Automatically assign a BP Grouping for a BP Role

Hi, everyone!
I would like to automatically assign an specific Grouping range for a BP when creating it in an specific Role. Now, the user has to select each them separately and sometimes makes mistakes because he selects a wrong Grouping for the Role he is selecting.
Can this be done? I will appreciate a lot your help.
Thanks in advance.
Adolfo Garay

Thank you very much, Javier! I will try to explore this. By any chance, do you have any example that could help me to do this?
Anyone else have some examples that can be useful for this case?
Regards,
Adolfo

Similar Messages

New BP grouping for existing BP role

Hi Media experts,
We have a requirement to add a new BP grouping for an existing role(Retailer- ISM001) which enable us to create a BP in the retailer role with a different number range. So we created new grouping and customer account group and assigned a new number range.The problem is that we created BP with the new number range but in change mode it shows only the general data.System not showing the company code and sales area datas.
Note: Integration is BP to Customer
Please give a solution
Thanks in advance,
Regards,
Srikanth.M

Thanks for your reply
As you mentioned we checked the configuration, but it is quite okay. We normally create BP with the same settings. You mean to say that we need to change the configuration under u2018Configure Field Attributes per activityu2019 for the new BP Grouping we created? Could you please explain little more about how BP Grouping (Newly created) links with the above mentioned customizing activity? Isnu2019t this customizing common in create, change display activity irrespective of BP Grouping?
with warm regards,
Srikanth.M

Automatic assignment of output message for delivery schedules changes

Hi,
we have defined an output type ZDSS for scheduling agreement release. For perticular Delivery schedule documents we are getting the below error.
Diagnosis
An unprocessed output exists (output type ZDSS) has been deactivated.
System Response
Output type ZDSS will no longer be determined.
It seems some user has set the unprocessed outpout type ZDSS of this document to deactive (permanent) status. I need to reactivate the auto assignment of output type for these documents.
Can someone let me know as to how can i reactivate this unprocessed output type OR delete this output type entry from the document?
Please suggest.
Regards,
Prashant

Hi,
Problem is solved on my own... Closing the message.
Regards,

Assigning a different mask for the same role

Hi All,
I have two users user1 and user2 are created in MDM and each assigned to the same role say role1.
My requirement is user1 should get data of catagory 1 where as user2 should get all the main data in MDM.This catagory 1 is part of the main data.
For this scenario i have created a mask say for example catagory1_mask for catagory1 data and assigned this mask to the role role1 where user1 and user2 are being assigned to this role.
And i have one more mask all_mask for user2 where i have assigned all the records of the main table to this mask. So when user2 logs into the MDM he would get all the data in MDM.
If i assign this all_mask to the role1 user1 cal also access the whole data including user2. But as per the rqmt user1 should not access the whole data but have to access only catgory1 data.
Can anybody advice me how can i assign a different masks to a one role when 2 users have been assigned the same role?
Regards
Sireesha.

Hi Jitesh,
I am getting one issue after creating duplicate role in portal.
As u know i have created 2 duplicate roles for user1 and user2. Before creating the duplicate role i was able to see the user1 and user2 in the SRM MDM UI page of general tab.
After creating the duplicate roles for these users am not getting the user1 and user2 in the User dropdown field of MDM UI screen...
Is this bcoz of creating duplicate role?
How can i get the user1 and user2 here?
Please advice me...
Regards
Sireesha.

Order type automatically assign to product wise for order

Hi all,
I gave 4 types of Orders for one plant as per products. The client ask me assign that orders automatically for each product in routing how i will assign please let me know.

Actually routing has no relation to order type.
You can use Production Scheduling Profile as well as Production Scheduler/Supervisor.
Firstly, you need to create 4 Production Scheduling Profile and assign 4 Order Type to Prd Sch. Profile.
Then you need to assign the Profile to material in Work Scheduling view.
Another way is that you can create Production Scheduler/Supervisor and assign the Pro Sch Profile to the Prd Scheduler, then assign Prod Scheduler to Material Master in Work Scheduling view also.
From now on, whenever a production order is created for material, order type will be get from the Scheduling Profile.
To maintain the Prd Sch Profile and Prd Scheduler in IMG: Production > Shop Floor COntrol > Master Data

Is it possible to automatically assign a prefix number for all outgoing cal

Is it possible to setup a rule in in my contacts to automatically dial a specific prefix (my long distance provider number) before calling any long distance number?
It's kinda annoying having to first dial my long distance provider and then manually type in the long distance number (after having to memorize it first) I want to call.
One way around this is to key in the long distance number manually into all my long distance numbers, but I'd rather not do that.
Any suggestions on how to go about this?

try this app

OBA4 FI tolerance groups for users - GL account

Dear All,
May I know where is the gl account defined for the permitted payment differences? If in FBKP, then which group to define?
Thanks

Hi
Please use the below mentioned path to define tolerance groups for users and also refer to follow the below link
For normal price difference clearing use the Tcode:OBXL
http://www.scribd.com/doc/51496069/17/Assign-User-Tolerance-Groups
for details please go through the below mentioned points
SPRO>Financial Accounting>General Ledger Accounting>Business Transactions>Open Item Clearing>Clearing Differences>Define Tolerance Groups for G/L Accounts/Define Tolerance Groups for Employees
Upper limit for posting procedure
Maximum Amount Posted per Document
Maximum permitted posting amount per document for this user group.
The posting amount is the total of all debit items or, similarly, the total of all credit items.
Maximum Posting Amount per Line Item
Maximum posting amount permitted per customer or vendor item for this user group.
Maximum Cash Discount Percentage Rate
Maximum cash discount percentage rate which may be assigned by an employee of the user group.
Use
The percentage rate is checked during the entry, change and clearing of open items.
Note
The restriction does not apply to automatically created line items, for example, during payment settlements.
Permitted payment difference
Maximum Payment Difference for Revenue
Payment differences to our advantage are allowed up to the amount entered here.
The amount always refers to the local currency. Payment differences up to the amount entered here are posted automatically by the system as increasing the profit. The system creates line items to show this.
Note
In addition to the amount, you also enter a percentage rate in the Percent field. The lower limit is valid. If you only want to use absolute amounts or percentage specifications, then you must enter the maximum value in every other field.
Note that you define these limits for your customers/vendors and your employees. The lower limit is valid.
Example
The local currency is USD. You have entered 30 USD in the Revenue field and 1 in the Percent field. For incoming payments up to 3000 USD, you accept an overpayment of a maximum of 1 percent. That means, amounts of 0 to a maximum of 30 USD are tolerated, depending on the incoming payment amount. For incoming payments over 3000 USD, you accept an overpayment of up to a maximum of 30 USD.
Maximum Allowable Revenues from Payment Differences
Differences when settling payments are accepted and posted automatically by the system up to the percentage rate entered here. The percentage rate is only valid if the difference is posted as a gain.
The percentage rate is used for the maximum of the debit and credit totals of the items to be cleared.
Note
In addition to the percentage rate, you also enter an amount in the Revenue field. The lower limit is valid. If you only want to use absolute amounts or percentage specifications, you must enter the maximum value in every other field.
Note: You define these limits for your customer/vendor and your employees. The lower limit is valid.
Example
The local currency is USD. You have entered 30 USD in the Revenue field and 1 in the Percent field. For incoming payments of up to 3000 USD, you accept an overpayment of a maximum of 1 percent. That means, amounts of 0 to a maximum of 30 USD are tolerated, depending on the incoming payment amount. For incoming payments over 3000 USD, you accept an overpayment of up to a maximum of 30 USD.
Maximum Discount Adjust. for Gain from Payment Differences
When clearing payments, any payment differences up to the amount specified here are corrected with the cash discount posting as long as the cash discount amount is large enough for the adjustment. The value you specify here is used for differences that represent a gain.
Regards
Praveen PC
Edited by: Praveen Chirakkel on Apr 12, 2011 6:46 AM

Self-registration user assigned to anonymous group auto

hi experts,
how can i make the user self-registration user belong to anonymous group,not everyone group
best regards
zlf

Normally self registered users automatically assigned to everyone group. If client needs they should automatically assign to someother group , it is the only possibility in my point.
Ulitimately when modifying standard groups, this consultant should think about it whether modification really needed ?
It is just an idea
Koti Reddy
Edited by: Koti Reddy Chimalamarri on Feb 8, 2009 12:03 PM

Account groups for Partner Roles in Vendor Master

1. Can we use same account group to create the vendor master for the different partner roles? for the partner roles like goods supplier, invoicing party, order party, etc do all these need to have different account groups , example one account group for goods supplier, one account group for invoicing party, etc , etc.
2. why we need the configuration for partner role in purchasing documents besides partner role settings for vendor account group. what is the logic behind to have partner role dependent settings for purchasing documents.
If we do not maintain for partner role settings for purchasing documents what effects it will cause?

> 1. We can have 1 account group represent all partner role or separate account group for each role.
1.If we use the same account group, the field selection control for fields will be applicable to partner roles also. If we have made vendor schema as mandatory in vendor master than we have to assign to partner vendor also. Example ordering address will not require company code data only purchase data, it will not require also pricing procedure as mandatory as no price determination will be required for ordering address.
I think we have to use combination of account group -same account group and different account group will defining vendors for partner function.
Do we require to assign vendor schema group to following vendors roles- goods suppliers, invoicing party and payee.
If we do not assign vendor schema group will these partner role determine price from the VN partner role. For example VN (vendor) has vendor schema group assigned, no vendor schema group assigned to invoicing party, then while doing MIRO the invoicing party will be defaulted. Do the price determined for VN role will be populated for invoicing party in MIRO?
> 2. we need partner role in purchasing doc because we can copy partner role from vendor master to purchasing document
It means we need to assign similar roles in schema for vendor account group and purchasing documents. If you see the schema in config for partner determination in IDES system, different roles exists in vendor schema and purchasing document schema.
This is creating confusion for me to understand.
Please clarify
2. we need partner role in purchasing doc because we can copy partner role from vendor master to purchasing document

Assign COPA Char Group to PR/PO screen

Hi,
I want to assign COPA screen to appear during PR/PO creation. I have assigned the business transaction RMBA, RMBE & RMBL in the 'assignment of char group for assg screen' (KE4G). But, still during PR/PO creation, the COPA screen does not appear in it.
Is there something that I must do before this changes take effect?
TQ.

already got the answer.
need to set the PSG as optional entry in PR/PO config (OME9).

Origin Group for PO

Hello,
can i assign a origin group for a PO without material number? I will use this origin group in my costing sheet for defining a separate base row for POs.
Thanks for any help.
BG

Hi,
thanks for your fast answer.
Did you mean taking a dummy material for the po? Is there any possibilty to get the assignment without material number?
BG

Automatic assignment of order to an order group

Hi Gurus,
Is there a way to automatically assign an internal order to an order group?
For example when the user creates an order the order gets assigned to an order group automatically either through some attributes in the order master data or through a dialog box prior to saving an order.
Thx

Hi Sivakumar,
Do you mind elaborating on your answer. How would I setup attributes in KOT2 to invoke KO01 to ask for an order group before creating an order.
Thx

Automatic assignment responsible group partner function of Activities

Hi,
I need help on below requirement>>
Automatic assignment responsible group partner function of Activities when status is set to u201CIncorrectly Assignedu201D.
Thanks

you can check with order status badi
BR
Radek

Automatically Assign Control Key for External Assignment

Hi All,
Please can someone advise how I automatically assign the External Processing Control Key at the operation level using the Work Centre.
I have a Main Work Centre set up which is linked to every Functional Location. This Work Centre has a default Control Key PM01 - Plant Maintenance - Internal, assigned.
I also have a second Work Centre which has Control Key PM02 PLant Maintenance - External, assigned.
When I create a Work Order the system uses the Control Key assigned to the main work centre and assigns this at the operation level.
When I change the Work Centre for Operation 010, to the second Work Centre (PM02 Control Key) it doesn't pull this through to the operation. I have to change this manually.
Could someone explain why this is the case and how I resolve the problem.
Any help appreciated.
Regards
Chris

Teshin,
Thanks for the information. I have checked the OSS Note the issue is as discribed in the note.
I will look to implement the program corrections shortly and will confirm that the problem is resolved.
Many thanks for the feedback
Regards
Chris

CHARM: Automatic assignement for IBase/Component in Change Request

Hi!
By creation of Change Request the value "IBase / Component" should be filled.
The default values here are: "0" and "0".
Has some one already customizng experience here?
I would like to change the value to e.g. "1" and "314" (my productive IBase).
Thank you very much!
regards
H. Thomasson

Hi Roel,
many thanks for your response. You talking about service desk issue.
Unfortunately we do not use service desk and create the change requests manually.
As I mentioned of great interest were the issue with customizing of layout and actions within Change requests and documents.
Here some examples:
automatic assignement of change manager to the change request
automatic assignement of Ibase to the change requests
Do you know the customizing procedure here (tcode, documentation) and can help?
Thank you in advance
H. Thomasson

Automatically assign a BP Grouping for a BP Role

Similar Messages

Maybe you are looking for