AUSP class type 023 batch

Hi
I have few milion of entries in class type 023 - batch in AUSP table?
In MCH1 I can see only few thousands entries for batches linked with material.
But for those I can not find any relavant entries in AUSP.
We are using very limited functionality of batch management. No classification is maintained for batches.
What are the other objects (than material) that uses batches?
I need to answer the question if entries in AUSP can be deleted or archived?
Thanks for hints
Mariusz

this means you have values for characteristics that are not anymore in your system.
Please have a look into OSS Note 501463 - Deletion of table AUSP not complete
and Note 127635 - ZCLINOB2: Comparison tables INOB/AUSP against KSSK.
maybe they are helpful for your
Do you exchange batches with a APO system?
I have seen many OSS note while searching OSS with keyworkds "AUSP inconsistent"
MAybe there are more helpful reports for you to check and correct such data.
If you are unsure, then you should open a message to SAP

Similar Messages

Multiple classification In Class Type 023(Batch Class)

Dear All,
I like to do a multiple classification in Class Type 023(Batch Class) but in Configuration System not allowed to do any change in MCHA Object for multiple Classification
So pls give me a suggestion.
Regards,
Murari Shah

see OSS Note 115581 - No multiple classification for batches

About Batch classification(Of class type 023) in new batch

hi:
   I had assigned a batch class 'ZBC'(Of class type 023) to material 'A'. So, when I use t-code "msc1n" to creat a new batch for the materia A, I find the system does not check the 'classification' view ,and after maintaing 'Basic Data1' view , I can directly save new batch even if the values of batch character is empty.I had specified the batch characer must be entry value in the batch class 'ZBC'(Of class type 023).
    I want to system check it ,and give me a message for it ,and couldn't save the batc if the values of batch character is empty.
   So ,I wonder how to control it?
Edited by: kaien wang on Jun 10, 2009 5:40 AM

Dear Amitabha,
Thans for you attention.
In my characteristics definition, I didn't use any reference table field . the values of 'addnl data' view in the characteristic is keeping blank.
best regards,
yours kaien

How to change material classification for class type 023

Hi Expert,
I want to change class ZSK_EXPIRY_DATE to ZSKK_GR_DATE under class type 023 in classfication tab (MM02). Understand that the same class also assigned to material and batch in MSC3N. So i'm sure it's not as easy asdo the direct change in CL20N. Can i anyone please guide me step by step to change it? What is the pre-requisite and the impact of the change that i have to care of..
Thanks/Regards,

Hi Crystal,
You consume all the materials created with the earlier batch classification and then try to change it. or keep the assinged class and then create your new required class and then assign the new class to the material in classification view and start using the new one.
Chris

Internal class type 023 cannot be used in class maintenance

Dear PP gurus,
I am creating class from t code CL01 and while entering class type 023 , i am getting a error message
"Internal class type 023 cannot be used in class maintenance" . when i pressed F4 , in the list 023 is not present.
In the develpopment client , when i do the same 023 , it allows be to create class
pls help me wher i am missing or?
Regards

Hello All,
I am facing a similar problem.
I have checked the following customization "SPRO --> Cross Application component -->Classification system --> Class --> Maintain Object type and class,
Here select the MARA table click on the object and check class type 023 is assigned or not."
Class type 023 is not assigned there. When i try to add a new entry I get the following error message
"Specify the key within the work area".
I referred to the following note :OSS Note 1066606, but that is concerned with AFS component.
Kindly provide me a solution as soon as possible.
Regards,
Julia

Class type not defined for this object type

Hi Friends,
Could u please guide me ?..We have a requirement to extract some data from classification system.
This is related with class type 023 - Batch
I want to use the following parameters in CTBW.
basis datasource :Z_BATCH_ATTR
class type : 023
object table :MCHA
Datasource type : ATTR
I am getting an error "Class type not defined for this object type" when i enter the above entries in CTBW.
The only way I'm being able to make this work is changing object table from MCHA to MCH1.
This solution does not fit me bacause MCH1 table dont have Plant as Key, and I need it.
Do you know what should I do to solve this?
Thanks in advance

Hi,
I believe we have to use the list of standard "Basis DataSource", as I'm also stuck with the same issue. Let me know what Basis Data source you selected in this case.
As I'm trying to extract Batch attributes from "AUSP" Table.
I have given class type= 023
Obj Table= AUSP
But not sure which "basis datasource" I need to select.
Thanks,
Satish

Want to know more about class and class type and characters in batch determ

hi ,
i want to know abt class functionality and how it is related to batch mgt,means functions of class type , characters etc.
ok thanks

Hi ,
Find the Class and Class Type for Batch Determination.
Create Class for Batch Management
Use
In this step, you define two classes for use with batches. One class contains the characteristic LOBM_VFDAT: Expiration Date, and the other class with three characteristics:
LOBM_RL: Remaining shelf life for batch,
LOBM_LFDAT Batch determination delivery date, and
LOBM_VFDAT Expiration date, shelf life.
Procedure1.
Access the activity using one of the following navigation options:
Transaction Code: CL02SAP R/3 Role Menu     Installation ® Create Class for Batch Management
2.Choose Create and maintain the necessary master data manually. The relevant data can be found in the file:
Class     Class type     Description     Characteristic        Characteristic     Characteristic
023_001     023     Products with Expiration Date     LOBM_VFDAT
023_002     023     Search class with expiration date     LOBM_RLZ     LOBM_LFDAT     LOBM_VFDAT
Result
The materials are later assigned to class 023_001 in the material masters. 023_002 is used in the batch determination search strategies for SD and PP/PI.
Regards,
SAROSH

Batch Classification by class type 022

Hi all,
We are using batch management at material level and present class type 023. We are looking at changing the class type to 022 as we need some information to be retained at plant level.
While creating class for class type 022 the system gives an error " Internal class type 022 cannot be used in class maintenance
Message no. CL089"
Can somebody let me know the reason and solution for this error? Is it due to the fact that we have set the batch at material level?
Also, it would b great if someone can share his/her experience in changing batch clases, even class conversion.
Best Regards,
VS

Hi VS,
I think that you should change the customizing first. Class types 022 and 023 can not be created simultaneously. It is either 022 or 023.
Be careful : I did it long time ago but there is one way you can do (023 to 022 or 022 to 023 I don't remember) but you cannot reverse it.
Rgds,
Philippe

Strategy Types in Batch Search Strategy (Process Order)

Hi Expert,
What are the difference between the strategy types - Order type/Plant/Mat, Order type/Plant, Prod Material?
For Order type/Plant combination- If my criteria is to do automatic batch determination at process order release against the sort rule characteristics (LOBM_LWERT) GR received date. I maintained LOBM_LWERT in all material classes, now in selection criteria which class I will choose as different materials contain different class in the class type 023.
I am confused.
In case of Order type/Plant/mat- number of master data is huge.
Pls suggest
Krish

Got answer.closed

Activation of History Log for Material Classification CLASS TYPE 001

Hi All.
I've a question about this object.
We need to launch RCCLUKA2 to activate multiple objects registration and to generate history log for changes in classification of materials (AUSP table).
Reference are sap notes 942691 and 943559.
I FOUND OUT THERE'S a big problem. RCCLUKA2 change AUSP objek key, using internal number range from INOB objects.
There're hundreds of custom reports and other stuff that read AUSP directly with Matnr Code as objek key.
I think that's a serious problem, isn't it? Or is there any solution about ?
Thanks for Help!
_______> old message
This report RCCLUKA2 does 5 steps.
1 step: activation flag for multiple objects in table TCLA and TCLAO only for input class type (in this case 001 -> MATERIAL);
2 step: download of KSSK data and AUSP data in two text files (name defined in input parameters);
3 step: delete all KSSK data and AUSP data for class type 001, 10.000 records every loop;
4 step: create reference object in table INOB for all records inserted in KSSKFILE, inserting all records in KSSK table at END of INOB upgrade;
5 step: inserting record in AUSP table from all records inserted in AUSPFILE, using INOB objectid created in step 4.
DEQUEUE ALL
We think that this process is a little bit dangerous in production system, due to procedures that always run, in background or foreground.
I've found a work around that creates an implicit enhancement for LCLVFF10 form FILL_REDUN.
I think that it's not suggested to create this enhancement because of the missing flags in TCLA/TCLAO and missing reference in INOB and KSSK database.
This enhancement would create records only in CDHDR and CDPOS with a general key object reference (such concatanate matnr(without-letters) mafid and atinn code).
This enhancement couldn't also activate the standard function of reading document changes from standard menu in MM03/MM02/MM01, etc..
Do you have any suggestion about this?
RCCLUKA2 is a very old report. SAP didn't give any advice or upgrades for this need?
Thanks for your help
Message was edited by: Roberto Vacca

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

Class type 022 is not defined for object for batmas in LSMW idoc

Hi Experts,
while creaitng the LSMW for batch classification,I faced the error during IDOC processing as "Class type 022 is not defined for object".I am using
Business Object BUS1001002
Method SAVEREPLICA
Message Type BATMAS
Basic Type BATMAS03
Pleas guide how to resolve the error.
Also ,as I intend to make LSMW for batch classifications.Is this the correct way.
Please guide on this also.
Regards.

Hi,
Go to TCode OMCE and check the batch level.
If batch is activated at material/client level then use class type 023, if it is at plant level the class type 022.

More than one class type for a Material

Hi All,
We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
I searched forum, it is given that, it is possible to maintain different Class types for a Material.
But I tried, I couldn't do that.
Please help me to extend a Material to another Class type.
Regards,
Raja Durai

Hi Raja,
You can maintain different classes for same material.
Go to material master and go to Classification view. Go to Extras->Change class type (F7)
Now you can add a class of different class type.
Please see below snapshots for more details.
Thanks,
Dattatreya N R

How to get Class Type form Material Number

Hi All,
Based on the Material Number I have to get the Class Type and Class Number.
I tried with FM -- QMSP_MATERIAL_BATCH_CLASS_READ
but it always shows Class type = 023
and database table for object = MCH1 for any given material number.
Please help me out.
Thanks & Regards,
Moni

HI Moni,
Please check these FM.
CLAF_CLASSIFICATION_OF_OBJECTS
CUD0_GET_VAL_FROM_INSTANCE
CE_I_GET_CONFIGURATION
VC_I_GET_CONFIGURATION
VC_I_GET_CONFIGURATION_IBASE
look for the characteristics and charactertic values in tables
ALLOCVALUESNUM
ALLOCVALUESCHAR
ALLOCVALUESCURR
if this is not working
you can also get these information directly from the tables.
KSSK - object class assignment
and KSML - class characteristic assignment
and for char values use table AUSP
Thanks!

Change documents of material master classification class type 001 and 300

Dear guru ,
I want to see the history of change documents of material master classification using MM02.
The system allow to see the history only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
I must do some settings or the function for these class type arenu2019t available ?
Thanks.

Dear ,
changes in values for a characteristic can be monitored in CL20N but as for MM02/MM03 transaction only for class type 023.
For class type 001 or 300 the change document isnu2019t available.
Thanks.

BAPI_OBJCL_GET_KEY_OF_OBJECT - Class type 001 requires additional objects

ABAP'ers
I am trying to use BAPI's to complete class assignments (mimicking CL20N).
I am using BAPI_OBJCL_GET_KEY_OF_OBJECT to get the internal object key that is needed for BAPI_OBJCL_CHANGE_KEY, which I am using to complete the classification.
When I execute BAPI_OBJCL_GET_KEY_OF_OBJECT for class type 002 I get the internal key needed for the second BAPI.
When I execute the same BAPI for class type 001 I get the following error:
"CL669 - Class type 001 requires additional objects"
I have seen other posts on the forums on how to do this for class type 023, but I need to complete this for class type 001.
What are the additional objects needed?
Can I use this feature if a material HAS NOT been extended to a plant or storage location?
I have looked in table INOB and there are no entys for this class type - is this normal? Is there something that I am missing?
I have already tried internal and external values, concatenating with the client number and plant number but still get the same error.

Hey Chris,
You cannot use the BAPI for class type 001, This BAPI can only be used with class types which have multiple objects enabled.
For changing the characteristics of material try using BAPI_OBJCL_CHANGE.
Here the key of the object will be your material number

AUSP class type 023 batch

Similar Messages

Maybe you are looking for