Changing key figure values in DSO/Cube

Experts,
I have a DSO and a Cube and the data has been already loaded in to a amount Key Figure. By default it is 2 decimal places. I want to change the decimals to 7. I cannot delete data from the cube or the DSO.
Can you please suggest some ideas to do this.
I came accross this note 579342 which talks about realigning this but as I have not implemented this before, I wanted to get your thoughts on if this is safe to do.
Thanks
Yashu raj

Hi Yashu,
I did this with using system message board and I put message on EP tooo.
So you do a small R&D. Run this report and let me know too if amount data is reflecting in the cube or not.
Logically it should not but have a try?
Regards,
Mahesh

Similar Messages

Change Key Figure Value based on Characteristics

Hi,
I have a report where based on characteristics value I have to change the value of the key figure either to + (Positive) or -(Negative).
Is it possible through virtual keyfigure?
Can anyone give me details of the same.
If anybody can send me complex reporting document, please send it to
[email protected]
Thanks,
Moon

Hi.. Do u want to implement this only in the report or store the sign back into the cube ?
If u just want to use the value of the masterdata as a key figure for calculation (i.e. u can read the value of the masterdata or attribute and write a formula variable that uses this value and returns a sign), use a formula variable with replacement path and u've got ur results.. in case u want to store this in the cube, the transformations would help..
let me know if this helps and it would help further if u explain the exact scenario...
Cheers,
- Aditya

Key Figure value in Cube showing with extra zeros

Loaded data into the cube. When I display the result
Key figure values are showing with 2 extra zeroes and Quantity value shaowing with 3 extra zeroes.
Original value
Price, Quantity, Sales Rev
2     1     2
3     2     6
When display value from cube
Price, Quantity, Sales Rev
2,00     1,000     2,00
3,00     2,000     6,00
Why zero is showing? How can I display the original value? In PSA, values are showing correctly.
Thanks,

Hi,
These are the zeroes after the decimal places. this is the property of the key figure.
In your report you can change the display value. In the display properties of the Key figure under the number of decimal places make it as 0. This will remove the zeroes.
Hope it helps.
Regards,
Gaurav
Edited by: Gaurav Kothari on Oct 16, 2008 10:35 AM

Key Figure values based on characteristic Drill-downs

Hello All,
I have Issue with my drilldown options in the report. The values of Sales qty need to change at particular drilldown.
I have Sales Revenue and Sales QTY key figures in my DSO with plant, factory, customer and Business type (Values A, B, C and D) characteristics.
IN the report requirement I want to show the SALES QTY for only Business Type "A" at Plant , factory and customer level, but when I am at the Business code level, then I am to show all the quantities by that level.
THe sales revenue should always show values for all Business code irrespective of the drilldowns.
please provide suggestions and code on how to go about the issue.
thanks,
pra.

Hello Guys,
Thanks for your response.
Let me explain clearly...with an example.
We have DSO which has 5 chars and 2 KFs.
Chars - Company Code, Plant, Customer, Material and Business Code (which has values A, B and T).
KFs - Sales Qty and Sales Revenue.
Report output ---
Customer
Company Code
Plant
Material
Business Code
Sales Qty and Sales Rev
Requirement is a follows -
When the report is run.... the report will display on Customer with KFs.
then if user wants to pull company code he can do so...as will other chars (Plant, Material and Business Code)
but the condition is that when the user is seeing the report at customer with KFs ,....the KFs should only show values where business code = "A"
so is the same with other chars - Company code, Plant and Material.
But when user drags and drops the Business Code char in the report against the KFs .then the report should include all Business Codes ( A, B and T) with corresponding sales qty and sales rev for all business codes.
Solution - Partially working--
What I have done..is restricted the sales qty and rev with Business code = A, its working fine for all drill downs except that, when I am at business code level its showing as
Business Code QTY REV
A             300          3000
B                0              00
T                0               00 .
Hope you got the issue. Please let me ,,if you need any information.
Thanks,
Pra

Key figure value in a level

Hi is it possible to identify which key figures values has introduce a user ? and which CVC has the user uses for inserting the key figure value?
REgards.
PS :We have APO DP 5.0

Javier,
It is possible to identify and track the inputs of specific users contribution to that Key figure using the following method, Provided you follow certain prerequisites first.
Its should be known before the certain people are responsible for certain data selections, like if there is a change in certain Sales org, we should ideally know who is the assinged planner to that Sales Org. or that sales org has been assinged to which Planner
Next, Develop to Lag reports in BI using the regular snapshots of the the data extracted out of DP before and after the changes have been made for that particular KF.
Compare the changes using the versions of snapshot before changes and after changes, or perhaps create another calucalted KF showing the different between two versions. The BI team should be able to create reports that enable you to run this report on all levels for that Key figure.
Hari V

Need help for report Variable to restrict the key figure value...

Hai gurus,
Now i have data in the cube as follows...
Reuisition     HR INTW date     LM INTW DATE     TEL INTW DATE     HR Count     LM Count     TEL Count
a1              01.01.2010     02.01.2010             01.04.2010                 1                1                 1
a2              02.02.2010     03.02.2010             02.02.2010                 1                1               1
a3              03.03.2010     04.03.2010             03.03.2010                 1                1               1
when i execute the report it shd ask the prompts with Date interval as in the below...
HR INTW date
LM INTW DATE
TEL INTW DATE
if i dont give any interval in the variable prompt it should display all the recors as follows
Reuisition     HR Count     LM Count     TEL Count
a1               1                  1               1
a2               1                  1                     1
a3               1                   1             1
If i give LM INTW DATE interval as    01.01.2010 to 31.02.2010
then it should display all the other counts as in the output_1 , but for LM count for a3 it should show 0.
Reuisition     HR Count     LM Count     TEL Count
a1               1                  1               1
a2               1                  1                     1
a3               1                 0                  1
that means wherever i restrict the data depending on the variable that only that interval key figure value shd be in the report..
for this scenario, which variable i need to use... and how i need to restict the KFig value in the report...
Right now i am getting like this but it is restricting the records,,, where it should not restrict the records...in the report..
Please guide me for the same...
If any concerns about the scenario please let me know...
Regards,
VJ

hi chowdary ,
could you tell me the var. creation in detail and with which reference object i need to create ...
whether i need to take LM_DATE / 0DATE while creating variable...
and i kept this variables it in filter section, based on the LM_DATE Object.
i have tried both.. y'day when i take 0DATE it giving me some results...
But at the same time it is restricting the records..
i think it could be a problem with var.. properties?
need more inputs pls.
Regards,
VJ

Error in key figure value at Reporting level

Hi Experts,
I had problem of Key figure value which displays wrong data in reporting.
The Process is :
I had added the key figure SALK3 to the generic data source (xxx). The Extractor is Table/View, Table is MBEW.I had replicated to BW side.
In BW, The process is Data Source(Generic) to 0MAT_PLANT(Infoobject (Added SALK3 to the infoobject of Attributes tab) ) loads to Multiprovider.I can see data in the multi provider for that particular field after loading.
Now the problem is, In Query designer i had added the key figure in Columns and ran the report.The output of the field is, If the value is 100 it displays 100 ERROR, if it 200 it displays 200 ERROR.Could you please help me on this,where i went wrong.
Regards,
Kishan.

Hello,
Please check with the follwing screen shots:
Right click on the key fgure you created----select edit
Once the screen opens select the NODIM from Data Functions before the key figure (as highlighted).
Finally click on OK.
Regards
NS

How to create a variable for key figure (value will be entered by the user

I want to create one query, where the user has to entered a max value when the query is started, so that only the query rows will be listed, where the key figure value (integer) of the row is smaller than the max value given.
How can i define that variable which has to start at the begin of the query; and also the restricted key figure iin consideration of the KF variable.
Thanks for helping
Ar.

Hi Arnaud,
Go to Conditions-> Right click -> New Condition -> Edit -> NEw -> Selct the KEy figures from the dropdown( the KFs that are used in the rows/columns) -> Select Less than from the operator drop down (less than is for you case) -> Values, there is an option to create a variable -> Select the variable -> transfer. It will appear on the top.
Save & Execute, you will find it in your selction criteria.
Regards
Sunil

BEx query: count unique key figure values

Hi
I need a little help with a query. I need to count the number of unique key figure values. Se example;
Data:
Employee1 - 2
Employee2 - 3
Employee3 - 2
Employee4 - 1
Employee5 - 2
Employee6 - 1
Employee7 - 2
Wanted output:
1 - 2
2 - 4
3 - 1
What kind of options do I have?
Thanks
Mike

I would create a new characterstic for the same key figure and placed in rows and count in columns.
and second approach would be , create condition with customer exit and write the logic to count the unique values.
This is just a direction to move forward with the assumption that you are good in using variables and wirting logic in ABAP.
Thanks,
Sukhi

Can we change key field values in table maintenance

Hi,
I have created Z-table and table maintenance for the same...
In table maintenance..Can we change key field values??
Is there any posibility????
Rayudu

you can do it in this way.
open sm30->tablname->edit
snow select the row(s)->copy->change the keyfield values-back->save.
no in that sm30, select records with old primary key and delete->save.
so you got all field similar for those record under modification, only the key field changed.

Code to sum up multiple record key figure values from one ODS to another OD

We've got two ODSs: ODS1 and ODS2 and ODS1 feeds data to ODS2 through update rule. In ODS1, multiple records could contain one same doc records and we would like to sum up a key figure value for these multip records with the same doc number in the update rule and populate a key figure (a sum-up value or total value) in ODS2 for this doc number. We wonder how the code would look like.
Welcome the valuable input!
Thanks

Hello Kevin,
In this case there is no need of a code. As in ODS2, contract number is a key and PO is not a part of key, you can have update type for the key figure as "Addition". Value for that particular key figure will be added for all the recordes with same contract number irrespective of PO number.
Hope it helps.
Regards,
Praveen

Key Figure values in the Bex Report are different from the cube

Hi all,
When I tried to pull data of the cube, the values of the Key Figure 0Lotsize_cm was showing 100 EA. But when I try to run the query of the cube, then the key figure is LotSize is showing up as 500 EA. I don't understand why this is happening.
When I checked for Aggregation in the Key Figure. It shows up as "Sum" under aggregation and "Last Value" under Exception aggregation.
Could some one help me find a solution to this issue.
I look forward to hearing from the experts.
Regards,
S.P

Hi Arun and Zegion,
Thank you for your responses.
Arun, I do not have any aggregates on the cube. I changed the aggregate properties of the Key Figure from SUM to Minimum. this has solved my problem temporarily.
the reason I am saying temporarily because this is a SAP delivered InfoObject. This is for the datasource 0CO_PC_PCP_01. When I read through the documents, it said, SUMMation for Aggregation and Last value for "Exception Aggregation" will display the value of KF as the last value and does not add them up.
Since this wasn't the happening in my query, I changed the Aggregation from SUM to Minimum.
Regards,
S.P

How to get the key Figure values.!.......?

Hi friends...
      I have a scenerio , where I have loaded the data from 3 different data sources say A , B and C in to 2 different DSO s and in to 2 different Info Cubes. And I have built Multi Provider from this 2 Info cubes.
In the data source B , I have BELNR (Parked document number ).WRBTR (for Amount). In the report I have to show a field called Nr of Documents Parked and Value of Documents Parked. Same thing for Data Source C, for Blocked Documents. Now My question is there is no Key Figure in My Data Model to Count the Nr of Parked / Blocked Docs....So in the Reporting how can I show this ? Do I need to use Customer Exits ? Do I need to have CKF /RKF ? if so , from what Key figures ? or Can I get the Count from the Backend (Modelling itself by using a Keyfigure with any Code)?...not only this 2 , I have lot many custom things to do in my Model...If any one can get me some idea on this , remaining will be very easier for me as they all are similar things to do....
Please let me know if you have any questions or I need to elabarate it more to get an Idea on this....
Thanks in advance

THANKS GUYS ,
     I wrote the transformation routiene to count all the parked documents as
IMPORTING
    request     type rsrequest
    datapackid type rsdatapid
    SOURCE_FIELDS-/BIC/ZPARKBEF TYPE /BIC/OIZPARKBEF
   EXPORTING
     RESULT type tys_TG_1-RSTT_IPTDA
DATA TMP TYPE tys_TG_1-RSTT_IPTDA.
IF SOURCE_FIELDS-/BIC/ZPARKBEF = 'Y'.
TMP = TMP + 1.
ENDIF.
     RESULT = TMP .
         But when I see the Infocube data its showing only 0 for Parked Before value 'N' and 1 for Parked Before vale 'Y'. But I want to calculate total number of parked documents ..How can I do this?
Thanks

Divide key figures in real time cube by using planning function

Dear all,
I have a real time cube which contains one key figure which is defined by 10 characteristics.
For one country, the users types the values fpr the key figure in a wrong format, so I have to divide those values by 1000.
I have tried to do this with a planning function "Revaluating" and a filter (on this spec. country). I have combined this two element in a planning sequence. When I run this I just get the error message "planning function ended with errors" without any further information.
Is there an other way to devide values within the cube? the BI release is 7.0.
Any help would be great.
Best regards,
Stefan from Munich/Germany

Hi Stefanos,
What you are doing is absolutely right.. However, I want to ask a few question..
1. Are the characterestic values included in the filter ? ie. If you want to change for Country: UK, is UK present in filter?
2. Are there any other characteristics that you have not included in the function and are getting changed by chance ? Like you might need to include 0fiscyer in To Change if you are assigning 0Fiscper.
3. Write a small FOX function with hardcoded values to check if the system is accepting the values or not..
It should work.. Please write back in case you need more help..
Regards, Rishi

Compression error due to Key figure values

Hi experts,
When I am compressing the Info cube, the job is getting terminated. I think that the problem comes from a data issue.The field /BIC/ZX_COM_LC (key figure) contains huge values in both F table and E table. For exapmle the entry in F table is 23.592.684.640.809,00 (16 digit) and E table entry is 985.460.854.341.148,62 (17 digit)and while in the process of compressing they should be added and the value becomes 18 digit number which is greater than the capacity of that Key figure(CURR 17 decimal 2). This is why the compression job is terminated.
Please through some light on this issue.
1.If I change the key figure type from DEC to FLTP , what are the consequences?
2.Do we have any oss notes to solve this issue in production?
3.Is there any work around for this?
Please provide your inputs to solve this issue.
Thanks in advance,
Edited by: SiNU reddy on Aug 19, 2010 3:35 PM

Seems like you have too much of data still present in F fact table whcih needs to be compressed.
Is this data is present in one request or with the multiple requests?
If its with the multiple requests then you can do the compression job multiple times by splitting the number of requests in this case so that the data whcih you are trying to compress is limited in this case.
So I propose you to compress few requests at one time and proceed further and check whether you have the same issue comes again or not?
Do get back.. Hope this helps.
Murali

Changing key figure values in DSO/Cube

Similar Messages

Maybe you are looking for