Automated storage type and bin in wms

hi
In continuous how can we use the fixed bin method in the mm01 without using the putqway strategy
how to get the storage type and bin in the transfer order at the destination pop up.

Hi
On navigating the transaction MM01 --> Organization level , you can get a field storage type below the plant and warehouse number fields.
After entering into the Warehouse view, you can find a section
"storage bin stock"
and enter the Bin against the field
"Storage Bin"
Gobinathan G

Similar Messages

Automated storage type and bin

hi
thanks for givining reply
i extened the mmo1 and while doing the lt06 this storage type is coming in the destination place but the bin not coming error is coming there is no bins in the storage type
can u tell me is there any setting required in storage type .
fixed bin means which u mentiones in wm2 view i had given only some bin which created in the storage type .is it correct.i will not activated the storage section check in storage type .
can u tell me step by step .

Hi,
Here you can find the prerquisits of fixbed bin putaway strategy:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f844834afa11d182b90000e829fbfe/frameset.htm
When you get the error message, please goto menu > Enironment > Stor. Bin Search Log - here you can see what is the problem.
In LX03 you can list the existing storage bins in your stoarge type - make sure you really have the bin.
Regards,
Csaba

In wms continuous to the automatic storage type and bin in the destination

hi
Thanking for givining the solution ,In continuous to the automatic storage type and bin in the destination your telling that fixed bin should be enter in the wm2 view in the mm01 ,
i am not getting fixed bin means which bin should i enter in the mm01 wm2 view can explain clearly.
thanks

First you create your WM views in MM01 with just entering the warehouse number but no storage type in the organisation pop-up.
Once you have done this and saved the material master, you do again MM01 for the same material number and select the WM 1 and 2 view and enter the warehouse number AND the storage type number in the organisation pop-up.
Now SAP gives you some more fields in WM2 view. AMong them the fields you are looking for.

Storage Type and storage bin in MB26 pick list

Hi,
We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
Thanks,
Shekhar

if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
Please let me know if thhis helps.

How to distribute HU items in to diffrent storage types and diffrent BINS

Hi
I have one handling unit and I have done empty all 4 items in it HU02
As a result one material document created
But How can I distribute all items in to diffrent storage types and diffrent BINS
No TR and Posting change created at material doc
What is the config settings to cretae TR ot Posting change notice and Movement types
Kindly Help

yes LT10

LT04 - User exit to add storage type and storage bin

Hi!
I am looking for a user exit to populate the destination storage type and storage bin (Fields-LTAP-nltyp and LTAP-NLPLA). The user uses tcode LT04 to createt transfer orders from transfer requirements.
The program name is SAPML03T.
Please let me know if anyone has any clue.
Thanks in advance,
Manasa
Message was edited by:
        manasa

I don't the exact User-Exit...And there are like 104 of them...So why don't you use this report (Not mine) and find out yourself -:)
REPORT zdummy_atg_2.
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
      SELECT SINGLE * FROM TRDIR
      WHERE NAME = TSTC-PGMNA.
      IF TRDIR-SUBC EQ 'F'.
        SELECT SINGLE * FROM TFDIR
        WHERE PNAME = TSTC-PGMNA.
        SELECT SINGLE * FROM ENLFDIR
        WHERE FUNCNAME = TFDIR-FUNCNAME.
        SELECT SINGLE * FROM TADIR
        WHERE PGMID = 'R3TR'
        AND OBJECT = 'FUGR'
        AND OBJ_NAME EQ ENLFDIR-AREA.
        MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
      ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT IN ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
      WRITE:/(105) SY-ULINE.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
* Sorting the internal Table
      SORT JTAB BY OBJECT.
      DATA : WF_TXT(60) TYPE C,
      WF_SMOD TYPE I ,
      WF_BADI TYPE I ,
      WF_OBJECT2(30) TYPE C.
      CLEAR : WF_SMOD, WF_BADI , WF_OBJECT2.
* Get the total SMOD.
      LOOP AT JTAB INTO WA_TADIR.
        AT FIRST.
          FORMAT COLOR COL_HEADING INTENSIFIED ON.
          WRITE:/1 SY-VLINE,
          2 'Enhancement/ Business Add-in',
          41 SY-VLINE ,
          42 'Description',
          105 SY-VLINE.
          WRITE:/(105) SY-ULINE.
        ENDAT.
        CLEAR WF_TXT.
        AT NEW OBJECT.
          IF WA_TADIR-OBJECT = 'SMOD'.
            WF_OBJECT2 = 'Enhancement' .
          ELSEIF WA_TADIR-OBJECT = 'SXSD'.
            WF_OBJECT2 = ' Business Add-in'.
          ENDIF.
          FORMAT COLOR COL_GROUP INTENSIFIED ON.
          WRITE:/1 SY-VLINE,
          2 WF_OBJECT2,
          105 SY-VLINE.
        ENDAT.
        CASE WA_TADIR-OBJECT.
          WHEN 'SMOD'.
            WF_SMOD = WF_SMOD + 1.
            SELECT SINGLE MODTEXT INTO WF_TXT
            FROM MODSAPT
            WHERE SPRSL = SY-LANGU
            AND NAME = WA_TADIR-OBJ_NAME.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
          WHEN 'SXSD'.
* For BADis
            WF_BADI = WF_BADI + 1 .
            SELECT SINGLE TEXT INTO WF_TXT
            FROM SXS_ATTRT
            WHERE SPRSL = SY-LANGU
            AND EXIT_NAME = WA_TADIR-OBJ_NAME.
            FORMAT COLOR COL_NORMAL INTENSIFIED ON.
        ENDCASE.
        WRITE:/1 SY-VLINE,
        2 WA_TADIR-OBJ_NAME HOTSPOT ON,
        41 SY-VLINE ,
        42 WF_TXT,
        105 SY-VLINE.
        AT END OF OBJECT.
          WRITE : /(105) SY-ULINE.
        ENDAT.
      ENDLOOP.
      WRITE:/(105) SY-ULINE.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No.of Exits:' , WF_SMOD.
      WRITE:/ 'No.of BADis:' , WF_BADI.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
DATA : WF_OBJECT TYPE TADIR-OBJECT.
CLEAR WF_OBJECT.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
READ TABLE JTAB WITH KEY OBJ_NAME = SY-LISEL+1(20).
MOVE JTAB-OBJECT TO WF_OBJECT.
CASE WF_OBJECT.
    WHEN 'SMOD'.
      SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
      CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    WHEN 'SXSD'.
      SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
      CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Greetings,
Blag.

Default settings for source storage type and storage bin ..

Hi,
While doing Transfer Order ,I want to make the source stage type and bin as default values.Where can I make these settings?
i am using normal WM and not Lean WM
Edited by: Roopak India on Sep 4, 2009 7:22 AM

Please check settings as mentioned
1. SPROEnterprise StructureAssignmentLogistic Exe check all the assignment here
2. then SproLogistic ExeWM--master data , check whether storage types are properly defined or not
3. then you have to Activate the search strategy at SproLogistic ExeWM--strategy --> Activate Storage type search
Thanks,
Raja

CO27 is showing blank values in Warehouse,Storage Type and Storage Bin

Hi Gurus,
I am using CO27 to generate pick-list for a production order. The pick-list is being used by Warehouse team to Goods Issue for the Production Order.
However, the problem that I am facing is that in the pick-list generated from CO27 is showing blank values in Warehouse,Storage type and Storage bin.
So, it is becoming difficult for the Warehouse to do the picking based on this pick-list.
Could you please advice how the fields Warehouse,Storage Type and Storage bin can be populated in the Production Order pcik-list.
Is these values are fetched from Material Master data or any other place?
Thanks & Regards
Subhasis

Hello
You should implement the following note:
384427 - CO27/COIK: Storage bin is not displayed
BR
Caetano

What is storage type and storage bins

explains the terms, storage type and storage bins, stock at production storage

Hi Ahmed
Inventory Managemenet can be done either at Storage location ( using Lean warehouse Management)or at storage bin level ( using full warehouse Management).
General ( EWM)
[http://help.sap.com/saphelp_scm50/helpdata/en/5f/c69040bca2ef4ae10000000a1550b0/frameset.htm]
Storage type
[http://help.sap.com/saphelp_ewm2007/helpdata/en/97/d94541c47a6e24e10000000a155106/content.htm]
Storage bin
[http://help.sap.com/search/highlightContent.jsp]
[http://help.sap.com/saphelp_sm32/helpdata/en/35/26c132afab52b9e10000009b38f974/content.htm]
Cheers !!
Ajay

LT06 enhancement - How to update Storage type and Storage section

Hi,
My requirement is to update Storage bin, Storage type and Storage section, while creating Transfer order from through LT06. So I used the enhancement MWMTO003 to update Storage Bin in LT06 and it is also working.
Similarly I need to update Storage type and Storage section using userexit or BADI.
Is there any way to update Storage type and storage section in LT06?

Check enhancement MWMTO007.
regards

Transfer between storage types and putaway strategies

Dear All,
Here is my scenario and please guide me on as detailes as you gurus can on how to proceed achieve this:
When receiving good from a PO the materials are received in 902: How to move them to my Raw materials storage type?
Note: I have defined 4 storages types, one for raw materials, one for production, one for Finished goods and one for spare parts.
And once I move the materials into the warehouse, what strategies do I have to define in order to place the materials in specific bins? Here's an explanation on how I need the putaway:
I have 5 different racks or stacks but I need all materials to be placed in a specific row of the first level, lets say material A in 01-A-01 the first 2 digits are stack then level then row(SS-L-RR); Material B should be placed 01-A-02 Material C 01-A-03; meaning all the materials should be placed in the level A of stack 1 but if there is another recepit of material A and it is already full then the system should propose another bin doesn't matter which one as long as it is not in the first level (because this positions are reserved for other materials).
This is the same for materials D, E, F but those are to be placed in stack 02 in level A
I need this because that's the way my client work right now, it is like Lean manufacturing strategy, so whenever they need to pick materials they always have them available at the lowest level
Is there an automatic bin to bin TO creation for when the picking empty the bin at the lowest level then a TO should be triggered automaticaly saying move from whatever bin the material is available to the "fixed" bin assigned in level A
Stack 1                         Stack 2
Level     1     2     3          Level     1     2     3
D     free     free     free          D     free     free     free
C     free     free     free          C     free     free     free
B     free     free     free          B     free     free     free
A     A     B     C          A     D     E     F
The variable here is that as I said before I have 5 Racks so in the other 3 stacks doesn't matter the levels, the materials can be placed wherever, and this will happen when receiving material A but all stack 1 is full then system should try to place it in the nearest bin available of stack 2 (only levels B, C, D) or if this is also full, then goes to stack 3 ( all levels available)
Please advise on how to map this, and the transactions and mvt types involved, and also please explain how should I make the picking or removal strategy to propose the picking always from the specific lower level bin, if not enough qty available then go and pick from other bin (and if it is possible at this point to create a TO to refill the fixed lower bin)
Thanks in advande to all.
Julio

Hi,
Try using movement type 313 and 315
313 -- Transfer posting SL to SL --- Remove from issuing SL
315 -- Transfer posting SL to SL -- Placing in Receiving SL
Regards

Bin to bin transfer from SU managed storage type to NON SU storage type

Hi Experts ,
Kindly guide as how i can perform Bin to bin transfer from SU managed storage type to NON SU storage type
Thanks
Jinoy

There is no particular technique for this. You can use single or collective method (LT01 or LT10).
Provide the source SU and destination storage type and bin and save the TO. Your transfer will be complete.
The SU number will be lost because you have moved the stock to a non SU storage type.
Regards,
Aroop

SAP Warehouse Management change Storage Type Bin type while creating TO

My requirement is to find an exits which allow us to change the Destination Storage Bin and storage type when creating Transfer orders through Inbound Deliveries.
I have tried using "MWMTO003", "MWMTO004". But the problem here is that none of the funtion exits have both storage type and bin as exporting parameters.
The exit "EXIT_SAPLL03A_001" has Destination bin (LTAP-NLPLA) as a changing parameter but not Destination storage type.
I have activated the check box to trigger User exits using SPRO->LE->WhM->Master Data->Define Storage Type and Activate.
I got a BADI "LE_WM_STORAGETYPE_HU" with both Storage bin and type as changing parameters but then when I activate it and put a break point. My control never stops there.
Kindly Suggest what is the correct User Exit required for this?
Do i need two User Exits to change Storage Type and Storage Bin?
Kindly provide how to approach.

I managed to change the casetype now by
1) Changing the corresponding SCMG_T_CASE_ATTR entry
2) Changing the record model POID in the XML file of the case, by manually parsing and replacing the XML
Still wondering if this is a valid approach, or if I've overlooked something...

Inventory load using 561 movt type and auto confirm TO in MB1C using 561 movt type

Hello All,
I am doing the inventory load using 561 movt type in MB1C. Then the material is in 998 storage type and bin "AUFNAHME". my requirement is that i want to confirm the TO, when i do the MB1C itself for the 561 movt type. Is there a way in the SAP, where i can trigger the TO confirmation in the background automatically, when i use 561 movt type in MB1C.
Right now my thought processing is that as below,
i create the inventory load using 561 movt type in MB1C and use the LT10 and move the stock to a different bin and confirm the TO.
In the above step, i am using LT10 as a extra step for confirming the TO, which i am trying to decreasing my configuring in such as way for the movt type 561, so that it will automatically confirm the TO in the background, while doing the MB1C.
My 2nd question is, when i have 5000 different materials, which are inventory loaded using 561 movt type and MB1C. I am trying to auto confirm the TO in the background, when doing the MB1C for 561 movt type itself.Secondly, if it doesn't work, then i can goto LL01 and pick the unconfirmed TOs and mass confirm the TO's.
On the whole, my questions are is there any std config in SAP to auto confirm the TO for movt type 561 in MB1C. If it is not possible, then i need the best way to mass confirm the TO's in SAP.
Thnks,
Kapil

Hello Kapil,
Let me explain the process step by step
Assumption/mandatory criteria- The process is applicable only in case you do not have storage unit management active This process is warehouse transfer w/o WM transaction. This method is based on principle of MB1A- 711/712 movement type.
(1) Use OMJJ and create new movement type by coping 561 for ex- "Z61". In field selection (flield selection from 201) double click on WM and make the entry "WM storage bin and storage type as required entry from suppress.
(2) Now use MB1C with above customised movement type. At the end of this transaction,system will take you to the screen to make an entry in storage type and storage bin. Post the entry.
That's it. Your stock would be in warehouse as well as IM stock would be in sync. There is no TR/TO. You can create LSMW to upload the data by this method. If you have SUT defined then you can follow the same process as above. But after that do not forget to update LQUA-LETYP field with respective SUT. However, you can not use this method in case you have SU management active.
My view with this upload process- Please use other data uploading method which are not at all time consuming. In more than 90% of most of the business scenarios, storage unit type is used. Hence you will have to perform additional activity of updating LQUA-LETYP-storage unit type field. If this is the case, then why cant you use other uploading method?.
Thanks,
Milind

Sorting for storage type in LM12

LM12 - change sort display so that alpha storage types with bin info displayed before numeric storage type and bin info.
The standard LM12 shows sort order for storage type as numeric storage types first then alpha storage types.
But User is requesting that alpha storage types are displayed first along with relevant info in alpha order. Standard SAP displays numeric storage type first and then alpha storage types.
Plz can any one help us to give solution for above issue.

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Automated storage type and bin in wms

Similar Messages

Maybe you are looking for