BW Report mismatching with R3 data

Hi,
I am facing very strange issue.For one of BW Reports -we are reporting -billing doc data with details like quantity,net value in BW report.While for some of biiling doc quantity is matching with SAP table-VBRK /VF03.There is no restrcition at query level only formula is used for getting Billing Qty.
I also tried with test query with no formula but there also some bIlling doc qty not matching with R3.Also billing qty value coming till Infocube is Correct and matches with R3 vALUE.
CAN Any one help please.Quick help will be Appreciated !!
Thanks,
Nilesh

>
npathak wrote:
> Hi,
>
> I am facing very strange issue.For one of BW Reports -we are reporting -billing doc data with details like quantity,net value in BW report.While for some of biiling doc quantity is matching with SAP table-VBRK /VF03.There is no restrcition at query level only formula is used for getting Billing Qty.
> I also tried with test query with no formula but there also some bIlling doc qty not matching with R3.Also billing qty value coming till Infocube is Correct and matches with R3 vALUE.
>
> CAN Any one help please.Quick help will be Appreciated !!
>
> Thanks,
> Nilesh
Any unit conversions done ?
or
Aggregates missing rollup ?

Similar Messages

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Reports generated with null data

Hi,
I setup a role which has read access to all records under different tab corretly. However, the reports are displayed with null data. Any idea?
Thanks VK

Hi Bobb,
"Role-Based Can Read All Records" equal to No in my configuration. Requirement is not to allow report creation on others data.
So, if I make it Yes, then they can access all data in CRMOD and create report. Please let me know if my understanding is correct.
Thanks VK

Region Report reloading with wrong data

Hi all,
I'm having an odd problem with APEX that I'm hoping somebody could help with.
I have a region report containing 30 text fields, VALUE_1 to 30. The report contains several Validation rules and when submitted with no errors it works fine. However, when any of the Validations picks up an error, the page reloads as expected with the inline error text showing fine...but the text in the VALUE_7 field has been copied into the VALUE_17 input field (so both fields are displaying the same text). The data in all of the remaining cells displays fine. I've checked all of the obvious report and column attributes but can't see anything wrong and I'm happy that the copied data in the VALUE_17 field is not coming from the database.
Can anybody point me in the direction of things to try? Can a report become corrupted or are there known report issues with my version of APEX? (v4.0.2.00.07).
A large amount of Googling hasn't shown any similar problems.
Many thanks,
~H.
PS: Apologies for the username, the Preferences option refuses to admit that I've changed it!

Hi Hinden,
Is your report based on a table or a collection? Normally if it is based on a table the report would revert back to the original values of the table, when you first went to this page, if the validation fails. If it is based on a collection then you need to check the code where you fill up your collection, my guess is you insert the wrong values there.
Regards,
Joni

(Please note) - Report - Bluetooth with Enhanced Data Rate Software II for Windows 7 wipe main drive

All,
There have been reports that when upgrading the Bluetooth with Enhanced Data Rate Software II for Windows 7 to version 6.4.0.1700 is causing a wipe on the main OS drive (commonly C:\)
Version:
6.4.0.1700
Release Date:
2011/05/16
Affected units which uses this version of driver are as follows.
Support models ThinkPad L420, L421
ThinkPad L520
ThinkPad T420, T420i, T420s, T420si
ThinkPad T520, T520i
Thinkpad W520
ThinkPad X1
ThinkPad X220, X220i, X220 Tablet, X220i Tablet
ThinkPad Edge E220s
ThinkPad Edge E420, E420s
ThinkPad Edge E520
Issue has been raised to engineering and the team are currently working on it.
****Please do not update the Bluetooth driver until further notice****
We are in a process of pulling the driver off the Support Site and ThinkVantage System Update
Main thread discussion here
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD
Solved!
Go to Solution.

All,
Updated drivers have been released to the web team and should be published in the next couple of days.
Will update this thread once they are live - the official solution will be to use the newer drivers.
mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Report Output with Key Date

Dear All,
I have the following fields in DSO.
Key Part: EmployeeID, DateTo, DateFrom.
Data Part: Designation, AnnualSalary.
I have data in the DSO as follows:
EmployeeID DateTo        DateFrom      Designation AnnualSalary
1                 12.11.2008 01.01.2008    Worker        10000
1                 31.12.9999 13.11.2008    Officer         20000
2                 14.11.2008 01.01.2008    Worker        10000
2                 31.12.9999 15.11.2008    Officer        20000
Now If I give key date as 13.11.2008.
The Output of the Report should be like this:
EmployeeID Designation AnnualSalary
1                 Officer         20000
2                 Worker        10000
How can I achive this ??
Cheers,
Neel.

Hi,
I think you can achieve this by using a formula with boolean operators "is less than" and "is greather than", and then also use row/columns settings and/or conditions to suppress rows that does not contain the key date.
BR,
Niclas

10g Reports issue with XML Data Source

Hi,
Has anybody ever encountered an issue with Oracle 10g report using an XML as the data source? What happens is, some of the values in the XML are printed to the wrong column.
One of the elements in our XML file is a complex type with 10 elements under it. The first 5 are picked up properly, but the last 6 are not. Elements #6 to #9 has a minimum occurence of 0. What happens is when element #6 is present, but #7 is, the value for element #7 is passed on to element #6.
The XSD and XSL files are both valid since the reports were working when we were still using 9i. There is no hidden logic in the report which might cause this issue to come up, i.e., the report just picks up the values from the XML and prints it to the appropriate columns.
Any help will be greatly appreciated.

XSD used
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified">
        
        <xs:element name="TradeDetail">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="TradeType"/>
                                <xs:element ref="TradeID"/>
                                <xs:element ref="TradeDate"/>
                                <xs:element ref="FundID"/>
                                <xs:element ref="FundName"/>
                                <xs:element ref="DollarValue" minOccurs="0"/>
                                <xs:element ref="UnitValue" minOccurs="0"/>
                                <xs:element ref="PercentageValue" minOccurs="0"/>
                                <xs:element ref="OriginalTradeID" minOccurs="0"/>
                                <xs:element ref="CancellationFlag"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        <xs:element name="Instruction">
                <xs:complexType>
                        <xs:sequence minOccurs="0">
                                <xs:element ref="TradeDetail" maxOccurs="unbounded"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="InterchangeHeader">
                <xs:complexType>
                        <xs:sequence>
                                <xs:element ref="Instruction"/>
                        </xs:sequence>
                </xs:complexType>
        </xs:element>
        
        <xs:element name="FundID" type="xs:string"/>
        <xs:element name="TradeType" type="xs:string"/>
        <xs:element name="TradeID" type="xs:string"/>
        <xs:element name="TradeDate" type="xs:string"/>
        <xs:element name="FundName" type="xs:string"/>
        <xs:element name="DollarValue" type="xs:decimal"/>
        <xs:element name="UnitValue" type="xs:decimal"/>
        <xs:element name="PercentageValue" type="xs:decimal"/>
        <xs:element name="OriginalTradeID" type="xs:string"/>
        <xs:element name="CancellationFlag" type="xs:string"/>
</xs:schema>
XML used
<?xml version = '1.0' encoding = 'UTF-8'?>
<InterchangeHeader xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="TradeInstruction.xsd">
   <Instruction>
      <TradeDetail>
         <TradeType>Purchase</TradeType>
         <TradeID>M000038290</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>ABN Fund</FundName>
         <DollarValue>2111.53</DollarValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>Redemption</TradeType>
         <TradeID>M000038292</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>ARO0011AU</FundID>
         <FundName>AMRO Equity Fund</FundName>
         <UnitValue>104881.270200</UnitValue>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
      <TradeDetail>
         <TradeType>ISPurchase</TradeType>
         <TradeID>M000038312</TradeID>
         <TradeDate>20061201</TradeDate>
         <FundID>MLC0011AU</FundID>
         <FundName>Cash Fund</FundName>
         <OriginalTradeID>M000038311</OriginalTradeID>
         <CancellationFlag>N</CancellationFlag>
      </TradeDetail>
   </Instruction>
</InterchangeHeader>
XSLT used
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
        <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
                <InterchangeHeader>
                        <xsl:for-each select="InterchangeHeader/Instruction/TradeDetail">
                        <xsl:sort select="FundName"/>
                        <xsl:sort select="TradeDate"/>
                                <TradeDetail>
                                        <TradeType><xsl:value-of select="TradeType"/></TradeType>
                                        <TradeID><xsl:value-of select="TradeID"/></TradeID>
                                        <TradeDate><xsl:value-of select="TradeDate"/></TradeDate>
                                        <FundID><xsl:value-of select="FundID"/></FundID>
                                        <FundName><xsl:value-of select="FundName"/></FundName>
                                        <DollarValue><xsl:value-of select="DollarValue"/></DollarValue>
                                        <UnitValue><xsl:value-of select="UnitValue"/></UnitValue>
                                        <PercentageValue><xsl:value-of select="PercentageValue"/></PercentageValue>
                                        <OriginalTradeID><xsl:value-of select="OriginalTradeID"/></OriginalTradeID>
                                        <CancellationFlag><xsl:value-of select="CancellationFlag"/></CancellationFlag>
                                </TradeDetail>
                        </xsl:for-each>
                </InterchangeHeader>
        </xsl:template>
</xsl:stylesheet>

Report Builder with multiple data series

I am not able to figure out how to create a bar chart using
multiple data series in the Report Builder. I can do it with
explicit CFML coding but not in the Report Builder. I am running MX
version 7 with the current (as of 9/1/07) download of the Report
Builder.
My table contains visit information by site, with standard
demographics on each visit (age, race, gender, etc.) I am trying to
analyze the data by site, for example, race by site.
I am using an SQL statement to sort and group by site &
race. I can get a chart of the number of visits for each site or
the total number of visits by race across all sites. But I can't
get race by site. The SQL statement looks like this:
SELECT race, site, COUNT(*) as counter
FROM visit_info WHERE userid = #session.uid#
GROUP BY site, race ORDER by site, race
Every variation I have tried for showing race by site either
leaves out part of the results or creates a bar chart that has the
race and site categories as separate entities (White, Black,
Chinese, Site1, Site2, Site3, etc). I've also tried creating a
combined variable (site_race) but that doesn't seem to fare any
better.
Any help would be appreciated.

Pop,
Badunit's example is one possible arrangement that you might have described; that is, one column for X values and several columns for Y values. This is the case when you should respond that you are sharing X-values. With all the data in one table, you can select it all at once, so you don't have the problem with dragging additional series into the chart.
The Numbers User Guide PDF's first chapter is the place to start getting your bearings - you will learn how to distinguish Header vs. Body rows and columns. It's worth the effort to take another look at it.
Since you are using a Scatter Chart, it's important not to use a header column for X because X values must be Numeric, as opposed to Text.
Jerry

Report Model with mulitple data sources

Hi,
We have requirement to develop report model in 2008 having multiple data sources which includes SQL SERVER 2012 and Oracle database so end user can all the relevant data in one place to run in report builder. So please advise how this can be achieved.
One option I can think of pulling all the data into one database through SSIS and then build a smdl on it.
I heard it might be possible to build Tabular cube and then use Report builder on it not sure which is the best option unless any other solution.
Thanks,

You can use SSIS to collect data from multiple sources (SQL Server, Oracle, etc.) and store it in SQL Server database. Then you can use SSAS to build a cube on that database. With SSRS/reportbuilder you can create reports on the cube or on the database...
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Report: PO with delivery date

Hi friends,
I want to see the purchase orders for which the delivery date is over but item is not supplied yet. Is there any standard report for this?

Hi
in SE16
use table EKET
U will get desired report as per requirement
If u want modify report as per need..Go to setting>Format list>choose fields
I hope u will get required info by this report
Award point if usefull ans.
Vishal...

Purchase requisition report not showing any data R12.04

when i run "Printed Requisitions Report". Report run without any information.
EBS R12.04

Please refer to Note: 472332.1 - R12: Printed Requisition Report Ends With "No Data Found"
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=472332.1

Upgraded to Crystal 2008 - one of my reports now has no data

Upgraded to Crystal 2008, now at (12.3.0.601).
However one of my reports (which was previously developed in Crystal X1) is now coming up blank.
I've tested the data on the previous system and the report comes back correctly so there is not an issue with data.
The report is built using XML Schema files and assigning the datasource from VS2008.
When the application is built with Crystal X1, this works fine.
I've refreshed the report using crystal 2008 but no good.
Other reports which use SP's as the source are working fine!
Any suggestions?

Thanks for the quick response.
What I mean by 'I refreshed the report in Crystal 2008' is that I opened the report in Crystal 2008 and verified it.
I did not have to do this with the other reports.
I cannot test this in the designer as the data gets assigned from the application.
However, the old version of the report with the same data works fine.
Note - there are no error message. The report displays with no data.
There are no code change made so everything points to the report which is strange.
Other reports work correctly but this one is different as it uses XML source.
Thanks.
Edited by: Lehause on Aug 24, 2010 3:40 PM

Finacial statement report Comparison with Previous year in report painter

Hi Experts,
I am new to report Painter.I developed financial statement report in report painter with following data:
Table: FAGLFLEXT
Rows:GL Account Hierarchy(defined Manually)
General data selection: Ledger
Column 1: CCode,record type,version,period,fiscalyear
Column 2: Ccode,record type,version,period,fiscalyear
I tried various variables for fiscal year in both columns but in general data selection two fiscal year fields appeared and in output it is showing values according to only one fiscal year field in general data selection hence it is displaying values only in first columns and empty values in second column.
I hardcoded fiscal year values in both columns but still fiscal year field is appearing in general data selection and value input to that fiscal year results in displaying values in first column and empty values in second column in output.Please let me know where i went wrong.
Thanks&Regards,
narasimha.

Hi Narasimha,
Can you please post your solution.
Thanks,
Srini

Open sales order report with billing date.

Hi,
I want to know if there's an available report for open sales order with billing date field.
Thank you.

Hi,
If your case is "Order-related" Billing,you can use the T.Code "VF04" for this purpose.
One more way is to go for a custom report.
Make a copy of code of the T.Code "VA05n"(Program Name is "SD_SALES_ORDERS_VIEW").
Change the code as per your requirement to display the field "Billing Date" in the report.
Check with your ABAPer if you wish to go for a custom report.
Regards,
Krishna.

How to make column headers in table in PDF report appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp

Hi my name is vishal
For past 10 days i have been breaking my head on how to make column headers in table appear bold while datas in table appear regular from c# windows forms with sql server2008 using iTextSharp.
Given below is my code in c# on how i export datas from different tables in sql server to PDF report using iTextSharp:
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.Data.SqlClient;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Diagnostics;
using System.IO;
namespace DRRS_CSharp
public partial class frmPDF : Form
public frmPDF()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(6);
table.TotalWidth =530f;
table.LockedWidth = true;
PdfPCell cell = new PdfPCell(new Phrase("Institute/Hospital:AIIMS,NEW DELHI", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK)));
cell.Colspan = 6;
cell.HorizontalAlignment = 0;
table.AddCell(cell);
Paragraph para=new Paragraph("DCS Clinical Record-Assigned Dialyzer",FontFactory.GetFont("Arial",16,iTextSharp.text.Font.BOLD,BaseColor.BLACK));
para.Alignment = Element.ALIGN_CENTER;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(105f, 105f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn = new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select d.dialyserID,r.errorCode,r.dialysis_date,pn.patient_first_name,pn.patient_last_name,d.manufacturer,d.dialyzer_size,r.start_date,r.end_date,d.packed_volume,r.bundle_vol,r.disinfectant,t.Technician_first_name,t.Technician_last_name from dialyser d,patient_name pn,reprocessor r,Techniciandetail t where pn.patient_id=d.patient_id and r.dialyzer_id=d.dialyserID and t.technician_id=r.technician_id and d.deleted_status=0 and d.closed_status=0 and pn.status=1 and r.errorCode<106 and r.reprocessor_id in (Select max(reprocessor_id) from reprocessor where dialyzer_id=d.dialyserID) order by pn.patient_first_name,pn.patient_last_name", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("Reprocessing Date");
table.AddCell("Patient Name");
table.AddCell("Dialyzer(Manufacturer,Size)");
table.AddCell("No.of Reuse");
table.AddCell("Verification");
table.AddCell("DialyzerID");
while (dr.Read())
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString() +"_"+ dr[4].ToString());
table.AddCell(dr[5].ToString() + "-" + dr[6].ToString());
table.AddCell("@count".ToString());
table.AddCell(dr[12].ToString() + "-" + dr[13].ToString());
table.AddCell(dr[0].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
System.Diagnostics.Process.Start("AssignedDialyzer.pdf");
if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.Yes)
var writer2 = PdfWriter.GetInstance(doc, new FileStream("AssignedDialyzer.pdf", FileMode.Create));
else if (MessageBox.Show("Do you want to save changes to AssignedDialyzer.pdf before closing?", "DRRS", MessageBoxButtons.YesNoCancel, MessageBoxIcon.Exclamation) == DialogResult.No)
this.Close();
The above code executes well with no problem at all!
As you can see the file to which i create and save and open my pdf report is
AssignedDialyzer.pdf.
The column headers of table in pdf report from c# windows forms using iTextSharp are
"Reprocessing Date","Patient Name","Dialyzer(Manufacturer,Size)","No.of Reuse","Verification" and
"DialyzerID".
However the problem i am facing is after execution and opening of document is my
column headers in table in pdf report from
c# and datas in it all appear in bold.
I have browsed through net regarding to solve this problem but with no success.
What i want is my pdf report from c# should be similar to following format which i was able to accomplish in vb6,adodb with MS access using iTextSharp.:
Given below is report which i have achieved from vb6,adodb with MS access using iTextSharp
I know that there has to be another way to solve my problem.I have browsed many articles in net regarding exporting sql datas to above format but with no success!
Is there is any another way to solve to my problem on exporting sql datas from c# windows forms using iTextSharp to above format given in the picture/image above?!
If so Then Can anyone tell me what modifications must i do in my c# code given above so that my pdf report from c# windows forms using iTextSharp will look similar to image/picture(pdf report) which i was able to accomplish from
vb6,adodb with ms access using iTextSharp?
I have approached Sound Forge.Net for help but with no success.
I hope anyone/someone truly understands what i am trying to ask!
I know i have to do lot of modifications in my c# code to achieve this level of perfection but i dont know how to do it.
Can anyone help me please! Any help/guidance in solving this problem would be greatly appreciated.
I hope i get a reply in terms of solving this problem.
vishal

Hi,
About iTextSharp component issue , I think this case is off-topic in here.
I suggest you consulting to compenent provider.
http://sourceforge.net/projects/itextsharp/
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BW Report mismatching with R3 data

Similar Messages

Maybe you are looking for