Check-in original automatically after changing the original

Hi all,
Sorry for my bad english.
I create a document from MM02 with xls original. I don't see CV01N. This original is check-in automatically : good !
I don't want manage version or status.
I wan't modify this xls originals from MM02. I see CV02N. I modify the original and when I save and close excel then CV02N automatically closes. My xls original is not check in. Why ?
I tried to use the status (with archive automatically) but it's the same...
Can you help me please ?
Thanks

In SPRO --> Unde Define workstation application Maintain application type 2 (change ) for the XLS application type.
and when ever you wanna change the excel sheet attached in a DIR, go in change mode (CV02N) right click on the original file and click on process under...there will be a popup screen just click ok....
the excel sheet will open and will allow you to edit.
once you edit the document SAVE the DIR.
next time if you open the document it will show with the latest changes.

Similar Messages

My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

My canon sx120 is continues to show low battery and shuts off even after changing the batteries. Any suggestions? Do I need to send it for repair somewhere, and if so, where?

Hi LB!
Thank you for posting on our forum!
Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth. If the same warning still displays, then the camera will need to be serviced. To start the repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I do not know what I should phone is locked after changing the operating system

I do not know what I should phone is locked after changing the operating system , have the original box , receipt lost, Apple said that it is necessary to support the receipt of the first as I can not find the receipt of the first purchase when I moved to another country . I now throw my iPhone ?

It depends what you mean by 'locked' - it can mean locked by a passcode or linked only to one particular carrier (service provider). If the latter, see the post above; if it's a passcode issue:
1. Assuming this was bought new and you have set up Activation Lock and forgotten the passcode, please see this page:
http://www.lifehacker.co.uk/2011/10/24/youve-forgotten-iphones-passcode
2. If you bought it second-hand (used) - though this is not the impression I get from you post - then only the previous owner can unlock it.

How to create check in batch automatically after automatic payment program

Hello
SAP Experts i am getting a issue
how to create check in batch automatically after automatic payment program ( t code is f110)
Thanks & Regards
Narendra.G

Hi Narendra,
Please note the process below for cheque Printing:-
1. The pre requisite for Cheque printing is you have used program RFFOUS_c/or the Z version of this program in FBZP and that you have maintained the form name in the field Form name for Payment medium in FBZP.
2. You have a pre printed stationary on which you want to print and the Program & the form has been modified to print as per this.
3. In F110, you must have assigned the Variant name, which would specify the cheque lot no. and this should exactly match with the current cheque no. in the pre printed stationary.
4. Now, after all this setting, when you run Payment run in F110, then also only the Payment documents are posted but the cheque no.s are not updated in the Payment document no. nor the PAYR table is updated. It is only when you run the Print out tab, that a spool is created in SP01 for cheque printing as per the Payment documents.
5. Then in SP01, you can print the spool on your pre printed stationary.
This is the complete process of printing cheques from F110. Hope this helps..
Regards,
SAPFICO

I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

How about extensions? Perhaps you have an adblock extension installed.
Check Safari > Preferences > Extensions

How a new output message will be created automatically after changing a PO?

Dear friends,
How to generate a new output message automatically after changing a PO and saving it?
Thx & Regds
Amitava

Hi,
System only takes automatically the Output message in PO in creation mode in ME21N ( Only if you have maintained the condition record MN04)
If you have not maintained Condition record in creation of PO also you need to maintain manually.
But once you changed the PO system will not automatically pick up the new Output message, you have to manuallly input the Output messages in change mode of PO - ME22N.
You can also use ME9F for this.
rgds
gsc

Interface getting failed after changing the Business system to that service

Hello All,
Our Env... is XI 3.0 and this is related to produciton env.
Based on our client requirment to change the business system from client 871 to 100 for one of the R3 system which is reciever type(rfc).
After doing all the necessary changes , that particular service is getting failed and in the CC monitoring for that service I can see the log as "RFC_ERROR_LOGIN_FAILURE" mandate 871 (earlier client) does not exist in the system.
The steps which I have followed to change the Business system.
1>I loged into the SLD of PRD system and clicked on businsess landscape .then i have clicked on the specified system to be changed (RY1 ) and then clicked on change mode and selected the required client (100) and saved the settings.
2>I have logged into ID(Integration Directory) and selected the service (RY1) which need to be changed .Under service -->Adaper specific -->compare sld configurations and then clicked on apply changes.
3>Now selected that communication channel of service (RY1) RFCRecieverR3 and changed the client 871 to 100 and the password of user XIRFCUSER ...
Then i saved the changes and after that i have activated that interface.
After that when i logged into CC monitoring and viewed that service channels and see the following errors:
Receiver channel 'RFCReceiverR3' for party '', service 'RY1'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Mandante 871 não existente no sistema (selecionar mandante existente)
Can any one help me out of this situation , and i need to fix this ASAP as this is production system.
Awaiting for your reply.
Best Regards
Rakesh Reddy

Hello Nisar
Thanks for the update,
Let me say few points about this particular problem:
1>The interface "XX" from XI sends data to two systems( R3 -->RP1 & RY1), some thing like branched (same data is passed to both the reciever systems).
And the second RY1 is copy of First system RP1 (Production sys) which is used for data loading purpose and every week there will be a refresh from First sys (RP1) to Second(RY1).
2>Now the first sys(RP1) is recieving the data successfully from XI , and the second one (RY1) is getting failed .And this started after changing the Business system 871 to 100 .
3>As mentioned by you , I have checked all the points mentioned
    i)In SM59 for XI (ABAP part) two rfc's are maintained (LCRSAPRFC & SAPSLDAPI) and the test connection is also fine...But I did not find these two connections in reciever systems(RP1 & RY1 too).
   ii)In reciever system RY1 ,when i went to RZ70 , i did not noticed any special settings and SLD Bridge :Gateway Information is not maitained over there .and the same thing in other reciever system(RP1) , with this can we confirm that there is nothing wrong in RZ70 settings.
   iii)In SLDAPICUST at recievers end for both systems nothing is mantained , where as in XI system all the details are maintained(Host name,port, user & password).
I have translated the error log into english from the CC monitoring for this interface which is in portuguese language .
It says that:
RFC_ERROR_LOGON_FAILURE: 871 Mandante not in the system (select principal existing)
Kindly advise me what to do ..for fixing this problem(this is pretty urgent and it is production env...)..
If any information required , I can provide that.
Best Regards
Rakesh Reddy

MG3100 Cannon Printer, after changing the black prints misallied, and I have manually aligned??

After changing the black ink cartridge on my Cannon MG3100, when I print word and from the internet the prints are all misaligned and I have manually done the print head alignment, print alignment values, cleaned the nozzles, cleaned elements and clenaed the roller. I even brought the ink cartridge back to Staples thinking it was defective, but it still will not print correctly, does anyone have any answers please? Thank you! DD

Hi DD,
If you have replaced the ink cartridge with a Canon genuine ink cartridge and have already performed both automatic and manual print head alignments as well as cleanings and are still experiencing alignment issues, the printer will require servicing. Please Contact Us for your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How can I re-activate eBooks in Adobe Digital Editions after changing the mother board of my MacBookPro?

After changing the mother board of my MacBookPro to fix the video display issue, all my previous eBooks in Adobe Digital Editions cannot be activated. The error message: "Activation Server error - code E_ADEPT_INTERNAL". Please advise what I can do to read my eBooks again?

Hmm, it shouldn't be that much of a problem. I searched my entire drive for "digital editions", and this is the whole thing:
/Applications/Adobe Digital Editions 3.0.app
/Users/user/Library/Caches/com.adobe.adobedigitaleditions.app
/Users/user/Documents/Digital Editions
/Users/user/Library/Preferences/com.adobe.adobedigitaleditions.app.plist
/private/var/db/receipts/com.adobe.adobedigitaleditions.app.bom
/private/var/db/receipts/com.adobe.adobedigitaleditions.app.plist
/Library/Preferences/com.adobe.DigitalEditions.plist
The application itself, three small files scattered in your user account, to unimportant installation receipt files, and another preference file in the root Library folder. Removing those should remove everything related to version 3, which is what I have installed.
Where I substituted "user" above (for the three entries of /Users/user/...), replace that with whatever the actual name of your user account is.
Edit: I double checked the installer using a small app that sorts out every file in an installer, and where each item would normally be installed. The main app is literally the only item in the installer. The receipts are created by the OS per the installer's data, and the other minor preference files are created when the app is first run. There is nothing else.

Will the penfailure be solved after changing the cartridges? Installing printer again did not help.

Hp Print Diagnnostic Utility detected 'Pen Failure' I tried reinstalling printer driver again, checked cartridges installation for correctness, cleaned contact points but they did not help. Will the penfailure be solved after changing the cartridges? Installing printer again did not help.
Rajein

Yes, I did try it.
I completely uninstalled Firefox (including personal settings, bookmarks, add-ons etc.) and then I installed Firefox 24 from scratch. The outcome is unchanged. Namely, it installs it and then right when it is about to start for the very first time, it hangs. If I run the task manager I can see the process firefox32. It shows as if it is running. But in fact it is hanging doing nothing. It is almost as if the process is waiting for something to happen and that never occurs. Note that this should not have anything to do with, say, an incompatible add-on/plug in because I had them all removed. I also removed adobe flash prior to the installation and run the malware removal program too.

Films - Movies not Working or corrupted in iTunes after changing the album artwork

After trying to change the album artwork for some movies I own, I realized that such movie unplayable after such change and I cannot even revert what I have done. More, it seems like if you press on the "get info" section of the movie, you will notice that the artwork tab is gone and therefore, it’s like the movie is corrupted after changing the artwork. Any ideas? Has anyone encountered this before?

Just checked and I have the updated itunes 8.0.1 with the poster frame problem.
I finally found a fix for the movie album artwork problem.
After realizing several movies had the same poster frame as one of the movies. I deleted the movie with the common poster frame which had been copied to other movies. The other poster frames changed on the other movies because they no longer had a reference to the file from which the poster frame was copied. So I copied the deleted movie back into itunes and then got to thinking that perhaps there is something else in common with the movies which displayed the same poster frame. I found that I had set the album field to the same title. So I changed the album field file by file, to something else. Then I set the poster frame after playing a few seconds of the video at a point where I wanted the frame set to the current frame. I got a film icon on the movie icon for a few seconds while it changed it. Sometimes I had to repeat selecting the different poster frames for each movie because it didn't take the first time... the second time I selected a different poster frame it was then set to the first poster frame that I selected. So now the movies which all had the same album "Aviation" now are all changed to "Flight Training" Of course, now the poster frames for those movies are all the same poster frame but at least they are correct for the type of movie.
So if the album name is set to the same thing on several different movies they will all have the same poster frame.

Unable to discover machines through SCOM after changing the IP range

Hello,
Last week in my company IP range was changed to class A network from class C network,before changing the IP range everything was working fine.but after changing the IP i am unable to discover any client machine through agent discovery and unable to install
agent over SCOM console
any help will be thankfull
regards,
angs

pinging is happening from both the servers from MS and client pc.
but from ms am not getting the server name if using -a command in front of ip.
nslookup is resolving.
recently in my firm the primary dns server is changed,i checked in dns host entry.management server is
registered perfectly
regards,
Nikhil

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

I can sign on to the iTunes store using my ID but when I want to check my billing information (to change the existing info) it wont accept my password? What do I do?

Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296

PDF in Word after changing the old PC

How can I use the Adobe ExportPDF after changing the crashed and old PC

Hi Zis,
I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
Please let us know if you need additional assistance.
Best,
Sara

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

Check-in original automatically after changing the original

Similar Messages

Maybe you are looking for