APEX Bugs: Editing customer contacts and uploading attachments

I'm using the pre-packaged application, "customer tracker"
Application Version 2.2.35
Build Version 4, Application Express 4.2.3
I am using it on a MAC
And am having some issues with the pre-packaged application "customer tracker". I uploaded a bunch of data. However, now when I try to edit a contact record, I get the following error:
1 error has occurred unable to extend table application_name.EBA_CUST_History by 8 in tablespace APEX_5956688132079418188.
It doesn't matter if I'm using Firefox or Safari.
The only way I can modify customer records is to completely delete them and then manually add each one back in -- which is not very scalable. I was able to edit records previously. This just started yesterday.
Is this a known issue? Any way to fix?
I end up getting the same type of issue when I try to manually add an attachment It doesn't matter if I'm adding a word doc or a PDF, same error. This error started after I manually uploaded a handful of attachments last week. The error reads as follows:
Unable to extend lob segment application_name.sys_LOB0006066941C00008$$ by 128 in tablespace APEX_5956688132079418188.
Could someone please assist?
Thanks!

Not an APEX issue, your database tablespace needs cleaning up/expanding...
Thank you,
Tony Miller
LuvMuffin Software

Similar Messages

After updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

after updates to ios 5.1.1...i can't add or edit my contacts and also can't take a photo at my contact lists. The '+' icon is suddenly disappear from my screen...anybody can assist me on this issue?

At last, the BEST solution!
In addition to my last post, here is the solution for fixing this problem without syncing your contacts with icloud.
It takes about 2 minutes and permanently solves the problem so you can start adding and editing your contacts again on IOS 5.1.1!
Basically you just need to follow these steps from the Settings page:
Enable Airplane Mode
Go to iCloud settings
Turn on Contacts
Agree to 'Merge Contact'
Wait for pop up to confim iCloud contacts are on
Turn off Contacts
Confirm that you want to Keep your Contact on the iPhone
Wait for pop up to confim iCloud contacts are off
Disable Airplane Mode
Airplane Mode temporarily blocks all phone signal/data to stop your contacts merging with icloud.
Thanks to Washyman and Drewie77 for that info above! I got it from this post and it worked fine.

Customer contact and business activity

Hi,
I have a requirement , When we create a Business activity in CRM that should should create and maintain in ISU( R3) as Customer contact with the same number range ..
Like wise if I create a customer contact in ISU that should create in CRM as Business contact with same number range..
Please suggest me what all the customizations required for this ?
Thanks & Regards,
Rahul D

Hi Shaughterdm,
Welcome to Numbers discussions.
When spreadsheets first appeared, I'm going back to the original Lotus 123, they were used by many folks and organizations as flat file databases so the short answer is yes you could do it.
After reading your request a better answer would be to look at a relational database such as File Maker Pro and their new Beneto perhaps. Of course it depends on your needs, type of data recorded etc. Based on your reporting desires personally I'd lean towards database not a spreadsheet.
Do evaluate your needs, what you want out of your data now and down the road. I wouldn't want to start with a spreadsheet then realize months, years later it should have been in a database—been there done that got that tee shirt and scars. I've worked with many that this happened to. UGH!
I'm sure others will jump in here with other more helpful suggestions.
Sincerely,
RicD

My iPhone 5 freezes EVERY time I try to open a contact or add/edit a contact and freezes up pretty much on everything I do.

My iPhone 5 operates at about the speed of dial-up internet. Every time I try to do something I have to wait. My harddrive is not even close to being full and I always close out of my programs so I am confused. It is mainly a problem with contacts (adding, editing, viewing, anything). I also occasionally hardware reset (power and home button same time) to try and help but to no avail. Is this an Apple issue that a trip to the Apple Store will take care of? I am just sick and tired of having upgraded to an iphone 5 only to step backwards in speed and performance, plus switching over deleted over half of my contacts even though I had icloud set up on my 4 and also on my 5 so it should have been seamless. Is my phone a lemon?

If you have force quit all applications, performed a hard reset, software is at 6.1.4, then the device needs to be restored as new. I recommend to sync, transfer, and import all data to your computer and restore as new at this point. It is the same steps the Apple Store is going to do, its a software issue, not a hardware issue right now.
iOS: Importing personal photos and videos from iOS devices to your ...
Transferring purchases from your iOS device or ... - Support - Apple
Push your contacts, bookmarks, and calendars to iCloud by signing into your Apple ID in Settings > iCloud and make sure they got there by going to icloud.com
iTunes: Restoring iOS software - Support - Apple

Edit Customer Problem and Logical Port

Hi Experts,
ISSUE 1
In Web Service Administration, when I look at /iwcnt/actionitemvi_document service in details, I can see one Endpoint only, that is Binding_T_HTTP_A_HTTP.
In the Troubleshooting Guide, in section 5. No Workflow / Reports reach the SCL from backend system, there are mentioned two endpoints: Binding_T_HTTPS_A_HTTP and Binding_T_HTTP_A_HTTP - all other setting, I have, are the same on my server as mentioned in the troubleshooting guide. So why there is diffrence in binding on that particular service?
The other thing I noticed, is, that when looking closer on the logical port creation on backend system in the Behind the scene video, it mentions, that the Path Suffix include binding_t_http_a_http whereas in the Troubleshooting Guide it is showing binding_t_https_a_http - why this?
What is the right path suffix for the logical ports at the backend system?
ISSUE 2
When we edit a customer from SharePoint, we get the following error:
Error
An unexpedted error has occured
Correlation ID: ea04d908.xxxxxxxxxxxxxx
Looking closer at the correlation at SCL, everything seems to be green and no error is reported, but in the ULS Viewer, following info are displayed:
Microsoft.BusinessData.Runtime.BackendNullReturnException: LobSystem (External System) returned a null structure which is incompatible with the associated metadata.
at Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.WrapAsEntities(IMethodInstance methodInstance, IEntity thisEntity, IParameter parameter, ITypeDescriptor entityInstanceRootTypeDescriptor, Object correspondingAdapterObject, IEntity targetEntity, ISystemUtility dataSystemUtility, ILobSystemInstance lobSystemInstance)
at Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.ExecuteInternal(IDataClass thisDataClass, ILobSystemInstance lobSystemInstance, ILobSystem lobSystem, IMethodInstance methodInstanceToExecute, IMethod methodToExecute, IParameterCollection nonReturnParameters, Object[]& overrideArgs, IFilterCollection filters)
at Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.FindSpecific(IEntity thisEntity, Identity entityInstanceIdentity, String specificFinderName, ILobSystemInstance lobSystemInstance)
regards
Tariq

Hi,
ISSUE 1:
This is very likely because SSL is not configured. First of all can you go to SOAMANAGER -> Business Scenario Configuration and deactivate and activate the DUET_ENTERPRISE_ALL. When activating check if you are getting errors for the Assertion profiles (my guess would be, that you are getting errors).
In this case check the SSL configuration from SMICM -> \[Menu] Goto -> Services
Here you should see an active service HTTPS. If that is not the case, check that the SSL certificate is created (STRUST) and make sure that the required profile parameters are set (see also Deployment Guide -> "To configure the use of SSL in the SCL host" on page 33 at http://www.service.sap.com/instguides -> Duet -> Duet Enterprise 1.0 -> Duet Enterprise SAP Deployment Guide)).
Regarding the backend configuration for the logical ports in LPCONFIG. Here it depends on how you have setup the configuration on the SCL. If you released the services with HTTPS then the URL in the backend has to be HTTPS binding, if you configured it via HTTP, then it has to be HTTP binding Did you perform the connection tests as described in the videos or in the checkpoint of the troubleshooting guide?
ISSUE 2:
Can you take a look also on the SAP side in SRTUTIL? Do you see any additional error information there? You might also want to check the errors from the log viewer /IWFND/VIEW_LOG
Regards,
Holger.

APEX-BUG? Row Highlighting and Mouseover

Hello Experts,
I build a classic report on APEX 4.0.2 with different column templates depending on the dep_id-row. (If dep=30 I want a green row)
You can see this at [http://apex.oracle.com/pls/apex/f?p=12579:5:164720075315678:::::|http://apex.oracle.com/pls/apex/f?p=12579:5:164720075315678:::::]
After F5 all columns for dep 30 are in green. If you move the mouse over the report the rows become grey. After next F5 you will again see the green background color.
The template is defined as follows:
Column Template 1
<td headers="#COLUMN_HEADER_NAME#" #ALIGNMENT# class="t20data" style="background-color:#EEEEEE;">#COLUMN_VALUE#</td>
Column Template 1 Condition
Used Based on PL/SQL Expression
Column Template 1 Expression
#DEPARTMENT_ID# <> 30
Column Template 2
<td headers="#COLUMN_HEADER_NAME#" #ALIGNMENT# class="t20data" style="background-color:#8FE98F;">#COLUMN_VALUE#</td>
Column Template 2 Condition
Used Based on PL/SQL Expression
Column Template 2 Expression
#DEPARTMENT_ID# <> 30#DEPARTMENT_ID# = 30
I'm shure that this already worked fine.
Is there a way to use Row Highlighting together with Column Templates ?
Thanks for any idea!
Frank
Edited by: frank_schmidt on 23.02.2011 02:01
Edited by: frank_schmidt on 23.02.2011 07:41

I can see that when the mouse moves over a row, the row cell(td) are applied a background-color, this is not via a class but it is set directly at the column level.
So I guess it is some JS code that does it.
If that be the case, irrespective of the css classes or inline styles you specify for the column,they would be overridden(element.style > class ) and overwritten(td.backgroundcolor is set directly). So JS code that does this has to be disabled first.
If you remove the 'highlight-row" class from the table row( tr) element either in the template or if its for just one report, do it directly in the Page using JS by
$('tr.highlight-row').removeClass('highlight-row');Now inorder to get the row highlighting(without removing the original styling on mouseout), change the template to use a class and move the background color under the class( background-color:#8FE98F).
If you highlighting to work with FF alone, you can define the :hover pseudo class
{code}
tr.highlight-row td:hover{
background-color:#CDCDCD;--use the mouse over color
{code}
But if it has to work with all browsers, you would have to rewrite the row highlighting JS

Just bought a new Canon Vixia HF R300. It looks like I have basically two recording modes--either AVCHD or MP4. I have a year old Mac Mini on Lion with increased ram. I edit on iMovie and upload to You Tube. Which recording mode would be best?

Hi...
I just bought a Canon Vixia HF R300 camcorder. It looks like it gives me a choice of two recording modes AVCHD or MP4. I will be uploading onto a year old Mac Mini with the Lion Operating system and increased ram. I will be editing in iMovie '11 then uploading to You Tube. Which recording mode should I use? Obviously I'd like to get the best quality but I also want it to show well on You Tube. What do you think? Thanks for the help. Bill

Hi
What program can you use to convert AVCHD to a DVD format?
Share to File (in iMovie) - AND AS 480p - NOT Higher as DownScaling will be done badly.
Use this file in iDVD or Roxio Toast™ or what DVD Authoring program You've got.
To make a VIDEO-DVD You must use a DVD Authoring program - to get the right compression format AND Structure - It is a MUST.
There are free alternatives - but resulting DVD hasve been far from what quality iDVD (and Toast™) will deliver.
To get best possibly DVD - also this counts.
- DVD brand used - I only Verbatim
- DVD type used - I only DVD-R Single layer (4.7Gb)
(DVD+R works for many and DVD-R/W usually don't work OK and Double Layer also are a problem to it self)
- BURN SPEED - I set this as low possibly (usually x2)
- Free Space on Start-Up Hard Disk - MATTERS - I never go less than 25Gb
Good Luck
Yours Bengt W

Photos not retaining edits after exporting and uploading to Pinterest. Why?

After I export my edited photos from Lightroom the edits will not show up on the photos when uploaded to certain websites...ie Pinterest, NatGeo photo sites. My photos look horrific,colors are muted and gross. What's wrong??? They look fine on my laptop photo viewer and they look great in Lightroom. They look fine on my wordpress blog too. So frustrating.

wellslynch
Welcome to the Apple Discussions.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Editing In Lightroom and Uploading with Picasa?

I have about 10 years of photos organized with Picasa, but I recently bought a D90 moved over to RAW capture and processing. I just got Lightroom, and so far I love it. However, if I do cropping or exposure stuff in Lightroom, and then open the folder in Picasa for uploading, I only see the original, unprocessed images. Is there anyway to make Picasa "see" the edits from Lightroom?
I know there's a plugin for Lightroom to upload to Picasa Online directly, but for now I'd like to keep the ability to at least view and organize photos with Picasa.
Thanks!
John Huntington

Thanks for the response.
Picasa actually works just fine with both DNG and Nikon Raw files, and when you upload from Picasa, it just automatically creates JPG's. It's very convenient, but I prefer the editing tools in Lightroom.
The only solution I see now is to do as you say, but then I end up with two sets of photos which is a pain.
John

Display and Upload attachments to Opportunities

Hi,
We are building an external Application for the CRM in WebDynpro for Java.
1. We need to attache (upload) documents to opportunities
2. We need to display attachments of opportunities
These two actions should be performed using RFCs because this is an external application.
I will appreciate your advice.
Thanks,
Aviad

Hello Aviad,
I think my Blog on <a href="/people/gregor.wolf3/blog/2005/10/02/inbound-mail-processing-150-attach-files-to-opportunity">CRM: Inbound mail processing Attach files to Opportunity</a> could be a good starting point.
Regards
Gregor

Edit Contact and/or Item in an open call.

Is there a way to edit the contact and/or item a call is logged against? Both for manually entered calls and for Calls opened via email.
LiveTime docs certainly seem to suggest that a call opened via email using the 'Unknown' item can be edited to assign a specific item, but I appear to be unable to this.
Thanks
Osh..

Sector,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

FSCM Collections - Customer Contact Result in the Worklist

Hi Experts,
I have implemented FSCM Collections at my client and they have a question regarding the customer contact result in the worklist.
Indeed when one creates a customer contact and generates the worklist again (via transaction UDM_GEN_WL), it seems that the customer contact Results (code & name) disappear (regardless of the result type or settings in customizing).
Do you know how we can prevent these data from being removed from the worklist during the worklist generation ?
Thank you for your answer !

To all who that might interest: I adressed my questions to a SAP consultant and his answer was the following:
> Regarding question 1: when the worklist is generated, why is the Last Contact Date not updated ?
This is controlled by customizing and whether field u2018reachedu2019 is flagged or not in the u2018result codeu2019 settings. If it is flagged, the last contact time and date is updated when the work list is created.
> Regarding question 2: when the worklist is generated, why is the Last Contact Result not updated ?
This is the standard system behaviour and here is an explanation on why that is.
Once you run UDM_GENWL, the customer contact result is set to blank. SAP Development rationale is the following.
During the day, an specialist opens his/her worklist and successfully contacts the customer. The specialist chooses the result u2018customer reachedu2019 and the work item goes to the completed item list. Now the supervisor runs UDM_GENWL during the night and a new worklist is created. The next day, the specialist accesses his/her worklist. If the result of the customer contact is not reset and still has a value u2018customer reachedu2019, the specialist may get confused and not know whether to contact the customer today or not. That is the reason why it was decided to reset the field result of customer contact when the worklist is created.
I guess we can argue on whether it is the right design or not, but it is the standard system behaviour. Having said that, it is possible to add customer specific fields on the work list screen using BAdI UDM_WL_ITEM_DISP_C. This could be used in order to populate a custom field with the u2018customer contact resultu2019. Using FM UDM_CCT_LAST_GET you can get the last customer contact and you can use FM UDM_CCT_RESULT_PROPERTY_GET to get the description of the result code. This is rather easily done but requires some development.

Customer Contact

Hi,
I am working on FSCM 6.4 Collection Management, while i tried to create customer contact and tried to get the contact information from get contact person from the process receivables it is showing blank, i can create it manually but by any means if i could see the contact information as it is available in FI-AR in general data, it is replicated from CRM business partner to FI. Please help me with standard procedure people adopt for the customer contact information in business partner collection management or credit management.
Regards,
Sai

Guru,
Also sent you another message and you are omnipresent in Collections (at least - as I am searching that only).
I am not able to sync ECC-Customer/Contact Person as FSCM-BP/Contact Perso.
And Contact Person doesn't appear in worklist.
Customer created/changed (with a Contact Person) is synced, but, fails when there is a Contact Person.
Seek you kind help.
Thanks,

FSCM Worklist - Customer Contact Error

FSCM Worklist - Customer Contact Error
When entering the Customer Contact and trying to save - getting Error
Function Call failed; Could not find UDM_GOS_ATTCH_COMMIT
Basis recently activated
FIN_FSCM_CCD_INTEGRATION
FIN_FSCM_CCD_INTEGRATION_3
but not:
FIN_FSCM_INTEGRATION
Would this be the problem?
Please advise
Thanks
Trevor

Hi trevor did you get a solution for this error? If you did please share.
Thanks,
Rick

Edit in contacts gone

I have just updated my husbands iPhone 4 to iOS 5.0.1 and now have lost the edit in contacts and unable to add a new contact. Can anyone help?

YOu have to go to Settings, Icloud, and turn on contacts.
That is how I resolved it after reading other forums.

APEX Bugs: Editing customer contacts and uploading attachments

Similar Messages

Maybe you are looking for