BI publisher report not refreshing when associated OBI EE report is changed
We have a dashboard that has an OBI report at the top, and a linked BI Publisher report underneath. The BI Publisher report is supposed to reflect a template version of the results in the OBI report.
On the initial load of the report, the two reports are synched and matching. However, when you change a prompt with a request variable for the OBI report, the BI publisher report either blanks out or shows the prior information which no longer matches. If I change defaults in the OBI EE report, resave, then reload, the BI Publisher always gets it right the first time, just never again after that.
Since all my research to this point led to a caching issue, here are the report properties that matter(?):
Report properties:
Caching –
Enable Data Caching = unchecked
User Level = checked
Document Caching = unchecked
User Can Refresh Report Data = checked
General -
Run Report Online = checked
Show Controls = checked
Allow Sharing Report Links = checked
Open Links in New Window = checked
Asynchronous Mode = unchecked
Auto Run = checked
Also – how do you make PDF the default output for a BI Publisher report? When we load this dashboard, it always tries to run the RTF version, and we have to Cancel, choose PDF and then refresh to get the PDF version.
when you change a prompt with a request variable for the OBI reportUse Presentation Variable instead of Request Variable. Make sure you keep the same name for both Parameter in the BIP report and Presentation Variable in BI.
If helps mark
~
http://cool-bi.com
Similar Messages
-
SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.
SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari -
Image does not refresh when I undo
This seems only to happen when using my Wacom. A lot of friends have the same problem.
The viewport/canvas does not refresh when undoing a paint stroke done with my Wacom Intuos4 Wireless. But when I make a new paint stroke or zoom in or something else that requires the viewport to refresh it looks correct. I am using Photoshop CS5.1 (Production Premium CS5.5). I am running Mac OS X Lion on a MacBook Pro 13" 2011.
Anyone else having this issue? It seems like a nasty bug to me.OK, I have done some testing and this happens on three friends computers. What we have in common is Wacom Tablets (different kinds, intous3, intuos4, bamboo and intuos4wl), Photoshop CS5.5, OS X Lion and Macbook 13" 2011.
However, another friend just bought a new intuos4wl for his Macbook Pro 15" late 2008 (MacBook Pro5,1) thats running Snow Leopard. So far this seems to only happen with wacoms + cs5.5 + lion. And another friend is running CS5 on a MacBook Pro 13" 2011 without problems.
I would say that the problem is PS CS5.1 in conjunction with Lion and Wacom tablets. Scratch what I said earlier about external monitors. -
After installing Exchange 2010 SP3 RU3, I had an issue in Public Folders, once having group by categories in Outlook, the Group of "(None)" categories is not refreshing when changing flag... I also installed RU4 but nothing changed, any reason
ThxHi,
From your description, the group with none categories won’t fresh when changing flag in Category view. If I misunderstood, please point it out.
As you can in the View tab as below, there is Category as well as Flag: Start date or Due Date. It means that grouping per color categories is more or less different from that
grouping by flag.
Should you need more assistance, feel free to tell me.
Regards,
Rebecca Tu
TechNet Community Support -
Report does not refresh when link to page
I have a report on page 1 with a column link to a report on page 2.
The link sets items on page 2.
If I use the 'Page in this Application' from the column link, the items on page 2 are set and the report is automatically refreshed.
If I use the 'URL' in the column link, the items are set but the report on page 2 is not refreshed. I have more than 3 items to pass via the link so I have to use the URL. The url syntax is correct - if I click a Go button on page 2 the data refreshes fine.
I have the same problem when clicking a tab that I have set to clear the page items - the tab clears the cache on the target page but the data in the report is not refreshed until I click the go button.
The items on page 2 are select lists and text (always submit when enter pressed).
How can I get the report on page 2 to auto refresh without the user having to click the Go button?
Message was edited by: kgamble
kgambleI can't post the pages (site reasons) but here's the debug.
All the item values are set correctly to what I want but at point 041 - I get the custom "no rows returned error". If I click the refresh button (essentially a submit with go) the date appears.
I am now using the link set up to go to 'Page in Application' with clear cache and 3 item variables set and reset pagination ticked and the request of Go (its the same result without the request and the pagination unticked).
Any ideas?
Thanks
Kathryn
0.00:
0.00: S H O W: application="129" page="8" workspace="" request="Go" session="8392008407576157812"
0.02: Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-gb
0.02: alter session set nls_language="ENGLISH"
0.02: alter session set nls_territory="UNITED KINGDOM"
0.02: NLS: CSV charset=WE8MSWIN1252
0.02: ...NLS: Set Decimal separator="."
0.02: ...NLS: Set NLS Group separator=","
0.02: ...NLS: Set date format="DD-MON-RR"
0.02: ...Setting session time_zone to dbtimezone
0.02: NLS: Language=en-gb
0.02: Application 129, Authentication: CUSTOM2, Page Template: 3508132500492586
0.03: ...Supplied session ID can be used
0.03: ...Application session: 8392008407576157812, user=PENTESTER
0.03: ...Determine if user "KGAMBLE" workspace "1728921676563485" can develop application "129" in workspace "1728921676563485"
0.03: Session: Fetch session header information
0.03: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.05: ...Session State: Save "P8_IDR" - saving same value: "Y"
0.05: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.05: ...Session State: Save "P8_STATUS" - saving same value: "Outstanding"
0.05: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.05: ...Session State: Save "P8_SECTION" - saving same value: "P"
0.05: ...Metadata: Fetch page attributes for application 129, page 8
0.05: Fetch session state from database
0.05: Branch point: BEFORE_HEADER
0.05: Fetch application meta data
0.05: Authorization Check: "4732024931692101" User: "PENTESTER" Component: "PAGE"
0.06: Clear cache: request=RP
0.06: ...Resetting pagination for page
0.06: Clear cache: request=8
0.06: ...Clearing Cache for Page 8
0.06: Nulling cache for application "129" page: 8
0.08: Saving g_arg_names=P8_IDR and g_arg_values=Y
0.08: ...Session State: Saved Item "P8_IDR" New Value="Y"
0.08: Saving g_arg_names=P8_STATUS and g_arg_values=Outstanding
0.08: ...Session State: Saved Item "P8_STATUS" New Value="Outstanding"
0.08: Saving g_arg_names=P8_SECTION and g_arg_values=P
0.08: ...Session State: Saved Item "P8_SECTION" New Value="P"
0.08: Computation point: BEFORE_HEADER
0.08: Processing point: BEFORE_HEADER
0.09: Show page template header
0.09: Computation point: AFTER_HEADER
0.09: Processing point: AFTER_HEADER
0.11: Authorization Check: "4732329087693375" User: "PENTESTER" Component: "parenttab"
0.13: Authorization Check: "6131220670151932" User: "PENTESTER" Component: "parenttab"
Home New Complaint
Existing Data
Logout |
Complaints Complainants
0.14: Region: Complainant Search
Complainant Search
0.14: Item: P8_SD_SEARCH TEXT_WITH_ENTER_SUBMIT
SD Number
0.16: Item: P8_SURNAME COMBOBOX Complainant -- All -- ARDVARK ARMSTRONG BAKER BLOGGS CHICKEN HARPER HILL JONES PERRY REAPER ROBINSON SHERMAN SMITH T WATSON
0.16: Item: P8_NI_SEARCH TEXT_WITH_ENTER_SUBMIT
NI Number
0.16: Region: criteria_go
0.16: Item: P8_GO BUTTON
0.17: Item: P8_ROWS COMBOBOX Number of complaints per page 10 15 20 30 50 100 200 500 1000 5000
0.17: Region: Complaint Search
Complaint Search
The list of complaints must match ALL of these specified search criteria:
0.19: Item: P8_START PICK_DATE_DD_MON_YYYY
Start
0.19: Item: P8_END PICK_DATE_DD_MON_YYYY
End
0.20: Authorization Check: "4733005669696056" User: "PENTESTER" Component: ""
0.20: Item: P8_TARGET COMBOBOX
Target -- All -- Acknowledgement In Target Acknowledgement Target not Met Acknowledgement Pending Final Response In Target Final Response Target not Met Final Response Pending
0.22: Item: P8_RECUR COMBOBOX
Recurrent? -- All -- YES NO
0.22: Item: P8_PAY_E COMBOBOX Ex Gratia/Interest
Payments -- Select -- YES NO
0.23: Item: P8_IDR COMBOBOX
Type of Complaint -- All -- IDR Other Complaint
0.23: Item: P8_STATUS COMBOBOX Status -- All -- Outstanding Completed 01-Jan-2007 05-Feb-2007 05-Mar-2007 12-Feb-2007 12-Mar-2007 15-Jan-2007 22-Jan-2007 26-Feb-2007 29-Jan-2007
0.23: Computation point: BEFORE_BOX_BODY
0.23: Processing point: BEFORE_BOX_BODY
0.25: Region: Complaints List
Complaints List
0.25: show report
0.28: Authorization Check: "4733005669696056" User: "PENTESTER" Component: "COLUMN"
0.28: determine column headings
0.28: activate sort
0.38: parse query as: GENERAL1
0.38: binding: ":P8_NI_SEARCH"="P8_NI_SEARCH" value=""
0.39: binding: ":P8_SD_SEARCH"="P8_SD_SEARCH" value=""
0.39: binding: ":P8_SURNAME"="P8_SURNAME" value="AA"
0.39: binding: ":P8_START"="P8_START" value=""
0.39: binding: ":P8_END"="P8_END" value=""
0.39: binding: ":P8_SECTION"="P8_SECTION" value="P"
0.39: binding: ":P8_STATUS"="P8_STATUS" value="Outstanding"
0.39: binding: ":P8_TARGET"="P8_TARGET" value=""
0.39: binding: ":P8_IDR"="P8_IDR" value="Y"
0.39: binding: ":P8_RECUR"="P8_RECUR" value="AA"
0.39: binding: ":P8_PAY_E"="P8_PAY_E" value="X"
0.41: print column headings
0.41: rows loop: 15 row(s)
There are no complaints matching the criteria. Please double check all the criteria in the boxes above.
0.42: Computation point: AFTER_BOX_BODY
0.42: Processing point: AFTER_BOX_BODY -
Adobe Captivate 8.1 TOC not refreshing when published
I have Adobe Captivate v8.1. In my project, which originated in PPTX, the slides are not refreshing in the TOC in Captivate. I have used the 'reset' button in TOC but when I publish, it is not picking up the slide title?
thanks LynnPowerPoint is not the best about managing slide titles. Unless you created the content in outline mode, or laboriously added titles to each slide in outline mode, you may find that what appears to be a slide title in PowerPoint is not recognized as a slide title by Captivate.
The good new is, once you add the titles (either in Captivate or in PowerPoint), you should be able to see them in the TOC after refreshing it.
Just be aware, you'll loose any customization to the TOC contents when you refresh. -
Crystal Report Not Refreshing in browser
Hi all,
Am using crystal report for my web application so here am passing my parameter from jsp page
but it is not refreshing
For example
I am select Month=jan my query goes this way.
Select * from employee where month='jan' group by department order by designation
when am intially design in eclipse in filter option am selecting 'jan' and when am running in browser am passing the same query with the parameter but here instead of 'jan' am passing month variable where my month variable changes every time according to user choose
my crystal report is not getting refreshed ..
hope u understood my problem
Regards
Vanishree.BHi Tejomay ,
I have tried that even after calling refresh() , it ;s not getting refreshed..but if am using signal table in my query it is getting refreshed .but when am grouping with another table it is not refreshing..
Regards
Vanishree -
WebI report not refreshed after BW pwd change - SAP EP-KM asPoint of entry
Config:
BOXI3.1 SP3 FP3
INTG. KIT SP3 FP3
BW 7.01 SP5
SAP EP 6.0
Imported all transports
Configured BW Publisher
Configured SAP Authentication in CMC
Imported required roles in CMC
Imported KM Par file in Portal
Issue:
Users logon to EP with SAP BW credentials and clicks on a webi report within KM with Infoview structure -> report is executed and can be refreshed successfully.
User forgets his pwd and the security team reset his pwd
User logon to SAP EP with reset initial pwd and gets a prompt to enter new pwd -> new pwd chosen and logon successful -> clicks on a report within KM with Infoview structure -> report pops up but can not be refreshed as an error msg below pops up
A database error occured.
The database error text is: Unable to connect to SAP BW server Name or password is incorrect (repeat logon). (WIS 10901)
Temporary solution:
Logon to Infoview directly and login with SAP account -> report executed and refreshed successfully -> Logout
Then go back to EP to execute report and since then works fine but issue occurs again if pwd is changed and logon to Infoview directly process have to be done to move on.
Has anybody had these issues or have an idea what config might be missing?
Please note that SNC was not configured as we are not using AD for logon or report bursting for now. All docs read have specified that SNC is not required for my scenario.
Also certificates have been established btw BW and EP and SSO works well with BEX queries deployed thru EP.
Any ideas will be appreciated.
Thanks,
NoritaMore info -
If I clear the error msg and continue to click on refresh values in prompt screen multiple times then the bw account gets locked in SAP BW backend.
Please note that the universe was created to use SSO authentication and no user credentials hardcoded.
FQDN are also used for all the configs.
Has anybody encountered these issues before? Please let me know if you have any ideas or pointers.
Thanks,
Norita -
Splitter Problem - ALV Grid not refreshed when selected another item
Hi Experts!!
I have a container on screen 100 which has to be split into 3 areas. Left area ->tree, Right top area -alv grid and bottom also alv grid. I created the program without splitter and it was working fine. After I added this splitter, I see that in ALV grid, the data is not being refreshed. When double clicked on an item in tree struct, ALV grid (CL_SALV_TABLE) to be shown.. Firstly it's fine but when I double click on another item, it's not refreshing the data but is showing the same previous data.
I have searched existing posts and implemented, but no luck.
PFB my code:
* In PBO of screen 100
CREATE OBJECT go_cc_area1
EXPORTING
container_name = 'CC_AREA1'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE e025 WITH sy-subrc.
ENDIF.
CREATE OBJECT go_splitter
EXPORTING
parent = go_cc_area1
orientation = 1 "Vertical split
sash_position = 40
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
ENDIF.
go_container_tree = go_splitter->top_left_container.
go_container_2 = go_splitter->bottom_right_container.
CREATE OBJECT go_splitter_2
EXPORTING
parent = go_container_2
orientation = 0 "Horizontal split
sash_position = 40
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
ENDIF.
go_cc_area2 = go_splitter_2->top_left_container.
go_cc_area3 = go_splitter_2->bottom_right_container.
CREATE OBJECT go_tree
EXPORTING
i_parent = go_container_tree
i_node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
i_item_selection = gc_x
i_no_html_header = gc_x
i_no_toolbar = space
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
i_background_id = space
is_layout = gs_layout
CHANGING
it_sort = gt_sort
it_outtab = gt_tree_output
it_fieldcatalog = gt_fieldcat_tree.
CALL METHOD go_tree->expand_tree
EXPORTING
i_level = 2.
* End - PBO 100
* CLASS lcl_tree_event_receiver DEFINITION
CLASS lcl_tree_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS: handle_item_double_click
FOR EVENT item_double_click OF cl_gui_alv_tree_simple
IMPORTING fieldname
index_outtab
grouplevel.
ENDCLASS. "lcl_tree_event_receiver DEFINITION
* CLASS lcl_tree_event_receiver IMPLEMENTATION
CLASS lcl_tree_event_receiver IMPLEMENTATION.
METHOD handle_item_double_click.
IF go_alv_area2 IS BOUND.
go_alv_area2->refresh( ).
ENDIF.
cl_salv_table=>factory(
EXPORTING
list_display = space
r_container = go_cc_area2
IMPORTING
r_salv_table = go_alv_area2
CHANGING
t_table = gt_table ).
go_alv_area2->display( ).
ENDMETHOD. "handle_item_double_click
ENDCLASS. "lcl_tree_event_receiver IMPLEMENTATION
I am facing the same problem with area 3 as well. Can somebody please help me out.
Thanks a lot!!
Edited by: Srinivas Kalluri on Jan 28, 2012 1:39 PMHi All,
I am still facing this problem. Can somebody please help me out?
I created a test program wth sflight and spfli tables. Can somebody look into this and tell me where I am going wrong?
On screen 100 i have one cust container named CC.
When I test it, it's showing the same refresh problem. But in this test program refresh is atleast happening once.
REPORT ztest.
PARAMETERS: p_carrid TYPE sflight-carrid.
CLASS lcl_tree_event_receiver DEFINITION DEFERRED.
CONSTANTS: gc_x VALUE 'X'.
DATA: go_cc_area1 TYPE REF TO cl_gui_custom_container,
go_tree TYPE REF TO cl_gui_alv_tree_simple,
go_tree_event_receiver TYPE REF TO lcl_tree_event_receiver,
go_cc_area2 TYPE REF TO cl_gui_container,
go_alv_area2 TYPE REF TO cl_salv_table,
go_cc_area3 TYPE REF TO cl_gui_container,
go_columns TYPE REF TO cl_salv_columns_table,
go_cc_editor TYPE REF TO cl_gui_custom_container,
go_editor TYPE REF TO cl_gui_textedit,
go_content TYPE REF TO cl_salv_form_element,
go_container_tree TYPE REF TO cl_gui_container,
go_container_2 TYPE REF TO cl_gui_container,
go_splitter TYPE REF TO cl_gui_easy_splitter_container,
go_splitter_2 TYPE REF TO cl_gui_easy_splitter_container,
go_cc_comp TYPE REF TO cl_gui_custom_container,
go_alv_comp TYPE REF TO cl_salv_table.
DATA: gt_sflight TYPE TABLE OF sflight,
gt_data TYPE TABLE OF spfli,
gt_fieldcat TYPE lvc_t_fcat,
gt_sort TYPE lvc_t_sort,
gs_sflight TYPE sflight,
gs_layout TYPE lvc_s_layo.
* CLASS lcl_tree_event_receiver DEFINITION
CLASS lcl_tree_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS: handle_item_double_click
FOR EVENT item_double_click OF cl_gui_alv_tree_simple
IMPORTING fieldname
index_outtab
grouplevel.
ENDCLASS. "lcl_tree_event_receiver DEFINITION
* CLASS lcl_tree_event_receiver IMPLEMENTATION
CLASS lcl_tree_event_receiver IMPLEMENTATION.
METHOD handle_item_double_click.
READ TABLE gt_sflight INTO gs_sflight INDEX index_outtab.
IF sy-subrc EQ 0.
SELECT * FROM spfli INTO TABLE gt_data WHERE connid = gs_sflight-connid.
IF go_alv_area2 IS BOUND.
go_alv_area2->refresh( ).
cl_gui_cfw=>flush( ).
ENDIF.
cl_salv_table=>factory(
EXPORTING
r_container = go_cc_area2
IMPORTING
r_salv_table = go_alv_area2
CHANGING
t_table = gt_data ).
go_alv_area2->display( ).
ENDIF.
ENDMETHOD. "handle_item_double_click
ENDCLASS. "lcl_tree_event_receiver IMPLEMENTATION
START-OF-SELECTION.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
* SET TITLEBAR 'xxx'.
CREATE OBJECT go_cc_area1
EXPORTING
container_name = 'CC'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e01.
ENDIF.
CREATE OBJECT go_splitter
EXPORTING
parent = go_cc_area1
orientation = 1 "Vertical split
sash_position = 25
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e02.
ENDIF.
go_container_tree = go_splitter->top_left_container.
go_container_2 = go_splitter->bottom_right_container.
CREATE OBJECT go_splitter_2
EXPORTING
parent = go_container_2
orientation = 0 "Horizontal split
sash_position = 40
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e02.
ENDIF.
go_cc_area2 = go_splitter_2->top_left_container.
CREATE OBJECT go_tree
EXPORTING
i_parent = go_container_tree
i_node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
i_item_selection = gc_x
i_no_html_header = gc_x
i_no_toolbar = space
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e03.
ENDIF.
SELECT * FROM sflight INTO TABLE gt_sflight WHERE carrid EQ p_carrid.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
i_bypassing_buffer = gc_x
CHANGING
ct_fieldcat = gt_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE e025 WITH sy-subrc text-e05.
ENDIF.
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
LOOP AT gt_fieldcat INTO ls_fieldcatalog.
ls_fieldcatalog-col_opt = gc_x.
CASE ls_fieldcatalog-fieldname.
WHEN 'CARRID'.
ls_fieldcatalog-no_out = gc_x.
WHEN 'CONNID'.
ls_fieldcatalog-no_out = gc_x.
ENDCASE.
MODIFY gt_fieldcat FROM ls_fieldcatalog.
CLEAR ls_fieldcatalog.
ENDLOOP.
DATA: ls_sort TYPE lvc_s_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'CARRID'.
ls_sort-up = gc_x.
APPEND ls_sort TO gt_sort.
ls_sort-spos = 2.
ls_sort-fieldname = 'CONNID'.
ls_sort-up = gc_x.
APPEND ls_sort TO gt_sort.
DATA: lt_events TYPE cntl_simple_events,
lo_l_event TYPE cntl_simple_event.
lo_l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_item_double_click.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_button_click.
APPEND lo_l_event TO lt_events.
lo_l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
APPEND lo_l_event TO lt_events.
CALL METHOD go_tree->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
* Set Handler
CREATE OBJECT go_tree_event_receiver.
SET HANDLER go_tree_event_receiver->handle_item_double_click FOR go_tree.
CALL METHOD go_tree->set_table_for_first_display
EXPORTING
i_background_id = space
is_layout = gs_layout
CHANGING
it_sort = gt_sort
it_outtab = gt_sflight
it_fieldcatalog = gt_fieldcat.
CALL METHOD go_tree->expand_tree
EXPORTING
i_level = 2.
IF NOT gt_sflight[] IS INITIAL.
CALL METHOD go_tree->set_top_node
EXPORTING
i_index_outtab = 0.
ENDIF.
* Send data to frontend.
CALL METHOD go_tree->frontend_update.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Edited by: Srinivas Kalluri on Jan 31, 2012 4:49 PM -
Write back report not refreshing
Hi,
I have created two simple 11.1.1.6 analysis and put them on a dashboard. The first enables the user to enter some commentary into a text box and save the entered text to the database. The second is a simple report on these comments, this report does not show all the new comments entered even when I refresh the analysis. Is there a parameter or config item I need to set to get a report to refresh in real time?1) Disable cache on that table
2) Delete presentation services cache or you can try 'bypass prs server cache' option
3) Delete your browser cache. also log out and log in again. -
Crystal Report not working when posting the report to the Crystal Server.
Hi All,
I created a report using Crystal Reports 2008 with two ODBC connections (User DSN's). When I run the report in Crystal Reports (where I originally created it) it runs fine with no problems.
I am now trying to load it on Crystal Server 2008. When I try to run this report in InfoView, I get a message: "Error Failed to open the connection." I am thinking that it has to do with the ODBC connections but I am not quite sure. Could someone lead me in the right direction? How will the report that I now saved in the repository on the server connect to the ODBC stream?
Thank you in advance.Solved my problem. I had to tweak the ODBC drivers on the server.
-
Prompts are not working when we call another report from the narrative view
Hi,
In my dashboard i need a table view report which should have scrolling option only for that section.
For this i added a html tag <iframe ........scrolling="yes"> in the narrative view and i added that narrative view in the report.
Now,it works fine in the dashboard.
But when i apply prompts in the dashboard the values are not filtering even though i added the "is prompted" filter condition in the criteria of both narrative view section and the called function.
Any help would be greatly appriciated.
Thanks,
chinna.Hi,
since you have created an iframe dashboard prompt wont work on that report.Same is the case if you put the report in Embeded content.
One possible workaround is to creaate a dummy report having columns same as that of dashboard prompt.Put all the columns is prmompted in this report
(No need to create dummy report if you already have those columns in some other report,You can use that report also)
Then go to your Iframe report and use "filter based on other request".In this way dashboard prompt will filter dummy report and based on dummy report values your iframe report will also filter.
Thanks
Sandeep -
Swing problem: table is not refreshed when i open it from jdialog
Hi , my situation is this one :
1. i have a swing form.
2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed.
3. i invoke this panel into the form with drag and drop, with invoke jDialog from button option.
4. First time i run the form and open the panel from button the drop down list and the table are working correctly.
5. i close the panel and open it again: And at this time when i choose an item from drop down list the table is not refreshed anymore. I have to run the form again if i want that this panel to work correctly.
Am i doing smth wrong? I dont have too much experience in swing , and the documentation for adf-swign are really poor .
Ps: Maybe i should explain the way i have created the drop down list and table in the panel . i am not using smth like execute with parameters for the view in the table. I have created a link between the view in the drop down list and the view in the table. It seems they work correcly if i run the panel for the first time.
Thanks in advance !To answer your question, Restore the iPhone with current iTunes on your computer. If fixed, it was software. If still problem, most likely hardware, and then make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
Classic Report not retrieving when accessing the first time
I have two classic reports on two separate tabs and the first time that I access the tabs, the report does not retrieve. However, if I tab off and then back onto the tab, the report will retrieve.
Any idea why these two tabs are not retrieving when initially accessing the tab?
I have several other tabs in the same application that retrieve properly when initially access them.
Thanks,I think I remember something like that happening to me because there were variables that were not initialized properly that the report used.
-
JPanel do not refresh when minimizing or moving JApplet
I�m using a JApplet that contains a JTree,some buttons and 3 JPanels. The 3 panels have the same size and are placed in the same place. So, 2 panels have the setVisible(false) and one setVisible(true), and depending on the situation, I change the panel I want to show. The problem is that in the appletviewer, when I move the applet, I minimize it or I put a window in front of it, the JPanel visible (all of them contain JTextFields, JTextAreas, JCombos ...) does not refresh and I cannot see the components inside the panel. This doesn�t happen with the JTree and the buttons.
Any help ? Thanks !I think I got the solution. First you have to add the panel to the frame :
this.getContentPane().add(panel, new XYConstraints(240, 112, -1, 484));
and then add the elements to the panel.
If you first add the elements and then the panel to the frame, the elements inside the panel are not refreshed (they dissapear) if you minimize or move the window.
Maybe you are looking for
-
Syncing iPod after restoring computer
I recently had to restore my computer and when I did that, I lost all my music, except what was on my iPod. I hooked it up to my computer only to have it not show up in My Computer, but it will show up in iTunes, except when I go to try and look at i
-
I can access the EM 12c with the ssl address https://server:7799/em but I would like to use the non-ssl side of it... I can access http://server:7788 and get the welcome index page.. but if I use http://server:7788/em I get Error 403 Forbidden...
-
Digital Video format for iMovie and iMac in general
I recently purchased a video capture product for my pc to digitize all the analog videos from when my kids were younger. The capture works great but, when I move it to the Mac (10.6.2), I'm told that the files (avi etc) can't be played. Is the proble
-
9800 won't start after downloading FourSquare app
Earlier in the year I downloaded the FourSquare app from BlackberryWorld, my screen froze, I did a soft reset and the phone never worked again - only got so far in restarting and when white line was about 1cm from the end it would restart again. Las
-
Spotlight search HTML pages SMB mount
Hey everyone, I have been having some trouble getting spotlight to show results for certain searches. I have several machines connected with SMB that I would love to search through. I tried to search for the string "founded in 1975" in one of these v