BOM List in Component overview of maintenance order

Hi Friends
When we look at the structure list in the component overview screen to select the component in the maintenance order, the BOM list is shown only for the validity on the order creation date .
However subsequently the BOM had undergone changes ( new component has been added to the equipment BOM)
This new list is not available to enable us to select the component .
How can this be handled ?It would be better to have the structure list for the current day as validity !
Thanks in advance .

SAP has replied to our issue as given below
When calling the structural list on the component screen the
start date of the order is taken into account. If you need the
structural list of another day (for example today) you will have to
reschedule the order.
On the header screen the display of the structural list is a general
functionality  (shared with notification, functional location, etc.) and
the date of today is taken into account.
By opening the Structure (Folder Components ) the system checks the
earl.start time form your order and the valid from date of all
components in your BOM.In the structure display you can only find the
components where the valid from date have the same range as the
early .start time of your order.
This is SAP Standard Logic.
You can perhaps try user Exit IWO10029 which may be of some benefit in
your case.

Similar Messages

  • Component selection in maintenance order

    Hi,
    My client want to see unrestricted stock of material while creating maintenance order. In Component tab when we take input help to search components, we can able to see material no & descriprion. In addition I want is to display current unrestricted stock & plant for the material.
    Stock data can be taken from table MARD. I want to know is there any user exit available for this ??
    I know one exit IWO10011 Maint. order: Customer enhancement for component selection, but I am not sure whether this will work or not.
    Any input would be appreciated.
    Thanks,
    Hitesh

    Hello Hitesh,
    If you want to see the unrestricted stock of the material entered in component tab then put your cursor on the storage location
    field in the same component row and press F4. Here, you will get the unrestricted stock.
    Regards,
    Vaibhav Mishra

  • Prevent changes in Component of a maintenance orders

    Hi Experts,
    I have two questions:
    1. Is it possible to restrain and changes to Component line items (Materials) in maintenance order once it's released except for allowing deletion of the material?
    2. Is it possible to make the filed "Item Category" as Display right when entering the materials in a maintenance order to prevent users from the changing the IC which is defaulted from Material Master?
    Once I set it as Display it only takes an effect once we enter a material number and press enter but if a user changes the IC before that the system allows it.
    Please help

    Hi,
    For question 1:- Use User exit PPCO0023 : Check Changes to Order Components
    For question 2 :-  In our project we have used use exit CNEX0013 Order: Cust. enhancement: Default item category comp. assgmt to populate item category once material no is entered & grey out the field ..
    pls check the above user exits ..
    regrds
    pushpa

  • Mass Removal of component from Maintenance Order Component list

    Hi Gurus,
    I had a long list of material which have been set with deletion flag. With this list, I had remove them from BOM using CS20. Does anyone knows how to remove a component from the maintenance order component list based on that material had set deletion flag in material master & that GI had not been done? Appreciate your help.
    Best regards,
    David Tan

    I guess we dont have std function to do this..
    I will suggest to take help of an abaper & create a code to find material & delete from orders.
    Regards

  • Component quantity in production order

    Hi,
    For my finished product component quantity in BOM is 1.386 for the base quantity 100.When am creating the production order for 100 in my component overview of  production order screen it is showing component quanitity as 2 instead of 1.386.
    Since am not using any rounding value,rounding profile and scrap nad upto 3 decimals allowed in CUNI for particular UOM.
    Thanks
    P.Srinivasan
    Edited by: srinivasan ponnurangam on Dec 23, 2011 12:33 AM
    Edited by: srinivasan ponnurangam on Dec 23, 2011 12:35 AM

    As I understand even if production order screen it is showing component quanitity as 2 instead of 1.386 ,Internally it is stored as 1.386 only.
    So as per knowledge it should not affect anything.
    Refer Note 931971 - Decimal places in stocks and stock postings
    Also refer
    Problem with item/component quantity in BOM

  • Line item deletion in Maintenance order

    Hi Guru's
    Please let me know how to find the deleted line item in the component tab of maintenance order before saving.
    for eg. The user creates the following line item in the component tab of the maintenance order.
    Before saving he deletes the line item 20.
    Item   component   qty
    10       100001        10
    20       100003        20
    Please let me know  where exactly the deleted status is stored, before saving for the line item
    Regards
    Vidhyadharan

    Hi Pete
    We are trying to prevent the user from creating product line items in Maintenance order with respect to equipment BOM. Let me explain you the scenario
    Equipment 1000201 - contains the following components as BOM
    1002775 - qty 2
    1003326  - qty 1
    When the user creates the order , he tries to withdraw more qty than the qty specified iin BOM. We have controlled it using enhancement IWO10009.  Initially we didn't anticipate that the  control can  be skipped by duplicating the material (i.e material line) eg line no 10 :1002775 - qty 2 and line no 20: 1002775 - qty 2 and the transaction is saved. In order to control, we have modified the program accordingly and never allow the user to save, if there is a duplication of material.
    The problem started when the user tries to save the line item after deleting the duplicate material
    The check we used doesn't not allow the user to save inspite of the line item been deleted. The msg introduced keep repeating .
    We tried debugging the program, we wouldn't find any  deletion indicator in the structure   CAUFVD_IMP or resb  to overcome this bug.
    Can you pls let us know where exactly the deletion indicator or status is stored for the line item in the component tab before saving
    Regards
    Vidhyadharan

  • PR type generated by maintenance orders

    Hi Gurus,
    Where do you defined the type of purchase requisition generated by maintenance order ? Is it possible to have different types of PR depending on the material type of the component in the maintenance order ?
    Cheers
    Olivier

    Hi,
    You can define the PR type at following IMG point:
    - Plant Maintenance and Customer Service
      - Maintenance and Service Processing
       - Maintenance and Service Orders
         - General Data
           - Define Account Assignment Cat. and Document Type for Purchase Requisitions
    The value is usually set to NB but this can be different. Only one value can be defined for PM orders.
    To get varying document types consider exits COZF0001/COZF0002 and adjust the field BSART.
    -Paul

  • Operation details of a Maintenance Order.

    Hi Gurus,
    I am looking for a link to pick up the Operation number along with Operation description and the details of components required using tables. I will have the input as a number of Maintenance Orders and I want the system to bring out the details given below using the data tables. This will be for a report to print out the pick list for a number of Maintenance Order together. The same way as you can print the pick list for an individual Maintenance Order. I want the system to compile the pick list of a number of Maintenance orders and allow the users to print it. As far as i am aware I do not think it is possible to print the pick list of a number of maintenance orders together.
    1. Maintenance Order.
    2. Maintenance Order type.
    3. Maintenance Order description.
    4. Operation number.
    5. Operation description.
    6. Plant.
    7. Storage Location.
    8. Work Center.
    9. Reservation Number.
    10. Reservation Date (when required).
    11. Material.
    12. Material Description.
    13. Quantity Required.
    Any help with the logic to get all these details will be much appreciated the input for the report will be Scheduled start date, Scheduled Finish date, Order types, Order numbers.
    Regards
    Anoop

    Equipment number u2013 Apply AUFNR value in AFIH table & get EQUNR values.  Only for the found out AUFNR values, further report should be developed. Consider corresponding EQUNR values.
    Maintenance Order Description u2013 Apply AUFNR value in the table AUFK field KTEXT and display in the report (For the MTD period Calculated)
    Order type u2013 Apply AUFNR value in AUFNR field in table AUFK & get AUART value.
    Operation / Activity u2013 The transaction has to read the field AUFPL in
    the table AFKO. Selection criterion is the order number (Field AUFNR table AUFK).
    The content of field AUFPL has to be used afterwards as selection criterion in the table AFVC. The selection field in this table is again AUFPL and display the field LTXA1.
    Planning Plant u2013 The entry must be checked against table EQUI and field
    EQUNR and against ITOB and field IWERK and display the value from table T001W
    Fields WERKS & NAME1
    Reservation - You can get from RESB table
    Material Number - From RESB table
    Work center - Apply EQUNR value in AFIH table to get GEWRK. Apply that value in OBJID in CRHD table to get ARBPL value.
    I guess, you can't link operation & material in single report. As one operation may have multiple materials, just define the logic before finalising the format.

  • WCM Work Operation tab  is disappearing in Maintenance Order

    HI All,
    I am facing problem in WCM.
    In the Maintenance Order,Work Operation tab  is disappear after seleting Task list.
    After saving the maintenance order and open in change mode,The WCM operation tab appears again.
    Can anybody help me on this
    Thnaks in Advance
    Vishal

    HI Uwe,
    Many many thanks
    As per note implementation,
    General task list secetion problem is solved
    but still we are facing the problem in selection of Functional task list 
    Can you please suggest on this
    Thanks
    Vishal

  • List Display of component in subcontracting Purchase order

    Hi experts
    I want to know is there any transaction by which i can see list display of component in subcontracting po.
    Regards
    Parkash

    What do you mean by list display?
    You can display it in the purchase order itself.
    If the normal table display is not good enough, then when in the Component Overview (you get there by pressing the BOM icon on Material Data TAB of the purchase order item), go to the menu:
    Component list --> Print
    and you get a list format.

  • Production Order - Component Overview - Storage location

    Hi,
    While i create Production orders, i do not see the storage locations for the components,listed in the component overview screen. I have maintained storage location & storage bins through MMSC transaction.
    Am i missing any config setting, so that the storage location will be visible in the Production Order.
    regards,
    K.Kumar.

    Hi
    You have to maintain the production storage location in the Material master (or) in BOM.
    In Material master MRP2 View, if you maintain the production storage location it is applicable where ever you use that material.
    In BOM-->Select the component >Go to item details> select the "Status/Lng text tab"--> here you can maintain the Production storage location. If you maintain here it is specific to this BOM only.
    Please check and revert.
    Regards
    Bala

  • Production Order Component Overview

    Hi All ,
    Could you please guide to understand the following will be grateful.
    In the production order component overview screen-MENU BAR is having following list
    Order, Functions, Edit, Goto, u201CCOMPONENTu201D, Environment, System, Help.
    In the above, if you left click the COMPONENT option there will be drill down option, in that there you have u201CCharacteristic Value Assignmentu201D
    u2022 What is the functionality of this option (u201CCharacteristic Value Assignmentu201D) ?
    u2022 If I select the BOM component in the component overview and I left click the COMPONENT option in the menu bar and select the u201CCharacteristic Value Assignmentu201D what will happenu2026.
    Thanks in Advance....

    Hi ,
    This is for the Component selection according to the Characteristic Value it will take you to Class to which Characteristics are
    assigned , say if your component selection based on the characteristics value say if your Hardness of the Raw material is
    99% based on that your Yield would vary for the Finished Product .
    You have created MIC 's with Hardness with characteristic value 95% , 96% , 97% and 98% etc....
    Your Quality lab has given test value for this component as 99% so your component selection will be this characteristic value
    as master data .
    Assign Characterisctics to Class , Assign class to class type 023 / 022
    Regards,
    Jayavimal

  • Storage Location in Production Order Component Overview

    Hi All,
    When creating a Production Order using CO0, the Component Overview will list out the corresponding BOM for the Finished Good.  We have defined a number of plants and storage locations.  I see here that the plant and storage location is automatically determined in the components overview.  I would like to set defaults for these, may I ask where in SPRO is this configured?
    Thanks in advance

    Hello
    Storage location in production order is pre-setting in bom component level/and MPR2 view,
    First priority is Bom Component level, i will transfer Production order only this BOM if maintianed here.
    second priorty is Material master date in MRP2 view, it will effected all components and all bom which used this components.
    Benny

  • Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

    I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order.  Can you pl. tell me how to configure this scenario.
    Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
    Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

    Hi,
    Automatic Batch Determination for production order components is possible by configuration.
    You can also refer below discussions to map your scenario.
    Batch determination in production order | SCN
    Automatic Batch Determination in Production order
    Regards,
    Naresh

  • Component and its BOM list

    Hi ,
    Where can we see the list of BOM header materials in which a given material is a component.
    Ex:- If component  'XYZ'  is of  material type - ROH or HALB. If the component 'XYZ' is used in different BOMs. Where can we see these list of BOMs in which component 'XYZ' is used?.
    Thanks in advance.

    Dear
    Goto CS15/CS14-BOM Where used List .
    Execute CS15-Here if you are useing various BOM , then mark the Used in option ( Material , WBS, Order , Documents BOM) and Mark Type of Where used list as Direct and then Goto next page ( hit the Arrow ) -Give the Required qty  , Plant Code , Usage -PRD means 1 an Universal means 3  from selection menu and finally hit Execute .It will list down all the qty , header items and relevent information as per your requirement .
    Regards
    JH

Maybe you are looking for