Any Positive Feedback for 2.01 ??

I am just curious if there is any positive feedback for 2.01. I am hesitant to change so quickly after the release.....but on the same token I have many different Apple products which I never have issues with. I come here often and read a lot of complaining posts. Don;t get me wrong, I think a lot of them are done like an adult trying to solve a problem and not just a ***** session......but there are equally if not more posts that just whine and curse the apple brand.....
Anyway, I have been lucky enough to not face the cursed updates on any of my apple branded equipment. Most install without incident and all are functioning at least as well as I would hope. I am leery however of new updates so I thought I would see who might be having positive results from the 2.01 update.
Thanks

Hasn't fixed the podcast art disappearing randomly from the favorites.
Hasn't fixed the "scroll off to nowhere" when you have 50+ podcasts in your favorites, then delete one, then scroll down to the end and the highlight box just disappears off the left side, never to be found again.
What a disappointment. I wish I could get my money back on this one, what a waste of time.

Similar Messages

Does anyone have any positive feedback after upgrading to Mavericks?

I have a couple of computers that I bought in February 2012 (iMac, MacBook Pro) running OS 10.7.5, and I'd like to upgrade to Mavericks, but the forum shows all negative experiences with the upgrade, so I'm wondering whether I should wait to install. Thanks all.
Take care,
Brian

Thank you Michel, John, & rgilbert,
I'm neither a technophobe nor technophile--I fall somewhere in between, so I usually wait to upgrade any software until it's been out for a bit, same goes with purchasing hardware.
I work as a photographer, so I have to be able to get around a computer somewhat, and I've never had anything but Macs, which has been since 1992..
Michel, I had 16GB of RAM installed in both my iMac & MB Pro when I bought them, so I'm sitting pretty good for RAM, and I do most of my hardware business with an Apple specialist here in Madison or OWC.
And John, I automatically backup before any major installation, so no worries there.
I have no "crapware," no anti-virus--the only software that would maybe fall under this heading would be TechToolPro, and I don't think that counts.
And of course I know that in most cases folks don't say anything unless they're having a problem, but I always try to say something positive if I can with subjects like this.
I've never had an issue with any upgrades, with the exception of the iOS 7 for iPhone, and 7.0.3 pretty much cleared most of that up.
Two reasons I'm looking at doing it sooner than later: I read an article by another shooter that talked about the improvements in Mavericks for photographers, and I'd like to get familiar with it before I hit the road for a major job in two weeks.
Again, I want to thank you all for your help & time--I really appreciate it.
Take care,
Brian

Positive Feedback for Technical Support

Recently had a great experience with Fios technical support. The person who helped me gave an email address to provide feedback, but the email bounced. Could the powers that be please let me know what address I can send my comments? He really deserves this positive info in his file.
Thanks

Hello frumple
Please private message the forum admin and he will be glad to help you out.

Seller is bargaining for positive feedback on item sold

I purchased a screen protector for a 3DS for $1.29 with shipping. The item came in a sealed package. One of the screens is larger then it should be, so I rechecked the listing and it clearly showed the protector fitting the inside edge of the screen. So I then emailed the seller, and asked him what he would suggest as a solution. He then offered me a 30% refund. My response was "Sure! for a neutral feedback and three stars!" He then asked if he gave me a refund, or sent me a replacement, would I give him a positive review? It is only $1.29, I mean when I ordered it, I thought no big deal if it's not what I expected. But I'm not giving a positive feedback for an item that was not as described. Do I let it go, and not post any feedback. Or accept the refund/replacement and post a positive feedback....when I don't think it was positive. I have a hard time lying...even if it just withholding the truth. OR....am I making too much of the situation? This seller had 14 Neutral, and 12 Negative feedback in the past month. Their positive feedback is 98.2Thanks....PS I could not figure out how to delete the spoiler box....that's why it's there

So I then emailed the seller, and asked him what he would suggest as a solution. He then offered me a 30% refund. My response was "Sure! for a neutral feedback and three stars!" He then asked if he gave me a refund, or sent me a replacement, would I give him a positive review? Although I don't think that feedback should have been mentioned at all, I'm not sure if ebay would rule that the buyer was using feedback extortion if the conversation happened as reported. The buyer was responding to the sellers offer of a partial refund, they weren't specifically attempting to force the seller to provide: Goods or services that weren't included in the original item's description or purchase price.A return, refund, or replacement item. If the buyer said they wanted a full refund or a replacement without returning an item then that would definitely be feedback extortion. The seller did break the feedback extortion policy when they asked the buyer if they would give a positive review for a replacement or refund. The seller can't require a buyer to leave positive Feedback, specific detailed seller ratings, or revise existing Feedback in exchange for a number of things, including, but not limited to:Receiving the purchased itemIssuing a full or partial refundMonetary compensationAdditional itemsOther goods and services not included in the original listing

Where do I leave feedback for technical services received?

Need to know the location on the website to leave feedback for technical services received.

Hello Brian, We recently had a not-so-positive and then a positive experience with technical customer service. Out of the blue, we received messages that my daughter was at 75% of her data usage. She has 2 GB and has had that for 2 years without ever, ever going over. First call got us to Brian, who was very rude and simply said that Verizon is never responsible for the charges on a cell phone – it is always the customer’s fault. So, I asked for a Supervisor, which got me Thomas. Unfortunately Thomas had no clue and tried to tell that the charges were due to the update ESO8. Our phone had ESO7 and we didn’t update. He again was not helpful as he basically didn’t understand or want to. Then we got Annabell at Apple. She was very nice and talked me through the issue and possible problems with using that much data in basically 8 days. She then called Holly at Verizon who actually looked at the schedule of data usage and determined it to be downloads on specific days at specific times. Times like 16:48:57 to 17:48:57 – no one has conversations or uses data like that, but a download will. And downloads, of course, didn’t happen on wi-fi. Holly was wonderful. Helped us clean up the phone as we couldn’t tell exactly what was downloaded. Floated us 3 more GB of data until 10/8 when we go back to 2 GB. Jeff and Thomas should never be allowed to talk to your customers again. I was on the phone 2 full hours. If I felt I had a choice I would drop Verizon in a heartbeat. Shame on them. That’s it. Let me know if you’d like any additional information. Thank you for your consideration. Peggy

Tuning a servo while encoder gives negative position feedback

I want to tune my servo motor (voice coil) manually in MAX. Stable step response is possible, but two problems occure:
1) When the step is done, the curve displayed on the "Calibration>Servo tune>Step response" tab shows an excitation step line from -70000 to the value I entered under "step length", although I reset the current position in the "1-D interactive" to zero beforehand.
2) No matter how I change the "step length" value or Ki, the motor step always goes from this above mentioned -70000 to +50000.
To facilitate any hint, mazbe this causes the problems: My encoder head is mounted the way that it gives back negative count values in the positive motor direction. Does this have to be changed or is it possible to also tune the servo with this negative encoder position feedback. Is it even possible the position feedback from - to + within MAX?
Thanks in advance for any help.

Customer solved the problem:
"Sehr geehrter Herr Wagner,
bzgl meiner Anfrage für die Regelung meines "Vertikal-Servos" habe ich
meine Probleme lösen können:
- Das Vorzeichen der Encoder-Counts konnte ich durch vertauschen der
Encoder-A-B-Polaritäts-Kabel am Encodereingang des Motor Drives umdrehen.
- Wie erwartet war es dann (wenn auch nur mit viel Geduld) möglich,
PID-Einstellungen zu finden, die meine Achse auch mit dem aufliegenden
Gewicht vertikal kontrollieren lassen.
Ihnen nochmals vielen Dank für Ihre Unterstützung.... Die nächsten
Probleme kommen für mich bestimmt.
Freundliche Grüsse,
Henri Hagenmüller"

[Ask & Note] Feedback for BlackBerry 10

Hi,
I have some feedback for blackberry team but I don't know where to post it..
So I'll just post it here and please let me know if this room is not the place for my post.. Thanks..
I'm now using BB10 (Q10) and have some feedback for blackberry, so I hope this feedback can be used to improve BB10 features and also increase the easy to use and popularity of BB10
Here is the list:
1. Auto suggestion for email address (To/CC/BCC). Here I'd experienced that this features is useful and also very much annoying, why? because the list is come from the recent email address that we use to send and also from email address that have send email to us including the SPAM email (if coming to our BB Inbox), my suggestion is to make some feature/menu for user to have option for clean-up the list of email suggestion or user can delete some email in the list if they feel that email is not necessary to be there (like we will never send email to DoNotReply email from some company/domain).
2. Recent Updates in BBM. I'm one of some users that not using 'Recent Updates' feature in BBM, and this feature is one of the reason why my BB battery drain so fast.. Correct there is option to turn off the 'Recent Updates' but the way is so much not user friendly, I must tap and hold each and every one in my contact list updates and hide their updates from my BBM, why not just put one option in setting for turn off ALL Updates (like u have in old BBM)? I think it will be more acceptable in this world compared to hide one by one (imagine if you have more than 1000 contacts in your BBM) and you must do it every time you do complete clean firmware upgrade.
3. Mobile Network vs Wifi. I don't know this is just happen in my BB or other's too. My experience is, if I was connected to a wifi network and turned off my wifi, the connection supposed to be from Mobile Network, but what happened in my device is, the connection just shown E / 3G without BB logo (means no connection to Blackberry Service), it's happen until I manually turn off the Mobile Network and turn it on again or change my Network from 2G to 3G only vice versa. Please do check about this problem.
so far that's the feedbacks from me, please let me know if there is some mistake in my post..
Thanks a lot..
I hope Blackberry will grown up again and more bigger than before..
Best Regards and Thanks,
Hartawan

There is no link to suggest anything to BlackBerry but if any of the BlackBerry employees who browse these forums are going to look anywhere then it will be here...
http://supportforums.blackberry.com/t5/BlackBerry-10-Smartphone/Feature-Requests-for-BlackBerry10-OS...
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

TPM_MIGRATION No position exists for the selected criteria Msg no. TRQ0020

Hello Experts.
I'm facing a error when execute the STEP B06 in TPM_MIGRATION Transaction, the message was:
No position exists for the selected criteria
Message no. TRQ0020
Diagnosis
This is the position that is characterized by the following details:
CC=1020;PT=V4I;SA=DEPBCCR;SE=1000013
When I look the Security ID number in the old system, the Document is obsolete, but the migration transaction seek the FLOW information for this ID number and not return any information.
Thanks for you help.
Regards.
Edited by: k3n_rao on Mar 31, 2011 7:32 PM

Hi Lorenz,
Thank you very much for the answer, My colleague, the one who posted the threat is not longer available, he went on hollydays.
We did check TPM12 & TPM13 and the reports said:
TPM12 : "no positions selected"
TPM13: "No flows found"
Just to double check that we have understood, which "Migration date" are you reffering to?
thank you very much
best regards,

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

How can I get the position stream for a composition?

I am writing an AEGP plugin for AfterFx and I need to get the position stream for a composition. I have based my plugin on ProjDumper.
Can anyone help?

Hi Shachar,
Many thanks, that goes some way to explain it.
However I am creating a composition adding text layers to it and animating the positions of the individual text layers. Then I create a second composition and include the first as a nested composition and I animate the position of the first composition within the second composition.
When I run my plugin I only see the animations I added to the individual text layers, they are not combined with the overall animation attached to the first compisition within the second composition. The animation data for the first composition must be stored somewhere. Do you know where ?
I have been looking at source items and markers neither seem to provide the information I am interested in. Any clues would be very helpful.
Thanks in advance.

Can AME used in combination with position heirarchy for purchase requisitions ?

Hello,
We are using position heirarchy for purchase requisitions.
Can we use Approval Management engine in combination with the existing position heirarchy for purchase requisitions for more flexible workflow routing ?
regards,
Natalia

Hi Natalia,
Have your inquiry been addressed? Please let me know if you need any further assistance in this, otherwise, Please mark the answer as Correct/Helpful in order to leverage the discussion and facilitate correct answer to other members who may confront the same concern of yours.
Note: Liking the answer will not mark it as Correct/Helpful, you have to open the discussion first to be able to mark it (This is not possible by opening the discussion from your inbox)
Thanks,

Help!!! - When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."

When Creating Customer I get this ERROR "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively."
I tried troubleshooting when I saw the another post and created with a new customer profile class, but still getting an error, though I created another profile like below and attached this to another existing customer it worked, but when I tried creating a new customer it is still giving me the error. I am Using Oracle Applications R12.1.1
Steps I followed in Creating a New customer Profile
==== Make sure the new Customer Profile class which you will create is in active state. Cross check below steps while defining a customer Profile class.. e.g. Name : DEFAULT (and it's active)
*1) Profile Class Tab :*
a) Balance FWD Billing : Not enabled
b) Invoicing --> Tax Printing ( Summarize By Tax Name), Grouping Rule (DEFAULT)
c) Set Terms as per ur requirement , do allow discount & Override terms
d) Set Dunning as per your requirement,
e) Filled in Collectors info as per your requirement with Credit Check enabled...
f) Receipt --> Auto cash Rule set as 'Standard'..
*2) Late Charge Profile* Set it as per requirement
*3) Profile Class Amounts* e.g Say Currency set as "USD"
a) Credit Limit : 100000
b) Order Credit Limit : 100000
c) Minimum Receipt Amount : 1.00
d) Min statement amount : 1.00
e) don't put any value in Exchange Rate type (e.g, monthly, Plan etc..)
f) Minimum Customer Balance : Amount ------> Value: 5.00
g) Minimum Invoice Balance : Amount ------> Value: 5.00
h) Minimum Charge per invoice : 1, Maximum Charge per Invoice : 100 Under Interest Charge
i) mention Type as Fixed Rate, Value : 10
j) You can avoid setting the Penalty Charge for the time being..
Step-2_ a) Open a customer ..*go to Bill to site details* --> Click on Profile Tab --> Under Profile Class field please include new profile class which is created by you (e.g DEFAULT) . b) Go to Profile Amounts Tab --> Click(Show) on Currency USD --> Verify the set up here as well I could see this.
When I tried creating an new Customer using the new profile, it's repeating the same error. Please help.

Hi
You get this error when profile class amounts are not set for all the currency. Go back to your profile and ensure that the profile amounts are set for all the currencies found, whether you are using it or not.
Regards

Where Can we Download the "old" speedgrade ... so we can give better feedback for integration?

Where can we download the "old" speedgrade, so we can give better feedback for integration with aftereffects and premiere. I haven't used speedgrade, but I'm assuming it's like Davinci Resolve ... color grading is something you have to play around with a bit, to give decent feedback on integration. On one extreme, I like the ease of aftereffect composites. On the other hand, using graph operators (such as in Resolve and things like blender) ... is real nice ... but it's really not how i do work on the adobe side. I'm looking for a color grading approach that isn't for tier 1 film, but more for tier 2, independant and/or corporate work. I'd also love the ability to mix special effect compositing (like I currently do with AE), with coloring (which I currently have to do in in another program). I also have two work streams I would like to test, one RED and another 1080p for normal corporate stuff (which i currently don't color grade btw).
Anyway, I see some wierd links on downloading the old speedgrade, I don't see any download links on the speedgrade web page ... would be nice to see what the old speed grade does so I can comment competently.

Adobe SpeedGrade CS6 is at the door, official preview will be held at NAB, I'm currently testing a preview version of SG CS6 and I want to say that it works very well, so stay tuned on the Adobe website.
I tried to "stay tuned", here on this Adobe Website ...and your post is the first confirmation that Adobe Speedgrade still has any sign of a beating heart.
Totally dissapointed in Adobe for lack of SG communication to keep my interest up.
Regardless of that, I am looking forward to seeing it.
EDIT:
Speedgrade In CS6...brilliant to see it is now "a reality" ...and so excited and looking forward to checking it out.

I want to block a number from calling and message me but how do i do this is there any app avalible for this

I want to block a number from calling and message me but how do i do this is there any app avalible for this

Sadly, as Call Bliss uses the built in Do Not Disturb feature, it requires that your screen be locked in order to function.
I'm hoping (and have submitted feedback) that Apple will beef up DND to work even when the screen isn't locked.

I want to communicate with J1850 system. Is there any hardware available for this?

I would like to communicate with a J1850 system. I am wondering whether there is any hardware available for this similar to CAN. Is there a possibility to find exampls for this kind of communication.

On Fri, 16 Jul 2004 14:02:48 -0500, Mudda wrote:
> I would like to communicate with a J1850 system. I am wondering whether
> there is any hardware available for this similar to CAN. Is there a
> possibility to find exampls for this kind of communication.
I'm still new in this area but I will try to help. AFAIK, J1850 comes in
two flavors: VPW and PWM. You can purchase an adapter that converts RS232
signals to those required by J1850 for about $100.
I suggest using an adapter from Scantool.net. I say this because I
have one and it's very easy to use. It's flexible enough to use with a
terminal (hyperterminal, minicom, etc.) or to interface with LabVIEW, as I
have done for you already. Go to OpenG.org for the download:
http://openg.org/tiki/tiki-index.
php?page=On+Board+Diagnostic+-+OBDII
Let me know if it works for you. The interface is a little weak but the
VIs should clue you in on how to handle communications. I plan to add
another update in a few days so check the site regularly. I would
appreciate your feedback.
-kevin

Any Positive Feedback for 2.01 ??

Similar Messages

Maybe you are looking for