Channel Frozen

ESPN - Channel 36 - has been frozen for the past two days. There is a picture, and current broadcast can be heard, but unable to see live broadcast. I've powered down several times with no change. No other channel experiencing issue. Please advise.

Hi
This is normal problem (Some times i also faced this problem).
There is no clear solution for this problem as far as i know.
Only solution is just inactivate and activate communication channels at some point of time that you are not using for days......
Please let us know if you find any other solution.,
Alternatively you can increase threads in Visual Adimin for adapter engine sync and async queues
Thnx
Subbu

Similar Messages

Communication channel frozen - XI

Hello All,
In my XI system the communication channel freeze's. when a huge file sent or no data sent for some days. This happens every time. And come's up only when I change the adapter engine from central to non- central, vise versa, and activate the communication channel.
Do i have a permanent solution for this??? Please suggest.
Thanks-
sk

No cross posting.
Read the "Rules of Engagement"
Regards
Juan

Communication channel frozen.

Hello All,
In my XI system the communication channel freeze's. when a huge file sent or no data sent for some days. This happens every time. And come's up only when I change the adapter engine from central to non- central, vise versa, and activate the communication channel.
Do i have a permanent solution for this??? Please suggest.
Thanks-
sk

Hi
This is normal problem (Some times i also faced this problem).
There is no clear solution for this problem as far as i know.
Only solution is just inactivate and activate communication channels at some point of time that you are not using for days......
Please let us know if you find any other solution.,
Alternatively you can increase threads in Visual Adimin for adapter engine sync and async queues
Thnx
Subbu

Scan for channels frozen

My box (latest version, 3 weeks old) was fine upto about 6pm. It decided to update itself, don't know why, and it won't get past the Scan for Channels page, gets stuck at 0%. I've done everything. Switched off/on, rebooted, powered down, held ok and down arrow, all that stuff. Doesn't move from 0%. Tried with aerial cable in and out. Any advice before I make the dreaded call to the "help" desk?
Solved!
Go to Solution.

We were watching catch up on Sat evening when the vision box took a turn and froze resulting in no freeview channels. I then went through all procedures to re scan them but still kept getting 0% complete. After total frustration I rang the helpline Monday am what a mistake After 2 hours on the phone to New Delhi 0800 number thank goodness I was still no further than when I 1st dialled having spoken to 4 different people with an approx 20 min wait for each. They could not explain clearly what we had to do as the English was so poor we could not understand them they also seemed unable to realise that our landline is not near the TV. Having given my mobile number I managed to get an answerphone message to say they could not contact me fantastic!! Thank goodness for the comments on the forum how to rectify this problem press the left & bottom arrows on the front of the vision box and disconnect at the back of the box keep pressing buttons when reconnecting and hurrah!!!!!!!!! It worked and I managed to scan in the channels now back working again Please BT sort out your technical helpline.

Ion Channel not working for Zip Code 32162. Frozen Screen!

About 2-3 days ago, the Ion Channel #15 for Zip Code 32162 is a frozen screen. What's the deal. Same on all 3 TVs which have different Boxes.

TomHosken wrote:
About 2-3 days ago, the Ion Channel #15 for Zip Code 32162 is a frozen screen. What's the deal. Same on all 3 TVs which have different Boxes.
Apologies for the issue and the experience that you described above. Are you still having this issue?
I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
Thanks for your patience.

Communication Channel is Frozen

Hi all,
We are experimenting a weird issue, and this is not the first time. One CC(file/ftp) is not picking up any file from the folder. In spite of we changed the fto user for an invalidad one, I will continue on green(It seems everything was fine) however it is not.
Our temporal solution is create a new channel to fix it and process the files.
We want to know If there is any sp or configuration we need to do to avoid this kind of issue which is causing a lot of problem with business people(the order are not being processed correctly and in the right time).
Any help will be really appreciated.
Regards,
Ivá

Hi Jose,
In case of JDBC and File/FTP adapters, it happens that the channels get locked.
You have to unlock the channels in Visual Administartor.
To avoid this problem in future, you have to configure the Task Timeout paramater in the sender channel on the advanced tab page.
This will prevent the locking of channel in future.
-Supriya.

Extra Channels - constant "You have lost connectio...

The Extra Channels are now driving me and my Mrs (her more than me) mad. From getting a very rare and occasional "you have lost connection" message and frozen screen, I am now getting this error cropping up almost every 10 minutes.
My setup (now) is:
Infinity 2, 76 down, 17 up. Has been like this and 100% stable since installation in March.
Vision box connected by long ethernet cable (about 20m) to port 1 on the HH3
8-port Gigabit Switch connected to port 4 on the HH3
Wifi not enabled on HH3 - using Apple Airport Extreme/Time Capsule to use 5Ghz
TV/DVD in lounge and TV/WD box in bedroom connected to the Gigabit switch via Netgear Powerline
I originally had my Vision+ box connected to the switch via Powerline, but about 3 weeks ago (when this issue really raised its ugly head) my vision+ box threw up a message saying it was no longer connected to the internet, check connections, blah blah. Checking on the HH3 showed that the box indeed wasn't connected. Power cycling the box, HH3 and the Powerlines wouldn't remedy the situation, even though everything else was working 100% - TV would connect and stream Netflix, BBC iPlayer etc. So in desperation, I laid in a 20m ethernet from the Vision+ to the HH3. Initially, it still wouldn't connect, but after another couple of HH3 and Vision+ reboots, it connected and all was well - well, sort of.
From that point on, the "You've lost connection to this channel (VMC011) errors have been getting worse, until yesterday, you could barely watch a programme without the damned thing dropping out.
So, contacted Vision+ support in India - do all the usual stuff off his script, but it still hasn't resolved, so he said he'd escallate to 2nd line and they'd phone me today. No call (real surprise there).
So, call back, again have to do all the usual - power off the VDSL modem, HH3, Vision+, back on etc. He then claimed he'd 'reset' the service from his end and 99.9% sure that would 'cure' the problem. Well, guess what - it hasn't.
Since my call to India at 2pm, I have had disconnections at 14:26, 14:51, 15:16, 15:34 and now just at 16:06.
No amount of 'force resync' gets it working, nor does changing channel. The only thing I can do is to wait for the stream to restart, and it usually does with lots of pixellated/garbage picture for about 10 seconds or so before it clears and is watchable again. This 'outage' lasts between 2 minutes and 8 minutes.
Whilst this is happening, there is no continual stream of data on the LAN1 led on the VDSL modem - just the occasional short burst of data, which is coming from the Vision+ box as if I unplug it from port 1, this 'polling' stops.
This is going to be a nightmare once the sport starts - but I'm now getting aggro from my Mrs (who is recovering from Cancer treatment so tends to watch quite a bit of 'her' telly) as she quite rightly feels we are paying for a service we are barely getting. Because of the long and unweildy cable, I'm stumping up £120 or whatever to have my master socket/VDSL modem/HH3 moved adjacent to the TV as this was initially suggested as a fix, and BT are coming out Monday (supposedly) to do this work. But I can't believe this will effect a cure as I can happily watch Netflix or iPlayer without any issues whilst the Vision+ box is dropping it's stream.
I cannot believe this is the 'standard' of service that most subscribers are getting - and I believe this is an exchange or equipment issue, but all India seem capable of doing is reading dummy instructions from their script and 'resetting' the service (whatever that means) - it needs an engineer in the exchange with a data monitor to see what is going on.
Problem as I see it is that on our FTTC cab, there are not many subscribers (yet - I was No. 2 and an Openreach engineer was No. 1) and from what I understand, no other Vision+ subscribers, though that will probably change when Sport is activated. So because of this I doubt that BT are getting any other complaints.
The cynic in me thinks that the new HH4 is being released to cater for all the 'new' BT Sport subscribers as there is an issue with the HH3. Wonder if the HH3 is just not up to handling the multicast stream properly?
Anyone got any sure fire methods of escallating this?

If you want help from the Mods - ask them via the link below
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Ethernet connectability completely frozen-out by frozen SES-mode; WTR54GS

On a reset i accidentilly hit the SES button, now on my ethernet connection, the "Secure Easy Setup" button is frozen white. i've browsed th web, found other people have encountered same problem.
i've spent probably 100 hours, trying many fixes, including your company's suggestions -- to no avail! (note: multiple reset attempts still won't fix this).
my PC and ethernet card work fine on other products, it's just that wtr54gs has now frozen me out by your proprietary SES-mode. i've tried, via the wireless set-up, assigning fixed ip ( e.g. : 192.168.16.100) to my ethernet + your suggsted 192.168.16.50 to re-flash firmware -- nothing works! can't even get a dhcp ip from wtr54gs,because the frozen SES-mode has my ethernet connectability completely frozen-out.
re-flash firmware won't go on wirelessly either, a "failure" message appears like "not suficient system resources" -- **bleep**! -- on my Windows task manager networking screen i see i'm sending megabits of
firmware data, but the wtr54gs only picks up about 10% of the sent amount -- seems the wtr54gs can't handle the speed my wireless adapter is sending it ( also connection is strong, i'm 4 feet away from it ). i don't know how to force data rate to go slower ( on ethernet card i've reduced rate + to half-duplex, but, of course that a no go, since the wtr completely has my ethernet connection frozen-out in the first place, my original concern!).
i bought a D-link DWL-G730AP travel router, hoping theirs would be better, but it's very shoddy, very poor reception and difficult interface. i'm returning that. i long for the days when my Linksys product used
to work -- Please Help Me Fix It !!!
i used to use wtr54gs as a client-mode, connected to my PC via the ethernet connection, and the wtr54gs incoming internet connection was set to "wireless" -- all woked great, until this freezing-out problem.
if the SES-mode is internally permanently freezing me out on ethernet connectability, it appears i'm going to have to get a replacement ( as, other people on the web, similarly-situated, have stated).
my original purchase was about $60, but i see Amazon is recently selling the wtr54gs for $180!! -- i'm NOT buying a replacement at that cost!! please, either help me fix my frozen wtr54gs, or, since i'm
covered by warranty, tell me the procedure to get a replacement / exchange.
[Oh Thanks to Linksys for sending this to me!]: Thank you for your inquiry! As we strive to provide our customers with the best support experience, we are discontinuing the email support channel for Technical Support Inquiries.
Linksys listened, and created a wide variety of tailored support options designed to get you what you need, when you need it, in a way that works for you!

On a reset i accidentilly hit the SES button, now on my ethernet connection, the "Secure Easy Setup" button is frozen white. i've browsed th web, found other people have encountered same problem.
i've spent probably 100 hours, trying many fixes, including your company's suggestions -- to no avail! (note: multiple reset attempts still won't fix this).
my PC and ethernet card work fine on other products, it's just that wtr54gs has now frozen me out by your proprietary SES-mode. i've tried, via the wireless set-up, assigning fixed ip ( e.g. : 192.168.16.100) to my ethernet + your suggsted 192.168.16.50 to re-flash firmware -- nothing works! can't even get a dhcp ip from wtr54gs,because the frozen SES-mode has my ethernet connectability completely frozen-out.
re-flash firmware won't go on wirelessly either, a "failure" message appears like "not suficient system resources" -- **bleep**! -- on my Windows task manager networking screen i see i'm sending megabits of
firmware data, but the wtr54gs only picks up about 10% of the sent amount -- seems the wtr54gs can't handle the speed my wireless adapter is sending it ( also connection is strong, i'm 4 feet away from it ). i don't know how to force data rate to go slower ( on ethernet card i've reduced rate + to half-duplex, but, of course that a no go, since the wtr completely has my ethernet connection frozen-out in the first place, my original concern!).
i bought a D-link DWL-G730AP travel router, hoping theirs would be better, but it's very shoddy, very poor reception and difficult interface. i'm returning that. i long for the days when my Linksys product used
to work -- Please Help Me Fix It !!!
i used to use wtr54gs as a client-mode, connected to my PC via the ethernet connection, and the wtr54gs incoming internet connection was set to "wireless" -- all woked great, until this freezing-out problem.
if the SES-mode is internally permanently freezing me out on ethernet connectability, it appears i'm going to have to get a replacement ( as, other people on the web, similarly-situated, have stated).
my original purchase was about $60, but i see Amazon is recently selling the wtr54gs for $180!! -- i'm NOT buying a replacement at that cost!! please, either help me fix my frozen wtr54gs, or, since i'm
covered by warranty, tell me the procedure to get a replacement / exchange.
[Oh Thanks to Linksys for sending this to me!]: Thank you for your inquiry! As we strive to provide our customers with the best support experience, we are discontinuing the email support channel for Technical Support Inquiries.
Linksys listened, and created a wide variety of tailored support options designed to get you what you need, when you need it, in a way that works for you!

Frozen help

I dropped my blackberry z10 the top left corner cracked a lil but since my pho e has been frozen, stuck on screen. It won't let me like slide to open like my screen isn't working properly. I've tried holdingbutton for 10 sec and taking my battery out

Hi and Welcome to the Community!
Given your description and at an internet-distance, I can only deduce that the fall has caused some internal damage...which, of course, cannot be healed with software. Only in-hand evaluation by a qualified technician can provide you with a proper diagnosis and estimate. Given the fall, I doubt your warranty will be of any use...if you happen to have any insurance on the device, then that may well be useful. Otherwise, you will be looking at 100% out of pocket costs to repair the damage that has been done.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

On my 3rd HD STB due to frozen screen

Hello,
I did a quick keyword search on "frozen", "freeze" and "lock up"...but did not find any answers here.
I am on my 3rd HD set top box.
The previous 2 were bad according to Fios phone support.
Issue: Within one to three months, when turning on the STB and TV...the picture is frozen or goes to a black screen.
Sometimes there is sound initially, usually there is none.
On Screen Menu works fine, as does the "guide".
Ran the self test from the Menu...under settings and help, I think...and all tests PASSED.
You can select a different channel and the guide indicates it changed the channel, yet you are still watching the same frozen or black picture.
You could leave it on or turn it all off and an hour later, same thing...although the guide is current.
Support: I am a working guy and thankful to have a job. I don't want to meet the Fios tech, if I don't have to...so I call support via phone in the evenings, when I get home.
Much time, troubleshooting, unplug/replug cables, reset stb from their end, send other "commands" to it...finally they arrange to ship a new box (which is nice of them...so I don't have to meet a tech).
I get it installed and am up and going...for a while (see issue above and repeat support steps above).
So it did it again (on my 3rd STB) yesterday (4/25/09).
(insert negative, frustrated thought here)
I then think, let's see what happens with Video On Demand.
Select a free movie and it is playing normally!
Watch a minute of subtitles and think ok, let's go back to live HD...and it works.
Only things I can add are:
1. that the built-in DVR is maybe 1/2 to 3/4 full and when the condition happens
2. I can NOT access/play anything from the DVR when the condition happens
3. I do have 2 HD STB's, both with DVR (ask me and I'll explain) and 1 regular STB
Any help or insight to this issue would be greatly appreciated!

Hello and thanks for the reply,
It seems longer than 6 weeks that I have been having this issue.
The STB with the issue is better ventilated than the one that does not have an issue.
It is not out in the open, but is in a bigger armoire.
It is 5 feet higher than the STB that does not have the issue.
We got 3 cats and the fur-balls (not meaning the cats) do not fly that high, nor clog the vents of the STB...I checked and it is all clean (area is NOT used as a cat hideout).
I was asked to swap the location of both HD DVR's and did (between downstairs and the bedroom).
I am inclined to think the issue is the location, since the issue did not travel with the STB.
Verizon tech's did the install and set it up via MoCA.
They pulled new coax and did all terminations.
The location with the issue, did not become an issue until I added a second HD DVR to the home.
It replaced a standard def STB that was in the downstairs location.
The reason for 2 HD DVR STB's is that I was told (by Verizon FiOS sales) I could not program new content to be recorded, except while sitting in front of the TV that is connected to the HD DVR (this "hub" was originally upstairs).
It is useless to me if I can access content to be played (stream it from the hub), but not program new content to be recorded ("push" it to the hub from any STB).
Our main TV room is downstairs and I was not going to walk up and back downstairs.
Thus the "stand-alone", additional HD DVR stb...which I am okay with.
Because:
1. the hard drive currently won't hold much HD content (sharing with the wife)
2. Verizon has not figured out how to have a GUI/DVR/Firmware that lets you play AND program content from the same DVR via the Menu ("push" it to the hub from any STB).
So what are good numbers (signal to noise, db loss, attenuation, etc)?
What line tests or comparisons between HD DVR stb's can I do?
Both locations check out good (in the green) when running:
Help
Self Diagnostics
from the Main Menu of each HD DVR stb
I have a standard def STB in the guest room that stays plugged in, but is seldom used.
Thanks again to you and others, perhaps I can get some more input or ideas from you or the forum/techs/Verizon customers?

Frozen up screen with an icon of a battery with a red slash thru it??

I've never seen this one before. Out of the blue, my screen goes kinda dim and pic of a battery with red line stoking through it (kind of like a no smoking sign). It's frozen....no buttons do anything.
I've taken the batter out and re-inserted it, plugged in the charger....nothing works. What's going on here? Any ideas?
Thanks
Granton

The device doesn't recognize the battery as being inserted, OR more likely sees no charge on the battery.
Leave the device to charge 2-3 hours, and then, still connected to the USB cable, remove the the battery from the device a few seconds and reinsert it. If it boots--leave it to charge to 100% (check Options > Status for the percentage).
If it doesn't boot--try using a wall outlet charger if you are not. If you are connected via USB to the PC, make certain that you have Desktop Manager (or the USB device drivers) installed, which you can download below.
Make certain your USB cable is connected to one of the PC's main rear USB ports. Not a USB hub, nor a monitor USB port, nor a USB port on the front of the PC.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can only boot in Safe Mode -NVDA(Video): Channel exception! is this hardware or software and how much did it cost you to get it fixed out of warranty?

NVDA(Video): Channel exception! exception type = 0x1 = Fifo: Fifo Method Error
NVDA(Video): Channel exception! exception type = 0x6 = Fifo: Parse Error
My iMac freezes and crashes and I get the above message in the kernel log. I have done a few reinstalls from time machine but it comes back.
I get to the point where I want to erase the disk and do a clean install but I get afraid that the kernel will panic during install/ I will lose the registration keys to software/ or that I am just wasting my time.
Has anyone truly fixed this? Is an erase and install going to help?
My first crash happened a week or so after updating to 10.6.8. I was watching videos in full screen mode. When I pressed esc it froze. (Sometimes the audio continues but the iMac is frozen.)
So I stopped use Chrome but it followed me to Safari. I like YouTube Videos and can't watch them in safe mode -no sound.
After installing from a time machine back-up and just re-installing my Mac will boot normally but it doesn't last long and I often can't even boot to CD. It sometimes crashes in the finder.
What's going on?
This computer is old but should have tons of life left- if you've been here how did you get out of this mess?
How much is it going to cost me to get my computer back?
I can't do a hardware test because I don't know where the original disks are but tech tools and the system profiler assure me everything is OK.
Any moral support is welcome.

It could be a failing drive or logicboard (GPU), it is old and has probably served you well, you can take to an Apple store and they will diagnose it for free, and give you your options, but it is old and are you willing to pay much money to have it repaired? You are probably better off replacing it.
There is some software for data ercovery such as Disk Warrior, but it's not cheap.
Or ask about this program
http://nwsinglespeed.hubpages.com/hub/Do-You-Know-About-Apples-Flat-Rate-Repair- Pricing
You can try shutting down and try a SMC reset
http://support.apple.com/kb/HT3964
and see if it will boot, if it does try to do a back up, but something sounds as though it may be in failure mode.
Good luck

Vds_add_vd() error and frozen guest domain

Hello all,
trying to setup a guest domain but getting a frozen domain at the end of the process. Seems to be a combination of some other issues on the forum. Commands run...
# ldm add-domain myldom1
# ldm add-vcpu 8 myldom1
# ldm add-memory 4G myldom1
# ldm add-vnet vnet1 primary-vsw0 myldom1
# ldm add-vdsdev /dev/dsk/c0t3d0s2 vol1@primary-vds0
# ldm add-vdisk vdisk1 vol1@primary-vds0 myldom1
# ldm set-variable auto-boot\?=false myldom1
# ldm set-variable boot-device=/virtual-devices@100/channel-devices@200/disk@0 myldom1
# ldm bind-domain myldom1
# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 3.2% 6m
myldom1 bound ----- 5000 8 4G
# ldm list-bindings myldom1
Name: myldom1
State: bound
Flags:
OS:
Util:
Uptime:
Vcpu: 8
vid pid util strand
0 4 100%
1 5 100%
2 6 100%
3 7 100%
4 8 100%
5 9 100%
6 10 100%
7 11 100%
Memory: 4G
real-addr phys-addr size
0x8000000 0x88000000 4G
Vars: auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Vnet: vnet1
mac-addr=0:14:4f:f9:f7:be
service: primary-vsw0 @ primary
[LDC: 0x1]
Vdisk: vdisk1 vol1@primary-vds0
service: primary-vds0 @ primary
[LDC: 0x2]
Vcons: [via LDC:3]
myldom1@primary-vcc0 [port:5000]
# ldm start-domain myldom1
LDom myldom1 started
# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 0.6% 7m
myldom1 active -t--- 5000 8 4G 100% 7s
# telnet localhost 5000
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
Trying ::1...
telnet: Unable to connect to remote host: Network is unreachable
and in /var/adm/messages...
May 23 11:38:11 isdsyddev13 vds: [ID 556514 kern.info] vds_add_vd(): Failed to add vdisk ID 0
Tried stopping/unbinding the domain and then rebooting the primary domain, still doesn't work. Removed the guest domain, rebooted, recreated, still doesn't work. Any ideas on what else I can try? Thanks

Hi merwick,
thanks for the reply. Running sol10 11/06 (u3) with patch 124921. The disk wasn't in use anywhere else but vxvm is installed on the box which got me thinking. Seems I was getting hit by the veritas DMP issue (bug 6522993) even though the disk in question wasn't being used by vxvm directly. A "vxdisk rm" solved the issues. So first guest domain up and running :) Happy days. Uninstalled vxvm from the system as well and am off to try out zfs as boot disks (as described in the Ldom admin guide). Thanks again.

Curve 8520 completely frozen!!

Help please had my bb curve since xmas. It has been freezing up the last couple of days. I downloaded I took this on my phone app from bb apps and since then its completely frozen, cant switch on or off and just have a message that the phone cannot access data. I have tried taking battery out and leaving for over 10 mins, cant do a soft or hard reset as need to get into the phone and cant.
Any help appreciated.

Hi and Welcome to the Forums!
lulublue wrote:
I downloaded I took this on my phone app from bb apps...
I'm not at all sure what you were trying to communicate there...
lulublue wrote:
just have a message that the phone cannot access data.
Is that the exact error message? The exact syntax would help in researching...
lulublue wrote:
cant do a soft or hard reset as need to get into the phone and cant.
It is highly likely that you won't be able to -- hopefully you already have a good backup of your data.
Let us know what you meant by the above items and we'll figure out how to proceed.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Global Resource Directory frozen oracle rac database

I have 2 node oracle cluster on x86_64 solaris 10 system and i am getting the following error while starting asm instance on node2.
Here are the error in the log file.
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
IPC Send timeout detected. Sender: ospid 2388 [[email protected] (PING)]
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
I have disable the firewalls on both the nodes.
Can any one please help me on this.

Without four digit version info?
No way, Jose
Sybrand Bakker
Senior Oracle DBA

Channel Frozen

Similar Messages

Maybe you are looking for