Call queue notification

I just wanted to ask if anyone knew if this feature was available on blackberry, or if RIM could somehow incorporate it.
Before anyone says it was on the network, its not, its a built-in phone software feature with all the latest Sony Ericssons and Nokia handsets.
basically, if i would ring someone from my previous phone, and they were already on a call, it would tell me on my display that i was in a queue.
its NOT a call waiting service on their side or mine (i do subscribe to the service with my network provider, but thats only for incoming calls to me, ive not changed network provider since, only handsets)
any thoughts on this or applications which provide it?

The job_queue_processes parameter defines the total number of Jnnn processes available to the database, I don't have a 10g database I can connect to at the moment but I suspect the number 5 is some sort of internal setting in relation to notification processing, but it may also be that your job_queue_processes are limited to 5.
sho parameter job_queue_processes
Have a look at MOS note: AQ/PLSQL Notifications cannot be serialized (Doc ID 225810.1) - it explains that currently there is no way of setting up notification to serialize the processing unless you want to serialize all notifications by setting job_queue_processes to 1 - which obviously then prevents your other notifications from being processes concurrently, the above note gives one possible code solution you could implement to enforce serialization at the notification level.
HTH
Paul

Similar Messages

Declined call, does not appear as missed call in Notification center

When I receive a call in Lock screen in iOS7, with two quick clicks of the Sleep button declines the call, but does not appear as missed call in Notification center. It's a "new feature" or it's a bug?
I want it back like in iOS 5 and 6.

We are all users here, just like you, but you can tell Apple about it by using this link:
Apple - iPhone - Feedback

Call waiting notifications on Nokia 5800!!!!

I have a small problem.
When I call somebody from my nokia 5800 and that person is talking to smb., so my call is on waiting, i don't hear anything and i don't even see it on my screen. So i don't know if that person is not answering or is on a call.
The same happens when samb calls me and i'm on a call. I receive on the screen a waiting call, but only if i look at it. I don't hear no beeps or any sound that could announce me that i am receiving a call while i'm in a disscusion.
The call waiting option is activated.
How do I solve the problem with the sound notification?
Please help!

call waiting notification depend on the network
for example when i use one network SIM card call waiting notification appear
when i use another network SIM card call waiting notification dont appear

Why dose not see the call waiting notification when other party in a call with some one ?

why dose not see the call waiting notification when other party in a call with some one ?

Because that is not a feature of the iPhone (or of most phones). If someone does not answer when you call, it means they do not want to or cannot talk to you at that time. They could be on another call or they could be simply busy doing something else. Why does it matter which?

Need a code / How to call outstanding notification for a loggined user !!

hi all ,
Need a code / How to call outstanding notification for a loggined user !!
i need to create a service such then when the user logins in he should see the outstanding service..

Hello Prashanth,
1) Goto QMEL table read OBJNR of the notification.
2) Pass the notification number and the language to the function module "STATUS_TEXT_EDIT".
in the return parameter read the parameter LINE, based on the first four characters you can find out the status of the notification.
OSNO - Outstanding notification
NOPR - Notification in process
NOCO - Notification completed
Regards,
TP

Call Minder Notifications never arrive on Orange M...

Call Minder notifications of waiting messages on the home phone fail to arrive on my Orange Mobile phone. Orange claim it is a BT problem . When I redirect my notifications to another mobile carrier the notifications arrive almost immediately. Have others experienced this problem and found a solution other than moving mobile carrier.

I have heard of this before and from memory it is due to Oranges network working in a different way that makes it incompatible with BT
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal?

Hello, I have a problem with my iphone 4 battery, it looses 20% over the night with wifi on and without receiving any phone call or notification. It also uses 1 or 2% each time I check my iphone even if it is just to check up my messages. Is it normal? Please someone give me a solution

Yes this is fairly normal. When you have wifi on the phone, it drains the battery life of the device.
Here is an article that has some tips that you can follow so you can modify the settings on your device to extend it's battery life to the fullest.
http://www.apple.com/batteries/iphone.html

HT201412 After I dropped my iphone 4s my back glass broke and now my screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other source and also tried pushing the home and power button.

After I dropped my Iphone 4s my back glass broke and now the screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other power sources and also tried pushing the home and power button together for about 20 seconds

It's broken due to neglect, namely being dropped. Replace it.

BACD and hold times for Call Queue

Hi Everyone,
Is it possible to include hold times/wait times for BACD call queues? Also, anyone run into issues when configuring BACD and the time it takes for it to ring in? We had an issue previously that where the call would enter the queue, wait 30 seconds or so, and then ring out. Unless this is normal.
Thanks as always,
HelpDesk

Hi Help Desk,
Its been a while since I configured this and I am not sure if the current versions of CCA allow for this change to take place.
I know on the command line that this is possible, but ultimately it would be better to use CCA to make the changes as I am not sure if it would recognize the change if you did it via CLI.
In the past as an alternative to hold times I did some work around's by pushing the BACD to an AA and putting in there some rudimentary options that would allow a user to go back into the line, but they would loose their position in doing so, but this shouldn't be a big problem.
Also in terms of entering the BACD, I havent see the 30 second delay before so I am not sure what is going on there and I cannot say for that that it is normal operations for it.
Cheers,
David Trad.
davidtradconsultinggmail.com

BE6000 Native Call Queuing Design Constraints?

We see the doc wiki has not been updated with any UCM 9.0 native call queuing design constraints. We would assume that the call queuing at a min would need to meet the MoH design constraint of 50 sessions, since you figure there is a high probability that one call will be queued in each of 50 queues with MoH playing with each.
http://docwiki.cisco.com/wiki/Supported_System_Capacities
Is there any other performance impact we should consider or can we ask the doc wiki be updated with design constraints around call queuing?
Can the BU clarify is that is 50 simultanous MoH streams per cluster, or 50 per server? We can eliminate the load by going to multicast and IOS distributed MoH for remote sites, but something tells me there probably is a max queued call ceiling we need to consider for this platform.

At the risk of getting caught up in the pass-by-reference/pass-by-value debate :), simple values (ints chars etc). are passed as values, and modifying them on the C++ side of the procedure call will not modify the values on th java side.
Possible solutions are:
1)pass an array of (say) ints. Then, modifying individual values should modify the java-side values (much in the way that the Stream.read(byte[]) functions do.
2)format up a strin g with your return values, return the string and parse it on the java side.
3)have fields in the java side that are accessed and modified by your native call.
4)pass an object with some fields in it. Have the C++ access and modify the object's fields.
Hope this helps.

No audio with incoming calls or notifications

Hi I have no audio with incoming calls and notifications. I have re booted. My phone, taken the battery out. I have check all volume adjustments, I have done everything. Please need help very frustrated.

Hi,
Would you elaborate the Lync environment about Mediation server part?
Did you enable Media bypass? If so, please disable it and try again.
Please also double check any firewall on the media path blocks the traffic.
More details:
http://technet.microsoft.com/en-us/library/gg398833.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Call Queue Software Options

Hello,
I have alot of customers in the medical field and have deployed UC500's pretty successfully. Does anyone have any suggestions on call queue software that works with UC series really well. The AA does a good job but if patients calling in get VM, the just call back and back, so I am looking for a solution where they wait in a queue, then are transfered to the first availble phone in a particular department, kind of what a call center does. Thanks in advance for any suggestions.

Hi Mark,
One of the tricks I did to get the BACD to be a little more clever was to have its final destination point to the AA, then I set the AA prompts to do the following:
Announcement - "Thank you for continuing to hold, all our operators are currently busy so please choose from one of the following options" (Make this similar to the BACD Announcement)
1. Press "1" to continue to hold (This will send them back into the BACD)
2. If this is an emergency press "2" to speak to someone immediately otherwise dial (911 or 000 or what ever the emergency number is in your region) - Make sure this is pointing to a separate DN on each of the phones and mark it as the emergency extension
3. Or if you wish to be called back press "3" and leave a detailed voice mail and one of our staff will call you back shortly
This is the method I used for various medical center roll-outs, it worked quite well and in fact in some cases worked better than their previous system.
However, Please try and avoid doing this on a live system as it can be a little fiddly to setup, but once it is setup it does the job quite nicely
Cheers,
David Trad.
davidtradconsultinggmail.com

HT1355 If I am playing a song from my phone on speakers, how can I make sure that there are no interruptions like calls or notifications?

If I am playing a song from my phone on speakers, how can I make sure that there are no interruptions like calls or notifications? My students are performing and it would be terrible if there was to be an interruption.

You could turn on Do Not Disturb. This would block all notifications and incoming calls.
Or just turn you're phone's Airplane Mode on if you're not streaming the music

Cisco CUCM 9.1 Call Queuing no Ring Back

I have a customer that has a hunt group that has 6 users in it, they are routing the calls by longest idle. The way the customer handles the inbound call is with the operator-> then they transfer the call to the hunt group. They want to be able to present MOH when they transfer to the hunt group. I enabled Call Queuing for this hunt group and set the MOH source to the customers recording , and work great as long as all agents are busy. When the callers are trasfered to the hunt and agents are available they hear the ringback tones as the call goes from agent to agnet until it gets answered. The customer is wanting to eliminate the ringback tone during the hunt cycle and just play MOH. I know this is possible with UCCX, but they are not willing to purchase UCCX. Is there any way i can silence the ringback tone and have MOH while the call is hunting?

Hi, there is a product intended exactly to do that:
http://www.imagicle.com/go/queuemanager
It extends the embedded call queuing capabilities and is already certified with 9.1, available in solution catalog and also providing advanced historical reporting.
Licensed per channels and not per operator/agent, cheap, dramatically EASY to deploy, config and manage.
Offer a free of charge supervisor app on iPAD and can be combined with the imagicle operator console (http://www.imagicle.com/go/bluesattendant) for a full, professional, out of the box customer service solution.
You can contact imagicle for more info or download the free 30 days eval.
Regards.
Christian Bongiovanni
coCEO and CTO
Imagicle SpA

"Call Queue List" Idea

To the great folks of Apple:
We've all had the experience of using cell phones on the go and not wanting to have to pull over to look up numbers. Sometimes, before I jump in my car, I'll call the 3 or 4 numbers I intend to call one by one, then hang up before it rings. This way the numbers I intend to call are in my "recent calls" list. Why not create a Call Queue List that you could prepare and have them ready to call with the least hassle while you're on the go?
Jim Wilson

http://www.apple.com/feedback/
Regards.

Call queue notification

Similar Messages

Maybe you are looking for