Cisco Enterprise Attendant Console 8.0 - Second Console Queue

Hello Guys,
We have 1 reception console in the head office and we want to setup 2nd reception console in different location (London).
we have 2 operators license on CUEAC, I setup second operator with a seperat queue. We want to redirect the calls to London auto attendant (unity) when the second console is not "logged in" or busy. Right now they both are going to head office auto attendant in the Unity.
Is it possible to keep them seperate so each queue can point to its prompts in the Unity?
Thanks
Sunny

i dont have this option, I am running System Version: 8.0.0.5. Does that mean I have to upgrade? I was looking into upgrading to version 9 but I am not sure if the upgrade is free and if there will be any issue upgrading.

Similar Messages

  • Cisco unified Attendant Console reports

    Hi,
    We have a customer with Cisco Unified Enterprise Attendant Console 8.5.1.5 interested in operator reports. They have more than one operator per queue. There is a report with attended operator calls but no abandoned. Is there any way to get the abandoned calls by operator (not by queue)?
    Thanks in advance
    Laura

    Hi Laura,
    As the calls route through the queues this where calls are abandoned, calls are not routed directly to the operators phone hence why there is no report for this against a user.
    Jamie

  • Maintaining the Directory in Cisco CallManager Attendant console

    I have names in the directory of the cisco callmanager attendant console users that no longer work for the company. The numbers and names have been deleted from the call manager but not the directory used by the attendant console. How do I go about cleaning up the directory for the attendant console?

    Hi,
    Thanks for the doc..4* for the info.
    This basically explains what I've checked already. Cynth, seeing as you've checked on the AC PC that there's no userlists file, and we now know you have 2 files present on the callmanager I would suggest the following to resolve your problem:
    1) Delete both the AutoGenerated.txt and CorporateDirectory.txt from the CallManager Attendant Console directory (I've put the path in my previous post). You can copy them off this directory if you want a copy for keep safe.
    2) Re-start the TCD service again.
    3) Shut down the AC client and re-open it.
    This should basically re-populate the directory on the CallManager (once you re-start the service). Then when you open up AC again it should copy across the up-to-date corporate directory list.
    Please rate useful posts...

  • Unified Communications Attendant console: queue does not show in the client

    Hello,
    I have Cisco Unified Attendant Console - Department Edition 9.1.1.10 in conjunction with CUCM 9.1.1.
    My problem is that when I login with the operator account to the client the queue does not show up as expected.
    I have configured the queue, synchronized with CUCM, i can see it in CUCM under device/CTI route point, i have associated the queue to the operator in user configuration queue association.
    but when i login as the opeartor to the client i can not see it.
    any help is apreciated.
    thanks

    Hi,
    This is working correctly, as you can only associated a single queue (department), this is not displayed in the operator console client.
    You only see the queue list in Business, Enterprise or Premium Edition.
    Jamie

  • Cisco Unified Attendant Consoles for Be6000

    Hi
    I would like to know if there is limitation in teh directory sync from Cucm, ex, do the user need to have a directory number to be synced.
    I have a setup and right now I have about 100 users but only 2 users have a directory number and these are the only 2 users I can see in attendant console, but in Cucm users I can see all the suers.
    Regards Bjørn                  

    Bjorn,
    It depends on the CUAC Edtion and the source you are using.
    If you are using Departmenr, Business or Enterprise Edition then the sync is done with the CUCM and therefore the telephone number field against End Users must be populated in order for the contact to be seen in the CUAC directory.
    This is the same for Premium Edition if syncing with CUCM but you can also sync directly with AD, in this case the telephone number field or IP Phone field (or whatever field you are using to pull through the contact number) must be populated.
    I agree with your point about there being a use case for people in the directory without a telephone number, I will raise this with the product team and request an enhancement.
    Jamie

  • Cisco Unified Enterprise Attended Console License issue

    Hi Guys,
    We have a CUEAC 8.6.2. It was having some issues and we restarted the server. After the restart when I log into webadmin the
    system configuration tab is missing. I think this is because of the license. I got the license file and when I try to apply the same it says invalid license or registration code. It looks like the registration code in there is wrong and when I try to change it it does not allow me to make any changes to it. Any ideas how can I change the registration code ?
    Thanks Guys 

    Hi,
    Regsitration code is one time activity after u install application.
    If you do any of the following you must re-license the software with a new registration code:
    • Reinstall the operating system on the same hardware 
    • Install a different operating system on the same hardware 
    • Add or remove certain hardware (such as an NIC card) 
    • Change the machine name 
    • Perform a major upgrade
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/cuacs/10_5_1/install_admin_guide/CUACS1051GUIDE.pdf
    So, try changing the machine name on same HW to get new Regsitration code.This is what I think.
    regds,
    aman

  • Cisco Unified Attendant Console Upgrade

    All - I currently have CUEAC 8.6.1, and I am looking to get to 10.0.1.
    Can I upgrade to CUEAC 9.1.1, and then upgrade to 10.0.1?
    I found a document that stated I can do upgrade migration from 9.1.1 to 10.0.1, but couldnt find any specific details.
    Any help would be appreciated!
    Thanks,
    Jaime

    Hi Jaime,
    Please check page 3 of the following doc
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/10_0_1/release_notes/Cisco_Unified_Attendant_Console_Advanced_Release_Notes_10-0-1-10.pdf
    You can upgrade from 8.6.2 to 10.0. directly as well as 8.6.2 to 9.1 and then to 10.0.
    HTH
    Manish

  • High Available Attendant console for BE6K?

    Hi Arun and team,
    Where is it documented whether or not BE6K supports the new release 9.0 High Available Premium Attendant console?
    The BE6K data sheet says supports "Cisco Unified Attendant Consoles" and then gives a specification of 500 max users and 12 attendants (implying Business Attendant) and that cant be right since BE6K supports 1000 users.
    The Data Sheets for the Attendants dont really say if they are compatible with BE6K.In fact, the CUEAC implies it wouldnt work on BE6K since its says it needs 'specs based support'
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CUACDE_Rel_N_9_0_1_10.pdf
    This should be an easy thing to find ;-(
    Anyone know where I can find it?
    Thanks,
    Steve

    Nihal
    May I suggest kindly cleaning up the documentation so that this is laid out clearly to all of us. This one gives you the impression no change is to be made to the OVA no matter what the console is.
    http://docwiki.cisco.com/wiki/Cisco_Business_Edition_6000_OVA/OVF_Templates#Unified_Attendant_Consoles
    Then we move to the data sheet
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps11369/data_sheet_c78-638921.html
    Cisco Unified Attendant Consoles is designed specifically for customers with a maximum of 500 IP phones and 12 operators concurrently logged in
    So does that mean even if you have premium we can only do 500 Phones and 12 operators? That doesn't sound right.
    Next I have this deck from Cisco that says only 25 operators supported. Screen shot attached. So what are the maximums for each type of console supported by the BE6K BU(CUB, CUD, CUE and CUPAC)
    Thanks
    Srini

  • Attendant console issues

    I upgraded call manager from 5.1(2) to 6.1(2). I upgraded attendant console for the reception. Most of the features are working.
    When the call come in attendant console does not see an incoming call under CALL PROCESSING window.
    Please advise..
    Thanks

    If you do not configure the user, the attendant console cannot interact with CTIManager, and the attendant cannot receive calls so configure the user.
    Cisco CallManager Attendant Console Frequently Asked Questions.
    http://www.cisco.com/en/US/products/ps7282/products_qanda_item09186a00800b0a20.shtml
    Cisco CallManager Attendant Console Issues
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/trouble/4_0_1/tb401c10.html#wp1000555

  • SPA500S Attendant Console BLF and Broadsoft NOT working on firmware 7.4.6

    Like many of us, for many years now, have continous problems with the Cisco SPA500S Attendant Console. In my case, I'm running my phones with 7.4.6 because it is the version of the Cisco SPA504/508G phone firmware that is certified to work on our current version of Broadsoft's Hosted PBX.
    The phones work very well indeed, but the attendant console lights up after a re-boot of the BLF phone is performed, however, the actual SPA500S unit doesn't perform onitoring at all.
    I've read every blog/discussino on this matter and it is becoming a nuisance at this point. I dont understand why it takes so much trouble to configure something so easy and what a stark difference there seems to be when you upgrade SPA50XG phones on the firmware from one firmware release to the next one.
    I'm looking for anyone that has had this issue that can help me configure the Cisco SPA508G phone that servers as the monitoring phone with a single SPA500S Attendant Console unit to monitor 4 extensions.
    Jose A.

    We just installed an new system with the SPA508g phones and the SPA 500s Side Car and are having the same monitoring issues. We have notified our support and they have been tweeking our system quite a  bit. If this is a known issue why is CISCO not resolving it. Does CISCO monitor these forums?

  • # of Attendant Console Users that CCM 3.3 can handle

    We have been told by various Cisco Sources that CCM 3.3 can handle unlimited Attendant Console Users and installs. Yet, other Cisco Sources say that CCM 3.3 can only handle up to a fixed amount. So which one is true?

    I don't see any such restrictions mentioned in any document. I guess it all depends on the number of device weights a CCM can manage. You may like to verify the same from
    Cisco CallManager Attendant Console
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801eff7c.html

  • CUAC 10 Advanced / Unified Attendant Console silent install

    Is it possible to push / silent install the Cisco Unified Attendant Console 10.x Advanced client ?    

    Currently, it is not possible to push/silently install the Advanced client. We are in the process of completing a deployment tool that will make this possible for Standard but would need to explore the option for Advanced.

  • Problem with Cisco Attendant console

                       Hi
    We Have Cisco attendant console 8.x at site .
    As per user they are
    " able to log into the “Attendant Console” and access the outgoing numbers located at the bottom of the screen. As far as the internal directory, it does not allow them to access due to the database connection issue. They are getting error “database not connected” on Attendant Console.
    Can you please suggest solution to resolve this . Thanks
    RJ

    Have a look at this link on page 33 and 34:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucmac/arc/CiscoTSGv8_6_x.pdf
    Directory Issues
    Directory will not display and C
    onsole shows "Database not connected"
    message
    On the Attendant Console PC:
    Verify that the Windows User has Full Control access to the following registry key and it’s child
    objects: HKEY_LOCAL_MACHINE\Softwar
    e\Arc Solutions (See, the section
    “Client preferences
    do not save / are not retained” section on page
    4-4
    which shows how the permissions can be found
    and changed). (If version is older than 8.0.3 verify HKEY_LOCAL_MACHINE\Software\Borland
    as w
    ell)
    Verify that the CUEAC Server can be pinged from the command line by IP Address and Hostname
    If it cannot be reached via hostname, have this ad
    ded to DNS or to the host file on the machine.
    On the CUEAC Server:
    Ensure that the contact database is populated:
    Open a synchronization log file in C:\Program
    Files\Cisco\Logging\LDAP\Log\SSLog_xxxx.txt
    Check that contacts have been inserted or updated:

  • Issue when I upload CSV file for insert contact list on Cisco Attendant Console Advanced

    Hi Friends,
    I have error "Provided file is not valid CSV File" when I upload CSV file to Cisco Attendant Console Advanced system. I'm not sure what happen about my CSV. My purpose is insert contact list to system and create CSV base on documentation.
    Anyone have idea to solve this issue please kindly help me.
    Thanks

    You are right, whenever Cisco device boots, the IOS files gets loaded on the DRAM.
    But in this process, some temporary files are also generated which gets saved in the flash/Disk, that’s the only reason you got these error messages. It’s not recommended at all to have less space in the Flash than what is recommended on Cisco.com. I would say please remove some files from Disk and have minimum 256 MB flash otherwise your router may drop into rommon mode at the time of next reload.
    Well, it’s good to upgrade the bootstarp image too. Currently you are running 15.X IOS code, I would say run 15.X bootstarp image on the box.
    You may download bootstarp image for 7206VRX NPEG2 from the link below:-
    http://software.cisco.com/download/release.html?mdfid=282188585&flowid=1380&softwareid=280805685&release=15.2.4S4&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    If you want to know the procedure of the upgrade, click the link mentioned below:-
    http://www.cisco.com/en/US/docs/ios/12_2/configfun/command/reference/frf010.html#wp1017654
    -Amant

  • Cisco Attendant Console

    Hi
    We are using UCM version 10.5.1. Can someone guide me on how to add attendant console users? That is, need to provide access to Cisco Attendant console to 2 new users.
    Thanks for the assistance.
    Rajeswari

    Hi Aaron,
    Greetings!
    Thank you very much for your quick response. Yes. I am able to login to Attendant Console server via https://ipaddress/webadmin.
    The 2 new users are already added in the CUCM. In Attendant Console webpage, I presume I need to click on "User Configuration"=> Operator Management and add the new user. Once this is done, I guess we need to select the appropriate queue while configuring the operator profile. Am I right.
    Thanks again for the clarification.
    Rajeswari

Maybe you are looking for

  • BI 7.0 Infoset - Infocube - Left outer join - query

    Hi Expert, A infoset contain Infocube and ODS, linked with left outer join, common fields are PO,PO item.  PO account assignment ODS have three keyfields: PO Doc.,Item,account Assignment  .      PO  Infocube                                     <b>PO

  • Problem with window.close and window.open

    I am having two suspected Actionscript problems which only seem to be happening with Flash player 9 and later. BACKGROUND: I have a client who needs browser-launched swf files to play from a CD-ROM (I do not want to use the Flash projector).  These f

  • Maintain Services or Limits in BAPI_PO_CREATE1

    Great day Friends, Its my first day on SDN. Hoping to find helpful answers here and Wish you luck for your career also. I am working on BAPI_PO_CREATE1. I've used following tables. return poitem poitemx poaccount poaccountx poservices I've passed the

  • Why did this fix my adobe Air install problem?

    I had Air installed which I needed to run this porgram You Select it which needs adobe flash and Air to run.. The other day the program would not open up. I tried a number of things could not get it to work. Deleted the program, and tried installing

  • Colors of guide on Xfinity

    Can anybody tell me a way to change the colors on the guide? The current colors make it almost impossible for me to read from my normal viewing range (about 8 - 10 ft).. I have to admit I am 75 but I had no problem with the old comcast display, but i