Change CUCM end User, no AD integration

We have CUCM (7.1.5.32900-2), we do not have Active Directory integration,
Is it acceptable practice if a user leaves, to just change the name on the End User config within CUCM, (setting up for use as a CAD agent), rather than deleting and creating new from scratch?
Everything stays the same on the End user except the name.
Or is the preferred method to delete existing user and creat a new one?
I realize if I change the name, I should delete the old resource in UCCX.

Hi Wilson,
Please go through the below section.
Implications of Deleting Agents in Unified CM
Note     This section only applies to Unified CCX Deployments with Unified CM.
If you modify an agent's record in Unified CM (for example, changing the Unified CCX extension or deleting the agent),ensure to refresh the user page on Unified CCX Administration interface so that the agent's information in the Unified CCX RmCm subsystem is updated. Choose Subsystems > RmCm > Resources option to update the Unified CCX information in the Unified CCX Administration any time. If you change the Unified CCX extension of an agent who is currently logged in, the agent will continue to use the old extension until the agent logs off. The agent must log off and then log back in to the Cisco Agent Desktop to get the new extension.
When Unified CCX detects that the agent no longer exists in Unified CM, it does not automatically delete that agent from the Unified CCX database. Instead, the Unified CCX Resources page displays a new link called Inactive Agents. When you click this link, Unified CCX displays a list of agents deleted from Unified CM but still existing in the Unified CCX database. In this case, select the agents to delete from Unified CCX by checking the check box next to the required agent (or select all agents for deletion by clicking Check All). Then click Delete to remove the selected agents from the Unified CCX database. Unless you follow this procedure, agents deleted in Unified CM will continue to appear in the agents list in the Unified CCX Resources page, but they will not be able to log in as the Unified CM authentication will not be successful.
Caution        
Deleting Inactive Agents removes the agent details and records from the Historical Reporting Database and HR reports will not display historical information of these agents.
If Unified CM connection errors have occurred, all agents will not be visible to Unified CCX. In this case, Unified CCX interprets these agents as deleted agents. As a result, the Inactive Agents list will not be accurate. When the errors are resolved, click Inactive Agents again to see an accurate list.
Hope it helps.
Anand
Please rate helpful posts..

Similar Messages

  • CUCM End User Administration

    Our Helpdesk staff performs the basic functions of add/remove phones and add/remove users from CUCM.  We've just upgraded from CM 4.2 to CUCM 8.5(1).  We are using the integrated CUCM LDAP and not AD integration.  My Helpdesk users are able to use the User/Phone Add option to create a new phone and a new CUCM End User.  They are able to edit all the necessary properties of the phone and line settings.  But with their current group/role memberships they are unable to change attributes of users or to be able to delete them.  The only Role I can see to add them to that allows changes to End Users is Standard CCMADMIN Administration and the only User Group is Standard CCM Super Users.  Both of those give far more rights than I would like Helpdesk staff to have.  Am I missing something obvious to allow them to perform End User management?  Has anyone else encountered this?  Below are the groups/roles my Helpdesk staff are currently part of.  Any help would be apprecitated.
    Bryan
    I've added the users on our Helpdesk to the following Groups:
    Standard CCM Admin Users
    Standard CCM End Users
    Standard CCM Phone Administration
    Standard CTI Enabled
    Standard RealtimeAndTraceCollection
    Which automatically adds them to the following Roles:
    Standard CCM Admin Users
    Stadard CCM End Users
    Standard CCM Phone Management
    Standard CCMADMIN Read Only
    Standard CCMUSER Administration
    Standard CTI Enabled
    Standard CUReporting
    Standard RealtimeAndTraceCollection

    Bryan,
    If I remember correctly, there isn't a pre-canned role that will allow for End User administration. I don't know why.
    Your best bet is to create a custom Role and User Group. This way, you can give your Helpdesk exactly the access they need. The descriptions for the Role permissions are pretty self-explanatory, so it should be pretty easy to accomplish.
    Steps:
    1) create new role
    2) assign permissions to the new role
    3) create a new User Group
    4) assign the new Role to the new User Group
    5) assign the new User Group to the End/Application User accounts for the helpdesk.
    This maybe helpful: http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/admin/8_5_1/ccmsys/a02mla.html#wp1062944
    HTH
    Adam

  • Unity Connection 8.5 not import CUCM end users after reinstall

    I needed to reinstall a Unity Connection 8.5 server (server crash due to power failure).
    After the reinstallation and reconfiguration of the CUC, the same does not synchronize and / or import users from CUCM (version 8.5).
    The CUCM is integrated with LDAP.
    The version of servers are:
    - CUC = version 8.5.1ES16.11900-16
    - CUCM = version 8.5.1.11900-21
    Before CUC crash, I could import users usually.
    The test in AXL servers in CUC is normal: (Test message successfully sent to AXL server 172.16.21.11:443).
    Any sugestions?
    Regards,
    Ronaldo Gama

    Hi Ronaldo,
    This is because the CUCM actually holds a database where all of these users are still tagged as being imported into UC already.  You'll have to get fancy with some SQL queries, you can try these, but do it at your own risk.
    Open SSH to the CUCM
    1) For each user, find the mapping row:
              run sql select pkid from enduserappservermap where fkenduser in (select pkid from enduser where userid = 'my_user_alias') and fkappserver in (select pkid from appserver where ipaddr = 'my_connection_server_ip')
    In the query above, replace my_user_alias with the alias of the end user and replace my_connection_server_ip with the IP address of the Connection server (or whatever the old Connection server IP address may have been if you changed it after the rebuild).
    2) Delete the mapping row:
    You should only get back one row. Delete it. Replace my_pkid with the actual pkid that you got back:
              run sql delete from enduserappservermap where pkid = 'my_pkid'
    Try to import that user again via AXL.  That's the user by user way of doing it if you don't have too many, but if you're confident they all can be deleted at once you can do the following:
    1.  Find all of the users mapped
               run sql select * from enduserappservermap
    2.  The users should all have matching value in the "fkappserver" object ID column if they were mapped to the same pre-existing Connection server.  Once you've confirmed the "fkappserver" object ID of the old UC server, issue the bulk delete command, this is irreversible!
              run sql delete from enduserappservermap where fkappserver = 'fkappserver_for_old_UC'
    Hope that helps,
    Brad

  • How to create a PDF form which can be filled out and saved with change by end user

    I am using Acrobat 8.0 - Mac - and want to create a PDF with text form fields. Simple one page file. The end user needs to be able to fill out the text form fields and SAVE those changes. so far they can fill out the fields but can not save the file with changes.
    Thanks

    Sandee Cohen wrote:
    Phillip Jones said:
    After the uproar from Users about Standard being little more than Apple's Print to PDF; there hasn't been a Standard version for Mac since version 6. So many people were use the features in Acrobat 5  to create Forms that could be filled out by Reader. when the bought 6 Standard they were ready to hang the CEO of Adobe in effigy. When 7 came out is was Pro only.
    I'm confused.
    The current version of Acrobat comes in Standard, Pro, and Extended Pro versions. Only the Pro version is on the Mac. But that doesn't mean that the Mac community wouldn't have wanted the Standard version of Acrobat.
    The Standard version is hardly a mimic of Apple's Save to PDF. The most important features of Standard is to enable Rights in Reader as well as add comments, form fields. etc.
    The only thing that Standard does do are the pre-press and production features of Pro.
    However, given the difference in price ($450 vs. $300) there is ample reason for business on the Mac OS to buy Standard--if they could buy it.
    I didn't say PC users.
    I should have said Mac users. Because the Print system and sytem by which Mac users view anything is based on the PDF engine. The Mac sytem can do anything Standard Standrd could do. although in order to placate Adobe the pdf engine used is a version or two behind. If the Mac OS could do everything Acrobat could do there would be no reason for Adobe to provide Acrobat Or Reader for Mac.
    And you basing your assumption of what Standard can do a PC. Standard on Mac is basically Mac's Print to PDF  wrapped in an Adobe Package. It shad no ability to confer rights to reader (that didn't come to Acrobat Mac until Version 8) and was unable to to create forms. The current version of Acrobat PC comes as Standard, Pro, And extended. There never has and never will be an extended pro version for Mac (that adds the ability to create XML based forms) They don't have the interest. To adobe is little more than a Play toy. Because Windows has so much clout They can dictate what they want. Apple not so much. One advantage Mac does have is that Forms creator is built in. on PC its an adon (it free but an addon or was).
    Now back in OS 9 days and Acrobat 5.x Acrobat for Mac and PC were equal. except to have the print press features Mac users had to pay an addition $200.00.  (It exactly as you described in your last sentence - except Acrobat 5.x without the printpress and The Acrobat 5 without Print press was $299.00 and $499.00 with Print press.) I know I've used Acrobat since version 3.

  • No " Find " Button in CUCM End User Configuration

    Hello Community, we have two different 8.6.2 CUCM with the same Version.
    I visit the two CUCM w/ the same PC and Browser. I go to End User Configuration and Edit one of the Users. I do this on both of this CUCM. At one of the  CUCM I see the "Find Buttons" to search for example " Controlled Devices " and at the second CUCM no Find Button there. It is at more Configuration points in End User Configuration and not depend from the End User. The CUCM Version is exactly the same!
    Andy Idea appreciate!
    Really Thanks Armin
    HTH, please rate all useful posts!       

    Hi Jaime, Really thanks for your support and effort. It should be right!
    Please see the count of entrys :-)
    w/ the find button we have near 36.000 device profiles entrys
    w/o find button we have 38 device profile entrys.
    I can´t find anything in srnd etc.... regarding the limit.
    For doublecheck I would increase the count of Deviceprofiles.
    From which limit the "find button appears"?
    HTH, please rate all useful posts!

  • Header text change in End User Logon page

    Hello All,
    Could you please let me know where can i change the Header text of End User logon page which is SAP GRC Access Control, 10 to an different description.
    Thanks in advance.

    Hi Abhi,
    Go to SE80
    Go to Package GRAC_ACCESS_REQUEST -> Web Dynpro -> Web Dynpro Application -> GRAC_UIBB_END_USER_LOGIN
    Open the webdynpro in Admin mode and then right click on the page and you can Edit whatever text you want in End User Logon page as well as can enable and disable fields according to your requirement.
    Regards,
    Madhu

  • Accessing Work Items assigned to other users from end user page

    Hello Experts,
    We are using Sun IDM 6.0 SP1 at our client place. Most of the applications integrated with IDM are manually provisioned, in the sense, once after all the necessary approvals are received the request will be assigned to a group of provisioners, they will manually connect to the requested application and create the account in native system. There are more than 100 such provisioners in the organization.
    Current design is to assign a work item to all the provisioners (like Multi approval) and once a provisioner assigns the request to himself then the corresponding work item will be taken out from other provisioners approval queue. These provisioners login to end user page of Sun IDM to access their approval queue as only the end user page is SSO enabled.
    Because of the large number of requests in the system (more than 50k) and each request having 100 work items, the number of work items in the system is huge and thus the performance of the system is very poor so we are working to change the design to bring down the number of work items in the system.
    Customer is not convinced to have a dedicated person who can get all these work items in his queue and assign it to the appropriate provisioner, they are looking to have a solution something similar to the current one in which all the provisioner can see all the requests in the system and they can pick from it and assign to them.
    So we are thinking to create a generic id in the system and assign all the work items to that id, and make changes to the “end user work items list” file so that all the provisioner can see the work items that are assigned to them as well as that generic id.
    But for some reason I’m not getting the work items assigned to other users in the end users page. I have tried assigning all the capabilities to logged in user and tried some code changes in “end user work item list” page.
    Please share if you have any sample code which can list the work items assigned to other users in end user page. Also please let me know if there is any better alternate to this problem.

    Hi,
    There is a option to find and get other user's workitems. Please check the attestation and remediation tab. Use the form portion from attestation page and add it in the Work item list form. This will enable to the user to search for another user's workiteams and assign it to him/her manually. (The user needs to be assigned proper admin rights)
    To get all the workitems, in the system, you will need to query the repository for all the workitems.... but not sure it will be a good idea in your case as the volume is very high.
    Hope it helps
    Regards
    Arjun

  • CUPS 8.0 end user login issue

    Hi All,
    I am having CUCM 7.1.5 and CUPS 8.0(4) installed. The problem is when I tried to login the CUPS user page the it says "login failed". The CUPS intergration with CUCM seem to be fine because all the end users can be seen in CUPS. But I am not able to login the CUPS user page. Users have needed roles assigned to them.
    CUCM is sycronized with LDAP server over SSL
    Can anyone pls help me on this. What else I need to check? Is there any log to check on CUCM or CUPS?
    Thanks

    Hi Ronak,
    It is not the problem login to the CUPC  (still I didn't tried it), I have problem login to the CUPS User Web page using end user credentials in CUCM
    End users have needed roles assigned and they also are CUP enabled users
    Pls can you suggest me to any thing to check, As I said our CUCM is sycronized with LDAP server over SSL
    Thanks

  • IPCC extension option not found under End user on CUCM

    Hi
    I have a new deployment for UCCX express with CCM V 9.1, when i am trying to go under End user to assign the extension which will be user for IPCC , unfortunately i did not find IPCC extension option , i only find primary extension .Please help. I am unable to see the tab of IPCC extension , only find the selection for primary extension.The integration already done , everything is ok between CUCM & UCCX. + phone services for IPCC subscribe for end users
    Thanks

    Hi
    +5 for MR/Chris
    1- This is famous for fresh installation , especially on Vmware , kindly try to ssh CUCM and type the following:-
    admin:run sql select paramname,paramvalue from processconfig
    where paramname like '%nstalled%'
    Thanks
    Please rate all useful information

  • End User Transaction for Mass Change Sales Orders

    Hello,
    Transaction MASS can be used to change sales orders using object type BUS2032, however, end users are not allowed access to MASS.
    In most other cases, the object types can be accessed by individual transactions, for example, MEMASSPO for BUS2012 and XD99 for KNA1.
    But I cannot seem to find a similar transaction for object type BUS2032, does anyone know whether one exists or how to create such a shortcut.
    Thanks,
    Jake.

    Hi
    See SAP Note 483303 - BUS2032: Only sales orders of category VBAK-VBTYP = 'C'
    Regards
    Eduardo

  • Is there a way to prevent an end-user from changing their own password?

    All you guru's out there, I need your help. Is there a way to prevent an end-user from changing their own password? Is there a function or procedure I can create or what?

    In this case, you do not want someone (whoever they are DBA etc) to connect as that
    particuler user to change the password.Yes, but I wouldn't expect the users to[i] know that password. The connnect would be handled automatically, behind the scenes.
    The clear implication of the OP's question and response was that users would not be allowed to change their own passwords. I'm guessing this is in response to a policy that says users mustn't have simple passwords like 123abc or mom. In such a scenario a better approach would be to apply regexp to a user's password to ensure it contains a mix of letters, numbers, punctuation, etc to achieve the desired level of complexity.
    So questions, should not be regarded as daft Agreed, but the same is unfortunately not always true of business decisions. As the OP has told us not to ask we cannot know why they want to do this. Personally, I think a user's individual password should always be their responsibility; anything else strikes me as insecure. YMMV.
    Cheers, APC

  • Stop the end user if changes are not saved

    Hi,
    Is there a way to show a warning to the end user when they try to navigate outside a page where there are any unsaved changes?
    Thanks.
    -Sree

    Sree,
    Try [url http://stegemanoracle.wordpress.com/2006/03/04/a-re-usable-prompt-to-save-changes-component/]this
    John

  • End user have ability to change font style in text field of interactive pdf form?

    Does the end user of an interactive pdf form able to change the font style, i.e.: make something bold or underline a word in a text field?
    I am making a form with text fields and the end user would like the ability to make something bold or underline it.. I do not see anywhere in acrobat that allows styles to be changed.
    I have created the form in Indesign > saved it as an interactive pdf and brought it into Acrobat.

    Thank you for the quick response! Do you set this in Indesign before exporting or do you set this in Acrobat? I am in Acrobat 10.1.10 and when I go to properties it doesn't give me  'options' to choose from.

  • Java.lang.NullPointerException in end user change password page

    Hi All
    I need to notify a user whenever he changes his password. when i log in to the user page and change password i get java.lang.NullPointerException.
    Any ideas???
    Help is appreciated.
    Thanks

    What exactly are you clicking on in the end user page? Your problem could be a number of things. You can get this error when the xml in a file it is referencing is not properly formed. e.g if you had not properly closed a tag in a config file.

  • After changing a mail list name in Server end, users can't see the update in outlook client

    Dear all,
    This is a real issue. I am a Help-desk in a global company and after changing a mail list name in Server end, users can't see the update in outlook client. Even I download Offline address book in full detail, user still can't see the change in her outlook.
    Does anyone know how to fix it?
    Thanks,
    Franklin hong

    Hi,
    Would you please detail what you did by "changing a mail list name in Server end"? What is the mail list and what server?
    If you switch to Online Mode instead of Cached Exchange Mode, does the user see the change?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for