release the order as well. I wanted to not release the internal order before the order is created and saved. Is there a possibility to do this ??Because We need a control over the prcoess, and according to the roles... KO01 who can create an internal order cannot release an internal order. This is what we are trying to achieve.
Thanks,
GB -
BAPI to maintain Internal Order
Hi.
Which BAPI I can use to maintain internal order?I know there is BAPI_INTERNALORDER_CREATE for create.If there is no BAPI for this, then how can I maintain it?Using BDC?Hi,
I could find ALE_INTERNALORDER_DB_CHANGE function module. I have not used this myself, plus this one looks like making changes to DB. So please analyze the impacts, before using this one for changes.
Regards
Sreekanth -
Hi Experts,
I am facing a strange problem in SAP. I have a scenario where I am integrating a .Net application with SAP R/3 via SAP XI.
The .Net application is calling XI web service via SOAP adapter. The XI then sends the data to the SAP R/3 system via RFC adapter.
XI calls the BAPI u201CBAPI_INTERNALORDER_CREATEu201D to create a new internal order in the R/3 system.
This scenario works perfectly fine when tested via XIu2019s runtime workbench or any SOAP or web service testing tool. New internal order gets created in the R/3 system without any issue. But when I test the same via the .Net application I found that the order is getting created properly but some fields like currency and cost center are disabled or grayed out in change mode. Have you encountered this problem earlier? Any clue what could be the root cause?
Please help!
thanks
GopalHi Sampanth,
I think you did not understood my scenario. In real time or production situation I have to use .Net application to send data to XI. The XI will then send the same to R/3 system to create the internal order.
The .Net code is calling the XI's webservice using C# code and sends the data as a SOAP request.
How can .Net code grayout some fields in SAP R/3 system? Can you elaborate on what are you trying to explain?
Thanks
Gopal -
How to create internal order using bapi_internalorder_create
Hi,
Am new to bapi , i need complete procedure regarding internal order creation using bapi function module
BAPI_INTERNALORDER_CREATE
If any body have steps regarding create plase forward to my mail [email protected]
Thanks®ards,
Arun.kArun,
Just Pass the required data as an ordinary Function module.It will create the internal order .
DATA : I_MASTER_DATA like BAPI2075_7,
E_MASTER_DATA like BAPI2075_2,
EXTENSIONIN like BAPIPAREX occurs 0 with header line,
ORDERID like BAPI2075_2-ORDER,
TESTRUN like BAPI0012_GEN-TESTRUN,
SRULES like BAPI2075_6
occurs 0 with header line,
RETURN like BAPIRET2
occurs 0 with header line.
CALL FUNCTION 'BAPI_INTERNALORDER_CREATE'
exporting
I_MASTER_DATA = I_MASTER_DATA
TESTRUN = TESTRUN
importing
E_MASTER_DATA = E_MASTER_DATA
ORDERID = ORDERID
tables
SRULES = SRULES
RETURN = RETURN
EXTENSIONIN = EXTENSIONIN
exceptions
OTHERS = 1
Pls. reward if useful. -
Internal Order, Capital investment order enduser documentation
Can any Guru send me enduser documentation for Internal order of type Capital Investment? Email: [email protected]
Thank you!Hello,
the little late answer to your question is the table IMZO. It links the investment program / positions to internal orders. I found this thread while searching for my own problem which is quite the same:
In my WebDynpro for ABAP investment planning tool I'm using the FM BAPI_INTERNALORDER_CREATE to create internal orders as a result of the planning process. This BAPI is similiar to the transaction ko01 except that I can't assign an investment program / position to my internal order (this is also pointed out in the help to the BAPI/FM).
But how can I assign an investment program / position to my internal order NOT using an ABAP insert/update statement on the table IMZO (which links the internal orders and investment programs/positions).
Does anybody know a FM or BAPI I could use? I really don't like the idea of a self made insert/update into a sap table...
Thank you in advance,
Christian Bracht -
Maketing Plan & Campaign link with ERP Internal Orders
Hello,
I have a requriemnt where we need to do maketing Planning & budgeting . We will create marketing plans & Campaings in SAP CRM but will store planning data in SAP ERP Internal Order due to some reason.
My question is: is there any way to link Marketing Plan & campaigns from SAP CRM to SAP ERP Internal Order. We can not use SAP ERP PS (WBS) intergation due to project limitation.
Thanks in advance,
Sufiunfortunately, the standard function doesn't support use internal order with campaign
so if you need to realize it ,I think you can build a customize field in campaign to fill the internal order, and store the link in your customize table.
If any expense happen on your campaign, you need to create your FI document through some BAPI to FI, and fill the internal order this the BAPI. I believe you need to develop this functionality, as the standard design doesn't include this -
Internal orders to WBS Element
Hi,
I,m working in a Project System implementation project, where all other modules are already in use.As per the existing process, Internal orders are created for asset accounting.Those are of statistical. All the purchase orders & costs are booked referring to the internal orders, the same cost is directly settled to Asset Under Construction or Asset.As the internal orders are created as statistical, there is no seperate settlement process & all the costs are directly settled either in AUC or in Asset as & when they are incurred(posted).
Now as we are implementing Project Systems, Internal orders are going to be replaced by WBS Elements. Customer requirement is the same process of online settlement of costs to Assets from WBS Element & he doen't want to settle seperately.
Now the issue is, 1) how the process can be mapped in SAP?
I feel creating the WBS elements as statistical, the same process can be mapped. Is it possible/
2) As one project is already in progress & some postings have been taken place against internal orders, customer wants to see all those postings on new WBS element, now how to migrate the same to respective WBS element in the new system?
Thanks
KishoreHi Kishore Ji,
For your question, simple answer is, you want to continue all AUC under Project Systems. So far, you have considered statistical internal orders, anyway, which is not possible for you to settle directly. So, please take that amount generate uploading document by using same account and using WBS element as debit and internal order as credit and status you release for internal orders.
WBS elements you create as statistical without selecting account assignment category.
Your problem will be solved.
Assign points without fail.
ALL THE BEST. -
Showing Settled Internal Orders
Hi,
In our company at the end if each month we settle our Internal Orders to a number of cost centres, so when we then run a report for that Internal Order(after settling) it shows as blank on the report....and thats fine.
Now there is a requirement to see what the costs sitting on the Internal Order were origianlly....before they were settled to cost centres, is their any report/or way to show the Internal Order before we settled it?Hi,
You can check the line items posted to Internal Order for the specific range of posting dates in transaction code KOB1. I think this report should be helpful to analyse the posting before making settlement.
Thanks
Murali.
Maybe you are looking for
-
Iphone 5s cannot call out any calls, but still can receive incoming calls and sms
Hi anyone experiencing this problem? After buying iphone 5s less than 2 months which I never did in the past, I could no longer make any phone calls out, yet i still can receive incoming calls and data. Could someone kindly assist in this?
-
Filtering extended event in sql server 2008 r2
This code has been generated in sql server 2012 (using the graphical interface). CREATE EVENT SESSION [backupsmssql] ON SERVER ADD EVENT sqlserver.sp_statement_starting( ACTION( sqlserver.client_app_name, sqlserver.client_hostname,sqlserver.nt_userna
-
How to update Ipad 4.3.5 to ios 5/6? When I connect my ipad to itunes it only offers ios 7...I DO NOT want ios 7...HELP! I have ios 7 on my iphone and I don't like it. How do I update my ipad to a lower version....5 or 6? I can't access or download m
-
Rule returns no agent and workitem sent to all users
Hi, In my workflow I have defined a rule fot a workitem. The task is general task. When this rule does not return a possible agent system is sending workitem to all the users in the system. I tried to make the task general forwarding not allowed, the
-
Creating icons in photoshop elements8
Could someone tell me how to create an icon in photoshop elements 8. I'm sure it must be possible.