Apparently 4.3.3 broke my exchange password authentication and is locking my work computer. Can I restore previos IOS?
Any help will be appreciated. I upgraded to 4.3.3 and it apparently broke the password authentication for my work exchange account. I can't get my iCal on my desktop after Lion and now this. Grrr. It continues to hit the server and locks me out so I can't get email from any computer. Does anyone have a fix? If not can I restore the previous version? It was working perfect.
Thanks in advance.
As far as I know, it is not possible to downgrade to a previous iOS. Apple doesn't support it.
Similar Messages
-
i am trying to restore my iphone but it is asking me for a password. i have tried my apple ID password and several others but nothing is working. how can i restore my iphone? is there anything i can do?
recovery mode
open itunes on computer
plug cable into computer not phone
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808
if it says turn find my device off can be done at icloud.com or on the device settings - icloud - find my device -
I probably misclicked when I activated the security lock on the iPhone and now I can not figure out what password I entered. Moreover, I have patches and funky looking phone so I can not restore iphine pres itunes. Please advice.
Your only recourse is to force it into DFU mode:
Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings. -
I have a huge problem! I've forgot my Ipod touch password, so I tried it a few times! Now my Ipod is disabled. So I affiliated the ipod to itunes but it doesn't work, I can't restore it! So what should I do?
Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My iPad was stolen. It is password protected and I locked it. So far no one has tried to turn it on. I would like to erase the content but am afraid that the "Find it' software would be diabled too. Can someone tell me if this is what happens?
If content is erased, then the ipad will no longer have the Find My iPhone service turned on, hence can't be tracked. But the thief will not be able to view your data/apps. But thieves these days know about the service and can reset the device so that it is no longer tracked, although all data is erased anyway. They don't care about getting at your data, only about keeping the device to sell or use it as their own.
-
I cannot get on my email exchange using firefox, and it has been working until today.
My company uses a owa.postoffice.net exchange, and we are supposed to use internet explorer, or firefox. I have a Mac, so I use firefox, and it has been working fine for the past 90 days, and today, I go to the exchange, type in my password and user name, and I am then sent to just a blank page. I talked to two other Mac user's today within my company and he is not having any trouble at all, so that tells me that is my firefox that is having these problems. I would like someone to call me about this @ 919-669-4909. I do not want to talk over email.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox > Preferences > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/Cannot+log+in+to+websites -
Ihave synced my IPAD to my IMAC and the password on my IPAD no longer works. Can anybody help?
I synced my IPAD 2 to my IMAC and my password on my IPAD no longer works. My IPAD is disabled for longer and longer after each password I try. I have tried my IMAC password and also my APple ID password. Can anybody help?
If you can't remember the passcode that you set on it (which won't be the same as your iTunes or Mac passwords unless you set it the same), then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
-
I keep getting asked for my Mail password when I want to send or receive mail in Mail. I do not know what this password is as I thought it was my Apple ID password, but this fails. I have changed that password so many times recently as I thought they were linked (why aren't they?). How do I change my Mail password without having my old one? Are there some security questions I can answer to do this? Heeeeelp please.
Your iCloud password is your Apple ID and password. You must know it since you are posting here.
Have you transfered your MMe account to iCloud? If not, open iCloud in system preferences and sign in with your Apple ID and password.
If you have transfered it to iCloud, do this:
Go to the iCloud icon in System Preferences and open it. Sign out of iCloud.
Open Mail. If the iCloud or MMe account still exists in Mail's preferences under accounts, select the account and delete it. Then sign back into iCloud and choose Mail and any other applications in iCloud that you use. The Mail account should be put into Mail automatically.
Signing out of iCloud should remove the account from Mail and signing back in should put it back. There is no manuel account creation by you when using Apple Mail application. -
my username does not allow me to start my mac book air. what can i do
Reset your user password. If you are using Lion, hold down the option key when you hear the starting "bong". then select the recovery disk. Then follow the instructions as alid out in the second arrow bullet on this document.
-
I had iTunes9 in my Win/Vista/serv pack 2 and it was malfunctioning badly. Would not grant me access at all. I've got new password etc. but can't download 10.4.1 (64 bit) on my new ASUS laptop. It has 500GB of RAM, intel Pentium core 13 processor, Windows7/serv pack 1 plus fat a$$ graphics & sound but everytime I try to download iTunes, it tells me my computer hasn't been "modified"? Please HELP! What sort of modification do I need to do? I am a complete computer moron but I have to have my music. If you know how I can fix this will you help me in dummy speak please? TY to whoever ~ Phyllis
It may be a corrupt / damaged download.
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases > http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service > Apple Support iTunes Store Contact Us -
I recently updated my iPad mini to ios 7, which made me put a password for my lock screen. Now, it won't accept my password, and I'm unable to restore using iTunes because it says I must turn off Find My iPhone feature. However, I can't turn off this feature if I can't unlock my iPad. Please, someone tell me how to reset this or bypass the lock screen on an iPad. Thanks!
This thread answers your question: https://discussions.apple.com/thread/5328914
-
How can i unlock my phone as it will not recognise my password. Everytime i try and connect to I tunes it tells me that it is waiting for my iphone to respond!
Hey Kaz Roe,
Thanks for the question. Are you referring to the passcode lock on your iPhone? If so, the following resource should assist you:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M. -
Broke out of the box and itune update not working
Just got apple tv delivered today but it wasn't working out of the box... flashing white light..
So i connected it to itunes via micro usb and itunes won't restore it looks like the .dmg is missing..
This is really bad, surely apple have noticed the software update is missing???
Did this update work for anyone?It's impossible to know how much work there is putting it back, it sounds simple but it might not be, it's been down a few days now, I suppose it depends on how much inconvenience it is to return it for another.
-
I'm required to change my exchange email password every 3 months on my work computer. Now I can't get past the incorrect email error on my iPad. It won't accept my new or old exchange password and won't let me get past the error to do anything else on my iPad. Hitting cancel doesn't help, the error just comes back a second later, so my iPad is useless for anything else and I can't get to Settings to either enter the new password for the account or delete and re-enter the account. Is there some kind of soft reset I can do? Any other suggestions?
I saw some other posts on the web and completely powered off of the iPad. Then turned it on again and was able to quickly go to Settings and update the password. So this is no longer an issue for me. Just a pain that this is what I'll have to do every three months when I have to change my exchange password again.
-
How do you reset the exchange password?
If this is a work email account, most likely your using an Active Directory Account that is associated with your mail account. Try logging onto a PC and changing your password on your account. It is likely tied in to your mail password. Otherwise, the simple (and unhelpful) answer is login to your exchange server and change your accounts password.
Maybe you are looking for
-
Best wmv to mov video converter
Hi all, I'm really new to mac and have been looking for a video converter for my WMV files. I want to use them in iMovie but the only way to do that is to convert the file types. What would be the best converter out there? Will I loose any quality wh
-
PXEover IPV4 have new hard drive and still doing it
Help I have the HP all in one pavilion 23, It s tarted having problems and I received the PXE over IPv4 message. THe computer was under warranty so HP sent someone out to install anew hard drive. WIthin a month I started getting the same message,
-
What is the difference between C (Check) and U (Unmaintained)? Background: When defining authorizations using Profile Generator, the table USOBX_C defines which authorization checks should occur within a transaction and which authorization checks sho
-
Why can i not redeem my code to get my serial number?
I have a redemption code. I cant put it anywhere to redeem and get my serial number. been at this for hours. I signed up for Adobe Online and then was never prompted. there are all kinds of pictures "showing" me how to do it but I cant call anyone to
-
E4200v2 Needs - - Added supports of 3TB Hard drive with NTFS and HFS+ format
I see this was addressed in the E4200v1 firmware, but isn't currently supported with v2. Obviously this was something you deemed important once already, I don't understand why it wasn't automatically added into the features of V2. Also, would it be p