Billibg document type controling fields

Hi All
In billing document type controlling fields one field which indicates "credit memo w/val dat".
what is the importence of this field!
Regards
raj

hi,
Credit memo with value date
     If the field "Credit memo with value date" is set, the reference billing document is not settled and the payment deadline date for the base billing document comes after the billing date for the credit memo, then  field VALDT (fixed value date) in the credit memo request is filled with the payment deadline baseline date of the base billing document.
     This does not happen if the payment deadline date of the reference billing document comes before the current billing date of the credit memo.
This is from the documentation on the field.
Rgds,
Rags.

Similar Messages

  • Document type description field

    Hi Gurus,
    While defining the New Document Type in customisation,In Doc. type desc field it allows me to enter only  20characters.
    Is there any settings to be done to allow more than 20characters.
    If yes pls let me know..
    Bhanu

    Dear Bhanu Prakash
    There is no facility to provide long test for the description ti Document Type in Customizing.
    by logic its just a short Description of Doc Type.So why a long test is required?
    So if you mean short description then there is no point in giving Long description.
    Yes but when you are creating a DIR ( Document) you can give long description to the document number
    as this is must required to as per Business Process Requirement.
    If anwer is Usefull Please grant me the points.
    With Warm Regards
    Mangesh Pande

  • Document type control

    hi
    in my company i have two prequisitons
    one is used for imports and one for domestic .Ineed to make the field account asignment category an mandatory field for the domestic purchase requisition and for imports i do not how can i do this
    and
    can u also specify how this can be done to a purchase order also
    With regards
    chaitanya

    You can make account assignment category mandatory in configuration. The path in SPRO is <i>Materials Management --> Purchasing --> Purchase Requisition --> Define Screen Layout at Document Level</i>.
    Remember to make it mandatory in the field selection key at Document Type level. In case the field selection key is same at the document type level, change the field selection key in the document type definition (under <i>Define Document Types</i>). This way you can have different field selections at the document type level.
    Same way in Purchase Order also. Menu path in SPRO is <i>Materials Management --> Purchasing --> Purchase Order --> Define Screen Layout at Document Level</i>
    Hope this helps.
    Lakshman

  • ME21N Document type wise Field selection

    While creating the PO, in ME21N screen, i am have 5 different document types for Document type ZNB3 i want to make Account assignment category as mandatory and also the enduser have to select K(Compulsary).
    Is it possible to set acc *** category K as default for ZNB3 document type..or otherwise this field should be made mandatory only for this ZNB3 Document type
    Pls Guide me..

    Yes. It is possible.
    First make the Acc ***. category as mandatory field in SPRO->MM->PUR->Purchase Order->Define Screen Layout at Document Level.
    Please note that, for Standard PO field selection key is NBF which is set id Doc type level in SPRO->MM->PUR->Purchase Order->Define Document Types. In your case, create a new field Selection key and assign it in the doc. type.
    If you want to default the value as K, just assign K in ME21N Personal Settings.
    If you want to restrict only K, configure Allowed combinations for Acc. ***. category and item category in OMG0

  • Document type controll with respect to plant

    Hi,
    I have created two document type NB & ZB for purchase requisition , my requirement is whenever i select plant 1 in item level it should select N document type and for plant 2 ZB doc type, if  end user select wrong document type for plant for ex: ZB for plant 1 system should give  error message.
                                                                                    thnx.

    You have to use ,user exist for that take help of your abaper

  • Define new Layout for PO document type

    Dear Experts ,
    Where can we define the layout like SRV etc to be assigned in PO document type ?
    Regards
    Anis

    Hi,
    Purchasing screen field selection is controlled by the linkage between Document type and Field selection key assigned to that Document type e.g. for NB its NBF so if you want a choose the Fields as per your records then try
    SPRO => MM => Purchasing => define field selection groups for purchasing...
    here you can maintain your fields Suppressed, mandatory or optional...
    Try at your end
    Regards,
    Ninad Kshirsagar

  • Default Layout by PR Document Type

    I am trying to define different layouts based on different PR document types.  I noticed there are two fields when defining a new document type.
    Field Selection
    Layout
    I have been able to use the Field Selection option to control what is available on the screen, but not the sequence the fields are in. I am not sure how the Layout field is suppose to work, but I entered the Variant I created on ME51N, but it didn't work.
    Any help or clarification on the Layout field would be much appreciated.

    Bradley E...you had asked in one of your post about the purpose of the layout field on field selection.  Did you ever get an answer on this?  We have a value of SRV in that field and I'm wondering what it means (and what will happen if I remove it.)  I'm trying to figure out why our validity dates aren't coming up anymore on framework PRs and I think it might have to do with this layout field.
    Thanks!

  • Document Type at Company Code Level

    Hi All,
    I need a clarification with reference to the Number Range for PO Document Type say for NB.
    I am having two company codes which uses different number range against the Document Type NB. As we know the Number Range is client dependent, we must create two document types NB and ZNB (ex) to get digfferent Number Range to be effective.
    I would like to know if any SAP Standard Solutions available without using two document types, controlling the Number Range with reference to Company Code.
    Can any one know how to do this?
    Thanks for the Help,
    Prakash

    Hi
    SAP does not have any standard functionality , but you can use the User exit / Enhancement
    MM06E003
    Number range and document number
    function exit - EXIT_SAPMM06E_001
    in this you can write the logic for derivation of number range based on the Compnay code.
    Maintain the Combintaion in a Z table. & derive the number range group from the table.
    This is a well used user exit,
    Thanks & Regards
    Kishore

  • PR?PO document types

    Hi
    What is the purpose behind creating new document types for PR/PO/contact ? as i understood
    1. u may need to define different document types for diff company codes according to client needs, to differentiate them better
    2. u can assign diff internal/external number groups to each document type , so that it will be easy for searching/auditing purposes
    3. this helps to take them through release strategy easily
    Is there any other benifits other than this??
    Regards
    NSB

    Hi,
    The main purpose of document types is to map the business scenario. This is achieved via Account Assignment Category, Item Category and also additional features like assigning different number ranges etc for easy distinction among document type.
    A document type controls which Account Assignment Categories and Item Categories are allowed which in turn controls whether for a particular document type GR is allowed or not (Blanket Orders, GR is not permissible), GR based IV is mandatory or not (Subcontracting scenario), GR is valuated or not (Consignment), Cost Center & GL A/c is mandatory or not, IV is possible or not (Consignment not possible, system generates Invoice) etc and many more.
    Hope this helps you.
    cheers
    Yogi

  • Alternate document type for MRP requisition

    Our purchase scenario is that all MRP purchased items must have an approved contract to move to a purchase order.  In 95% of the cases, this will be true, but there will be that 5% that, due to expiration of the contract or quantity/value exceeded, a valid, approved contract will not be available.  However, the purchase must still proceed.
    Our thought is to create an alternate requisition type that the buyer could change the MRP requisition document to.  This new document type would then be subject to requisition release strategy.
    However, using an MRP generated requisition (creation indicator B), the document does not allow change of the document type.  The new document type is a complete copy of the NB document type used in MRP proposal planning, including the number range.  The only difference is that the new document type is subject to requisition release.
    Changing the document type at the MRP group level won't solve the problem as very few materials will actually require this change.  It would be temporary until the existing contract could be extended and approved or a new one created and approved.  Also, it seems that the MRP group setting affects only the purchase order and not the requisition.
    Is there a way for us to make this process work more smoothly than to have to copy the items from the NB document type to the alternate document type manually?

    Assuming you have a material master involved, why not try MRP Group in TCode OMDT.  You can assign the group to the material and that group can determine the PR type that is created.
    MRP:doc.type purchase requisitions for standard purchase ord
        Identifier allowing a distinction to be made between various kinds of
        purchase requisitions in the SAP system.
        By means of the document type you can, for instance, differentiate
        between a standard purchase requisition and a requisition relating to a
        stock transport order, although both documents belong to the purchasing
        document category "purchase requisition".
    Use
        Among other things, the document type controls number assignment and the
        selection of
    Regards

  • Document type FO to have same layout as NB

    Hi all,
    I need to activate framework orders and I need to ensure that document type FO has the same layout as NB. Please would you tell me how/where to do this?
    Also- do framework orders have a different number range compared to standard PO's?
    Thanks in advance.
    JJ

    Dear,
    Why you need  screen layout for Frame work order document type same as standard PO?
    The documnet type is created and is assigned to a screen layout as per the requirement e.g material group is madatory for document type FO and optional entry for document Type NB.If you will assign NBF screenlayout (standard) to FO order type it will behave as standard .
    Document type controls scrren lay out,no range,allowed item categories  and freference requisitions.you can assign same no range to more than one document type,But it is advisable to maintain different no-range for each document type.

  • Maintain Copy Control for Document Types.

    Hi Gurus,
    My Client has two customized documents both are order Types and wants to maintain Copy control between them.
    If i see VTAA i can find either New Entries option or copy option.
    When i go for new entries option it asks me Requirements and Routines which needs to be set for this copy control and i am not aware of those.
    The Other option is Copy as but since it's customized document types so i am not getting which document should i take as refernce for copying.
    Please suggest me how to proceed.
    Thanks in Advance!!!!

    Hi
    Ideally we don't gamble with standard settings. Not only in copy control but for all other settings related to document types, conditions, movement types etc etc. If standard settings or configuration has been deleted by human error then we should restore standard settings first. May be BASIS guy can do it and if it is not possible then open some other server where these settings are there and you should do all settings manually by copying the standard ones.
    Why we recommend to always copy standard settings and make necessary changes is that standard settings are done by SAP and they have tested it thoroughly and they have hundreds of consultants who have worked on these settings. Standard settings are reliable and we can copy them without any fear of mistake. Whereas if you copy some Z settings or create new one then there are more chances of some wrong or missing settings. Logically may be it sounds not that important or useful but technically it is really fruitful to do this.
    In standard settings system copies all subsequent settings and you don't need to do those settings again and you are already aware of this fact.
    One more benefit is that you only need to change document names and in create new entry you'll have to enter all the fields one by one and you don't know which value is more appropriate for this field. It also saves time efforts and people like me always prefer to save efforts
    Thank$

  • Overview fields used per document type in MM and FI

    Hello All,
    iIs there a possibility to get an overview of all fields used (mandatory, optional etc.) for each document type in MM and FI? I want to create a list which fields per document type are used in both MM and FI and which are only used in MM or FI.
    Thanks in advance for answers!

    Hi,
    You can point out all the fields with
    1) At the time of defining Screen lay out for purchasing (NBF) in MM for GR-IR Control.
    2) or you can tally which tables are conjugated with MSEG from SE11.
    Might this will clear you.
    regards,
    Ninad

  • Assignment field in goods issue/delivery document type WL

    Hi,
    Would anyone know where we can check how the value for Assignment field in goods issue/delivery document type WL is determined? Any help is greatly appreciated. Thanks.
    Sheila

    Thanks Samit. We are already aware of the delivery document type. Would this be maintained anywhere in the copy control? We are still not able to determine how the Assignment field is populated in the accounting document of goods issuance. Thanks.

  • Assignment field in WA document type

    Hi,
           In the FI document type WA (Goods issue), we would like to populate the material document number in the assignment field of the accounting document when it is posted. Is there any user exit to acchieve this ?
    min

    Hi Raja,
    What kind of documents are these? If they are billing documents, the assignment and reference fields are copied as per the configuration done for SD document copy control. If these docuemnts are uploaded documents or coming through an extenal system, the abap program must be populating these values based on sime criteria.
    Kindly check let us know the kind of documents and how the entry happens.
    Thanks and Regards,
    Anit

Maybe you are looking for