Cisco support contract

Dear sir,
I need to update my IPS Signature on ASA5510-AIP-SSM automatically, From my local Cisco representative i got 2 product numbers
to obtain the IP address of FTP server , username and password (Cisco support contract)
In this case which one should i use among:
1) CON-SU1-ASAINC10
2) CON-SU1-AS1A10K9
Thanx in advance

CON-SU1-ASAINC10 : This is the SMARTNET contract service agreement.CON-SU1-AS1A10K9 : This is the Cisco Software license agreement.
This is interesting.
1.      What is the difference between SMARNET & Cisco Software license agreements?
2.      What is the meaning of the following code?
     a.     CON
     b.     SU1
     c.      ASAINC10
     d.    AS1A10K9

Similar Messages

  • Cisco Support contract part number is needed !

    my company just ordered fornew LMS release and exactly needed the support to open TAC's .
    I searched but couldn't find the part number for this, some one send me this part number CON-PSUS-LMS410K9,
    I searched but I could not find anything usefull, it would be very appreciated if someone help me to work it out.
    thank you

    Hi Ali,
    I guess more than the part number if you enter the Serial number or contract covering your Ciscoworks can work for you.
    Contract is a must to open a TAC case. Moreover for further enquiry you can mail [email protected] who can assist you open a case with available details or you can call CIN @ 800-553-2447.
    -Thanks
    Vinod

  • Cisco support for third-party apps on SRE?

    Hi - I am thinking about running some third-party unified communications apps under VMWare ESXi5 on a Cisco SRE 900 module.   According to the Cisco docs, third-party apps are supported on these modules (see table below) but the app in question is NOT on Cisco's list below.  
    http://www.cisco.com/en/US/prod/collateral/modules/ps10598/data_sheet_c78-553913.html
    Some questions:
    1.  As long as the third-party app is capable of running under VMWare/VSphere ESXi5, is there anything on the SRE that would prevent you from running this third-party app even though it's not on Cisco's list?
    2.  What is Cisco's policy on the use of third-party apps that are not on their list?    For example, will they take a support call on the SRE running a non-listed app (I am not expecting them to help me with the app but I don't want to void any sort of support contract through the use of a third-party app not on their list).
    Thanks !

    As long as 3rd party app is capable of running on ESXi 5 it would run on SRE hardware. Cisco doesn't prevent these apps from running even if they are competitive. From a support perspective Cisco TAC will not take any support calls for these applications nor would know how to redirect the call to these 3rd party partners. Cisco TAC will only support SRE and ESXi related issues.

  • Support Contract wref to sales order-how to get serial number

    Hi Experts,
    Below is the scenario
    Step 1:I sell product[supplied by thirdparty] in sales order  123456
    Material number     Description      Qty
    material-0001         Printer             2
    Step 2:While purchase it from 3rd party it will be having serial number which can be entered manually while doing goods receipt. Eg:
    Material number        Description    Qty      Serial number
    Material-001              Printer           1         PS-10001  
    Material-001              Printer           1         PS-10002
    Step 3: Now I create a support contract with reference to the sales order 123456 for the sold printers.Here I need to capture the serial numbers of both printers, so that when customer complaints, the item can be identified.
    How can we achieve this in the contract?
    Waiting for a quick reply
    Thanks
    Banu

    Hi Banu,
    1. Create a Contract with Service product.
    a. Create a Service material in MM01, with material type DIEN
    b. Create a General Task list master (Tcode - IA05).
    c. Attach this Task list with the Service material using OISD Tcode (set the reference object Equipment - if your equipment and serial number are same) -->(Service Product)
    2.Attach the Technical objects (Equipment Number or Material number + Serial Number) to the line item service product.Maintain the contract data like price, start and end date.
    3. Create a Sales order VA01, with reference to the Contract document
    a. Configure this sales document type, material type to determine the Item category TAD
    b. Let this Item category has the Requirement type SERA (maintain Service order type in requirement class(230 as default)
    4. System will ask you the equipment number to create a Service order.
    5. Enter the Equipment number,
      System will ask you to select the Operations from the task list that has been attached with the Service product in step 1.c
    6. Save the sales order and open in Change mode.
    7. In Scheduled lines tab, you can find a "Service order button". Click on the button, will show the service order for the given Equipment number in display mode.
    You can edit the Service order IW32, and confirm the operations and issue materials to capture the actual cost and settle to the Sales order.
    Hope this would help.
    Regards,
    Babu.K

  • Does SRM SUS support contract negotiation from supplier point of view?

    Dear experts,
    could you please share your view on whether SRM sus support contract handling? can a supplier monitor contract fulfillment or potential expiry of a contract from SRM SUS side? can supplier take part in contract re negotiation from SUS side?
    As far as I know, SRM 7.01 supports scheduling agreement release in SRM SUS.
    Your thoughts will be highly appreciated.
    Thanks and regards,
    Ranjan

    Dear Sam,
    Thanks for the reply. Then, can we enable our suppliers to monitor contract from Supplier Portal in the SRM server itself like the way Suppliers can participate in the bidding in the SRM server? Any thoughts or input will be highly appreciated as my client wants to enable suppliers to monitor expiry of the contracts from their side.
    Thanks and regards,
    Ranjan

  • Oracle Support Contract

    I wonder how other users feel about transition of support from Primavera to Oracle.
    Here is some thought I have on it, I hope some of you can help me understand why it is as it is.
    Contract*
    We have huge problem with signing/renewing Support Contract. We've asked Oracle for quotation end of October and still did not receive any price offer. I've email to at least 7 Oracle employees, tried to escalate it but still - there is no offer in my inbox.
    Perhaps our licenses setup is a bit strange for Oracle, but for Primavera it was fine - I have CM licenses in several offices divided into groups, in some offices I don’t need to update to CM13 (which is far too buggy to install it in offices which do not have in-house support). Also for other reasons I simply do not want to keep maintenance contract for all licenses.
    Oracle uses License Sets that MUST contain all licenses of the same product and they want me to buy maintenance for all licenses, no matter if I use support for them or not.
    Looks like they want to protect themselves from companies who will buy maintenance for one license and use it for 100 licenses? Well then why with CM13 they skipped concurrent users limit hardcoded in the application?
    Well I don’t want to trash licenses of xx K $ worth! Since Primavera had it set up like that, why Oracle seats in and changes the rules without my knowledge and permit?
    My Oracle Support*
    I have feeling that there is less support now. SR's don’t get updated as often, information about updates of SR is giving wrong info. Email notification is not working in my case. SR history for some reason contains spam notifications of updating SR...
    I miss the chat feature form POINT - initiate chat and get response the same hour...
    After updating a SR there is some kind of confirmation msg that gets stuck under the window, very often I cannot update or read SRs due to numerous "network/IO/communication" errors.
    I'm sorry but besides having a BUG list (finally!) i find My Oracle Support a well-dressed downgrade from POINT.
    In general this post turned out pretty negative, which was not the intention. Hope some of you will post positive comments on Oracle Support.

    Hi people,
    Well it looks like we all have problems. Although I can log into My Support, I cannot create new SRs. After 3 weeks of trying to get Oracle to do something about this they tell me it because thay don't have me registered on a valid Support Identifier, despite oracle giving me the number. My suspition is that somehow they have not updated the support contracts.
    Anyhow, the result is that I con't get decent resolutions to my problems implementing CM version 13. As I'm downunder in New Zealand and am one of only 2 companies running CM we have little or no support here. I currently get most of my supprt through this forum.
    I have started to look for alternative solutions as I am sick and tired of the lack of support.
    Regards
    Rudi

  • Cisco support for Single Inbox Feature in Exchange 2003 for Unity Connection 8.5

    Hi There,
    Does Cisco support a Unity Connection 8.5 solution/design with the Single Inbox Feature (for Unified Messaging) configured with Exchange 2003, or does it support the Single Inbox feature on Exchange 2010 only?
    Thanks

    Thanks Anthony - I just found an updated doco that confirms that.

  • Cisco support degrading...

    Any one out the feel that Cisco support is degrading? It was a lot better a few years ago. Could it be firing those 10000 staff upset the support team?
    Sent from Cisco Technical Support iPhone App

    I'm sorry but your first sentence is very broad.
    May I request if you can elaborate?  What are you trying to do, what did you experience?  Maybe we can offer some form or alternative.

  • Cisco support group in the Boston Area..

    i would like to know if it is a cisco support group here in the Boston Area, where their meet to do LAB and learn NETWORK.

    Ohh that's cool. Though do you live North of Rt. 9 or South? I know quite a few people who live near Jennings Pond, and Border Rd. Did you grow up here in Natick? I graduated from NHS in 2003. Any kids around my age?

  • If I bring in an iMac not bought thru Apple, can I still purchase the 1 year support contract?

    Hello ~ If I buy a used iMac from a private party, can I purchase the $100 per year Apple Store support contract? I can't get through to the store on the phone! Thanks!

    You are probably thinking about "one to one". That is indeed $99 for a year, but it has to be bought when you buy your Mac.
    But remember, for a 2008 iMac you have the collective resources of the folks who volunteer on these discussions!

  • Cisco Support

    I needed to download the latest firmware for E3000 wireless router.  I first started on Friday night, went to E3000 support page and then to the Download section.  There you are required to input your version.  But for my page I got, it wouldn't allow me to input anything.  I've done this Saturday several time and Sunday several time but get the same results.  To see if the E3000 page was bad, I tried the WRT610 (my old router) download page and got the same thing of not allowing me to input anything.  Am I doing something wrong or is there a problem with Cisco Support?  Any help anyone can give me would be appreciated.
    Solved!
    Go to Solution.

    I went to another computer in the house and was able to download the lastest firmware without any problems.  This tells me I've some type of problem with my main computer.

  • Security patches without paid support contract?

    I've installed S10-u2 on an old E450, and I'm trying to get to the S10 patch cluster. I do not have a paid support contract (and don't particularly intend to get one, either). Is there a way to download the security patches for S10 without a support contract?

    If you register the machine with sun update connection using updatemanager
    but specify you don't have support contract.
    Then updatemanager and smpatch analyze/update should let you download security patches but no others.

  • New Gmail Gadget for Cisco Support Community

    All,
    We've just released a new, free Gmail gadget that brings our community discussions contextually next to your Gmail conversations.
    Pls give it a shot & send us your feedback!
    For more information, see:
    https://supportforums.cisco.com/community/netpro/idea-center/csc-community-news/blog/2012/12/03/cisco-support-community-releases-gmail-gadget-for-google-apps-for-business
    Thanks!
    Tom Yoritaka, Cisco Support Community

    OK I tired this looks like it works on Unity Connect 8.5   Not quite a complete solution.  The media player does not always play the message all the way thru, sometimes it wont play the entire messate.  I want to know in what method is the password encrypted or stored.  I think it has potential but not quite ready for Enterprise

  • Cisco support for the UK DASS signalling protocol on CCME ?

    I have a client who currently has an old Meridian PBX that has a DASS (G.703) connection to the PSTN with 9 channels. I wish to replace this with a 2821-CCME.
    Does Cisco support PSTN connectivity with DASS/G.703 using CCME and a VWIC2-1MFT-G703? If so can you please point me to any configuration guides.
    Thanks in advance,
    Gordon.

    mchandak,
    Honestly I don't know what makes you believe that.
    1) the main protocol/standards used on ISDN PRI are from bottom to top, G.703, G.704, Q.921 and Q.931, no matter if you have H.323, SIP, MGCP or SCCP as VoIP signaling protocol.
    2) CCME can perfectly "control" a gateway using any of above protocol except MGCP.
    3) In the original question, there is no gateway/backend, just one single CCME router.

  • Support contract for DS5.2

    Hi,
    We are migrating from DS5.1 to 5.2 . When I have checked with SUN for getting support contract for DS5.2, they informed that they already announced EOL for 5.2 and suggested me to go with higher version.
    If I move to 6.X versions, can you pls tell me that are there any known bugs in 6.X or can I directly migrate from 5.1 to 6.X
    regards,
    Sri

    While it is true that DSEE 6.2 is out and does provide many improvements with regards to the 5.2 family, you can still buy licenses for Directory Server Enterprise Edition 5.2 (and at least for another 4 to 6 months).
    Note that you can no longer but licenses for Directory Server 5.2 itself. The license (for the same price) is for DSEE which now includes Directory Server, Directory Proxy Server and much more.
    Regards,
    Ludovic.

Maybe you are looking for