Background removed when loop point changed

I set up a menu with a number of animated video thumbnail buttons. All worked fine.
Then I changed the loop timing value and the background layer was filled with the background colour (black) instead of the still image that was there initially. Very repeatable 'feature'. And rather boring.
Has anyone else found this? Is this finger trouble on my part or something else?
Encore CS3.0.1.008
Win XP SP2, Core 2 Duo 2.8, 2Gb RAM, NVidia 8800GTX - all drivers up to date.

I hadn't noticed this before (due to my workflow with titles, multicam and timecode settings, I probably never would have either). But I can reproduce it on my system (PrPro CS5).
Interesting thing is, with my sequence, the start time is 18:00:00:00 so it just shows black video behind the title. However, if I scrub the timecode INSIDE the title designer window, then it updates to the proper frame and remains that way until I close the titler window. So that at least provides a temporary workaround, but it IS a bug (since the feature is not working as it was intended to work).
It would be feature request if it was for some operation or procedure that wasn't already in the intended code for the application. So again, in this case there is a workaround, but it is technically a bug since the "Show Background Video" and "Background Video Timecode" should match up. It's just that there's a piece of logic missing when the sequence zero point is NOT "0"

Similar Messages

When mouse pointer changes from arrow to cursor it starts to flicker

I am running Windows 7 on a Toshiba laptop (P500-ST5807).
When the mouse pointer changes from arrow to cursor it starts to flicker. The problem seemed to start after I clicked "hide pointer while typing". I tried unchecking "hide pointer while typing" but this did not correct the problem. I have also tried adjusting the touchpad settings to less sensitive -- this did not help either. I have searched the internet and all types of "cursor flicker" seems to be a common problem.
Would anyone have a simple solution?
Thanks in advance for your help,
yeto

Satellite P500-ST5807
Did you install the display driver posted in June?
nVidia Display Driver for Windows 7 64-bit
-Jerry

[svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

AS2 TextInput Background Color - Issues when trying to change dynamically

Hello,
I'm having issues changing a TextInput background color after the initial onLoad using AS2.
On load, I have no issues setting the background color with this code:
Code:
onClipEvent (load) {
    this.background = true;
    this.backgroundColor = 0x1E1C1C;
However, I have a form validator run when focus is lost but yet I cannot set the background color at that point. For example, I'm trying to set the background color to orange and text to white if the field's contents are invalid. Even something simple like this doesn't affect the colors.
Code:
on (focusOut) {
        this.backgroundColor = 0xFAA523;
        this.borderColor = 0xFAA523;
        this.borderStyle = "solid";
        this.color = 0xFFFFFF;
        this.text = 'Enter your first name';
All code is in actions for the TextInput itself.
Anyone know what I'm doing wrong?
Thanks in advance!

Actually, that's not the solution. You need to use setStyle to access the backgroundColor property when the TextInput is already generated.
This worked for me:
this.setStyle("backgroundColor",0x1E1C1C);

Removing Edited Images & Remembering Changes when importing back into the Lightroom

I'm looking for the following solution:
I would like to
1- edit raw or jpg files in lightroom,
2- remove the images from the lightroom library.
3- import them back when needed with changes and ratings, basically with all the changes being remembered.
How can I make import back the images, including the changes I made to them?
Please help & email me too if possible.
Thanks,
Alexander
photorama [at] gmail.com

Could you describe what you mean by removing images from the library? To some it means deleting from the database and trashing the actual image; to others it means removing the info and pointer to the file in LR but leaving the image in place; still others - possibly you- mean it to remove the images but leave the database and Previews.
 
 

 color="#600000" size="2">~~ John McWilliams
 
 
 
 MacBookPro 2 Ghz Intel Core Duo, G-5 Dual 1.8; Canon DSLRs

Whenever I enter a loop point, menu background disappears

I've tried all sorts of combinations of menu duration/hold forever/animate buttons with different time lengths..but no matter what, if I enter a time for Loop Point, the background of my menu disappears.
I got it working once by deleting the menu and redoing everything, but now that doesnt work. Please help! All I'm trying to do is have a chapter menu with each chapter showing a video preview about 5 seconds long. I'm using one of the standard menus provided by Encore.
Does anyone know how to get it to work properly?
I'm using Encore CS4

Maybe someone can educate both of us on this.
I don't recall where I formed the belief, but I generally do not mix a motion background and animate buttons. I use a still background with animate buttons. If I wanted to mix a motion background and animate buttons, I'd do it all in After Effects rather than using Encore for the animate buttons. (You can in fact mix a motion background and animate buttons in Encore, but it does odd things like the one you are describing.)
I believe the "loop point" refers to the motion background and not animate buttons alone. So when you set a loop point without a motion asset, you see black behind your buttons. You can work around this by making a video of your still menu background, and selecting that as your motion asset.
All I see in the help document regarding loop point is for motion menus.

Intensive slider control use may lead to LabVIEW hang and system instability when coupled to event loop "Value Change"

Occasionally, over the past year or two, I have noticed on different machines and versions of LabVIEW (8.0 and 8.5) that intensive operation of the LabVIEW slider control (holding down the left mouse button and shaking the mouse quickly back and forth to move the slider for several seconds) may cause LabVIEW to hang with high CPU usage (50% on my current test machine, which has a Pentium IV "hyperthreaded" processor, so 50% is the max that a single thread can take up). In some instances, after the LabVIEW process is forced to quit, the system itself becomes unstable (more high CPU usage) or hangs, up to and including the need for a hard restart. I have seen this behavior both when handling slider change events the "old fashioned" way with a while loop and a case structure; and also when using a while loop with an event structure handling the "Value Change" event for the slider.
Attached is an .rtf file dump of the front panel and block diagram of a simple test VI that replicates this problem in my hands (using an event structure). The loop count runs to at least several hundred iterations before the crash occurs.
At least for the "old fashioned" loop handling method, adding a forced wait of a few dozen msec per loop didn't seem to be a workaround. I haven't tried this idea with the event structure, but don't expect joy to follow. The possibility of a system hang discourages aggressive experimentation.
Is this a known issue? Can anyone else replicate it (carefully)? In any case, I'd welcome other suggestions for workarounds.
Thanks,
Darin Nelson
Attachments:
Hang Slider.rtf ‏683 KB

Thanks for all your responses, and especially to those who are waggling their mice around trying to reproduce this. I'll respond to (most aspects of) the last several posts in one message.
LabViewGuruWannabe:
I'll see if I can get the original code to post in a separate message, I posted the .rtf originally because I thought there might be filtering on forum posts (I'm sort of new here). But I doubt you re-created it wrong.
The "more modern" test hardware was an Intel Core2 , 2.4 GHz, 2Gb RAM, on an Intel 965 family motherboard. As I said, it took me two tries to trigger the error on this hardware; in the case where it triggered, I was at almost 12000 iterations before things went south. 10000 iterations, therefore, might not be enough--or you might never get it, for all I know. My Pentium 4 Hyperthreaded machine (3.2 GHz, 2 Gb RAM) triggers the hang much more easily (always within 2500 iterations, usually within 1000), so there seems to be some hardware dependence here. Maybe the workaround is just to use hardware recent enough that no one not under the influence of strange compulsions will accidentally trigger the hang.
TonP:
After reading your suggestion, I tried something even more radical -- getting rid of the handling code altogether. I took the slider node out of the while loop, and removed all code inside the "Slide" case of the event structure.
On my Pentium 4 machine, the hang triggered after 677 iterations.
Brian Beal:

Huh, I never even noticed that checkbox existed. Anyway, yes, I
kept the default to lock out the front panel while the event process. If I
disable it… I still get the hang.
Message Edited by dman on 02-04-2008 06:36 AM

Can I change the background color when I'm in a brochure layout?

can I change the background color when I'm in a brochure layout? I've tried making a box in desired color but cannot push it to the back(not an option, it's greyed out)

Then you are in a Layout template and the shape is already the back most object.
Peter

How to make main menu start at loop point when you link back to it?

I have a main menu with a an intro, after the intro I have put a loop point.
But when I link back to the main menu, it plays the whole intro.
How do I let the main menu start at the loop point when I target a button back to it?

Jake:
English is not my native language (I used Wikipedia to understand RTFM !!!).
I used to copy&paste some lines from the manuals when a post can be answered directly that way (why to write it again if it's well written there?).
This is my "last upgrade": I uploaded some captured images from the manual to use easier in this kind of frequent questions. I like to show that the information was right there in the manual . . . but I really find the expression RTFM a little hard !
;D
Alberto

Lightroom 5 Help says that to change the size of filmstrip thumbnails: "Place pointer over top edge of filmstrip; when pointer changes to doublearrow, drag the filmstrip edge up or down." However I never get a double arrow. Instead I get a hand icon tha

Lightroom 5 Help says that to change the size of filmstrip thumbnails: "Place pointer over top edge of filmstrip; when pointer changes to doublearrow, drag the filmstrip edge up or down." However I never get a double arrow. Instead I get a hand icon that allows me to drag the thumbnails to right or left. How can I change the filmstrip thumbnail size?

It works for me. Are you sure you are hovering in the right spot? It's the dividing line between the filmstrip and the Toolbar.

Any pointer to look into, when buyers cannot change the payment terms

Any pointer to look into, when buyers cannot change the payment terms on the POs due to the error u201CExpected/Overall value should be equal or greater than invoiced amountu201D
A thought process to look around, to investage this issue is appreciated.
Thx/RICK

Rick,
this message may be due to the user trying to change a Purchase order item payment terms when there is already a blocked supplier invoice registered for the item. The vendor invoice payment terms normally override the PO payment terms. Users sometimes think they can speed up payment to a vendor by changing the payment terms on the PO. This can only be done before an invoice is registered and the PO term can be overridden at invoice entry time in any case.
Have a look at the terms on any associated invoice and the vendor record for the Purch org.
You may also want to have a look at your business process for blocked invoice resolution.
If the user wishes to speed up payment of an invoice they need to contact the users who are responsible for the vendor payments. We call them AP staff in our org - stands for Accounts Payable.
Hope this helps
Allen

HT201260 Tried to remove Symantec End Point software by dropping it in the trash and then emptied trash, of course now when I try and install newer version it tells me to uninstall the older version I can not access now. Any solutions?

Tried to remove Symantec End Point software by dropping it in the trash and then emptied trash, of course now when I try and install newer version it tells me to uninstall the older version I can not access now. Any solutions?

You usually have to use the program's uninstaller utility for such things as Symantec. Read this:
http://www.symantec.com/business/support/index?page=content&id=TECH132120
You may need to install it all over again, just to use its uninstaller.

I recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

i recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column two drives plus possibly a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install. http://support.apple.com/kb/PH18869?viewlocale=en_US

SQVI in a loop when creating or changing table join

Hello collegues,
When creating or changing a table join in the sqvi-transaction the transaction is hanging and won't continue. So I can't create any table joins anymore in the system (dev, qas and production-system).
Earlier I could create and change them without any problems.
Can anyone help me solving this problem?
Kind regards and thanks in advance,
Bart

Hi Kamal
You could try the following:
- for the particular workflow that you are using, find the task that is responsible and then edit the description tab.
For debugging please go to transaction SE24 and set a breakpoint in CL_BBP_ACTION_NOTIFICATION_WF.
I hope this helps,
Kind Regards,
Lisa

Error message at loop point of main menu...

Anyone ever get this message when building a DVD?
http://www.reflexive-cinematics.com/miscimages/errormessage.jpg
I keep getting this damn messages with Every adobe application. I was having tons of issues with encore 1.0 so I upgraded and bought 2.0. Now I'm having that error message.
Does anyone know what the problem is? And by the way, I only get that message on the main menu when it tries to loop. The menu background video is 1:00:00 ( one minute ) and the loop point is 00:07:00 ( seven seconds ) with loop amount set to forever. I've changed it to other stuff to see, but I still get the message.
I am able to burn the disc and everything works, except for the loop point at the main menu. The menu plays till it's duration and then instead of looping it ( in a DVD player ) just stops playback and ( during preview on my computer ) gives that above error message.... ' an abnormal condition has been detected. '
fyi - my computer stats are this, in case anyone was needing to know:
Pentium Prescott P4 3.0gHz
2.5 GB's of DDR SDRAM
nVidia Geforce FX5200 128MB vid card
Creative sound blaster audigy ( with live drive )
380 gig's of Hard Drive space

Well nevermind. I seem to have fixed it. I just had to build a new project and re link everything. Seems that maybe the original project got all gunked up or something. It's working fine now.

Background removed when loop point changed

Similar Messages

Maybe you are looking for