Change Request TAB Missing in SOLAR_PROJECT_ADMIN  - CHARM

Hi All,
We are in process of configuring Chage Request Management(Charm).we created a maintenance project and added the ogical component.but unable to activate charm. because the  CHANGE REQUEST TAB is missing.
We have followed the steps in SPRO and also followed the NOTE : 903527 except importing the picelist attached but still unable to see the TAB. Our SOlution Manager is at EHP1 sps 2
Reddy

Hi
Have you activated this bc set and performed in the initial basic settings in SPRO.
SOLMAN40_CHARM_BASICFUNC_001
check this blog
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
Regards
Prakhar

Similar Messages

  • CHANGE REQUESTS tab missing under SOLAR_PROJECT_ADMIN

    Hello All,
    Am trying to configure CHARM in our SolMan system. I referred to the below link for configuration.
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    I am trying to create a project under tcode: SOLAR_PROJECT_ADMIN
    while creating project with in SYSTEM LANDSCAPE tab we can see FOLLOWING
    SYSTEMS /\ CENTRAL OBJECTS /\ IMG PROJECTS .
    But am unable to see CHANGE REQUESTS tab which should be at last in the above mentioned sequence .
    can any 1 tell me why its not there. Do i need to configure anything more to get the CHANGE REQUESTS tab
    Regards,
    Ravi

    Hello,
    i had the same problem few weeks ago. I couldn't find the Change request Tab in Solar_project_admin
    I fixed it by following : SAP note : 802793
    The note explain how to re assign the client to manage change request management.
    We folow the note, then the missing tab appear
    Regards

  • No 'Change Request' Tab in Solar_Project_Admin

    Hi,
    I am trying to implement Change Request Management with SolMan on an  Implementation Project.
    I performed different tasks like:
    - RFC connection creation (client 000 & Other mandant)
    - Logical Component creation
    - Project creation with SOLAR_PROJECT_ADMIN
    - Clients are defined properly
    I am not sure about the TMS configuration
    My issue is that i do not have the tab 'Change request' under 'System Landscape' in the transaction SOLAR_PROJECT_ADMIN
    And i would like to know why this tab is missing ?
    I would really appreciate some ideas, advices, please
    thank you

    Hi,
    I solved my issue with the missing "Change Request" tab by applying the note 802793.
    But, since i performed this action, i faced other issues when trying to create a Task List in the "Change Request" tab:
    - Warning : Probleme occured during synchronization of the system landscape
    Then
    - The project is not released. Hence cycle can not be created
    We checked :
    - RFC connections including Client:000 of all the systems
    - Authorizations on SolMan himself and in Satelites systems
    - I found interesting notes like :Note 883981 - Project consistency check which matched our issue, finally the system (with "snote") told me that it could not be apply)
    - Patch, SP up to date
    We have an error :
    - System cancel RFC destination SM_XX1CLNT000_READ, Call TMW_GET_TARGET_SYSTEMS: Function Module " TMW_GET_TARGET_SYSTEMS not found
    - Communication Error, Check the RFC Destination
    For sure, we checked every RFC Connection, everything is Green.
    That is the problem, check by check everything seems to be OK, but finally i still have blocking errors. i'm a little bit lost
    I think it could be an issue with the Transport Routes....but i'm not an expert.
    If anybody could help me please,
    Thanks in advance

  • Project - Change Management Tab missing

    Hi Guys
    After renaming a test Solution Manager, which is a copy from an existing System, Change Management Tab is not visible in the a Project Attributes.
    Before the SID renaming, the tab was visible, but after chaning the name to SMT, it no longer appear.
    When accessing  SOLAR_PROJECT_ADMIN transaction, under System Landscape, there are only three tabs instead of four
    Some logical relation is missing? Any idea where can I verify why?
    Thanks!
    Copied and Renamed system (SMT) with SOLMAN_ADMIN, client 200
    Original System (SSM), user SOLMAN_ADMIN on Client 200

    Hi,
    as you copied the system, probably there is a missing entry which defines the client in which ChaRM will be active. Check in SPRO below "Change Management->Basic Configuration" the IMG activity "Activate Integration with Change Request Management->Activate Change Request Management and Set-up client". It must have your client 200 specified.
    Regards,
    Raquel

  • Personnel Change Requests option missing in MSS

    Hi everyone.  I hope you can help.
    In Manager Self-Service, under the "Team" workset, there should be an iview for Personnel Change Requests:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/54/957e40ec66ce62e10000000a155106/frameset.htm
    However, nothing is there; and for that matter, the entire "Services" navigation panel seems to be missing, options like:
    Employee Information
    Working Time
    Competency Management
    Etc.
    Anyone know why these options might be missing?

    Found the problem.  Needed to install "Business Package for Common Parts (mySAP ERP)" too:
    https://www.sdn.sap.com/irj/sdn/contentportfolio
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f068643e-866d-2910-4eb0-8213d2943872 [original link is broken]

  • Multiple Change Requests for project cycle

    I have a question.. if we have multiple chane requests/documents for a project cycle , how will the project cycle proceed??
    i have two CRs for my implementation cycle , now how should i proceed my implementation cycle, since all the changes are of type SDMJ and i want all my changes to be imported to PRD together??
    Please help

    Hello,
    i had the same problem few weeks ago. I couldn't find the Change request Tab in Solar_project_admin
    I fixed it by following : SAP note : 802793
    The note explain how to re assign the client to manage change request management.
    We folow the note, then the missing tab appear
    Regards

  • Best Practice to process change request

    Hi All,
    There's a confusion of provided functionality by SAP for Change Request Management. Though, through different blogs/articles/book, we have implemented change request management, but initiation process of change request seems missing.
    What I know is project can be tracked through maintenance cycle, if support message is posted through SAP production server through SAP->Help->Create Support Message. What I'm looking for is user should be able to select few parameters of particular forms from forms' repository, available online. Once its filled, it goes to his manager according to Organogram, then a support message gets created automatically, and rest of the process remains same as provided at current by SAP.
    What you guys know of it?
    Thanks
    Nayab

    Thanks Sammi for your confirmatory post.
    So if we need to use required fields for particular configuration from user, say the requirement to develop new company code, of which all required information is maintained in form, the user should submit the filled form, authorized by his manager, to IT department, we then ask the particular user to raise support message and keep a track of such maintenance activity.
    Is it possible to modify Create Support Message screen, that is, another parameter to upload file, as we can do in solution manager service desk mesage -> documents. This might help as well, but I guess SAP must be providing a tool, may be some different product for aforementioned requirement.
    Regards,
    Nayab

  • Change Request Management Configuration

    We are configuring Change Request Management in Solution Manager 4.0 SR2.
    After we have created the maintenance project, assigned our Landscape components as a logical component and created the IMG project for Development system(ASD-315); we have executed a consistency check in Change Request tab of System Landscape tab of the project, and we receive the followong errors:
    1- No consolidation system found for ASD-315 (project XXXXX)
    2- No track for project XXXXXX with log. system ASD/315.
    3- Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for ASP-500.
    Additionally, when we are trying to create the maintenance cycle (goin to to the transaction /TMWFLOW/CMSCONF), the "Distribution Routes" tab doesn't appear.
    Any suggests are welcome.

    no answer

  • ChaRM: Customizing of Change Request (IBase/Component)

    Hi!
    By creation of Change Request the value "IBase / Component" should be filled.
    The default values here are: "0" and "0".
    Has some one already customizng experience here?
    I would like to change the value to e.g. "1" and "314" (my productive IBase).
    Thank you very much!
    regards
    H. Thomasson

    Hi Holger,
    I am not sure about CHARM.
    But since CHARM is also based on Service Desk functionality, may be the transaction IB52 can help you.
    Executing IB52 transaction, will take u to a screen from where u can select your Installed Base using value help. In most of the cases, there will be only one option.
    Just select that iBase, in the following screen, you will be able to see all the attributes of your installed base in the Text tab of the lower right part of the screen which is editable. Here you can make the required changes as you wish.
    Reward for helpful answers.
    best regds,
    Alagammai.
    Edited by: Alagammai Arunachalam on Sep 25, 2008 12:28 PM

  • Change Request - CHARM

    I'm unable to reject Change request in CHARM (Solution Manager).
    When I click on action...i'm getting "There are no actions in the worklist". Any suggestions.

    Maybe the Change Request, which cannot be approved/rejected by you, is assigned to another IBASE-component or is created with another subject (e.g. development correction instead of urgent correction).
    You need corresponding authorization roles for the project (created for the Ibase component) and the different subjects.
    Did you start transaction SU53 directly after getting the message concerning missing authorizations / directly after approving or rejecting the Change Request?
    You will get more details about the authorization objects, which don't fit.
    best regards
    Horst
    Edited by: Horst Förster on Nov 8, 2011 7:25 AM

  • ChaRM: approving of a change request by various list of end users

    Dear, experts.
    Can I customize ChaRM so, that before initiating change request  a support message should be approved by  by various list of end users depending on component (component A - list 1, component B - list 2)?
    For example some end-user wants to change  established business-process. In this process are involved other end-users, so to trigger changes he have to ensure that other end-users are agree.
    can you suggest any profitable solution?
    thanks in advance

    Hey talgat,
    what you need is an action that uses pfac (it s a transaction for defining rooting rules). Thanks to this transaction you can define rules that will be based on different fields of ticket od crmd_order to assign the right person to the ticket
    There is a standard action that does those kind of things called SLFN0001_ADVANCED_FIND_PARTNER of action profile SLFN0001_ADVANCED available in transaction sppfcadm. You ll notice that this action uses rule id AC13200137. Well you ll need to define your action that will be alike with your own rule that you ll have predefined in transaction pfac.
    Use a copy of the standard rule AC13200137 to do your own; it will ease the task for you.
    PS: this link could maybe help your understanding
    Support Team Determination
    Hope this helps
    Regards
    Khalil

  • ChARM - Change Request status issue

    We are currently testing our ChaRM processes.  The biggest issue we have with the ChARM system is that transports associated with a Change Request are being imported into subsequent systems regardless of the status of the change request.
    For instance...
    If I have 5 transports (each having their own change request) in which all 5 have been released from development and have been imported into the quality system. It seems that from this point on, if 3 of the 5 change requests have their status changed to "testing completed", the production import should only import 3 of the 5 tranports.  We assumed that if the other two did not have a status of testing completed, they would not be allowed to be imported into production.  This causes an issue because all 5 tranports will move to quality and subsequently move to production regardless of the status of the change request.  All 5 of these tranports are also on the same maintenance cycle.
    Is this the way the system is supposed to work?  If so, how do we utilize ChARM in a continuous maintenance production environment?
    Your response is appreciated, Thank You for your help.

    Thanks for the update.
    So, I guess my next question would be if Change requests and their associated tranports can be moved from one maintenance cycle to another after they have been submitted and released from Dev.  My concern is that in our normal production release environment has tranports that pass testing requirements at different times.
    For example, Lets say that we release transports into our production system, or "set to go live" for a scheduled import on Tuesday and Thursdays at 5PM. 
    On Monday, I have 5 transports from 5 different Change Requests that I develop and release the DEV environment. On Tuesday, 3 of the 5 transports have been successfully tested and are cleared to go to Production, however 2 of the Change Requests did not have testing completed.
    Is it possible to move the 2 transports to a subsequent maintenance cycle so that the first 3 that successfully passed testing can proceed to go live and import on Tuesday at 5PM?
    My concern is that we do not always know upon development release when the Change Request and associated transport will be permitted to go to production.
    Thanks much for your help.

  • Restriction of Change Manager access to his own change request (Requestor): Charm

    Dear All,
    I have authorization question on Charm.
    Senario : If the a Person having Chnage Manager technical (PFCG) role raises a Change Request  (Requestort) and selects the change manager as someone else. Can the Requestor of this CR, approve the CR (or do modification) as he/she has the Chnage Manager technical (PFCG) role?
    If yes, how to restrict this?
    FYI : Solution Manager 7.1 SP08
    Thanks & regards,
    Shruthi Walikar

    Hi Shruthi,
    Below blog will help  you
    New ChaRM Feature with SP 10: Enhanced Approval Procedure Functions
    Thanks
    Prakhar

  • Number range problem for change request in CHARM

    Hi guys,
    Currently i am working on CHARM implementation and i have a doubt when i create a customised change request(ZDCR) a number is getting generated (e.g 8000000791) before saving the document.but when i come out of the CR without saving and try to create a new CR it is taking the next number. i.e 8000000792
    Now i dont want the number to be skipped to the next number if it is not saved, kindly give your valuable inputs.
    Regards
    Raju

    Dear Fr,
    In SPRO
    Select the transaction type which you have created now
    go to change mode
    search for the box WITH TITLE  TRANSACTION NUMBERING
    now deselect early no assignment.
    whenver you press the save button only then
    you wil have a new no generated.
    PLEASE REWARD POINTS

  • ChaRM : Update decision date and implementation date in Change request doc.

    Hi,
    I've created change request document from support message document.Then change document was created when i authorize the change request document.
    When  Change request document is created, decision date and implementation date is empty.
    1.How can i configure the decision date to be automatically capture when change manager have authorize the change request?
    2.How can i configure implementation date to be automatically capture when change document have been confirmed?
    regards,
    Biah

    Hi,
    Go to the transaction code MASS  and enter the OBJECT  TYPE as BUS2032 and enter
    It will lead you to the next screen where you can find the  Table and Field TABS
    Select the  SALES ORDER HEADER DATA  and choose the fields data and choose the fields PRICING DATE and BILLING DATE  and execute
    In the subsequent screen you can see the selection screen where you can enter all the Sales documents for which you want to change
    Key in all the documents and execute
    Now change the date as per your requirement and check the effect
    regards,
    santosh

Maybe you are looking for