Change scanned document from 8.5 x 14 in. to 8.5 x 11 in.? Please?

Hello everyone,
Earlier this evening, I scanned in several preprinted forms into 3 documents. The hope was that I would be able to complete these forms by typing them with Adobe Acrobat 9, either as forms, or just the basic typewriter function. However, the scanned pages are 8.5 x 14 inches, yet the original page size is American standard 8.5 x 11 inches (all pages), 'Portrait' orientation.
How do I get these pages back to their original size, without re-scanning them? [If there is no other way, then how do I set up Acrobat 9 so that it will scan them at 8.5 x 11 inches to begin with?]
I have tried 'page cropping', but this does not seem to be the correct method. Also, per the directions of another forum poster, I tried 'printing to PDF', but the Adobe driver gives no option of selecting the top of the page as the 11 inches to be 'printed to PDF', and scaling and other methods are out of the question, because these are government forms and must maintain some semblance of their original size.
Your kind consideration and help with my question is greatly appreciated.
Thanks!
~Juan Antonio

Hi,
This is a helpful suggestion, which probably be done periodically as a matter of course. I will definitely try this when I get to my project today. Does anyone have other input that they would like to add? I am going to look,until I get 3 suggestions that might help. Once it is time for that project, I will try them all.
Take care and thanks for answering my question!!
~Juan Antonio

Similar Messages

I have a macbook pro and I recently installed OS X yosemite 10.10.1. Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation. It works fine on other pc though. I tried reinstalling the

I have a MacBook Pro and I recently installed OS X Yosemite 10.10.1. Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation. It works fine on other pc though. I tried re-installing the canon drivers but nothing changed. Please help.

zoiand wrote:
Since then the scanned documents from my canon mx450 appear black, even those that I have scanned before the installation.
This is very odd. Were the images that you scanned before installing Yosemite saved as JPEG? If yes, have you tried saving the scanned image as a TIFF?
Also, if you scan to a USB memory stick from the MX and save this as a JPEG, and then open the file on the Mac, does it also display as black?

How can I change a document from booklet to single pages

How can I change a document from booklet to single pages?

Very cumbersome.
How many pages?
Make a copy first.
In Acrobat use the Crop tool to crop half the width. (Pages > Crop Pages.)
For 11x17 to 8.5 x11 crop all even pages 8.5 left, all odd pages 8.5 right.
Do you have InDesign?
Create a new document correct to finished page size.
(Use Import Multi Page script to) Place all pages offset by the proper page amount.
Export new pdf.

How do I send a scanned document from my 5520 e printer to an e-mail contact

how do I send a scanned document from printer to e-mail account (5520 e-all-in-one series

Hey Storm46,
The answer to your questions is: YES.
To do so:
Set up a custom email for the printer through the HPConnected.com website for your printer. For information on how to setup ePrint click here.
Get the Scan-to-Email app for the Photosmart 5520 through the HPConnected website
Set up this feature and it will provide you the ability to scan a document and email it from the customized email for the printer
Scan an item and send it to your personal email
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printing scanned documents from external system

Hi All
Is there any function module available in SAP which can print the scanned document available in external system.
My requirement is :
They will maintain a reference number of the scanned document in Material master.
so when ever they print the' route sheet' we have to pick the scanned document from the external system based on the reference number and print along with the
' route sheet'.
Thanks & Regards,
Kishore

Hi John,
Could you please let me know the function modules .
Right know am using cv120_start_application ,But with this function module I am unable to print the images (Not able to print JPG,BMP and PDF documents)
My requirement is SNP format document will be attached in material master.
Thanks in advance.
Regards,
Kishore

Scanned documents from preview yield blank/black pdf

I have just upgraded laptops and operating systems moving from Snow Leopard to Lion. I am attempting to scan text documents using Preview in Lion as I had done before using Snow Leopard. I am using the same printer/copier/scanner, HP Photosmart C5280, but am encountering different results. When I scanned documents from my previous MacBook using Snow Leopard, I achieved the desired pdf document results. However, when I scan the same document using my new MacBook Air and OS X Lion, the document saves as a blank/black pdf. Does anyone have any idea why this is occurring?
Any help is greatly appreciated.

Rysz,
Thank you very much for your prompt reply.
Unfortunately, I ran Software Update and also referenced the HP site to determine the driver for Lion. My driver is up-to-date and no software updates are available.
I am going to keep researching.
Thanks again for your help.

Is it possible to export a scanned document from pdf to Word in Czech language?

is it possible to export a scanned document from pdf to Word in Czech language?

Hi pascaldu,
Did you choose Czech as the language for OCR? If not, please follow these steps:
Choose File > Save as Other > Microsoft Word > Word Document in Acrobat.
Click Settings at the bottom of the Save As dialog box.
Click Set Language.
Choose Czech from the Primary OCR pop-up menu, and then click OK.
Click OK again, and then click Save.
Please let us know how it goes.
Best,
Sara

How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
Jack

First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck.

Can/t scan documents from HP OJ 6500A plus

Ever since I installed McAfee, I can no longer scan a document from my HP 6500A Plus to my Dell Inspiron desktop computer. I keep getting the message "Scanner communication cannot be establisheed".

Hi Greg42,
Thank you for getting back to me again. If the printing is also showing issues, such as the slow printing, it's possible the printer itself could be at fault.
I'd suggest loading about 10 blank pages and make 10 blank copies to test out the hardware without involving the computer in any way. If the copies show problems, the printer has an issue.
If you find that the copies are working fine, run the Print and Scan Doctor from your computer to fix or detect printing and scanning problems. You can save this tool right to your desktop and run it twice (and when needed in the future) for printing and scanning.
Let me know how you make out thus far and we'll go from there.
Cheers,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Change scan resolution from HP Scan App iMac

I use the HP SCAN app to scan from my Photosmart. I like it because it lets me crop to constrained size. However, it seems to scan only at 200 DPI. I want a higher scan resolution. I know how to change it through System Preferences, but HP SCAN does not use those settings. How to I adjust the scan resolution from WITHIN HP SCAN application?

OK, from the HP Scan software click the Scan button.From there click the Down arrow () or the Show Details button to view and change any scan settings, including the scan resolution.

Coding to scan document from third party in SAP

Hi,
Plz send the coding to scan from the third party (scanner) into SAP and that scan copy should need to store as a JPG file format in one folder.
Thanks in advance

Hi Madan,
i also have similar requirement like this, i have to transfer scaned copy of document from DMS system to SAP system if u got he solution ,please update the same.
thanks and regards.
Bharath

Scanning Documents From File Center from HP Officejet Pro 6830 Not Working with Twain Driver

I just purchased a HP Officejet Pro 6830 All-In-One printer and planned to use it to scan from Filecenter (Lucion Technologies) using TWAIN driver. The Twain driver for the HP shows up in Filecenter, but the scan produces a blank document. My previous All-In-One printer from Dell (Lexmark) scanned to this software with no issues. Are there any solutions to this issue? Filecenter has different scan modes A and B and Transfer type (Native, Memory and File) and I tried all 6 options and none worked.

Hi @cyclebob ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

How does one move a scanned document from the scanner to the SD card?

I use a DELL laptop, plus the DELL All in One printer Model 922. I can scan something but then I would like to place it on my card for viewing on my TX. I do scan it as a picture. Is there any other way? Is there another application I should be looking for?
Post relates to: Palm TX
This question was solved.
View Solution.

If you scan it as a picture, just HotSync it over using Palm Desktop and the Media button in the left side column.
If your scanner can do "OCR" (Optical Character Recognition) you might be able to scan it as a Word document and then use Docs2Go to transfer it.
I'd suggest upping the scan resolution a bit to give you the option of enlarging the image on your TX. While viewing the picture, press the UP direction on the 5-way pad to Zoom In on the picture.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Is it possible to change a document from Page Layout to Word Processing?

I just downloaded and launched the Pages 4.0.4 update, which adds the option of exporting to ePub. Unfortunately Pages won't export a Page Layout document to ePub.
Is there any way to change the type of document or would it be easier to just create a new document and paste everything from one to the other. This is a newsletter document that gets published monthly with new content so changing from one format to the other oughtn't bring too many problems.
Thanks!

I know that floating objects isn't supported in WP and I think there are a couple of other things but I can't recall off the top of my head.
I remember that I started using it in the WP mode when I first put together this monthly newsletter and ran into some problems, and switching to Layout took care of those problems.
I've nothing against the WP mode, in fact Iuse it all the time for more traditional WP jobs. It's just that I found the Layout mode to be more suited to, well, laying out. I come from the really old school of physically cutting and pasting typewritten stuff and Zip-a-tone line art graphics onto a large sheet of paper lined with a "non-photo" blue grid. The person who actually printed it took a picture of these pages and used the resulting page as a lithograph master, using real (ugh!) viscous ink rather than toner. So having the option of moving objects around and flowing text around graphics is appealing. Let me know in a PM if you want a Pages file of one of these issues.

Moving scanned documents from hp into My Documents

Help! I have an HP Photosmart C5200 series all in one scanner - I have scanned a document into my Windows XP and I want to move it to My Documents so I can attach them to an email. I use Yahoo Mail so can't do the Outlook thing!

Hello @Lollipops,
Welcome to the HP Support Forums! I see when you scan on your HP Officejet 7612, you are getting a yellow tint on the images. You have tried the online recommendations with no success.
First, I would like you to make a copy, does the copy come out with a yellow tint as well? If no, continue below:
Please perform a Hard Reset on the OJ 7612:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
If after the hard reset you are still getting the yellow tint on your scans, please contact our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Change scanned document from 8.5 x 14 in. to 8.5 x 11 in.? Please?

Similar Messages

Maybe you are looking for