Cannot create "Digital" measuring points on Work Manager 6.0

Hi All,
I am attempting to create "digital" i.e. Pass/Fail measuring points in Work Manager 6.0. I can enter readings as shown below but when I execute a sync, the error message below is shown:
I can use the same measuring point in SAP via IK11 as shown below to create a measuring document using valuation code only. However, the Work Manager requires a numeric characteristic to be added and the "no reading" checkbox to be ticked.
Any help would be greatly appreciated.
Thanks,
Jonathan

Hi Michael,
I tried setting it up with just the two values (0-fail and 1-Pass) and I'm still running into errors. If you could take a look I'd be grateful.
Set up code group with two values:
IK11 allows just the valuation code to be used:
On the device:
As far as I can see this should work but it still creates the same error as previously. Ideally it should work as IK11 and allow the user to select from multiple valuation codes but it appears to still require a characteristic.
One option I tried is to assign a characteristic in addition to the the valuation code and use a 0 reading. This works but is a "workaround" solution in comparison to IK11.
Any help would be really appreciated.
Thanks,
Jonathan

Similar Messages

Why do I get "Cannot create file" message in my download manager when I attempt to install Firefox?

I'm running Mac OS 10.4.11 on a 1.6 GHz PowerPC G5 Mac. I uninstalled Firefox 3.6 from my according to directions on the Mozilla website. And I deleted my Firefox profile folder contained in the Home> Library> Application Support folder. Every time I attempt a clean install of Firefox 3.6.13.dmg, I get the following message: "Cannot create file."

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Cookies#Removing_cookies

I cannot create an Apple ID username or manage my Apple ID account

Hi!
I'm lucky to be able to ask these questions at all: I'm using my father's apple ID at the moment. I tried to ask a question (concerning another problem I'm having) using my own account, but I get stuck in some sort of strange loop: I have to choose a 'username' in order to be able to use the support communities. I enter the username I would like, click 'continue', but then I get the warning: 'an account utilizing this email address already exists. Only one account per email address is allowed on Apple Support Communities.' Yet, I didn't try to create a new account using an email address that is already linked to another account, I merely wanted to choose a username to go along with my existing apple ID. (As a said, I am now using my father's apple ID and the username he made just now while we are trying to figure out what is going wrong and hoping to see whether he would experience the same problems.)
So, upon receiving this warning I go to 'My Apple ID' at the bottom of the screen, I fill in my password, and the screen I'm sent to is again the one where I can create my username. My father doing the same thing on the other hand - he was able to create a username just fine - upon entering his password, is sent to the correct screen where he can edit and manage his personal information (like change his password or the password security questions.)
So basically, I am not able to create a username connected to my own Apple ID, and I cannot even enter the screen where I can manage my Apple ID account. (This is true for both Safari and Firefox (I'm using the latter at the moment).)
It might be an important piece of information that this problem (of not being able to choose a username, not being able to access the communities, and not being able to alter my apple ID) is only my problem and not my dad’s. I can do all those things just fine with his account. Whether it is in Firefox or in Safari.
What could be the problem here?
Help would be very much appreciated!

According to Create an AppleID:
Choose an Apple ID and password.
Enter your primary email address as your Apple ID. This will be used as the contact email address for your account. Please note that this email address must be verified before you can use certain Apple services.
And, unless I'm missing something, it appears that you're trying to use your father's e-mail address. Start at Find your AppleID and see if you can resolve the issue.

Error: you cannot create an internal table as work area

Hi, My code is as follows and when i perform a check it gives the above mentioned error in the select statement.
TYPES: BEGIN OF t_vbrk,
        vbeln            TYPE vbrk-vbeln,
        vtweg            TYPE vbrk-vtweg,
      END OF t_vbrk.
DATA vbrktab TYPE TABLE OF t_vbrk.
SELECT      vbeln
                vtweg
         FROM   vbrk
         INTO vbrktab
         FOR ALL ENTRIES IN xxcvb
         WHERE vbeln       = xxcvb-vbeln.
      INSERT TABLE vbrktab.
    ENDSELECT.
where xxcvb is another internal table with some key values.

Hi
I don't know how you've defined XXCVB, but u should write:
TYPES: BEGIN OF T_VBRK,
         VBELN TYPE VBRK-VBELN,
         VTWEG TYPE VBRK-VTWEG,
       END OF T_VBRK.
DATA: VBRKTAB    TYPE TABLE OF T_VBRK,
      WA_VBRKTAB TYPE T_VBRK.
SELECT VBELN VTWEG FROM VBRK INTO TABLE VBRKTAB
FOR ALL ENTRIES IN XXCVB
     WHERE VBELN = XXCVB-VBELN.
LOOP AT VBRKTAB INTO WA_VBRKTAB.
ENDLOOP.
Max

SAP Work Manager 6.0 - Creating notification on mobile device (customizing the default Start and End date)

Dear all,
When I create a notification in SAP Work Manager 6.0, the notification gets created in the back-end with Start Date equal to Current Date + 1 day and End Date equal to Current Date + 3 days.
Can you advise where I can customize this behaviour, so that the Start Date is for example equal to the Current Date and End Date being 14 days in the future? Is this something that would need to be configured in Agentry Editor or within the ABAP stack?
Many thanks for your support.
Pavel
Tags edited by: Michael Appleby

Hi Jason,
We went this route and identified the initial values, and tried to modify those.
No impact though, as if those values are being overwritten elsewhere (whatever value we set, no change on the backend).
Please see the attachments with screenshots of Agentry Editor.
Many thanks.
Pavel

Functional location in Measuring Point and while creating M.plan or differe

Hi,
we found that functional location in Measuring point and M.plan functional location Measuring point are differrent, how to restrict that one ,we need automatically flow of functional location from measuring point to Maintenance plan.
--Ganesh

Hi,
If you created the Measuring Point for the selected FL, then that measuring point will be populated automatically. If you have more than one measuring point, then you can select using Possible entries option.
In this case, I think its not possible to restrict with configuration.
IPRM0004 Maintenance plan / item: Customer check for time "SAVE"
Use this user exit, while saving check for the functional location for the selected measuring point & give error message.
Use tables IMPTT to get Object Number of FL. Use IFLOT to get the FL.
Regards,
Maheswaran.

Measurement range limits in creating measuring point

Hi,
i'm creating a measuring point where i need to enter the measurement range limits i.e upper range limit and lower range limit.
Can anyone let me know where exactly the values are getting stored i.e table
or any function module available to get lower range limit and upper range limit
Pls let me know if anyone has any idea
Thanks

Hi Taran,
Could you please tell me how did you load the Upper and Lower limit range for measuring points...
Thanks,
Geetha

BAPI to create Measurement Point

Hi all,
Can anyone tell me the Bapi to create Measurement Point.
Thanks
Sanket sethi

Do you want to create a measuring point or a measurment document ?
Measuring points are generally predefined in the config, we can create a measuring document for these measuring points by using the FM :ALM_ME_TOB_MEASRMNT_DOC_CREATE

How to control the authority of measuring point when creating

hi,expert
I want to control the authority of the measuring point when creating the measuring point in Ik01.That is I can check the authority object of the measuring point object (equipment of function location) when I create .The sandard system can only provide the authority check of T-CODE and AuthorizGroup. On the other hand there is no customer-exit to do this .Please give me a solution .
Thank you
Edited by: Fengxi Zhao on Dec 17, 2008 8:35 AM

Dear Sir
Can you clearify the requirement in detailed? What exactly you want to prevent & You want to authorise for ??
Regards

How can I create User Entered Additional Data Points in Credit Management?

I currently have a requirement to create additional data points in Credit Management (11i) that require a data analyst to input the value so that the score can be calculated.
For example: Does customer have a Qualified Audit Report?
If YES = +10 points added to score
If NO = 0 points added to score
I was able to add an additional data point and the case folder was assigned to an analyst, however when opening the case folder to input the missing data, the additional datapoint was not included in the case folder. Does anyone know what I may have missed in the setup?
Data Point was defined as follows and added to a checklist called TEST.
Data point: Unqualified
Category: (none)
Parent: (none)
Application: Receivables
Scoreable: Y
Enabled: Y
PL/SQL Package: (none)
Function: (none)
Thanks in advance.
Shauna
Edited by: sphelps on Sep 22, 2011 8:29 AM

The setup described above was correct. The datapoints did not show up in the case folder until the next day. I am assuming that maybe the changes required a bounce or a background process of some sort.

Measuring point Not on device

Hi ALL
We are on MI 7.1.
We are facing an issue with Measuring points. During the first sync the Measuring points were downloded to the device.
We created new Measuring points in R/3 and these new ones are available on the Middleware but on the device.
The Funct Locations linked to these Measuring points are available on the device. There are other Measuring points available for these Funct. Locations ( downloded during the first sync) but the new Measuring points are not available on device.
Did someone came across this issue, what can be the reasons behind this?
Regards
Manish bansal

Hi
The query is resolved.
I have to run the program MEREP_REPLICATOR_START for Funct. Location also.
After running the program it worked.
Regards
Manish

Measuring Point - remove characteristic

Ladies and Gents,
I have created a measuring point and have assigned a characteristic to it. I have then saved it and went back to change mode. I cannot seem to change the characteristic anymore as the field is grayed out. I have checked the config and all the menus and cannot see a way of re-enabling that field.
Could someone please provide some guidance on how I could change / remove the characteristic on a measuring point?
Thanks
Mantas

thyagarajan,
I seem to be reaching the same conclusion after numerous discussions with my colleagues. Would you have a reference to documentation somewhere to support your conclusion?
Keshav Reddy,
Either:
1. Create a measuring point (IK01) setting a numeric characteristic.
2. Modify an existing measuring point (IK02) - characteristic field should be grayed out.
My question was - why is this field grayed out and how could we go about removing the characteristic / modifying it without having to modify the entries in the database tables.
Kind Regards,
Mantas

Accepting date as a measuring point

Please guide as to how does one accept date field as an input in measuring points.Have made a characteristic with date format,yet while creating a measuring point with the said characteristic , displays an error
" Only characteristics with a Numerical format can be used "
awaiting an early reply,

Hi pshthecoolest ,
You cant declare DATE with Date format as Characteristics , as per Std SAP.
Work around will be Create Char CT04 DATE , with Numeric format with Template (8), assign appropriate unit of Measurement , that you need to create separately t code CUNI.
But above all why you required to put reading as a Date in measuring point ?
Riyaj
Edited by: riyajmaner on Feb 8, 2011 12:51 PM

Early allocation of numbers to Measuring point

Hi all,
While creating the measuring points, the system generated internal numbers get alloted to MP, though in creation stage.But I have not saved the MP and came out of the transaction. But my number got wasted and when try to create new MP a new number is getting alloted. How to prevent this?
((I don't want to lose numbers as these are in symmetry for two different systems and has to be corelated by us , as & when required.))
I didn't find any thing in customizing (like what we have for notification-early number allocation).
Please reply.
Raj

Hi,
You cannot adjust this through customizing, measurement document numbers are always issued early. If document not saved then that number is lost. Buffering can also cause gaps to occur in the number range.
See note [307437|https://service.sap.com/sap/support/notes/307437] for a full explination on measuring document numbers. See note [62077|https://service.sap.com/sap/support/notes/62077] about buffering.
-Paul

Maintenance Order through Measuring Point

Dear all,
I want to know whether it is possible to create the maintenance order on the basis measuring point .
I know how to create the order on the basis of measuring counter.
Is there any procedure to create the maintenance Order through measuring point as done in case of counter?
kindly provide the solution for Creation of Maintenance Order using Measuring Point..

Really very thanks for the solution.
I have one more query, we can create the measuring point using the t.code IK01.As you told we have to create the measuring point with upper and lower range.
Is that we have to create 2 measuring point for upper as well as lower range or in one measuring point it is possible to accumulate both the upper and lower range.
If it is possible to accumulate both the upper and lower range in one measuring point then kindly provide the procedure.
Thanks in advance.

Cannot create "Digital" measuring points on Work Manager 6.0

Similar Messages

Maybe you are looking for