CF Enterprise Upgrades

I have CF 9 Enterprise on server A. We have nice new shiny server B and would like to install CF 10 Enterprise Trial Version on it. If we discontinue use of server A, can we upgrade to CF 10 Enterprise on server B from trial version without having to re-install CF 9 Enterprise and upgrade to CF 10 Enterprise?

Hi splendorx,
Yes, you can upgrade to CF10 enterprise, after discontinuing it from first server. You need to re-install CF9 on the new server.
Regards,
Anit Kumar

Similar Messages

SAP R/3 4.6B to SAP Enterprise UPGRADE landscape methodology

My primary question involves the upgrade landscape and its relationship with SAP's E-Buyer system.
We're upgrading R/3 in Q2 of 05. In all past upgrades I've done, I've used parallel landscapes; the existing DEV -> QAS -> PRD landscapes stays the same (for Production support throughout the upgrade process). However, since my last upgrade, we've implemented SAP's E Buyer application.
I do not think it's possible to maintain Dual E Buyer landscapes. This because of the configuration that's in our R/3 PRD environment that's dependent upon our EBP Prod system. It's all based on 1 logical system. Also, our E Buyer system was implemented in the CLASSIC scenario. Thus P.O.s are cut in R/3. This means that a symbiotic relationship exists between R/3 and E Buyer. Thus, critical E Buyer config is dependent on R/3 4.6b; it can't just be pointed at "the new R/3" AFTER the upgrade.
I believe the only way to upgrade now is to FREEZE E - Buyer and R/3 development in the "old" 4.6B landscape. In fact, I believe we have to come to the point in E Buyer and R/3 environments where the development landscape is "synched" i.e. all E Buyer Prod transports are in EBP PROD. This point has to be just prior to upgrading R/3. At that point, nothing short of a Prod break fix happens in the "old" landscape.
At that point in time, we simultaneously copy back Production R/3 to DV2 (where the R/3 Enterprise upgrade will occur) and E Buyer Prod to the EBD system. i.e. all post upgrade E Buyer-required work is done in EBD with the same (original) logical system.
It's important I understand this because my apps people are telling the business they can have multiple projects occurring in the "old" R/3 system landscape as well as E Buyer Development occurring concurrently to an R/3 Enterprise upgrade.
I don't see how that's possible.
To me, all new projects should occur in the UPGRADED landscape and be delivered at Prod cut over. Is there something I'm missing? I need to keep the business happy but being a Basis guy, I just don't see how they can have their cake and eat it to.
Any suggestions?

Hi there!
I've done the same task in the very same type of Upgrade, I hope I can help you. SapScripts are not much affected by Unicode. You should check that the code (programs and functions) do not have any Unicode inconsistencies, by theese I mean not mixing type C with type X, not making assignments between variables of different structure and a lot of unimportant issues you will find, but I assure you they are very easy to fix. Just activate the unicode check and then check the syntax of the object.
Regards,
Pablo

Windows 8.1 to 8.1 enterprise upgrade; How to keep Keep Windows settings, personal files, and applications?

Hi,
I am doing an upgrade for a customer from windows 8.1 to 8.1 enterprise via ISO,
according to Microsoft TMB, you can save settings, personal files, and applications doing the upgrade, see http://technet.microsoft.com/en-us/library/jj203353.aspx#EightOne
However, when I am trying to upgrade from 8.1 (same language, same architecture),
I only get two options:
1. Keep personal files.
2. Nothing.
(see screenshot).
Why is that? what am I doing wrong?

Yes. Please see:
Add features: FAQ
Windows 8.1 Pro Pack
Carey Frisch

Will Windows Vista Ultimate upgrade using Win 7 Enterprise Upgrade

My pc is currently running Windows Vista Ultimate 32 bit. It was running 64 bit originally, but because of certain business applications that only ran on 32 bit, we had to downgrade to 32 bit. By the time they got the programs updated, it was
too late (cost and time-wise) to return to 64 bit version.
I recently purchased Windows 7 Enterprise 32 bit, because a Microsoft technical support person told me that Enterprise would be the upgrade to use. When I recently read "Windows 7 Upgrade Paths" it appears this is not the case. Will
I be able to upgrade from Vista Ultimate to Win 7 Enterprise, as I was advised? If not, then Microsoft just cost me a lot of money!!
Thanks
Dave

Hello Dave,
Based on my research, Windows Vista Ultimate can’t upgrade to Windows 7 enterprise.
For more information, please take a look at the following article about Windows 7 upgrade path.
https://technet.microsoft.com/en-us/library/dd772579(v=ws.10).aspx
Windows Vista Ultimate can only upgrade to Windows 7 Ultimate.
Please contact the support to check if you can return the Windows 7 enterprise. For more information about return, please take a look at the following article.
http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpReturnsRefundsPage
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

R/3 4.7 Enterprise upgrade to ECC 6.0 EHP4

Just want to ask anyone here who has done the upgrade from r/3 4.7 to ecc 6.0 inclusive of ehp4 - is the upgrade runtime extended/longer compared with the upgrade just to ECC 6.0 SR3 ?
I've personally executed an EHP4 installation using SAPehpi and the end to end time execution is really long and. Some background - we are deciding if we would want to include EHP4 during the 4.7 upgrade or to apply EHP4 separately once the upgrade is done, the downtime is of concern here as we are limited to just the weekend.

Hello Thom,
We did upgrade of R34.7 to ECC 6.0 SR3 EHP3 and we were able to complete this one day downtime. I am not sure about EHP4 but it should not take much longer. I beleive you should be able to accomplish this in weekend.
My suggestion is to do a system copy of PROD to a sandbox and perform test upgrade. By doing this you will know
1. what issues you will have during actual upgrade
2. Tunning that you can do to reduce downtime.
3. SPDD/SPAU adjustments can be evaluated.
By repeating couple of iteration on sandbox. You can estimate what would be your downtime and what you can do to reduce it.
Regards,
Praveen

Will BEx Broadcaster Licenses work in BO Enterprise (upgraded from BEx) ?

Hello all,
We are currently using BEx tools for BI Impl. We know that we require licenses for BEx Broadcaster. If we upgrade to Business Objects Platform can we utilize the same Broadcaster licenses or we would require fresh licensing ?
Thank you for your time.
Regards,

Thanks Denis,
Is there any document available covering licensing suff ?
Regards,

Digital Publishing Professional vs Enterprise (Upgrade to Enterprise)

We currently have the professional version of adobe digital publishing suite and offer the ability the purchase single copy and 1 year subscription to the magazine. We would like to carry of this functionality for customers who have purchased previous issues and subscriptions.
Do you know if it is possible to offer the following ways or purchasing subscriptions with Enterprise.
1. Single Issue
2. Subscription
3. Full access using login that is connected to our subscriber backend

Yes, you need to implement the direct entitlement API and build an entitled app. Enterprise version is required.

Upgrade to Enterprise version?

Hi,
I recently purchased a workstation with Windows 8.1 Pro and software assuance. I have the computer built up and have been using it for a month or two now, working fine. I was just looking over my licensing in the Volume Licensing Service Center
and noticed an entry for Windows 8.1 Enterprise with an unresolved quantity of 2.
I'm thinking I paid for it so I may as well use it, right? Plus I'm curious about Windows To Go. But my question is, can I upgrade my Pro machine to the Enterprise version without having to re-install all my applications? I'd
hate to have to reinstall all my applications.
I did find an article online on how to do this but it called for running an application, Windows Anytime Upgrade, but I can't find it on my system. Any other thoughts or where can I find this utility?
Thanks in advance,
Linn

Hello,
for my Information, You cannot upgrade to Windows 8.1 enterpise and keep Windows settings, personal files, and applications from the Windows 8.1 pro Edition while on the VLSC you can only dowload th efull wind 7 Enterp license without possibility to
use Windows Setup upgrade Feature.
on the same link from Milos you can see the diference between Upgrade to Windows pro and the upgrade to Windows Enterprise:
Upgrade to Windows 8.1 Pro: You can upgrade to Windows 8.1 Pro and
keep Windows settings, personal files, and applications
Upgrade to Windows 8.1 Enterprise (Volume License): You can upgrade to Windows 8.1 Enterprise (Volume License) from the following operating system Editions. by the Enterprise Edition,is NOT
mentioned that: You can upgrade to Windows 8.1 Pro and keep Windows settings, personal files, and applications
thanks
diramoh

Enterprise multiserver option missing during install

Hello,
I've been asked to install Coldfusion 10 Enterprise on a server.
We have a Coldfusion 10 Enterprise upgrade key.
I'm having a hard time to find a place at adobe.com to downlaod the install file.
Finally I downloaded the trial, hoping it would also be the enterprise version after entering the key.
From previous installation documentation of our Coldfusion 8 and 9 servers, during installation, after the screen where the serial is eneterd, I expected to get a screen where I can choose 1.Server configuration 2. Enterprise multiserver configuration or 3. J2EE configuration.
With the downloaded ColdFusion_10_WWEJ_win64.exe I only get the choices Server and JEE.
Do I have the wrong download, or is the Enterprise option left away in the Installation wizard?
Regards,
Han

Hi
Welcome to Adobe Forums.
Instead of JRun, Tomcat is embedded with a stand-alone ColdFusion 10 installation. Previous versions of ColdFusion installer allow you to create multi-server installations whereas ColdFusion 10 installer lets you only install stand-alone installation. After installing ColdFusion in stand-alone mode(server configuration), you can create multiple instances and clusters, provided you have an Enterprise or Developer license.
So in CF 10, you will only find 2 options : 1.Server configuration 2. J2EE configuration.
http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf363c31-7ff 4.html
Thanks
VJ

Oracle Database on Windows Upgrade

Hi
Could you please help me on this....
We are having nearly ten Oracle 10.2.0.4.0 databases on Windows 2003 Standard Edition 32 bit server...We got a request from client that OS to be upgraded to Windows 2003 enterprise Edition 32 bit ......
Windows 2003 standard to Enterprise upgrade....so, is there any thing to be done from DB side?????? we can go ahead by keeping db related services down or any thing to be followed? Please help me on this....
Thank you....

user7239280 wrote:
Hi
Could you please help me on this......
Thank you...Patience, Grasshopper.
You posted this plea a mere 37 minutes after your original. This is a global forum of volunteers. No one is paid to monitor and respond, and the person with the information you seek may very will live 20 time zones away from you and went to bed just as you were posting. Your posting went up in the middle of the night for half the world. No one is deliberately withholding information until such time as you sound sufficiently desperate. Give it at least 24 hours, and if you have no response by then, assume that no one knows the answer.

8520 Enterprise OS5

Hi, this is my dilemma... im using an 8520 on BES, the device is running OS4.6 my BES admin has told me that their is not an OS5 enterprise upgrade available so I can't install BB Bridge so I can use my playbook for work.
So can anyone answer....
Is there an OS5 enterprise upgrade??
Can you side load BB Bridge on to a 4.6 device
If so where can I find the file
Or am I going to have to sell my playbook

To be honest I was a little surprised when i was told it had to be an enterprise OS.... I was sat with him when he tried to update it via the BES and it just stated that no update was available, I've tried to do it via desktop manager and again it says no update is available.. they have raised a support ticket with RIM so I guess I just need to wait an
d see :-/

Corporate upgrade path to windows 10?

You should still buy one 10 Pro volume license for the re-imaging rights. Until someone says otherwise, you would need to install 7/8 Pro, upgrade in-place and accept the new EULA, then you can re-image the device (or just stick with the upgrade).

So about a year ago my company dropped its volume licensing agreement with Microsoft. All of our computers we order come with windows 7 pro pre-installed and licensed for windows 8 pro. However, because we have already over bought on our volume licensing when we ordered, we are still deploying our image with windows 7 Enterprise. We do not have licensing for windows 10 under the now cancelled agreement, only windows 7 & 8.Anyhow, so I can't use the enterprise upgrade path to 10, so I must use windows 7/8 and then upgrade to 10, THEN I can wipe it to do a clean install of windows 10. Is that correct? Can you make an Orchestrator playbook to install windows 7, upgrade to 10, then format and install windows 10 clean? I know that seems like a lot of fuss to just get windows 10, but it would be free as we have already paid for the licenses...
This topic first appeared in the Spiceworks Community

Enterprise deployment of Firefox 3.6.x to 4.0

We are trying to perform an enterprise upgrade of Firefox from 3.6.x to 4.0.
Where can I get the necessary files for me to push this upgrade in my enterprise.

Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Cannot open any library documents with MS Office

I recently starting using Beehive. I am a user, not an administrator. I uploaded a bunch of documents to a new workspace I just created. Now I want to open them for viewing and editing. When I try to open any MS Office document (Word, Powerpoint, Excel), I get a message "Access to this web server is disabled by default because it is controlled by basic authentication and does not use Secure Sockets Layer (SSL). Do you want to search the Microsoft Online Support Center to view possible solutions?". I click on "No", and then nothing happens. The applicaiton is open, but no file is never displayed.
I have had this message before when opening documents from MS Project Server 2010 library, and always click "No" and then the document opens regardless. It also prompts me for the username and password for the Windows Server where MS Project Server 2010 is installed. I am not being prompted for that when I launch the document from Beehive. However, the MS Project Server 2010 server is located on our side of the firewall. This Beehive server is a shared government server located outside our dept firewall. BTW, I have no issues opening PDF files.
A workaround is to drag and drop the document onto my desktop and then open it. Not very efficient, but it works. I have tried adding the website as a "trusted locations" but can't add the URL. Is this a function of MS Office, a function of our Webwasher, or is it something that must be done on Beehive?
Thought this might be a useful way to do team collaboration across several government depts, but won't do me any good if I can't open and edit the documents I store on there.
Trish :)
Edited by: 941034 on Jun 15, 2012 12:14 PM

I am having the same problem with UCM 10gr3. Our desktop engineers are doing an enterprise upgrade of MS Office to 2010 and this issue just surfaced. Trish, how do your users authenticate to Beehive? We are using a cusom connector using our AD.

(Current Build: 9841) PC Settings - Preview Builds - Download Now - Failed to download new preview build, please try again later. 0x80246017

Hey ,
I hope someone can help.. been trying to upgrade from 9841 to 9860 for the last few days.. and I cant seem to get the preview build download part to work..
Seems like "80246017 Flight Settings Failure Content Download Error: Download failed" is the main error (more logs below)
And it doesn't seem like(from other blog posts) there are any manual downloads (ISO, .EXE's) so I'm stuck.
I know I could possibly do a full "clean" re-install of 9841 and then upgrade to 9860 but I really want to find out why its not working..
Cheers
OS Information
System Model MacBookPro8,2
Dual Boot (Boot Camp 5.1): SSD 256GB (Part 1: 128GB OSX - Part 2: 128 GB for Win 10 - 36GB Free)
OS Version 6.4.9841 Build 9841 - Windows 10 Technical Preview (Not Enterprise) - Upgraded from Windows 8.1 Pro (Not a fresh Win 10 install)
Registry Keys (Not altered):
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    BranchName = fbl_release
    ThresholdRiskLevel = low
Have deleted
C:\Windows\SoftwareDistribution
and restarted Windows Update service (Did not seem to fix anything)
Done a full disk cleanup (including windows.old and deleting the hidden C:\$Windows.~BT  )
Done a "Refresh your PC without affecting your files" (like a re-install). Still no luck =(
Other Known Issues:
Had to manually "Activate" Tech Preview via "SLUI 4" (did not activate from 8.1 pro upgrade which was fully activated)
Errors:
Event Viewer:
Fault bucket 90636031462, type 5
Event Name: WindowsUpdateFailure2
Response: Not available
Cab Id: 0
Problem signature:
P1: 7.9.9841.4
P2: 80246017
P3: 40B05ADC-889A-4231-8D8F-08ECAC4877D5
P4: Download
P5: 101
P6: Unmanaged {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
P7: 0
P8:
P9:
P10:
Attached files:
C:\Windows\WindowsUpdate.log
C:\Windows\SoftwareDistribution\ReportingEvents.log
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.9.9841.4_3ae9e0cedd6cb54a2e4f6bdb3aac59589de75a2_00000000_188baf37
Analysis symbol:
Rechecking for solution: 0
Report Id: 15049fa0-5c05-11e4-bf8d-c82a14163a15
Report Status: 0
Hashed bucket: fb06acb92fae6660e76e50140079e85a
C:\windows\WindowsUpdate.log
2014-10-25 12:56:05:493 1000 1328 AU Number of updates for list 0: 1
2014-10-25 12:56:05:493 1000 1328 AU   ServiceId = {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}, UpdateId = {40B05ADC-889A-4231-8D8F-08ECAC4877D5}.2, State = 'Download Failed'
2014-10-25 15:48:53:524 1000 3c0 AU AU received event of type: 3
2014-10-25 15:48:53:524 1000 3c0 AU AU received Redetect event for prune-only scan of 117CAB2D-82B1-4B5A-A08C-4D62DBEE7782 service, but skipping since there are no active cached updates
2014-10-25 15:48:58:528 1000 1444 Report Writing 1 events to event cache.
2014-10-25 15:48:58:532 1000 1444 Report Created new event cache file at C:\WINDOWS\SoftwareDistribution\EventCache.v2\{4E983ABD-936A-4302-A5C3-5AF90C199EAD}.bin for writing.
C:\Windows\SoftwareDistribution\ReportingEvents.log
{1A92C0D7-AD2E-43BA-8077-4FE8B23EF830} 2014-10-25 15:48:53:525+1100 1 147 [AGENT_DETECTION_FINISHED] 101 {00000000-0000-0000-0000-000000000000} 0 0 Flight Settings Success Software Synchronization Windows
Update Client successfully detected 1 updates.
{97699AF3-1EFF-46D1-A548-201B63749B39} 2014-10-25 15:48:56:326+1100 1 161 [AGENT_DOWNLOAD_FAILED] 101 {40B05ADC-889A-4231-8D8F-08ECAC4877D5} 2 80246017 Flight Settings Failure Content Download Error:
Download failed.
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.9.9841.4_3ae9e0cedd6cb54a2e4f6bdb3aac59589de75a2_00000000_188baf37
Version=1
EventType=WindowsUpdateFailure2
EventTime=130586873635223877
Consent=1
UploadTime=130586873636179832
ReportIdentifier=15049fa0-5c05-11e4-bf8d-c82a14163a15
Response.BucketId=fb06acb92fae6660e76e50140079e85a
Response.BucketTable=5
Response.LegacyBucketId=90636031462
Response.type=4
Sig[0].Name=ClientVersion
Sig[0].Value=7.9.9841.4
Sig[1].Name=Win32HResult
Sig[1].Value=80246017
Sig[2].Name=UpdateId
Sig[2].Value=40B05ADC-889A-4231-8D8F-08ECAC4877D5
Sig[3].Name=Scenario
Sig[3].Value=Download
Sig[4].Name=SourceId
Sig[4].Value=101
Sig[5].Name=Environment
Sig[5].Value=Unmanaged {117CAB2D-82B1-4B5A-A08C-4D62DBEE7782}
Sig[6].Name=LastError
Sig[6].Value=0
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.4.9841.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=2057
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Windows Update installation problem
ConsentKey=WindowsUpdateFailure2
AppName=Host Process for Windows Services
AppPath=C:\Windows\System32\svchost.exe
ReportDescription=A Windows update did not install properly. Sending the following information to Microsoft can help improve the software.
ApplicationIdentity=00000000000000000000000000000000

Hi,
I had this same issue and tried many things to fix it. I finally found a fix with a small registry edit.
Open command prompt under admin and follow these steps (which I found here:
http://answers.microsoft.com/en-us/windows/forum/windows_tp-winipp/error-code-0x80246017-when-trying-to-download-new/b188df4f-8e7a-443a-b584-61c4d59407d8)
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability" /v "BranchName" /d "fbl_release" /t REG_SZ
/f
reg add "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability" /v "ThresholdRiskLevel" /d "low" /t REG_SZ /f
reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability" /v "ThresholdInternal" /f
reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability" /v "ThresholdOptedIn" /f
After you have done that open regedit and navigate to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
If there is a folder called "recovered from" delete it. Then open up Windows Update in PC settings and go to preview builds and click Check Now
This worked for me. Hopes it works for you to.

CF Enterprise Upgrades

Similar Messages

Maybe you are looking for