Cisco unified Attendant Console reports

Hi,
We have a customer with Cisco Unified Enterprise Attendant Console 8.5.1.5 interested in operator reports. They have more than one operator per queue. There is a report with attended operator calls but no abandoned. Is there any way to get the abandoned calls by operator (not by queue)?
Thanks in advance
Laura

Hi Laura,
As the calls route through the queues this where calls are abandoned, calls are not routed directly to the operators phone hence why there is no report for this against a user.
Jamie

Similar Messages

Cisco Unified Attendant Consoles for Be6000

Hi
I would like to know if there is limitation in teh directory sync from Cucm, ex, do the user need to have a directory number to be synced.
I have a setup and right now I have about 100 users but only 2 users have a directory number and these are the only 2 users I can see in attendant console, but in Cucm users I can see all the suers.
Regards Bjørn

Bjorn,
It depends on the CUAC Edtion and the source you are using.
If you are using Departmenr, Business or Enterprise Edition then the sync is done with the CUCM and therefore the telephone number field against End Users must be populated in order for the contact to be seen in the CUAC directory.
This is the same for Premium Edition if syncing with CUCM but you can also sync directly with AD, in this case the telephone number field or IP Phone field (or whatever field you are using to pull through the contact number) must be populated.
I agree with your point about there being a use case for people in the directory without a telephone number, I will raise this with the product team and request an enhancement.
Jamie

Cisco Unified Attendant Console Upgrade

All - I currently have CUEAC 8.6.1, and I am looking to get to 10.0.1.
Can I upgrade to CUEAC 9.1.1, and then upgrade to 10.0.1?
I found a document that stated I can do upgrade migration from 9.1.1 to 10.0.1, but couldnt find any specific details.
Any help would be appreciated!
Thanks,
Jaime

Hi Jaime,
Please check page 3 of the following doc
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucmac/10_0_1/release_notes/Cisco_Unified_Attendant_Console_Advanced_Release_Notes_10-0-1-10.pdf
You can upgrade from 8.6.2 to 10.0. directly as well as 8.6.2 to 9.1 and then to 10.0.
HTH
Manish

CUAC 10 Advanced / Unified Attendant Console silent install

Is it possible to push / silent install the Cisco Unified Attendant Console 10.x Advanced client ?

Currently, it is not possible to push/silently install the Advanced client. We are in the process of completing a deployment tool that will make this possible for Standard but would need to explore the option for Advanced.

Verifying data coming from Cisco Unified CCX Historical Reports

Good afternoon
I (along with a number of other colleagues) are heavily involved in a project to take data from a wide variety of different sources and merge it all into one system so that we can report on it in a joined-up manner.
The project comprises a number of different types of data source (such as Telephony or CRM). Within each data source type, we have various suppliers of those products. In the case of telephony data (which I'm looking into at the moment), the eventual aim is to make it possible to take data from any of the telephony platforms in use across our business (currently AVAYA, Alcatel and Cisco) and report on it in a uniform way, thus negating the need for an end-user to know what the Cisco definition of AHT is (for example).
The switch I'm currently looking at is a managed switch, meaning that we don't have any sort of direct access to the back-end database(s). We could probably get it, but I suspect that the company that manages it for us would probably charge a small fortune for that. In view of this, I'm working with a number of the standard reports in the Cisco Unified CCX system. My plan (at the moment anyway) is to identify the reports that we can use that will best provide details of all calls into and out of our contact centres. I'd be looking to get the exact details of each individual call, which could then be rolled up into manageable intervals (such as 15-minute or 30-minute).
Before I go much further, I'd like to be clear on something: I'm a database developer rather than a telecoms engineer so if I ask something that appears to be obvious then I apologise in advance. I've got quite a bit of experience of working with the CTI system that sits on top of our AVAYA platform, but it's proving to be a bit of a wrench effectively "un-learning" that system so that I can make room in my head for the Cisco solution.
So, what I've learned (or have guessed) so far is this:
When I run the Application Performance Analysis report, the Application Names that are returned are effectively the Call Routes that are set up in the system. Each Call Route can be fed by one or more Called Number (which I understand to essentially be a DDI);
The Application Summary Analysis report shows the same Application Name information as is shown in the Application Performance Report. However this report also shows the Called Number, thus providing slightly more information about the individual DDI being answered;
My next plan is to try and run an Agent-level report so that I can see exactly which calls each agent handled. This is where I've run into problems: I ran the CSQ - Agent Summary report for the whole of 17th October. I then ran the Agent Detail report for the same period, and ran it out to CSV so that I could "play" with the data. The CSQ - Agent Summary Report shows that a particular agent on a particular CSQ Name (ID) handled a total of 29 calls. However, if I filter the Agent Detail report for that agent and CSQ, I get a total of 30 calls and for the life of me am unable to identify where the missing call is coming from. Initially I'd thought it might be bacause the CSQ in question has two separate DDIs but as far as I can see, this is making no difference.
I NEED to be 100% sure that when I'm importing the data from the Cisco reports into our system, I am then able to mimic the types of reports that are coming from Cisco, with the same figures. Therefore, if anyone can help me, I'll be extremely grateful.
TIA
Ian Henderson

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Cisco Unified CCX Historical Reports 8.5 - question

Hi all,
Have a question regarding UCCX Historical Reports. Ran daily reports for "Agent Not Ready Reason Code" report for a complete week and exported them to Excel. Excel shows a SUM for daily values that differs from what UCCX shows in Weekly report.
Although it is a slight difference, I would like to know why UCCX and Excel display different values. Would it be due the way UCCX handles decimal value?
Image below shows the sum for the complete week and every one of the daily values
This is what Excel displays as a sum for same daily values:
Thanks so much for the help you can provide

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Maintaining the Directory in Cisco CallManager Attendant console

I have names in the directory of the cisco callmanager attendant console users that no longer work for the company. The numbers and names have been deleted from the call manager but not the directory used by the attendant console. How do I go about cleaning up the directory for the attendant console?

Hi,
Thanks for the doc..4* for the info.
This basically explains what I've checked already. Cynth, seeing as you've checked on the AC PC that there's no userlists file, and we now know you have 2 files present on the callmanager I would suggest the following to resolve your problem:
1) Delete both the AutoGenerated.txt and CorporateDirectory.txt from the CallManager Attendant Console directory (I've put the path in my previous post). You can copy them off this directory if you want a copy for keep safe.
2) Re-start the TCD service again.
3) Shut down the AC client and re-open it.
This should basically re-populate the directory on the CallManager (once you re-start the service). Then when you open up AC again it should copy across the up-to-date corporate directory list.
Please rate useful posts...

Customize Cisco Unified CCX historical report.

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi,
We are using UCCX 7.0. We want to Customize Cisco Unified CCX historical report. For example at Agent Login Logout Activity Report the first four (04) columns are Agent name, Extension, Login Time and Logout time. We want to change the Column order as follows. Login Time, Logout time, agent name and extension. Another thing, we want to add two more columns such as total ready time and total not ready time. So what will be the detailed procedure to accomplish these two tasks. Could anyone please help?
Regards
Fakhrul

This guide outlines how to do this:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/programming/guide/uccx70hradmdev.pdf

Excel formatting issue in Cisco Unified CCX Historical Reports

Hi Team,
We are using Cisco Call Manager 7.1.5.20000-6 & CCX version 7.0(1).
The data report pulled in PDF format is in perfectly alright but when i try to extract in Excel format it gets in destorted format.
The sub-titles dont get reflected, column width & line spacing is not proper.Kindly find the attached files of both the formats.
Plz suggest for the same.
Rgds,
Atul Kaul.

The "Cisco Unified CCX Historical Reports Scheduler" sits in my startup folder but seems like it doesn't "run" at startup. So I ran a "test":
- Manually right-clicked the "Cisco Unified CCX Historical Reports Scheduler" icon in the startup folder and chose "Run as Administrator"
I didn't log off or reboot PC and the reports are running again. I checked the "properties" of the icon and I did make sure it was already set to "Run this program as an Administrator" under the "Compatibility" tab.
Not sure why it's not working...
Thank you for any help you can provide....

Cisco Unified CCX Historical Reports

Hello,
Issue: The time showing on the Historical Reports are not correct
Error message/issue description:
While comparing the recorded calls from QM Management Destop system to the reporting system the timings on the historical reports appear to be at least an hour behind. Can these be synced to show the same times
Thanks !!
Shridhar Reddy

Hi Shridhar,
The time zone displayed in the report is either UTC or local time zone, based on the TIMEZONE settings in hrcconfig.ini. You can also change the time zone for each report as shown in the procedure.
Note: When a report shows date and time information for an event or an activity in the report data, that date and time is based on the TIMEZONE configuration in hrcconfig.ini.
The Start and End time is also based on the TIMEZONE configuration in hrcconfig.ini.
The difference between the server time and the selected time zone is displayed within parentheses beside the Start and End time.
The report generated time displayed at the bottom of the report is the local time of the HR client machine.
To change the time zone for a particular report, follow these steps:
Procedure:
Step 1: In the Unified CCX Historical Reports main window, choose the report settings that you want.
Step 2: Choose the Settings menu.
Note: You notice the check mark beside the Use UTC Time Zone for Reports menu option. This depends on the configuration in hrcconfig.ini.
If UTC time zone (value 1) is configured, the check mark is displayed. If local time zone (value 0 - Default) is configured, the check mark is not displayed. For more details, refer The hrcConfig.ini Configuration File, page 2-13.
Step 3Click Use UTC Time Zone for Reports to select or unselect the option manually.
Please refer the section "The hrcConfig.ini Configuration File" from page 33 onwards in the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
TIMEZONE:
Specifies the time zone that will be displayed in the Unified CCX Historical reports. This value can be preset before you login to Unified CCX Historical Reports client.
You can also change this value from the Historical Reports client user interface.
Valid values: 0 and 1
Value 0 - Historical report will display the time zone of the client’s machine.
Value 1 - Historical Report will display the UTC - GMT time zone.
Default value: 0
Note:The time and date for data in scheduled reports is always the time and date of the Cisco Unified CCX Historical Reporting database which is the UTC time zone.
Please refer the section "Changing the Time Zone to be Displayed for a Report" from page 142 onwards in the below link to do so,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/uccx85hrug.pdf
Hope it helps.
Anand
Please rate helpful posts !!

Cisco Unified CCX Historical Reports with Windows 8

Hello,
Our entreprise has changed this week our OS Windows XP to Windows 8.1.
But, when I install Cisco Unified CCX Historical Reports, I have a problem of compatibility, and I can’t install this software.
I can see that Cisco Unified CCX Historical Reports is end of life with Windows 8.
I would like know if another software able to do reports for our calling centers (numbers of calling receive, missed calls, etc.)?
Cisco Unified CCX Historical Reports actual vesion: 8.0(2.0)
Cisco CCX version 8.0.2
Call Manager version 7.1
Thanks,
Kévin L.

Do you mean like a third party solution? If so, there's many to choose from; just be sure to interview them and ask for a demo before you buy. I'm sure the SMSI folks will reply to this thread.
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Unified Attendant Console - License and Remote Site

I need an Attendant Console solution for a 6 site IPT design. I have CUCMBE at the corporate site with 5 remote locations. I want to have an Attendant Console in each location. I was going to use the Business Attendant version, but see it only support 3 Queues, thoguht I had read it was 6 queues, so I guess I need to go with the Enterprise version.
1. To support 6 active clients, I need to order 6 licenses at $2950.00? Seems awful expensive compared to the old Attendant Console...
2. Queues would need to be created for each site, Business only has 3, but Enterprise has 50?

Hehe Chris, you're right. I've always thought that this is only the language for the installation details, but I've just tried it on my PC.
Thanks a lot.
regards
Marc

Unified Attendant Console - UCSS Pricing

If I have 6 active licenses for any of the versions of Attendant Console, then do I need to order 6 instances of UCSS?

Hehe Chris, you're right. I've always thought that this is only the language for the installation details, but I've just tried it on my PC.
Thanks a lot.
regards
Marc

Cisco Enterprise Attendant Console 8.0 - Second Console Queue

Hello Guys,
We have 1 reception console in the head office and we want to setup 2nd reception console in different location (London).
we have 2 operators license on CUEAC, I setup second operator with a seperat queue. We want to redirect the calls to London auto attendant (unity) when the second console is not "logged in" or busy. Right now they both are going to head office auto attendant in the Unity.
Is it possible to keep them seperate so each queue can point to its prompts in the Unity?
Thanks
Sunny

i dont have this option, I am running System Version: 8.0.0.5. Does that mean I have to upgrade? I was looking into upgrading to version 9 but I am not sure if the upgrade is free and if there will be any issue upgrading.

Unified Communications Attendant console: queue does not show in the client

Hello,
I have Cisco Unified Attendant Console - Department Edition 9.1.1.10 in conjunction with CUCM 9.1.1.
My problem is that when I login with the operator account to the client the queue does not show up as expected.
I have configured the queue, synchronized with CUCM, i can see it in CUCM under device/CTI route point, i have associated the queue to the operator in user configuration queue association.
but when i login as the opeartor to the client i can not see it.
any help is apreciated.
thanks

Hi,
This is working correctly, as you can only associated a single queue (department), this is not displayed in the operator console client.
You only see the queue list in Business, Enterprise or Premium Edition.
Jamie

Cisco unified Attendant Console reports

Similar Messages

Maybe you are looking for