Business Scenario Communication State = Failed

Hello Guys,
I try to configure Business Scenario Communication in NWA. I got Failed State once I activate it.
I have set the communication profile in NWA and now I want to configure business scenario communication, my problem is here that I don't find Service Definition which I want to use. Even though, I have publish the service in Service Registry it shows the service in SR. But it doesn't show me in Business Scenario Communication configuration.
In Business Scenario Communication configuration, Service Group is found which I have selected. This service group I have created at the time of creating Model in Webdynpro by using WSDL link. Once I activate the Business Scenario Communication configuration it shows me FAIL in STATE column.
Do you have any idea??
Regards,
Naeem

i close this thread. I need to open the other one.

Similar Messages

  • Activate Business Scenario Configuration Error in SCL SOAMANAGER

    Hi Holger,
    With your assistance, I managed to solve my issue creating the business scenario as posted in
    Re: 3.3.8 Create a Business Scenario Configuration .
    However, now I face another situation.
    Once I have created the 3 required business scenario's on my SCL, I then proceed to activate them.
    I face the similar error as posted by Simon Kemp previously on Activate Logical Ports Fails with UDDI error
    Error Message:
    Activate logical ports for service group /IWCNT/BPC_SERVICE_GROUP and application PS_ER4_100/APP_ER4CLNT100 in scenario STARTER_SERVICES
    I have created the SAPLOGONPROFILE version 1, exported from the backend and imported into the SCL. The versions are the same.
    Thanks.
    Regards,
    Haridev

    Hi,
    the troubleshooting guide I have created is now online:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/603ab5a0-184b-2e10-98a7-fa7e7e9da7a1
    Can you take a look at the chapters:
    7. An unexpected error occurred while executing the specified Action
    18. When opening a Workspace in the Start Services scenario you get an unexpected error occurred
    Maybe when you look through the Analysis and Resolution you get some points.
    If it does not help please provide more information of the error that you get when activating the service.
    Regards,
    Holger.

  • Urgent:IMP-00017: following statement failed with ORACLE error 3113

    OS:HP_UX 11i
    Oracle 9.2.0.3.0
    when import tablespace metadata,
    comand is "imp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y DATAFILES='/oradata/data2/
    B.dbf' TABLESPACES=A FILE=A.dmp IGNORE=Y LOG=./log/import.log"
    the error occurs as followed:
    Export file created by EXPORT:V09.02.00 via conventional path
    About to import transportable tablespace(s) metadata...
    import done in US7ASCII character set and AL16UTF16 NCHAR character set
    import server uses WE8ISO8859P1 character set (possible charset conversion)
    . importing SYS's objects into SYS
    IMP-00017: following statement failed with ORACLE error 3113:
    "BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3626"
    "7,35051,1); END;"
    IMP-00003: ORACLE error 3113 encountered
    ORA-03113: end-of-file on communication channel
    IMP-00000: Import terminated unsuccessfully
    export is in same enviorment, the successful informantion below:
    exp \'sys/sysadmin AS sysdba\' TRANSPORT_TABLESPACE=y TABLESPACES=A FILE=A.dmp
    LOG=./log/export.log
    log file:
    Export done in US7ASCII character set and AL16UTF16 NCHAR character set
    server uses WE8ISO8859P1 character set (possible charset conversion)
    Note: table data (rows) will not be exported
    About to export transportable tablespace metadata...
    For tablespace A ...
    . exporting cluster definitions
    . exporting table definitions
    . . exporting table A
    . exporting referential integrity constraints
    . exporting triggers
    . end transportable tablespace metadata export
    Export terminated successfully without warnings.

    I do it,but the same error message.
    export message:
    Connected to: Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.3.0 - Production
    Export done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
    Note: table data (rows) will not be exported
    About to export transportable tablespace metadata...
    For tablespace A ...
    . exporting cluster definitions
    . exporting table definitions
    . . exporting table A
    . exporting referential integrity constraints
    . exporting triggers
    . end transportable tablespace metadata export
    Export terminated successfully without warnings.
    Import Message:
    Export file created by EXPORT:V09.02.00 via conventional path
    About to import transportable tablespace(s) metadata...
    import done in WE8ISO8859P1 character set and AL16UTF16 NCHAR character set
    . importing SYS's objects into SYS
    IMP-00017: following statement failed with ORACLE error 3113:
    "BEGIN sys.dbms_plugts.beginImport ('9.2.0.3.0',31,'2000',NULL,'NULL',3627"
    "7,36451,1); END;"
    IMP-00003: ORACLE error 3113 encountered
    ORA-03113: end-of-file on communication channel
    IMP-00000: Import terminated unsuccessfully

  • Accounting entries in PRA under various business scenarios

    Can anybody send me the detailed data flow chart in PRA (IS oil and Gas) alongwith the accounting entries under various business scenarios  explaining the financial impact so as to understand the production and revenue accounting recorded through PRA module?
    Thanks,

    For quick and correct response. Please post your question in the following forum -
    SAP Community Network Forums » SAP Solutions » ERP Financials
    Thanks,
    Shambhu.

  • OBY6 - use of tick box "Business Area Fin Statements

    Hello All,
    there is a tick box in transaction code OBY6 "Business Area Fin Statements"
    I have to do testing for this tick box i.e. what if we select this tick box & what if we do not select this tick box.
    Could anyone pleae guide me what should be testing scenario for this. Thanks
    Deepak Garg

    please research this before posting next time.

  • SAP crm implementation business scenario for crm  marketing project

    Dear guru's
    Can any body will help me to know about one sap CRM  marketing implantation project business scenario.
    Like one full process of marketing project and the integration of the other modules like r/3,
    Like what end users do if we implanted the marketing project for one company,
    Any industry but please give me detailed with the documentation if possible.
    I practice with the best practice but iam not able to the comparison to the business process of the company.
    No need to tell about company details I want  to know only the process.
    Like which type of company it is suet or which type of company it is not sute.
    If there is any document like this type of company sauté for the marketing and like this type of company suites for the service modules like that.
    this  is sivaanjith this is my  please help me to come out of this confusion.
    Reards.
    siva anjith

    hi
    well talking about the implementation project in CRM
    let us assume we are implementing it in BANKING industry
    here the requirement is in improvement in the field processing and all the effeciency of the sales or feet on street
    so we implement the CRM marketing with CIC
    what it will do that we start with first the readiness document that what all are the requirement of the bank and how the company can cope it with the help of CRM
    then we prepare the BLUEPRINT to state that the data to be processed will be strucutured in CRM in how many phases or the timely schedule of the roll over of CRM in bank
    next up we start with the configuration ,like we have to start campaigns and generate leads for the banks which may get converted into the opportunities
    so have to do all the configuration of CRM according to the requirements being given
    one thin g i forgot which is very imp is that we do requirement gathering,its pretty imp part of entire process
    after getting these only we can do whatever we want with CRm
    so after that we realise the configuration in realisation phase then we do those UATs and SITs
    this way we phase out the CRM in any sector
    just a gist of everything
    hope i cleared some air
    best regards
    ashish

  • 3.3.8 Create a Business Scenario Configuration

    Hi,
    I am trying to create Business Scenario Configuration via the SCL SOAMANAGER site.
    I click New, key in STARTER_SERVICES as the name and then proceed Next.
    I click on Add, the Search page is displayed.
    But I only have the option to search by Service. The guide states to change it to search by ServiceGroup.
    I dont have that option.
    Is there another way of doing this?
    Thank you in advance.
    Haridev

    Hi Haridev,
    all these steps should be taken care of by the installation Wizard.
    However, if you want to do it manually, then make sure that you are in Step 3 Consumer Side. Click on Add and a new Window should open. In here the "Search By" field has "ServiceGroup" selected by default.
    My guess would be that you are still in step 2 "Provider Side" where you can only search for Services.
    Regards,
    Holger.

  • Posting Rented Services Business Scenario

    Hi,
    Scenario 1:
    I have a business scenario where, we are using computers on rent & we also buy new computers for our personal use. Now, I want to track all computers (purchased & on rent) in my warehouse. I know that if any computer shows up in Inventory or Warehouses it is going to impact my Balance Sheet inventory account with both rented & owned computers. However, rented computers are not our own computers.
    I want to know:
    1. How shall I post for the expenses on rented computers. Whether this can be posted as service PO or Item PO. We are hiring 120 computers with an agreement for 2 years @ Rs 500 per computer per month.
    2. How to track my rented computers in different warehouses without effecting my Inventory ie. Balance Sheet
    3. After completion of the rent agreement how to show all the computers out of the system.
    *Scenario 2:*
    In case of Service PO, how can we show that the service is received before the Accounts department raises the AP Invoice for the bills received for the services ?

    Hi Vickss........
    You can manage this thing by having single Item Master but you should have Different two warehouse.
    1. For Rented
    2. For Owned
    Set Manage Inventory and Item cost by Warehouse in Document Setting.
    Now when you do transaction for rented computers dont involve cost or unit price.
    And when you do transaction for owned computers do involve cost or unit price.
    This way it won't affect your balance sheet and accounting will bemanaged properly......
    You also get the track of inventory as per Owned and Rented computers in their respective warehouse.........
    1. You can receive the rented computer by Goods Receipt in inventory and raise Service PO.
    2. Answered in above statement You can manage this thing by having single Item Master but you should have Different two warehouse.
    1. For Rented
    2. For Owned
    3. Just do Goods Issue from rented warehouse without involving any value........
    Regards,
    Rahul

  • Business scenarios for the Steel industry

    Dear All,
    I need the various business scenarios used in the steel industry for the procurement and inventory management. In case anyone have worked on an implementation project for Steel industry can you please guide me which are the major scenarios common to all steel industries?
    Thanks.

    Hi,
    Here are a few scenarios which I have worked:
    1.Steel is usually procured in the form of plates of different dimensions (length, width & thickness).
    To capture this, you can activate material class (class 001) for material master.
    You can create your own class and have these dimensions as characteristics.
    While creating material codes, you can capture the dimensions as characteristic values..
    This way, you can maintain the uniqueness of material codes in the system.
    2. Steel is usually procured in bulk from various sources, both domestic and imports.
    As such, the price of the same material may vary depending upon the source and also when it was procured.
    Hence, it becomes a necessity to manage the different lots separately.
    You can activate batch management in inventory or better still, Split valuation by batch to handle this.
    3. If steel is procured for specific project, then the purchase requisition/purchase order will be for specific Project (WBS element).
       This means you will be working with a/c assign.categ "Q"
    4. You can have Order unit that is different from base unit (Stock keeping unit.)
        you can maintain suitable conversion factors for the same.
    5. While issuing steel to Production, the big steel plates may be cut into smaller pieces and issued.
        So, you can have a different unit of issue in material master along with conversion factors.
    6. If your client is having tender system for procurement, then you can have the RFQ to handle this.
        You can have different loading factors to assign different weightages for vendors while maintaining Quotations.
         You can go for an enhancement to RFQ screen to capture extra fields relating to tender.
        You can have a Z form to output tender comparative statement as per client requirement.
    Hope the above info is useful to you.
    Regards
    Prabhu

  • Business Scenario Example

    Hello All...
    can someone help in giving a generic FI/CO business scenario. And the process flow.
    thnx in advance
    NT

    Hi,
    Normally business scenarios in finance
    a. Procure to Pay - Purchase Req, Purchase order, Goods Receipt, Invoice Receipt,  Payment to vendor, Bank reconciliation (this is End to End process)
    b. Order to cash - Sale order, Delivery, Post goods issue, billing, Incoming payment, Payment allocation, Dunning, Interest calculation, customer statement (End to end)
    c. Asset Accounting - Project system, WBS element, Purchase order, Receive asset, Invoice booking, Asset capitalization,  depreciation,  retirement, transfer.
    These are some of main business scenarios
    Thanks
    Ashok- Assign points if this is useful

  • Tighten inspection business scenario in DMR setup

    Hi all,
    I have the following two scenario on DMR, hope you can answer me. Appreciated.
    Sccenario A
    May I know when the tighten inspection incurs as a result of dynamic modification rule, normally, what will the consequence on checking in term of business scenario, let say for example, we would like the the tightening inspection to be something likeu2026
    Sample size: increase to 10% compare to current level of stock quantity.
    The reject number of failed stock must be lower compare to current level of reject level.
    Question 1
    My 1st question is do I have to set this kind of tighten inspection in sampling schema?
    Scenario B
    Currently I have sampling schema setup with the following Inspection level/AQL value:
    Inspection Level --------------------------------- AQL value
    1 u2013 Inspection with Sampling Schema --------------- 1.00
    2 u2013 Reduced Inspection ---------------------------- 1.00
    4 u2013 Normal Inspection ----------------------------- 1.00
    6 u2013 Tightened Inspection -------------------------- 1.00
    This sampling schema is assigned to a sampling procedure, with the ADDITIONAL DATA value (i.e. additional data reference to sampling scheme) to inspection severity 4 and AQL value 1.00.
    This sampling procedure is assigned to an inspection plan with material A, and plant 1000. Further I have created a DMR and assigned it to this sampling procedure in Tcode QDB1 (assign sampling procedure) table.
    Next, an inspection lot is created and is rejected on usage decision. My DMR machanism kicks-in and update the next inspection stage as the u201CThighten Inspectionu201D stage.
    Question 2
    Thus, my 2nd question is:
    Does the system going to perform the valuation (i.e. to reject and to accept a result recording) based on the above inspection level of 6 (i.e. Tightened Inspection) sample plan specified on the schema BECAUSE the new inspection stage now is u201CThighten Inspectionu201D stage??
    If not like what I said, I am wondering how R/3 going to perform the logic on the new inspection stage when the DMR kicks-in for the next inspection lot?
    Thanks
    YY

    Dear Yong
    Tighetened inspection represents its literal meaning of tightening the insepection.
    1) Tighetened can be done in many ways for eg
    a) You increase the no of inspection for this material
    b) Increase the sampling size and acceptance number for the material
    This is all based on what you define in the system. It is not mandatory that you have to mention tightened inspection but it is more of a functional need
    2) System will valuate based on the acceptance number and AQL value which you have mentioned in the sampling scheme if the stage mentioned is Tighetened
    Hope this gives some idea
    Regards
    gajesh

  • Content index state: Failed

    Hi.
    I have been restoring the entire Windows after a bigger problem in the past. However, there were data for Exchange server at a completely different disk which was not affected.
    But now I can not load up OWA and when you look in the ECP so says the following under databases "Content index state: Failed"
    I have tried to repair it but without any success.
    The operation couldn't be performed because object '0747478411\MAIL-SERVER01' couldn't be found on 'server'.
        + CategoryInfo          : NotSpecified: (:) [Update-MailboxDatabaseCopy], ManagementObjectNotFoundException
        + FullyQualifiedErrorId : DD4CF704,Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateDatabaseCopy
        + PSComputerName        : mail-server01
    Update-MailboxDatabaseCopy "0747478411\MAIL-SERVER01" -CatalogOnly
    All i have in owa now is
    something went wrong
    Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.

    Hi Jesper,
    Thank you for your question.
    By my understanding, we should not simply recover window system, we should performance a disaster recover for Exchange by the following link:
    https://technet.microsoft.com/en-us/library/dd876880(v=exchg.150).aspx
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Special Business Scenarios

    Hi Gurus,
                     Can some one throw light on Special Business scenarios of SAP IS-H,SAP IS-H*Med.Thanks in advance.
    Regards,
    K.V.S.Phani Prasad.

    Hello,
    your question seems a bit generic to me so allow me to answer the same style:
    Admission -> Patient management -> treatment planning/logistics -> treatment documentation -> discharge/billing -> follow-up-treatment ...
    ... accompanied by material management, medication, occupancy management, HR services, communication features with all kind of stakeholders like insurances, general practitioners, specialized service facilities(labs, rehab institutions, ...), research ...  to name but a few ....
    my 2 cents,
    anton

  • Business Scenarios using MDM

    hi,
    i want some material on mdm which states the problem statement...
    as in which are the business scenarios where mdm is used...
    i dont need an overview or something...
    just few scenarios so that i can implement it using mdm...
    can any1 help?

    Hi,
      Please follow this link for your reference. I have few document on this. Give me your mail id.
    Steps of a scenario in MDM
    Regards,
    Ron
    Plz reward points if answer is helpful

  • Business scenarios for daily, weekly and nightly loads!!

    Can any body tell some Business scenarios for daily, weekly and nightly loads where we monitor the loads in Production support.
    Regards
    srikanth.ch

    Hi,
    It all depends on your business needs. In general on daily basis you will load the SD and MM which will cover all the stock and sales done for day. Generally most of the clients use Lo Cockpit extraction for both the modules. FI chains will run on month end for example the AP(Accounts Payable),AR(Accounts Receivable) chains will be run on the month end.
    Some SD datasources : 2lis_13_vdhdr, 2lis_13_vditm, 2lis_13_vdkon - all these to pull billing related data
    Some MM Datasource : 2lis_03_bx and 2lis_03_bf.
    Regards,
    Harish Raju

Maybe you are looking for